AP_racing_372mm_Front_Brake_Kit_Sale_Image
AP Racing Radi-CAL 390mm Competition Brake Kit Porsche (Front) from $10,689.00
AP Racing Radi-Cal 390mm Competition Brake Kit for Porsche (Front) Fit The Following Cars Porsche 991 Carrera S/4S/GTS (PCCB and Iron Rotors) Porsche 992 Carrera base and Carrera 4 (Iron Rotors) Complete front AP Racing Radi-Cal Competition Brake Kit for Porsche 991 911 S/4S/GTS and 992 Carrera base and Carrera 4. Features AP Racing Radi-Cal 9669 calipers with option for 25mm (1 inch) thick pads for extreme durability! Jewel-like ENP Caliper finish is incredibly durable and easy to clean 390x36mm iron discs are resilient under heavy track use, and replacements cost one tenth of PCCB ($600 vs. $6,000 per disc) Shaves over 20 lbs. off the front axle vs oem iron brakes Only adds approximately one pound per side of unsprung weight vs. the OEM PCCB setup Fits inside 19" wheels, which the OEM PCCB discs cannot do, allowing for additional unsprung weight reduction plus improved tire options Our AP Racing Radi-Cals feature a removable bridge, making pad swaps far faster and easier than stock calipers Commonly available AP Racing pad shapes provide a wide selection of brake pad choices to tailor system feel and performance Removing the stock calipers and PCCB discs allows them to be preserved undamaged, retaining the vehicle's future resale value AP systems typically trade hands on the used market at 65% or more of their original MSRP, lowering the long-term cost of ownership. Use them for a few years and recoup a large portion of your initial investment. Designed to work with our matching 365mm Radi-Cal brake kit.
AP_racing_372mm_Front_Brake_Kit_Sale_Image
AP Racing Radi-CAL 372mm Competition Brake Kit Porsche (Front) from $8,071.00
AP Racing Radi-Cal 372mm Competition Brake Kit for Porsche (Front) Fit The Following Cars Porsche 991 Carrera S/4S/GTS (PCCB and Iron Rotors) Porsche 992 Carrera base / Carrera 4 (Iron Rotors) Complete front AP Racing Radi-Cal Competition Brake Kit for Porsche features; Features AP Racing Radi-Cal 9669 calipers with option for 25mm (1 inch) thick pads for extreme durability! Jewel-like ENP Caliper finish is incredibly durable and easy to clean 372x34mm iron discs are resilient under heavy track use, and replacements cost one tenth of PCCB ($600 vs. $6,000 per disc) Shaves over 20 lbs. off the front axle vs oem iron brakes Only adds approximately one pound per side of unsprung weight vs. the OEM PCCB setup Fits inside 19" wheels, which the OEM PCCB discs cannot do, allowing for additional unsprung weight reduction plus improved tire options Our AP Racing Radi-Cals feature a removable bridge, making pad swaps far faster and easier than stock calipers Commonly available AP Racing pad shapes provide a wide selection of brake pad choices to tailor system feel and performance Removing the stock calipers and PCCB discs allows them to be preserved undamaged, retaining the vehicle's future resale value AP systems typically trade hands on the used market at 65% or more of their original MSRP, lowering the long-term cost of ownership. Use them for a few years and recoup a large portion of your initial investment. Designed to work with our matching 365mm Radi-Cal brake kit.
AP Racing brake system components including red calipers, silver rotors, and hardware on a white background.
