E92 M3/E82 1M

CMS Performance RF1 DOT4 Racing Brake Fluid Real Life 622º Boiling Point Without the Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 622º F / 328º C, RF1 exceeds all DOT 3 & DOT 4 requirements and is compatible with all DOT 3, DOT 4, and DOT 5.1 fluids. Note: RF1, like all DOT 4 brake fluids, is not compatible with DOT 5 silicone-based or any mineral-based brake fluids. On the race track, there is perhaps no single safety system more important than your brakes. No single part of that system is more critical than brake fluid, given the extraordinarily high temperatures it operates under. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. We found more than a few brands whose product was all hype and not high performance. No Hype. All Performance. No Kidding. So we did something about it. CMS Performance RF1 is manufactured in partnership with Orthene, maker of the also-excellent Halo P1 racing brake fluid and a brake fluid supplier to many racing teams in Formula 1, WEC, and other professional series. RF1 was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend a lot more on brake fluid, but it's hard to find higher-performance than RF1 Racing Brake Fluid. CMS Performance RF1 Racing Brake Fluid Details: Manufacturer: CMS Performance Manufacturer part no.: CMSRF1 Typical dry boiling point: 622º F / 328º C Typical wet boiling point: 399º F / 204º C Exceeds DOT 3 & DOT 4 standards Bottle size: 500 ml (16.9 fl. oz.) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Brembo Front 380mm x 34mm CCM-R Rotors & Six-Piston GT-R Calipers For: BMW M3 Sedan (E90) BMW M3 Coupe (E92) BMW M3 Convertible (E93) The Most Sophisticated High Performance Braking System Ever Manufactured for Your BMW M3 This is a lightweight carbon ceramic 2-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System performance combines superior wear (5x longer than iron), increased thermal capacity, and the extremely lightweight characteristics of CCM-R for an extremely versatile and durable system on or off the track.Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everday driving and demanding track-day sessions. The heart of the kit consists of monoblock aluminum calipers, machined from a single billet of cast aluminum to ensure outstanding rigidity and minimized deformation under heavy braking. The 2-piece floating rotors supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled finishes are designed and executed with meticulous precision. These holes in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for the M3 (E90/92/93), TUV/DOT homologated metal-braided hoses, plus an adapter and high-quality fastener hardware complete the kit. Racing-Derived Monoblock Calipers in Billet Aluminum Lightweight, rigid and resistant to high temperatures, Brembo's GT-R calipers are made from billet aluminum with a radial 6-piston arrangement. They reduce unsprung weight, improving suspension dynamics and vehicle performance.These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum. Brembo GT-R calipers are nickel plated to guarantee protection against corrosion, providing longveity and high quality in the field. The Brembo logo is CNC machined in red embossing. Two-Piece CCM-R Rotors Reduce Weight and Dissipate Heat GT-R braking systems include 2-piece floating discs which reduce unsprung weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 380mm in diameter and 34mm thick. Pads Provide Optimum Performance in Various Conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. These offer optimum performance in various driving conditions, both on and off the race track. The GT-R kit includes all the necessary hardware such as billet brackets and installation adaptors, as well as stainless steel Goodridge brake lines, to guarantee a seamless installation. Brembo Front 380x34 CCM-R BMW M3 Kit Details: Brembo GT-R CCM-R Systems Caliper Body: Billet Aluminum Monoblock, Radial Mount Caliper Color: Nickel Plated Number of Pistons: 6 Disc Size and Construction: 380mm x 34mm CCM-R Disc Type: Drilled Disc Vane Design: Vented Straight Vane Disc Material: Carbon Ceramic Matrix-Race (CCM-R) / Pre-Bedded Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: FRONT Goodridge stainless steel brake lines

