Shop by Brand at Competition Motorsport

Racetech Racetech Zinc-Plated Steel Side Mount Brackets $98.00

Racetech Zinc-Plated Steel Side Mount Brackets Racetech zinc-plated, 3mm steel brackets for side-mounting seats. Sold as a pair. These brackets are suitable for use with the following seat models: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RTSaker (with modification) RTRoad RTRoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG

Racing Optics Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack $56.00

Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stack™ 10 (Clear) The XStack™ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear. RAO-10206C Fits: Bell: Dominator.3, GTX.3, GP.3, GT.5 Touring, HP.3, HP5 Touring, B2 Apex, B2 Vision, SE03 Shield, SE05 Shield ROP10203C Fits: HJC H10 & AR10-III

Racing Optics Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets $62.00

Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmet Shields Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287, SRV-8 and Roux R-1 helmets. Protect your Bell or Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Details Qty in one stack: 10 Thickness: 2 mil Stacks in one package: 3 Post centers: 12 1/8" Shape: Banana Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Fitment Guide Fits Bell: Bell 287 SRV Shields Bell GTX.2 Helmets Bell GP.2 Helmets Bell Star Infusion Helmets Bell Dominator.2 Helmets Bell M.8 Composite SA2015/SA2020 Bell M.8 Carbon SA2015/SA2020 Fits Roux: R-1 Fiberglass R-1 Composite R-1 Gloss Carbon R-1 Matte Carbon Racing Optics is a laminated tear off solution for dirt and pavement forms of racing eliminating the need to apply individual tear offs. Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287 SRV and Roux R-1 shields. Protect your Bell and Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to Bell Helmets including the GTX.2, GP.2, Star Infusion, Dominator.2, and all Roux R-1 helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)

Racing Optics Racing Optics (X-Stack) -SE07 $49.00

Racing Optics (X-Stack) - Impact Helmet Shields Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact helmets. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. Racing Optics is a laminated tear-off solution for dirt and pavement forms of racing eliminating the need to apply individual tear-offs. Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact shields. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear-offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to many Impact helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30) Racing Optics (X-Stack) - Impact Helmets Details: Qty in one stack: 10 Thickness: 2 mil Stacks in one package: 3 Post centers: 12 1/8" Shape: Banana Racing Optics (X-Stack) - Impact Helmets Fitment Guide: Bell RS7 Bell HP7 SKU: 10237C

Racing Optics Racing Optics Xstack Perimeter Seal Tear Offs 10208CP (2 mil) $62.00

Xstack Perimeter Seal Laminated Tear-Offs The Perimeter Seal system is the latest technology from Racing Optics that allows for a tighter seal to your helmet visor, keeping dirt, dust and water from getting behind the tear-off stack. An XStack is a stack of 10 laminated tear-offs that are 2 mil (0.002" or 0.05 mm) thick each. The laminated technology creates a distortion-free optical lens. Each package contains three stacks of ten clear tear-offs for a total of 30 tear-offs. Xstack Perimeter Seal Tear-Off Pack Details Manufacturer: Racing Optics Manufacturer part no.: 10208CP Tint: clear Thickness (ea.): 2 mil (0.002"/0.05 mm) Post spacing: 12 1/8" (308 mm) Total tear-offs: 30 Fits the Following Helmets: Bell: BR8, Dominator.2, GTX.2, GP.2, GP.2 Youth, M.8, 287 Shield, Star GP, Star Infusion G-Force: Revo, Rift, Rookie Roux: R1-F Zamp: FS-2, Z-15 Shield, Z-20 Shield, Z-70, FS1.2 RZ

Racing Radios Racing Radio Foam Earbuds $140.00

Racing Radio Foam Ear Buds, Universal For the purpose of hygiene and safety, this product is not eligible for return. Foam driver earpieces by Racing Radios. Designed with ultra-high noise transducers. Plugs directly into your helmet (equipped with optional 3.5mm jack) and has a 19-inch wiring lead. This is the industry standard foam earpiece used by Racing Radios for over 30 years. Racing Radio Foam Ear Buds Details Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS Helmet connection: Universal 3.5mm Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: Pro If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done. Racing Radios is considered the go to for professional race teams of all series, with quality that is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.

