A1-271 GiroDisc Chevrolet Camaro SS 1LE (6th Gen) Front Rotors
$1,893.00
A1-271 GiroDisc Chevrolet Camaro SS 1LE (6th Gen) Front Rotors
These GiroDisc 2-piece front rotors are a direct replacement for the factory Camaro SS 1LE (6th Gen) brake package and also work on base cars equipped with the Chevrolet Performance brake kit. The floating design reduces unsprung and rotational mass while retaining OEM calipers, ABS, and brake bias.
Vehicle Fitment
Chevrolet Camaro SS 1LE (6th Gen) – Front
Chevrolet Camaro (6th Gen) with Chevrolet Performance front brake kit – Front
Design & Cooling
The central hat is CNC machined from U.S.-sourced 6061-T6 aluminum and anodized for durability. Rings are poured and machined in the USA from proprietary high‑carbon iron and use curved vanes to pull cooling air through the disc during hard use.
Features
Direct OE replacement; no permanent modifications required
2‑piece floating construction reduces unsprung & rotational mass
High‑strength, cadmium‑plated steel drive pins with spring hardware
Reusable aluminum hats; ring‑only service when worn
Sold/priced per pair
A2-271 GiroDisc Chevrolet Camaro SS (6th Gen) Rear Rotors
$1,747.00
GiroDisc Chevrolet Camaro SS (6th Gen) Rear Rotors
The GiroDisc A2-271 Rear Rotors are a precision-engineered, direct replacement for the OEM discs on the sixth-generation Chevrolet Camaro SS. Designed to enhance braking performance, reduce weight, and improve cooling, these 2-piece floating rotors deliver track-ready reliability and street-friendly refinement—all while retaining factory fitment and ABS function.
Lightweight Construction & Improved Cooling
By upgrading to GiroDisc’s two-piece rotor design, you eliminate unnecessary rotational mass. The lightweight 6061-T6 aluminum hat significantly reduces unsprung weight, improving suspension response and acceleration. The cast-iron outer rings are produced from GiroDisc’s proprietary high-carbon alloy, featuring curved internal vanes that act as a centrifugal pump to draw cooling air through the rotor—perfect for high-performance driving and track sessions.
Race-Grade Floating Mount System
The rotors utilize a fully floating mount system that connects the rotor ring to the hat via 10 high-strength alloy steel drive pins. Each pin is cadmium-plated for corrosion resistance and secured with class 12.9 cap screws and hardened washers. GiroDisc incorporates anti-noise spring washers to allow thermal expansion while maintaining a rattle-free, quiet operation suitable for both street and track use.
Vehicle Fitment
Chevrolet Camaro SS (6th Generation, 2016+)
Compatible with factory rear calipers
No modifications required — direct bolt-on replacement
Technical Specifications
CMS Number: A2-271
Position: Rear
Design: 2-piece floating rotor
Material: High-carbon cast iron ring with 6061-T6 aluminum hat
Vane Design: Curved directional vanes
Hardware: Cadmium-plated steel drive pins, class 12.9 cap screws
Rebuildable: Yes — replace the rotor rings, reuse the hats
Sold/Price: Per pair
FAQs for the GiroDisc A2-271
Are these rotors a direct fit? Yes, the GiroDisc A2-271 rear rotors are a direct bolt-on replacement using the OEM calipers and hardware—no modifications needed.
Do they improve braking performance? Absolutely. The reduced rotational mass improves throttle response and suspension compliance, while the curved vanes enhance cooling and fade resistance.
Are they noisy? No. The floating hardware design uses anti-noise spring washers to eliminate rattle and vibration during street driving.
Are these rotors rebuildable? Yes. The rotor rings can be replaced independently, allowing cost-effective rebuilds and extended service life.
Upgrade your Chevrolet Camaro SS (6th Gen) with GiroDisc’s lightweight, performance-engineered rear rotors for improved stopping power, cooling efficiency, and long-term value.