AP Racing 380mm Road Brake Kit Porsche (Front) $7,634.00
AP Racing Road 380mm Road Brake Kit for Porsche (Front) Fit The Following Cars Porsche 991 Carrera S/4S/GTS (PCCB and Iron Rotors) Porsche 992 Carrera Base / Carrera 4 (PCCB and Iron Rotors) Complete front AP Racing Road Brake Kit for Porsche 991 and 992 911 features; Features AP Racing Radi-Cal 9562 calipers. Available with Black, Red, or Silver Calipers Takes your brakes into GT3 territory with huge 380x36mm, 72 vane AP Racing J Hook discs Painted calipers with dust boots add durability in inclement weather conditions Low noise, vibration, and harshness for a very OE-like experience during daily driving Leverages six piston AP Racing CP9562 World Radi-CAL II calipers with a red, black, or silver painted finish Utilizes large volume brake pads for heat absorption and longevity Pistons sized properly to maintain proper brake bias and work with the OEM master cylinder and ABS system Designed to mate with OEM rear brakes or our matching rear AP Racing Road Brake Kit
AP_Racing_Radi-Cal_365mm_ENP_Rear_Competition_Brake_Kit_for_Porsche__Rear__ENP_Sale_image
AP Racing Radi-CAL 365mm Competition Brake Kit Porsche (Rear) from $7,489.00
AP Racing Radi-Cal 365mm Competition Brake Kit for Porsche (Rear) Fit The Following Cars Porsche 991 Carrera S/4S/GTS (PCCB and Iron Rotors) Complete front AP Racing Radi-Cal Competition Brake Kit for Porsche 991 911 S/4S/GTS features; Features AP Racing Radi-Cal 9449 calipers  Jewel-like ENP Caliper finish is incredibly durable and easy to clean 365x30mm iron discs are resilient under heavy track use, and replacements cost one tenth of PCCB ($600 vs. $6,000 per disc) Shaves up to  9lbs. off the rear axle vs oem iron brakes Only adds approximately one pound per side of unsprung weight vs. the OEM PCCB setup Fits inside 19" wheels, which the OEM PCCB discs cannot do, allowing for additional unsprung weight reduction plus improved tire options Our AP Racing Radi-Cals feature a removable bridge, making pad swaps far faster and easier than stock calipers Commonly available AP Racing pad shapes provide a wide selection of brake pad choices to tailor system feel and performance Removing the stock calipers and PCCB discs allows them to be preserved undamaged, retaining the vehicle's future resale value AP systems typically trade hands on the used market at 65% or more of their original MSRP, lowering the long-term cost of ownership. Use them for a few years and recoup a large portion of your initial investment. Designed to work with our matching Front Radi-Cal brake kit.
AP_Racing_Road_Brake_Kit_Rear_9541_380mm_Porsche_Main_Image
AP Racing 380mm Road Brake Kit Porsche (Rear) $7,344.00
AP Racing Road 380mm Road Brake Kit for Porsche (Rear) Fit The Following Cars Porsche 991 Carrera S/4S/GTS (PCCB and Iron Rotors) Porsche 992 Carrera / Carrera 4 (PCCB and Iron Rotors) Complete front AP Racing Road Brake Kit for Porsche 991 and 992 911 features; Takes your brakes into GT3 territory with huge 380x28mm, 48 vane AP Racing J Hook discs Retains full function of OEM parking brake Painted calipers with dust boots add durability in inclement weather conditions Low noise, vibration, and harshness for a very OE-like experience during daily driving Leverages four piston AP Racing CP9541 World Radi-CAL II calipers with a red, black, or silver painted finish Pistons sized properly to maintain proper brake bias and work with the OEM master cylinder and ABS system Designed to mate with the front AP Racing Road Brake kit Weighs roughly the same as an OEM rear rear brake setup despite a huge size increase of the rotor size to 380mm
brembo-2-piece-disc-350mm-slotted-type-3-Image
Brembo 2-Piece Slotted Rotors Porsche 991.1 Carrera S/4S/GTS (Rear) $3,629.00
Brembo 2-Piece Slotted Rotors Porsche 991.1 Carrera S/4S/GTS (Rear) 350x28mm (13.8") 2-Piece disc complete axle set.  Pre-Assembled with all necessary hardware Included Track-Ready Performance, Street-Driven Reliability Upgrade your braking system with the Brembo Type 3 2-Piece Floating Rotors, precision-engineered for the Porsche 991.1 Carrera S, Carrera 4S, and GTS models equipped with standard iron brakes (non-PCCB). Designed for high-performance street driving, autocross, and track-day use, these rotors deliver enhanced thermal management, reduced unsprung weight, and longer pad life. Each rotor features a lightweight billet aluminum hat mated to a directionally slotted, heat-treated iron outer ring, optimizing brake cooling and rotor stability under extreme conditions. The floating design reduces stress transfer to the hub, helping to minimize cracking, coning, and distortion during repeated high-speed stops. With OE-matched dimensions, these rotors offer direct bolt-on fitment with no modifications required. Whether you're shaving seconds on the track or just want more confidence on the road, the Brembo 2-piece rotor set is the perfect upgrade to unleash the full potential of your 991.1 Carrera S, 4S, or GTS. Backed by competition-proven engineering and trusted by performance enthusiasts nationwide, this is the brake rotor solution serious drivers choose. Fits: 2012-2016 Porsche 991 Carrera S / 4S / GTS (excludes 991.2 and PCCB models) Lightweight 2-piece floating design with aluminum center hat Slotted surface for enhanced cooling and pad bite Reduces unsprung mass and improves rotor longevity Direct OEM replacement — no modification needed Track-tested for performance and durability Competition Motorsport is an Authorized dealer for Brembo products and we are one of the largest stocking dealers in the country.   