Racing Radios Racing Radio Foam Earbuds European RCA Male Plug $168.00

Racing Radio Foam Ear Buds European RCA Male Plug For the purpose of hygiene and safety, this item is not eligible for return. Foam driver earpieces for European RCA-style helmet connections. In the USA we use a male 3.5mm TRS connector to connect to our earbud jack, but in many European series the wiring protocol is based on the RCA-style connection. Racing Radios RR-CE31-A/FOAMS-RCA has a 19-inch (48 cm) wiring lead and industry-standard foam earpieces used by Racing Radios for over 30 years. Racing Radio Foam Ear Buds Details Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS-RCA Helmet connection: European RCA Male Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: European Pro This is a very special item only used in European racing series and will not work with most US radio components. If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done. Racing Radios is considered the go to for professional race teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.

Racing Radios Racing Radio Replacement Foam for Earbuds $14.00

Racing Radio Replacement Foam for Ear Buds For the purpose of hygiene and safety, this product is not eligible for return. If you have a set of in-ear buds on which the foam is starting to get worn and/or dirty, this kit is the direct replacement to easily bring your earbuds back to the like-new dB lowering, comfortable fit once again. How to replace the foam on the end of your current earpieces: Cut the old foam earpieces using a new razor blade - slicing like a banana without cutting the wire, transducer, or sound tube Peel off the foam and use your finger nail or the edge of tweezers to remove the remaining glue Insert the tweezers into the foam hole and stretch the hole from the flat side of the foam for 30 seconds Slide the transducer into the elongated hole until the sound tube is near the end of the round part and let sit for 1 minute Put a micro dot of super glue on the wire to foam connection on flat side and you are done Racing Radio Replacement Foam for Ear Buds Details Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS-COVERS Quantity in kit: two

Racing Radios Racing Radio Velcro Earpiece Mount Tab Kit $14.00

Racing Radio Earpiece Mount Tab Kit Racing Radio Earpiece Mount Tab Kit uses a hourglass shaped tab to wrap around your earbud jack that secures to a matching tab (included) that you mount inside your helmet against the inside shell. This kit allows for securely mounting your Racing Radios ear bud jack to your helmet with no drilling. Racing Radio Earpiece Mount Tab Kit Details: Manufacturer: Racing Radios Manufacturer part number: VELCRO-TAB

Racing Radios Racing Radios (IMSA) Car Harness Base Unit (Rear) $329.00

Racing Radios Four Conductor (IMSA) In-Car Racing Radio Car Harness (Rear) Racing Radios 4 Conductor (IMSA) wiring in-car radio harness for Motorola mobile radios. Plugs directly into the REAR 16 pin accessory jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. Racing Radios (IMSA) Car Harness Base Unit (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-100010B-R Helmet connection: IMSA 4 Conductor PTT connection: 3 Pin chrome barrel connector Radio connection: Motorolla 16 pin rear push-in Racing Radios (IMSA) Car Harness Base Unit (Rear) Wiring Lengths: Black junction box length: 3" Black junction box to 16 Pin connector: 24" Black Juction Box to IMSA Helmet connector: 60" Black junction box to PTT: Connector: 84" If you have a Motorola Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness.

Racing Radios Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) $336.00

Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) In-Car Radio Car Harness By Racing Radios for Motorolla MOTOTRBO XPR base unit radios. Having a special 16pin connector that connects to your Motorola MOTOTRBO XPR base unit radio and splits to 4 Conductor (IMSA) for your driver and standard 3 pin PTT connection. This is a special harness compatible only with Motorolla MOTOTRBO XPR series radios. [img-13367-left-large_default] Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-RCH-XPR-M Helmet connection: IMSA 4 Conductor PTT connection: 3 Pin chrome barrel connector Radio connection: Motorolla 16 pin rear push-in Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) Lengths: Black junction box length: 3" Black junction box to 16 Pin connector: 24" Black Juction Box to IMSA Helmet connector: 60" Black junction box to PTT; connector: 84" If you have a Motorola MOTOTRBO XPR Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness. [img-13367-left-large_default]