Cobalt Racing Brake Pads BGT6D65 (Front)
$902.00
Cobalt Front Brake Pads
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Fits the Following Cars (Front):
Camaro SS w/ 6-Piston Brembo (2016-2019)
Camaro ZL1 (2012-2015)
Corvette C8 Z06 Iron Rotor (2022+)
Corvette C7 Z06
Corvette C7 Z07 w/ Iron Rotors Conversion
Dodge Viper ACR w/ Iron Rotors Conversion (2014-2017)
Mercedes C63 AMG Black Series
Pagid 8208 Racing Brake Pads
from $668.00
Pagid Racing Brake Pads 8208
Pagid 8208 Brake Pad Fitment Guide
Make
Model
Years
Front
Rear
Chevrolet
Camaro SS [Gen 6] 4-piston Brembo caliper
2016 -
X
Chevrolet
Camaro SS [Gen 6] 6-piston Brembo caliper - upgrade kit
2016 -
X
Chevrolet
Camaro SS 1LE [Gen 6] 6-piston Brembo
2016 -
X
Chevrolet
Camaro GT4 R [race car]
2017 -
X
Chevrolet
Corvette C7 base
2013 - 20
X
Chevrolet
Corvette C7 Z06 [iron brakes]
2015 -
X
Chevrolet
Corvette C7 Z51
2014 -
X
Ford
Mustang Shelby GT350 [6-piston Brembo caliper / 15.5-inch rotor]
2015 -
X
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid RSL 19-5 Compound
Pagid RSL 19-5 has a slightly higher and more aggressive coefficient of friction and a stronger initial bite compared to RSL 19. Often used on the rear axle of heavier GT3 and GTE cars to fine-tune brake bias. It can also be used on the front of lighter cars for a more aggressive feel than RSL 19.
Pagid RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
GiroDisc GP-Series Pads No. 592 (Front)
from $656.00
GiroDisc GP-Series Pads No. 592 (Front)
The GiroDisc GP-Series No. 592 front pad family delivers precise fitment and confident braking for Brembo-equipped performance applications using the D592 pad shape. Available in GP10 street, GP35 all-around race, and GP40 sprint race compounds, these pads let you tailor bite, heat capacity, and rotor friendliness to your driving style. Whether you daily-drive the car, run frequent HPDE events, or push in sprint races, there is a 592-series compound that fits your needs.
Fits the Following Vehicles
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vanquish
03 - 08
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Cadillac
CTS-V (6 piston front caliper)
10 - 14
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro ZL1 [Gen 5]
12 - 15
X
Chevrolet
Camaro ZL1 and ZL1 1LE [Gen 6]
16 -
X
Dodge
Challenger HellCat & 392
15 -
X
Dodge
Viper
01 - 02
X
Ferrari
360 all models
99 - 05
X
X
Ferrari
F430 [cast iron brakes]
05 - 10
X
X
KTM
X-Bow
08 -
X
Lancia
Delta 2.0 HF Int.16V Evo
91 - 94
X
Lotus
Esprit Turbo
94 - 96
X
X
Maserati
Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm]
13 -
X
Maserati
Grand Turismo
07 -
X
Peugeot
406 Coupe Brembo brake
97 - 04
X
Renault
Clio II 3.0 V6 mid engine
00 - 05
X
X
Seat
Leon 1.8T Cupra R (Brembo)
03 - 06
X
Seat
Leon 2.8 Cupra 4 (Brembo)
01 - 06
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Features
Multiple compounds available to match street, HPDE, and sprint racing use
Direct-fit 592 pad shape for popular Brembo performance calipers
Consistent pedal feel and modulation across a wide temperature range
Dedicated iron-rotor formulation for reliable performance on track
Available as a complete axle set for the front brakes
Compound Overview
GP10 Street Pads for 592 Shape – GP10-0592.15Designed for performance-minded street drivers, GP10 semi-metallic pads balance daily drivability with the ability to handle occasional track sessions. They offer reduced noise and dust compared to full race pads while still delivering responsive pedal feel and solid stopping power when you pick up the pace. For drivers planning frequent or extended track use, GiroDisc recommends stepping up to a dedicated race compound for better high-heat durability.