Brembo Rear 360mm x 28mm CCM-R Rotors & Four-Piston GT-R Calipers For: BMW M3 Sedan (E90) BMW M3 Coupe (E92) BMW M3 Convertible (E93) The Most Sophisticated High Performance Braking System Ever Manufactured for Your BMW M3 This is a lightweight carbon ceramic 2-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System performance combines superior wear (5x longer than iron), increased thermal capacity, and the extremely lightweight characteristics of CCM-R for an extremely versatile and durable system on or off the track. Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everday driving and demanding track-day sessions. The heart of the kit consists of monoblock aluminium calipers, machined from a single billet of cast aluminium to ensure outstanding rigidity and minimized deformation under heavy braking. The 2-piece floating rotors supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled finishes are designed and executed with meticulous precision. These holes in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for the M3 (E90, E92, E93), TUV/DOT homologated metal-braided hoses, plus an adapter and high-quality fastener hardware complete the kit. Racing-Derived Monoblock Calipers in Billet Aluminum Lightweight, rigid and resistant to high temperatures, Brembo's GT-R calipers are made from billet aluminium with a radial 4-piston arrangement. They reduce unsprung weight, improving suspension dynamics and vehicle performance. These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum. Brembo GT-R calipers are nickel plated to guarantee protection against corrosion, providing longveity and high quality in the field. The Brembo logo is CNC machined in red embossing. Two-Piece CCM-R Rotors Reduce Weight and Dissipate Heat GT-R braking systems include 2-piece floating discs which reduce unsprung weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 360mm in diameter and 28mm thick. Pads Provide Optimum Performance in Various Conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. These offer optimum performance in various driving conditions, both on and off the race track. The GT-R kit includes all the necessary hardware such as billet brackets and installation adaptors, as well as stainless steel Goodridge brake lines, to guarantee a seamless installation. Brembo Rear 360x28 CCM-R Four Piston Kit for BMW M3 Details: Brembo GT-R CCM-R Systems Caliper Body: Billet Aluminum Monoblock, Radial Mount Caliper Color: Nickel Plated Number of Pistons: 4 Disc Size and Construction: 360mm x 28mm CCM-R Disc Type: Drilled Disc Vane Design: Vented Straight Vane Disc Material: Carbon Ceramic Matrix-Race (CCM-R) / Pre-Bedded Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge stainless steel brake lines

Brembo 380mm x 34mm CCM-R Rotors & Six-Piston GT-M Calipers This Brembo Kit Fits the Following Cars (Front): BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 The Most Sophisticated High Performance Braking System Ever Manufactured for Your Car This is a lightweight carbon ceramic two-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System performance combines superior wear (5x longer than iron), increased thermal capacity, and the extremely lightweight characteristics of CCM-R for an extremely versatile and durable system on or off the track. Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. Solutions and Technologies Born on the Race Track Braking systems consist of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium monobloc calipers with opposed pistons, combined with cross-drilled Carbon Ceramic Matrix-Race (CCM-R) oversized discs. These premium discs feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Two-Piece CCM-R Rotors Reduce Weight and Dissipate Heat This GT CCM-R braking system's two-piece floating discs reduce unsprung weight and dissipate braking heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 380mm in diameter and 34mm thick. More Braking Torque and Thermal Capacity on the Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, Unique Looks With a combination of painted calipers (available in red, black, yellow, or silver) flaunting the Brembo logo, and cross-drilled CCM-R discs, this Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. KIT DETAILS: Brembo GT CCM-R Systems Caliper Body: Monoblock Aluminum, Radial Mount Caliper Colors: Black, Red, Yellow, Silver Number of Pistons: 6 Disc Size and Construction: 380mm x 34mm CCM-R Disc Type: Drilled Disc Vane Design: Vented Straight Vane Disc Material: Carbon Ceramic Matrix-Race (CCM-R) / Pre-Bedded Disc to Hat Mounting: Floating H-Bobbin with Anti-Rattle Spring Front or Rear System: FRONT Goodridge Stainless Steel Brake Lines Brembo High-Performance Brake Pads