The Brembo two piece rotor system is a direct rotor disc replacement for the oem hat and rotor  and is designed to be used with oem calipers with no modifications necessary.  The 2-piece Brembo design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Brembo 2-Piece Rotor FAQs How long do Brembo discs last? The usable life of a brake disc is influenced by a number of factors including vehicle weight, driving style, vehicle usage, brake pad material, and many others. Therefore a blanket disc lifetime cannot be given. However, when used in the same conditions, a Brembo disc should meet or exceed the life of the disc it replaces. It is important to periodically check the disc thickness, and replace the disc if it falls below the minimum allowed thickness. How does reducing weight of the braking system benefit the vehicle? The mass of any vehicle requires energy to accelerate or decelerate. Reducing vehicle mass improves acceleration and requires less energy to be dissipated during deceleration. Rotating mass requires additional energy in order to increase or decrease its speed of rotation. Therefore, decreasing the mass of the caliper is valuable due to its contribution to total vehicle mass. Decreasing the mass of the disc has an even greater benefit due to the fact that the disc must rotate as well. Additionally, the mass of the brake system is also unsprung mass. Reducing the unsprung mass has the additional benefit of improved suspension performance, resulting in enhanced ride and handling. Should new discs and pads be bedded in? The bedding procedure is an important step when installing new rotors and pads. Correctly bedded pads form a transfer layer of material on the surface of the disc which improves overall "bite" and performance. Without proper "pre-bedding" that simulates the correct heat and torque loads seen in actual driving conditions, a pad's true potential cannot be realized. This process will also ensure that the pads will produce a rotor finish with a consistent transfer layer which prevents "judder" from occurring. The Brembo Bedding Memo should be followed when installing a new Brembo system or new discs and / or street pads. For race friction and / or track use, please contact us for detailed information regarding the appropriate bedding procedure to follow. Some of the bushings in the two-piece disc assembly seem to be loose. The two-piece disc assemblies utilize a floating disc. The mounting system of the disc is designed to allow a specific amount of float in both the radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use, while still maintaining the benefits of a floating disc. These springs can be seen when looking at the backside of the disc. The small screws on the backside of the disc are properly torqued during assembly and utilize thread lock compound to prevent loosening. They must not be tightened further. What is the difference between the systems Brembo offers? Brembo offers different levels for different applications, and for different budgets. There are currently three performance levels within the Brembo program. The first level is the Sport system. These kits include cross-drilled or slotted discs and high performance brake pads, and are direct replacements for the OEM components. The second level, the Gran Turismo system, upgrades the entire corner brake assembly. These kits combine fixed mount, 4, 6, or 8-piston aluminum calipers equipped with high performance brake pads, one or two piece directionally vented discs, and steel-braided brake lines. For those seeking a system for exclusive or nearly exclusive track use, the Race systems offer upgrades consisting of true racing components. Why are there so many holes in a cross-drilled disc? The number of holes in a cross-drilled disc is part of the engineered system. Brembo has done extensive testing with regards to the number of holes, their size, their location and their chamfering. This attention to detail is what truly sets Brembo apart in the world of braking. The same attention to detail that is delivered to the Ferrari Formula One effort is a component of the high performance program. The number of holes in a disc is in part a function of the size of the disc and the internal venting (if