GP35 Race Pads for 592 Shape – GP35-0592.15GP35 is the all-around race compound that blends the bite of sprint pads with the durability of endurance pads. It beds quickly and is designed to work with both street car ABS and motorsport-grade ABS. A smooth, linear torque curve gives excellent modulation and release under trail braking, making GP35 a favorite for advanced HPDE drivers and cars competing in a wide range of professional and club racing series.
GP40 Sprint Race Pads for 592 Shape – GP40-0592.15GP40 is a sprint-focused compound that offers strong race-ready bite without punishing your rotors. Sitting between a pure sprint and endurance formulation, it maintains good pedal feel and heat capacity while remaining relatively rotor friendly. These pads have been proven in demanding sprint and long-distance events and are ideal for drivers who want aggressive braking performance with controlled wear.
Specifications
• Pad Shape: 592 (D592 pattern)• Position: Front• Available Compounds: GP10 performance street, GP35 all-around race, GP40 sprint race• Thickness: 15 mm (592.15 specification)• Rotor Type: Iron rotors only• Sold as: One front axle set
GiroDisc GP-Series 592 Pad FAQs
Which compound should I choose for a mostly street-driven car with occasional track days? GP10 is the best fit for primarily street use with light track work. It offers quieter operation and lower dust than the race pads while still giving you confident braking when you drive harder.
When is GP35 the right choice? Choose GP35 if you run frequent HPDE events or club racing and want a single race pad that can handle a wide range of tracks and tires. It offers strong bite, good life, and excellent modulation, making it a versatile “do-it-all” race option.
Who should run GP40? GP40 is aimed at more serious sprint-race and aggressive track drivers who want a higher-friction feel and strong initial bite while still keeping rotor wear under control. It’s a great option if you’re chasing lap times and running shorter, intense sessions.
Are these pads compatible with carbon-ceramic rotors? No. All GP10, GP35, and GP40 592 pads are designed specifically for iron brake rotors and should not be used with carbon-ceramic (CCB) systems.
Do these pads work with factory ABS and stability control? Yes. The GP-series compounds are formulated to work properly with modern ABS and stability-control systems when matched to appropriate tires and properly bedded in.
Upgrade your Brembo-equipped performance car with GiroDisc GP-Series 592 pads and choose the compound that matches how you drive—whether that’s daily commuting, flat-out sprint racing, or something in between.
Pagid Racing 2487 Brake Pads (Front)
from $631.00
Pagid Racing Brake Pad Shape 2487
Fitment Guide Pagid 2487 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] FK2, FK8
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid Racing 2487 Brake Pad RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid Racing 2487 Brake Pad RSL 1 Compound
Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.
Pagid Racing 2487 Brake Pad RST 1 Compound
Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.
Pagid Racing 2487 Brake Pad RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Pagid Racing 2487 Brake Pad RST 4 Compound
RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.
Performance Friction PFC 7781 Brake Pads (Front)
$605.00
Performance Friction PFC Racing Brake Pad Shape 7781
Fitment Guide PFC 7781 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] Gen IX and X
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
Performance Friction Compound Performance Graph
Performance Friction Brake Compounds
The Performance Friction PFC 7781 racing brake pad features a specialized backing plate and friction surface designed for compatible high-performance brake calipers. With a 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and 15 mm friction material thickness, the PFC 7781 provides a precisely defined pad shape for demanding motorsport braking applications.
Available through Competition Motorsport, the PFC 7781 is designed for drivers and racing teams seeking Performance Friction braking technology for HPDE, track days, club racing, and competitive motorsport. Selecting the correct pad shape and friction compound is essential for achieving predictable braking response, proper caliper fitment, and consistent performance.