Racing Radios Racing Radios 3-C NASCAR Helmet Coil Cord $147.00

Racing Radios 3/C NASCAR Helmet Coil Cord 3-conductor NASCAR coiled cable for your helmet kit. By using a coiled cord, the driver can have greater mobility, even with the tight head containment seats used in modern race cars. The helmet side is 3.5mm and 3C (3 Conductor) and looks similar to an electric guitar or of you are old enough, 8 track headphones. Racing Radios 3/C NASCAR Helmet Coil Cord Details: Manufacturer: Racing Radios Manufacturer part number: RR-HKP-121020 End 1 fitting: 3.5mm 3 conductor End 2 fitting: 4 gold plated terminals (male) [img-2310-left-large_default]

Racing Radios Racing Radios 3-C NASCAR Helmet Kit (Coil) $280.00

Racing Radios 3/C NASCAR Style Helmet Kit (Coil) 3/Conductor NASCAR Coil Cord By Racing Radios Allows the driver to have some movement with the helmet. The kit comes with 3.5mm earpiece connection and top of the line noise canceling microphone. *Comes with installation instructions and mounting hardware*

Racing Radios Racing Radios 4-C IMSA Helmet Coil Cord $101.00

Racing Radios 4/C IMSA Helmet Coil Cord Racing Radios 4 Conductor IMSA Helmet Coil Cord. This IMSA coiled cable for your helmet kit makes driver changes even easier by allowing you more movement to prevent accidental disconnects. If you have a head containment seat, this is a necessary item as the straight cord becomes bound up on the head containment portion of your race seat. Racing Radios IMSA Helmet Coil Cord (4 Conductor) Details Manufacturer: Racing Radios Manufacturer part number: HKP-1214010-H Car Harness End: IMSA (4 Conductor) Helmet End: Open (4 wires) Straight or Coiled: Coiled Gold Tipped Connections: Yes Entry level or Pro: Pro

Racing Radios Racing Radios 4-C IMSA Helmet Kit (Coil Cord) $280.00

Racing Radios 4/C IMSA Style Helmet Kit with Coil Cord 4 Conductor IMSA Coil Cord Helmet Kit By Racing Radios is used mostly in sports car racing - IMSA, NASA, ChampCar, SCCA, and more. The coiled cable allows the driver to have some movement with the helmet. Comes with 3.5mm earpiece connection and top of the line noise canceling microphone. Racing Radios 4/C IMSA Helmet Kit with Coil Cord Details: Manufacturer: Racing Radios Manufacturer part number: HK4C-COIL Coil cord: IMSA Microphone: Mini noise cancelling Instillation kit included: Yes Instructions included: Yes

Racing Radios Racing Radios 4C IMSA Helmet Kit (Coil) - EZ Install $294.00

Racing Radios 4C IMSA Style Helmet Kit (Coil) - EZ Install This four-conductor IMSA coiled cord helmet kit by Racing Radios is used mostly in sports car racing (IMSA, Grand-Am, SCCA, etc.) The coiled cable allows the driver to have some movement with the helmet, adding to the durability of the overall kit. Comes with 3.5mm earpiece connection and top of the line noise canceling microphone. Racing Radios 4C IMSA Helmet Kit (Coiled) Details: Manufacturer: Racing Radios Manufacturer part number: HKP-4C-EZ Coil cord: IMSA Microphone: Mini noise cancelling Instillation kit included: Yes Instructions included: Yes Velcro tab included: Yes The Racing Radios 4C IMSA EZ Install kit with coil cord is the new gold standard for in-helmet wiring kits. No drilling into the helmet shell or janky wire connections. The earpiece jack and IMSA connector cord are already connected, and the velcro tab gives you the ability to position the earpiece wherever you like, providing flexible movement without damaging your earbuds. The only piece that needs to be connected is the microphone into the earpiece and IMSA cords. Comes with installation instructions and mounting hardware

Find anything you need

Brand