it is a vented disc). Why use a two-piece "floating" disc assembly? There are several reasons that a two-piece floating disc assembly is of benefit. First, by using an aluminum bell for the hub section of the disc saves a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. In a two-piece floating disc assembly, the iron disc heats up uniformly, and the controlled float which is present allows for the differential expansion of the very hot brake disc, and the relatively cool aluminum bell. This allows the disc to be used under severe conditions without having a detrimental effect. Will a Brembo brake system work with my standard master cylinder, ABS, or traction control? Brembo brake systems are designed to work with your standard master cylinder, and do not hamper the function of your ABS or traction control system. Will I experience brake noise with Brembo brakes? Brembo makes every effort to test for and eliminate abnormal brake noise from the systems we offer. There are many factors that can contribute to abnormal brake noises, and while it is unlikely that a Brembo system will create noise, the engineering and customer service departments are available to answer questions and work to solve any noise issues which may arise. Please contact us if you have additional questions or concerns. How do I properly bed my new Brembo brake rotors? It is important to follow the proper brake bedding procedure following installation. This is necessary not only for optimum performance of the system, but also to avoid onset of judder (vibration felt through brake and steering).   The discs are delivered with a thin zinc coating to prevent corrosion. Prior to beginning the bedding procedure, this plating must be removed from the braking surfaces by driving the car slowly (under 30mph) and performing very light brake applications in order to remove the plating without generating heat. With too much heat or pedal pressure, this plating can be deposited unevenly on the disc, and impregnated into the pad, further increasing the likelihood of judder development. Once a visual inspection of the braking surfaces confirms that the plating has been evenly removed, begin with the bedding procedure as specified below. Drive vehicle to a remote area and perform at least 30 brake applications of 3 second duration. Use light/medium deceleration with varying starting speeds. Leave at least ½ mile between each brake application The purpose of this procedure is to gradually increase the temperature in the components without thermal shock, and to mate the brake pad and disc friction surfaces  After the repeated stops, drive the vehicle for several miles with little or no braking in order to adequately cool the components  The system is now ready for normal use  This entire procedure must be complete before driving the vehicle as normal. It is especially important that this process is completed before any extended same-speed driving is done (i.e. freeway travel). Failure to follow these instructions greatly increases the likelihood of judder development
Brembo UPGRADE 2-Piece Rear Brake Disc Set – 350 × 28 mm
Brembo UPGRADE 2-Piece Rear Brake Disc Set – 350 × 28 mm $3,338.00
Brembo UPGRADE 2-Piece Rear Brake Disc Set – 350 × 28 mm Brembo two-piece rear brake disc assemblies for selected Porsche brake-system configurations. This set features a 350 mm diameter and 28 mm thickness. This version uses the TY3 disc-face pattern. Verify the exact vehicle and original brake equipment before ordering. Features & Specifications Position: Rear axle Disc size: 350 × 28 mm Construction: Two-piece disc assembly Disc material: Advanced High Carbon Alloy / Corrosion Resistant Plating Disc mounting: Floating D-Bobbin with Anti Rattle Spring Disc-face options: TY3 Available Rotor Types TY3: Brembo part 203.8009A (Slotted Type-3) Manufacturer Notes This system includes oversized 2-Piece disc assemblies, brackets, and hardware. To be used with the OEM calipers. Manufacturer-Listed Porsche Applications Important: The following applications are transcribed from the October 8, 2026 Race Technologies workbook and have not been independently verified. Model listings can include different factory disc dimensions, PCCB-to-iron conversion requirements, and caliper configurations. Matching diameter and thickness alone does not establish fitment. Confirm the Brembo part number, vehicle brake equipment, and hardware requirements before ordering. Make / Model Submodel Notes Model Years Porsche 911 / 991.1 C2S, 991.1 C4S, 991.1 GTS Without PCCB 2012–2016 Porsche 911 / 991.2 C2S, 991.2 C4S, 991.2 GTS Without PCCB 2017–2019 Ordering & Installation Confirm the correct axle, original brake configuration, and Brembo part number before purchase. Additional compatible pads or hardware may be required for certain applications; refer to the manufacturer notes above. Contact Competition Motorsport for application verification.