Brembo 360x28 CCM-R Rear Rotors & Four-Piston GT-M Calipers BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 The Most Sophisticated High Performance Braking System Ever Manufactured for Your Car This is a lightweight carbon ceramic two-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System performance combines superior wear (5x longer than iron), increased thermal capacity, and the extremely lightweight characteristics of CCM-R for an extremely versatile and durable system on or off the track. Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. Solutions and Technologies Born on the Race Track Braking systems consist of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminum monoblock calipers with opposed pistons, combined with cross-drilled Carbon Ceramic Matrix-Race (CCM-R) oversized discs. These premium discs feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Two-Piece CCM-R Rotors Reduce Weight and Dissipate Heat This GT CCM-R braking system's two-piece floating discs reduce unsprung weight and dissipate braking heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 360mm in diameter and 28mm thick. More Braking Torque and Thermal Capacity on the Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminum alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Brembo Design With a combination of painted calipers (available in red, black, yellow, or silver) flaunting the Brembo logo, and cross-drilled CCM-R discs, this Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. KIT DETAILS: Brembo GT CCM-R Systems Caliper Body: Monoblock Aluminum, Radial Mount Caliper Colors: Black, Red, Yellow, Silver Number of Pistons: 4 Disc Size and Construction: 360mm x 28mm CCM-R Disc Type: Drilled Disc Vane Design: Vented Straight Vane Disc Material: Carbon Ceramic Matrix-Race (CCM-R) / Pre-Bedded Disc to Hat Mounting: Floating H-Bobbin with Anti-Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel Brake Lines Brembo High-Performance Brake Pads

​The most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.    Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing.         Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick.     Pads provide optimum performance in various driving conditions   The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

​The most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.    Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing.         Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick.     Pads provide optimum performance in various driving conditions   The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

​The most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.    Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing.         Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick.     Pads provide optimum performance in various driving conditions   The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

​The most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.    Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing.         Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick.     Pads provide optimum performance in various driving conditions   The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

Brembo 380x28 Rear Iron Rotors and Four-Piston Calipers For: BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminum monoblock calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminum monobloc (one-piece) calipers with opposed pistons combined with cross-drilled or slotted two-piece floating oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminum calipers. These are monobloc parts machined from a single billet of cast aluminum, ensuring outstanding rigidity and minimized deformation. The discs supplied in the kit, which are floating two-piece design, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminum alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Looks With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. Brembo 380x28 Four Piston Brake Kit Details: Brembo GT-M Systems Caliper Body: Monoblock Radial Mount Caliper Colors: Black, Red, Silver, or Yellow Number of Pistons: 4 Disc Size and Construction: 380mm x 28mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

Brembo 345x28 Two-Piece Rear Rotors and Four-Piston Calipers For: BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminum monobloc calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminum monoblock (one-piece) calipers with opposed pistons combined with cross-drilled or slotted two-piece floating oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminum calipers. These are monobloc parts machined from a single billet of cast aluminum, ensuring outstanding rigidity and minimized deformation. The discs supplied in the kit, which are floating two-piece design, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit.  More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminum alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching Colors and Unique Brembo Design With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. Brembo BMW M3 345x28 Rotor and Caliper Kit Details: Brembo GT-M Systems Caliper Body: Monoblock Radial Mount Caliper Colors: Black, Red, Silver, or Yellow Number of Pistons: 4 Disc Size and Construction: 345mm x 28mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

Girodisc A1-157 BMW Front Rotors The Girodisc Front Rotor set for the BMW E9X M3 provides a precision-engineered, lightweight upgrade that enhances braking performance and thermal management without the need for any modifications. Designed as a direct OEM replacement, these two-piece rotors retain full compatibility with the factory calipers and ABS system while reducing rotating and unsprung mass for sharper handling and acceleration. Vehicle Fitment This Girodisc front rotor set fits the following BMW models: BMW M3 E90 Sedan (2008–2011) BMW M3 E92 Coupe (2008–2013) BMW M3 E93 Convertible (2008–2013) Direct bolt-on installation using the OEM calipers and hardware. No spacers, brackets, or modifications required. Performance and Design Each rotor weighs significantly less than the factory single-piece iron discs, resulting in reduced rotational inertia and improved suspension response. The 48 curved directional vanes inside the rotor act as a centrifugal pump, pulling air through the disc to increase cooling efficiency and reduce fade during repeated high-performance braking. The central hat is CNC-machined from U.S.-sourced 6061-T6 aluminum for strength and low weight, while the friction ring is Girodisc’s proprietary cast iron, poured and machined entirely in the USA. Features - Direct OEM replacement; bolts on with no modifications required. - Two-piece floating rotor design reduces unsprung and rotating mass. - Proprietary cast iron rotor ring with 6061-T6 aluminum hat for optimal strength and heat management. - 48 curved directional vanes improve cooling and minimize fade during aggressive driving or track use. - Floating mount system with ten high-strength alloy steel drive pins allows for precise axial and radial float. - Anti-noise spring washers eliminate rattle during street driving while maintaining full float when hot. - Cadmium-plated hardware and class 12.9 cap screws for corrosion resistance and durability. - Fully designed, cast, and machined in the USA to Girodisc motorsport-grade tolerances. Specifications Rotor Type: Two-piece floatingVane Count: 48 curved directionalMaterial: Proprietary cast iron with 6061-T6 aluminum hatHardware: 10 alloy steel drive pins with anti-noise spring washersFitment: BMW E90, E92, E93 M3 (2008–2013)Installation: Direct bolt-onSold as: Pair (left and right front rotors) FAQs: BMW E9X M3 Front Rotors (Girodisc) Do these rotors fit with the OEM calipers? Yes. They are designed as a direct replacement and work perfectly with the factory calipers and pads. What benefits do these offer over stock rotors? Reduced unsprung mass, faster suspension response, improved cooling, and more consistent braking under heavy use. Are these noisy during normal street use? No. The use of anti-noise spring washers eliminates rattle while maintaining full floating capability under heat. Can the rotors be rebuilt? Yes. Once the iron friction rings wear out, they can be replaced independently, allowing reuse of the aluminum hats and hardware. Ordering Information Sold and priced per pair. Includes left and right Girodisc front rotors for the BMW E9X M3.