PFC 7781 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 7781
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Friction Material Thickness: 15 mm (excluding backing plate)
Friction Surface: Curved profile with two angled grooves
Application: Compatible performance and motorsport brake calipers
Precision PFC 7781 Brake Pad Geometry
The PFC 7781 features two upper mounting holes, a distinctive backing plate profile, and a curved friction surface with two angled grooves. Its shallow concave lower edge and specialized mounting geometry distinguish it from other racing brake pad shapes.
These details are important when identifying replacement brake pads, particularly for vehicles equipped with aftermarket racing calipers or optional high-performance brake systems.
Performance Friction Racing Brake Technology
Performance Friction develops advanced racing brake pads and braking systems for demanding motorsport applications. Its competition-focused friction materials are engineered to deliver braking characteristics suited to different vehicles, operating temperatures, and racing requirements.
Depending on the selected compound, PFC racing brake pads can offer different combinations of initial bite, brake torque, modulation, temperature stability, and wear characteristics.
Why Choose PFC 7781 Racing Brake Pads?
Precision backing plate geometry for compatible racing calipers
132 mm overall width and 77 mm overall height
62 mm friction material depth
15 mm friction material thickness
Distinctive dual-groove friction surface
Performance Friction motorsport braking technology
PFC 7781 Brake Pad Fitment and Compatibility
Correct brake pad fitment requires matching the backing plate outline, mounting-hole locations, friction surface geometry, and pad thickness to the vehicle's brake caliper.
Before ordering, compare your existing pads with the PFC 7781 technical drawing. Confirm the 132 mm overall width, 77 mm overall height, 62 mm friction depth, and 15 mm friction material thickness.
The 15 mm thickness measurement excludes the steel backing plate. It should not be confused with the complete assembled brake pad thickness.
Vehicle make and model alone may not establish compatibility, particularly when aftermarket racing calipers or optional performance brake packages are installed.
Frequently Asked Questions About PFC 7781 Brake Pads
What are the dimensions of the PFC 7781 brake pad?
The PFC 7781 measures 132 mm wide by 77 mm high, with a 62 mm friction material depth and 15 mm friction material thickness excluding the backing plate.
Does the 15 mm thickness include the backing plate?
No. The 15 mm measurement refers exclusively to the friction material thickness. The steel backing plate is not included.
How do I identify the PFC 7781 pad shape?
The 7781 features two upper mounting holes, a curved friction surface, two angled friction grooves, and a shallow concave lower edge. Compare these features and the dimensions with your existing brake pads.
Are PFC 7781 brake pads suitable for track days?
The PFC 7781 pad shape may be used in compatible performance braking systems. Suitability for track days or racing depends on the selected friction compound, vehicle configuration, and operating conditions.
Can I use PFC 7781 brake pads with aftermarket calipers?
Yes, provided the aftermarket caliper requires the PFC 7781 backing plate geometry and appropriate pad thickness. Always confirm compatibility before ordering.
Buy PFC 7781 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, motorsport braking components, and professional racing equipment for HPDE enthusiasts, track-day drivers, club racers, and professional race teams.
Contact our motorsports specialists for assistance confirming PFC 7781 fitment and selecting the appropriate friction compound for your vehicle and braking requirements.
Racing Technologies P1012 Brake Pads (Front)
from $581.00
Racing Technologies P1012 Brake Pads (Front)
Fitment Guide Racing Technologies P1012 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 19
X
Chevrolet
Corvette C7 Z51
14 - 19
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] Gen IX and X
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
The Race Technologies P1012 brake pad is a performance-focused pad shape engineered for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth and 15 mm pad thickness, the P1012 features a distinctive backing plate profile and curved friction surface designed for demanding braking applications.