Brembo_2-Piece_Type_3_Rotor_image
Brembo 2-Piece Slotted Rotors Porsche 991 Carrera S/4S/GTS (Front) from $3,047.00
Brembo 2-Piece Slotted Rotors Porsche 991 Carrera S/4S/GTS (Front) 350x34mm (13.8") 2-Piece disc complete axle set.  Pre-Assembled with all necessary hardware Included Track-Ready Performance, Street-Driven Reliability Upgrade your braking system with the Brembo Type 3 2-Piece Floating Rotors, precision-engineered for the Porsche 991 Carrera S, Carrera 4S, and GTS models equipped with standard iron brakes (non-PCCB). Designed for high-performance street driving, autocross, and track-day use, these rotors deliver enhanced thermal management, reduced unsprung weight, and longer pad life. Each rotor features a lightweight billet aluminum hat mated to a directionally slotted, heat-treated iron outer ring, optimizing brake cooling and rotor stability under extreme conditions. The floating design reduces stress transfer to the hub, helping to minimize cracking, coning, and distortion during repeated high-speed stops. With OE-matched dimensions, these rotors offer direct bolt-on fitment with no modifications required. Whether you're shaving seconds on the track or just want more confidence on the road, the Brembo 2-piece rotor set is the perfect upgrade to unleash the full potential of your 991 Carrera S, 4S, or GTS. Backed by competition-proven engineering and trusted by performance enthusiasts nationwide, this is the brake rotor solution serious drivers choose. Fits: 2012-2019 Porsche 991 Carrera S / 4S / GTS (excludes PCCB models) Lightweight 2-piece floating design with aluminum center hat Slotted surface for enhanced cooling and pad bite Reduces unsprung mass and improves rotor longevity Direct OEM replacement — no modification needed Track-tested for performance and durability Competition Motorsport is an Authorized dealer for Brembo products and we are one of the largest stocking dealers in the country.   The Brembo two piece rotor system is a direct rotor disc replacement for the oem hat and rotor  and is designed to be used with oem calipers with no modifications necessary. The 2-piece Brembo design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Brembo 2-Piece Rotor FAQs How long do Brembo discs last? The usable life of a brake disc is influenced by a number of factors including vehicle weight, driving style, vehicle usage, brake pad material, and many others. Therefore a blanket disc lifetime cannot be given. However, when used in the same conditions, a Brembo disc should meet or exceed the life of the disc it replaces. It is important to periodically check the disc thickness, and replace the disc if it falls below the minimum allowed thickness. How does reducing weight of the braking system benefit the vehicle? The mass of any vehicle requires energy to accelerate or decelerate. Reducing vehicle mass improves acceleration and requires less energy to be dissipated during deceleration. Rotating mass requires additional energy in order to increase or decrease its speed of rotation. Therefore, decreasing the mass of the caliper is valuable due to its contribution to total vehicle mass. Decreasing the mass of the disc has an even greater benefit due to the fact that the disc must rotate as well. Additionally, the mass of the brake system is also unsprung mass. Reducing the unsprung mass has the additional benefit of improved suspension performance, resulting in enhanced ride and handling. Should new discs and pads be bedded in? The bedding procedure is an important step when installing new rotors and pads. Correctly bedded pads form a transfer layer of material on the surface of the disc which improves overall "bite" and performance. Without proper "pre-bedding" that simulates the correct heat and torque loads seen in actual driving conditions, a pad's true potential cannot be realized. This process will also ensure that the pads will produce a rotor finish with a consistent transfer layer which prevents "judder" from occurring. The Brembo Bedding Memo should be followed when installing a new