Pagid Racing Brake Pad Shape No. 8053 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW 1 Series M Coupe [E82] 11 - 13 X BMW 320i - 330i [E90] 05 - 11 X BMW 335i . 335d [E90/E91/E92] 06 - 11 X BMW M3 [E90 / E92] 07 - 13 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound: The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape No. 8021 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW 1 Series M Coupe [E82] 2011 - 13 X BMW M3 [E90 / E92] 2007 - 13 X BMW M5 [E60] 2004 - 11 X BMW M6 [E63 / E64] 2006 - 12 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Performance Friction PFC Brake Pads 0918.XX.19.44 Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 0918.XX.19.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 0918.XX.19.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 0918.XX.19.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. Fits the Following Cars (Front Axle): Make Model Year Notes BMW 323i 2010 - 2011 Front BMW 328i 2007 - 2013 Front BMW 328i xDrive 2009 - 2013 Front BMW 328xi 2007 - 2008 Front BMW 335d 2009 - 2011 Front BMW 335i 2007 - 2013 Front BMW 335i xDrive 2009 - 2013 Front BMW 335is 2011 - 2013 Front BMW 335xi 2007 - 2008 Front BMW 525i 2004 - 2006 Front BMW 528i 2008 - 2010 Front BMW 528i xDrive 2009 - 2010 Front BMW 528xi 2008 - 2010 Front BMW 530i 2004 - 2007 Front BMW 530xi 2006 - 2007 Front BMW 535i 2008 - 2010 Front BMW 535i xDrive 2009 - 2010 Front BMW 535xi 2008 - 2010 Front BMW 545i 2004 - 2005 Front BMW 550i 2006 - 2010 Front BMW 645Ci 2004 - 2005 Front BMW 650i 2006 - 2010 Front BMW 745i 2002 - 2005 Front BMW 745Li 2002 - 2005 Front BMW 750i 2006 - 2008 Front BMW 750Li 2006 - 2008 Front BMW 760i 2004 - 2006 Front BMW 760Li 2006 - 2008 Front BMW M3 2008 - 2013 Front BMW X1 sDrive20i; xDrive28i 2012 - 2014 Front BMW X1 sDrive28i; xDrive28i; xDrive35i 2013 - 2015 Front BMW Z4 sDrive35is 2011 - 2013 Front

Performance Friction PFC Brake Pads 0919.XX.16.44 Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 0919.XX.16.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 0919.XX.16.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 0919.XX.16.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. Fits the Following Cars (Rear Axle): BMW 1M 2007-13 E82 Coupé BMW 1M 2007-13 E82 E82-1M BMW 6 Series 2004- E63 635 / E64 630,645,650 BMW 7 Series 2002- E65 / E66 BMW M3 2008-13 E90 / E92 / E93 BMW M3 2008-13 E92 E92-M3 BMW M5 / 535d 2006-10 E60