Competition Motorsport offers the Race Technologies P1012 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for a track weekend or competitive racing, choosing the correct pad shape and compound is essential for predictable, consistent braking performance.
Race Technologies P1012 Brake Pad Specifications
Pad Shape: P1012
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Pad Thickness: 15 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound
The P1012 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its specialized mounting geometry makes accurate shape identification important when replacing existing brake pads or selecting friction materials for compatible performance calipers.
Always compare the P1012 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 provides a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking performance across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1012 compound depends on the vehicle's intended use and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1012 Brake Pads?
The Race Technologies P1012 combines a 132 mm overall width with a 77 mm height, 62 mm friction material depth, and 15 mm thickness. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible high-performance braking systems.
Distinctive Race Technologies P1012 backing plate geometry
132 mm overall width and 77 mm overall height
62 mm friction material depth
15 mm nominal pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1012 Brake Pad Fitment
The Race Technologies P1012 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, 15 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1012 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1012 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Performance Friction PFC 1854 Racing Brake Pads
$499.00
Performance Friction PFC 1854 Racing Brake Pads
PFC 1854 Brake Pad Fitment Guide
Make
Model
Years
Front
Rear
Chevrolet
Camaro SS [Gen 6] 4-piston Brembo caliper
2016 -
X
Chevrolet
Camaro SS [Gen 6] 6-piston Brembo caliper - upgrade kit
2016 -
X
Chevrolet
Camaro SS 1LE [Gen 6] 6-piston Brembo
2016 -
X
Chevrolet
Camaro GT4 R [race car]
2017 -
X
Chevrolet
Corvette C7 base
2013 - 20
X
Chevrolet
Corvette C7 Z06 [iron brakes]
2015 -
X
Chevrolet
Corvette C7 Z51
2014 -
X
Ford
Mustang Shelby GT350 [6-piston Brembo caliper / 15.5-inch rotor]
2015 -
X
The Performance Friction PFC 1854 racing brake pad is a specialized motorsport friction solution designed for compatible high-performance brake calipers requiring the 1854 backing plate shape. Measuring 109.8 mm wide with a 47.0 mm friction material depth and 15 mm friction material thickness, the PFC 1854 combines precise pad geometry with Performance Friction's competition-focused Compound 332 technology.
Available from Competition Motorsport in PFC 332 racing compound, the 1854 is an excellent option for motorsport braking systems where controlled rear-axle brake torque, ABS compatibility, and predictable braking characteristics are priorities. Its distinctive backing plate profile and specialized friction material make accurate pad identification essential when preparing a vehicle for track days, sprint racing, or endurance competition.
PFC 1854 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 1854
Overall Width: 109.8 mm
Friction Material Depth: 47.0 mm
Friction Material Thickness: 15 mm (excluding backing plate)
Available Compound: PFC 332
Primary Compound Application: Rear axle
Intended Use: Motorsport, circuit racing, and compatible ABS-equipped competition vehicles
The PFC 1854 features a compact backing plate with two upper retaining holes, a gently arched upper friction surface, and a shallow concave lower edge. The backing plate includes distinctive raised mounting sections surrounding the retaining holes, making the 1854 easy to distinguish from other similarly sized racing brake pad shapes.
Always compare the PFC 1854 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
PFC 332 Racing Compound – ABS-Friendly Rear Brake Performance
Performance Friction Compound 332 is a degressive racing brake friction material developed for rear-axle applications. Engineered to support modern racing ABS systems, PFC 332 emphasizes controlled brake torque, predictable braking response, and favorable pad and rotor wear characteristics.
The compound's degressive friction behavior helps manage braking response as operating conditions change. This makes PFC 332 particularly attractive for competition vehicles where rear brake stability, consistent pedal response, and proper interaction with the ABS system are important.
Unlike compounds developed primarily for aggressive front-axle braking, PFC 332 is formulated to support the specific requirements of rear braking systems, where excessive brake torque can negatively affect vehicle balance and stability.