Brembo system or new discs and / or street pads. For race friction and / or track use, please contact us for detailed information regarding the appropriate bedding procedure to follow. Some of the bushings in the two-piece disc assembly seem to be loose. The two-piece disc assemblies utilize a floating disc. The mounting system of the disc is designed to allow a specific amount of float in both the radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use, while still maintaining the benefits of a floating disc. These springs can be seen when looking at the backside of the disc. The small screws on the backside of the disc are properly torqued during assembly and utilize thread lock compound to prevent loosening. They must not be tightened further. What is the difference between the systems Brembo offers? Brembo offers different levels for different applications, and for different budgets. There are currently three performance levels within the Brembo program. The first level is the Sport system. These kits include cross-drilled or slotted discs and high performance brake pads, and are direct replacements for the OEM components. The second level, the Gran Turismo system, upgrades the entire corner brake assembly. These kits combine fixed mount, 4, 6, or 8-piston aluminum calipers equipped with high performance brake pads, one or two piece directionally vented discs, and steel-braided brake lines. For those seeking a system for exclusive or nearly exclusive track use, the Race systems offer upgrades consisting of true racing components. Why are there so many holes in a cross-drilled disc? The number of holes in a cross-drilled disc is part of the engineered system. Brembo has done extensive testing with regards to the number of holes, their size, their location and their chamfering. This attention to detail is what truly sets Brembo apart in the world of braking. The same attention to detail that is delivered to the Ferrari Formula One effort is a component of the high performance program. The number of holes in a disc is in part a function of the size of the disc and the internal venting (if it is a vented disc). Why use a two-piece "floating" disc assembly? There are several reasons that a two-piece floating disc assembly is of benefit. First, by using an aluminum bell for the hub section of the disc saves a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. In a two-piece floating disc assembly, the iron disc heats up uniformly, and the controlled float which is present allows for the differential expansion of the very hot brake disc, and the relatively cool aluminum bell. This allows the disc to be used under severe conditions without having a detrimental effect. Will a Brembo brake system work with my standard master cylinder, ABS, or traction control? Brembo brake systems are designed to work with your standard master cylinder, and do not hamper the function of your ABS or traction control system. Will I experience brake noise with Brembo brakes? Brembo makes every effort to test for and eliminate abnormal brake noise from the systems we offer. There are many factors that can contribute to abnormal brake noises, and while it is unlikely that a Brembo system will create noise, the engineering and customer service departments are available to answer questions and work to solve any noise issues which may arise. Please contact us if you have additional questions or concerns. How do I properly bed my new Brembo brake rotors? It is important to follow the proper brake bedding procedure following installation. This is necessary not only for optimum performance of the system, but also to avoid onset of judder (vibration felt through brake and steering).   