Benefits of PFC 332 Brake Compound
Rear-Axle Performance: Developed specifically for compatible rear racing brake applications.
ABS-Friendly Friction: Degressive friction characteristics designed to support modern racing ABS systems.
Controlled Brake Torque: Helps maintain predictable rear braking behavior under demanding conditions.
Low Wear Characteristics: Engineered for favorable pad and rotor wear performance.
Consistent Modulation: Designed to provide controlled braking response during repeated heavy braking.
Motorsport-Focused Design: Intended for competition braking systems operating under demanding track conditions.
Why Choose Performance Friction PFC 1854 Brake Pads?
Performance Friction has built a strong reputation in professional motorsport through the development of advanced racing brake friction materials and complete braking systems. The PFC 1854 combines specialized backing plate geometry with Compound 332's rear-axle-focused friction characteristics.
Its compact 109.8 mm width, 47.0 mm friction material depth, and 15 mm friction material thickness make it a specialized replacement option for compatible high-performance brake calipers.
Precision PFC 1854 backing plate geometry
109.8 mm overall width
47.0 mm friction material depth
15 mm friction material thickness, excluding backing plate
PFC 332 degressive racing friction compound
Designed for compatible motorsport braking systems
PFC 1854 Brake Pad Fitment and Compatibility
The Performance Friction 1854 pad shape is intended for brake calipers requiring its specific backing plate geometry, retaining-hole locations, and friction material dimensions. Proper fitment depends on caliper design, brake system configuration, and the required assembled pad thickness.
Before ordering, verify the 109.8 mm overall width, 47.0 mm friction material depth, 15 mm friction material thickness, and mounting-hole geometry against your existing brake pads or caliper manufacturer's technical specifications.
The 15 mm measurement refers only to the friction material and does not include the steel backing plate. This distinction is important when comparing brake pad thickness specifications.
Vehicle make and model alone may not establish compatibility, particularly when aftermarket racing calipers or optional performance brake systems are installed.
Frequently Asked Questions About PFC 1854 Brake Pads
What compound is available for the PFC 1854 brake pad?
Competition Motorsport offers the PFC 1854 brake pad in Performance Friction Compound 332, a degressive racing friction material developed for rear-axle applications.
What makes PFC Compound 332 different from other racing compounds?
PFC 332 is designed with degressive friction characteristics that support controlled rear brake torque, ABS compatibility, and favorable pad and rotor wear. It is particularly suited to compatible motorsport rear braking systems.
Is the PFC 1854 suitable for endurance racing?
PFC 332 is a competition-oriented compound that may be suitable for endurance applications when matched to the vehicle's braking system, operating temperatures, brake balance, and racing requirements.
Does the 15 mm pad thickness include the backing plate?
No. The specified 15 mm thickness refers exclusively to the friction material. The steel backing plate is not included in this measurement.
How can I confirm that PFC 1854 brake pads fit my calipers?
Compare your existing pads with the PFC 1854 technical drawing. Confirm the 109.8 mm overall width, 47.0 mm friction material depth, 15 mm friction thickness, backing plate outline, and retaining-hole positions before ordering.
Can PFC 1854 Compound 332 brake pads be used on the street?
PFC 332 is a racing friction material intended primarily for motorsport applications. Competition brake pads may produce additional noise and dust and may not provide ideal braking characteristics at normal street operating temperatures.
Buy PFC 1854 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, high-performance braking components, and professional motorsport equipment for HPDE enthusiasts, track-day drivers, club racers, and professional race teams.
Order PFC 1854 racing brake pads in Compound 332 for your compatible braking system, or contact our motorsports specialists for assistance confirming fitment and selecting the correct racing brake components for your application.
Cobalt Racing GM6 Brake Pads
$479.00
Cobalt GM6 Racing Brake Pads
Cobalt GM6 Brake Pad Fitment Guide
Manufacturer
Model
Build (Year)
Front
Rear
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Camaro SS [Gen 6] 6 Piston Brembo caliper - upgrade kit
16 -
X
Chevrolet
Camaro SS 1LE [Gen 6] (6 piston Brembo)
16 -
X
Chevrolet
Camaro GT4 R [race car]
17 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z06 [iron brakes]
15 -
X
Chevrolet
Corvette C7 Z51
14 -
X
Ford
Mustang Shelby GT350 [6 piston Brembo caliper / 15.5 disc]
15 -
X
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Carbotech CT1474 Brake Pads
from $455.00
Carbotech CT1474 Brake Pads
Carbotech CT1474 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
DB11 [cast iron brakes]
16 - 23
X
Aston Martin
Vantage [cast iron brakes] street car
18 -
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C6 Brembo 6 piston non ceramic
09 - 13
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
X
Ford
GT
04 - 06
X
X
Ford
Ford GT (second generation) ceramic brakes
17 -
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15 disc]
07 - 14
X
Honda (Acura)
Civic Type R [Brembo brakes] IX and X generation
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4 piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Renault
Mégane III 2.0 RS [Brembo brakes] without electronic hand brake
08 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT1474 Brake Pads FAQs
How do I know if CT1474 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT1474 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.
Race Technologies P1013 Brake Pads (Front)
from $436.00
Race Technologies P1013 Brake Pads (Front)
Fitment Guide Race Technologies P1013 / 1404 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] Gen IX and X
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
The Race Technologies P1013 brake pad features a distinctive wide-format backing plate designed for compatible high-performance brake calipers. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth, the P1013 combines a curved friction surface with two angled friction grooves and specialized mounting features for demanding performance driving and motorsport applications.
Competition Motorsport offers the Race Technologies P1013 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, selecting the correct pad shape and compound is essential for proper fitment and predictable braking performance.
Race Technologies P1013 Brake Pad Specifications
Pad Shape: P1013 / 1404
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
The P1013 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers.
Always compare the P1013 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1013 brake compound depends on how the vehicle is used and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1013 Brake Pads?
The Race Technologies P1013 combines a 132 mm overall width with a 77 mm height and 62 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems.
Distinctive Race Technologies P1013 backing plate geometry
132 mm overall width and 77 mm overall height
62 mm friction material depth
Two angled friction grooves shown in the technical drawing
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1013 Brake Pad Fitment
The Race Technologies P1013 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1013 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1013 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Carbotech CT1001 Brake Pads
from $367.00
Carbotech CT1001 Brake Pads
Carbotech CT1001 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
DB11 [cast iron brakes]
16 - 23
X
Aston Martin
Vantage [cast iron brakes] street car
18 -
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C6 Brembo 6 piston non ceramic
09 - 13
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
X
Ford
GT
04 - 06
X
X
Ford
Ford GT (second generation) ceramic brakes
17 -
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15 disc]
07 - 14
X
Honda (Acura)
Civic Type R [Brembo brakes] IX and X generation
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4 piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Renault
Mégane III 2.0 RS [Brembo brakes] without electronic hand brake
08 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT1001 Brake Pads FAQs
How do I know if CT1001 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT1001 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.
Carbotech CT1718 Brake Pads
from $356.00
Carbotech CT1718 Brake Pads
Vehicle Fitment
Make
Model
Build (Year)
Front
Rear
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Camaro SS [Gen 6] 6 Piston Brembo caliper - upgrade kit
16 -
X
Chevrolet
Camaro SS 1LE [Gen 6] (6 piston Brembo)
16 -
X
Chevrolet
Camaro GT4 R [race car]
17 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z06 [iron brakes]
15 -
X
Chevrolet
Corvette C7 Z51
14 -
X
Ford
Mustang Shelby GT350 [6 piston Brembo caliper / 15.5 disc]
15 -
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT1718 Brake Pads FAQs
How do I know if CT1718 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT1718 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.