The discs are delivered with a thin zinc coating to prevent corrosion. Prior to beginning the bedding procedure, this plating must be removed from the braking surfaces by driving the car slowly (under 30mph) and performing very light brake applications in order to remove the plating without generating heat. With too much heat or pedal pressure, this plating can be deposited unevenly on the disc, and impregnated into the pad, further increasing the likelihood of judder development. Once a visual inspection of the braking surfaces confirms that the plating has been evenly removed, begin with the bedding procedure as specified below. Drive vehicle to a remote area and perform at least 30 brake applications of 3 second duration. Use light/medium deceleration with varying starting speeds. Leave at least ½ mile between each brake application The purpose of this procedure is to gradually increase the temperature in the components without thermal shock, and to mate the brake pad and disc friction surfaces  After the repeated stops, drive the vehicle for several miles with little or no braking in order to adequately cool the components  The system is now ready for normal use  This entire procedure must be complete before driving the vehicle as normal. It is especially important that this process is completed before any extended same-speed driving is done (i.e. freeway travel). Failure to follow these instructions greatly increases the likelihood of judder development
Brembo UPGRADE 2-Piece Front Brake Disc Set – 410 × 36 mm
Brembo UPGRADE 2-Piece Front Brake Disc Set – 410 × 36 mm $2,902.00
Brembo UPGRADE 2-Piece Front Brake Disc Set – 410 × 36 mm Brembo two-piece front brake disc assemblies for selected Porsche brake-system configurations. This set features a 410 mm diameter and 36 mm thickness. This version uses the TY3L disc-face pattern. Verify the exact vehicle and original brake equipment before ordering. Features & Specifications Position: Front axle Disc size: 410 × 36 mm Construction: Two-piece disc assembly Disc material: Advanced High Carbon Alloy / Corrosion Resistant Plating Disc mounting: Floating H-Bobbin with Anti Rattle Spring Disc-face options: TY3L Available Rotor Types TY3L: Brembo part 10D.9508A (Slotted Type-3L) Manufacturer Notes Requires P1122.18 brake pads. Manufacturer-Listed Porsche Applications Important: The following applications are transcribed from the October 8, 2026 Race Technologies workbook and have not been independently verified. Model listings can include different factory disc dimensions, PCCB-to-iron conversion requirements, and caliper configurations. Matching diameter and thickness alone does not establish fitment. Confirm the Brembo part number, vehicle brake equipment, and hardware requirements before ordering. Make / Model Submodel Notes Model Years Porsche 981 Cayman GT4 PCCB equipped 2016 Porsche 982 718 Cayman GT4 PCCB equipped 2020–2023 Porsche 911 / 991 Turbo PCCB equipped 2014–2019 Porsche 911 / 991 Turbo S PCCB equipped 2014–2019 Porsche 911 / 991.2 C2, 991.2 C4, 991.2 Carrera T PCCB equipped 2017–2019 Porsche 911 / 991.2 C2S, 991.2 C4S, 991.2 GTS PCCB equipped 2017–2019 Porsche 911 / 992.1 C2, 992.1 C4, 992.1 Carrera T PCCB equipped 2020–2024 Porsche 911 / 992.1 C2S, 992.1 C4S PCCB equipped 2020–2024 Porsche 911 / 992.1 GTS Without PCCB 2020–2024 Porsche 911 / 992.1 GTS PCCB equipped 2020–2024 Porsche 911 / 992.2 C2, 992.2 C4, 992.2 Carrera T PCCB equipped 2025+ Ordering & Installation Confirm the correct axle, original brake configuration, and Brembo part number before purchase. Additional compatible pads or hardware may be required for certain applications; refer to the manufacturer notes above. Contact Competition Motorsport for application verification.
Brembo UPGRADE 2-Piece Rear Brake Disc Set – 390 × 32 mm
Brembo UPGRADE 2-Piece Rear Brake Disc Set – 390 × 32 mm $2,902.00
Brembo UPGRADE 2-Piece Rear Brake Disc Set – 390 × 32 mm Brembo two-piece rear brake disc assemblies for selected Porsche brake-system configurations. This set features a 390 mm diameter and 32 mm thickness. This version uses the TY3L disc-face pattern. Verify the exact vehicle and original brake equipment before ordering. Features & Specifications Position: Rear axle Disc size: 390 × 32 mm Construction: Two-piece disc assembly Disc material: Advanced High Carbon Alloy / Corrosion Resistant Plating Disc mounting: Floating H-Bobbin with Anti Rattle Spring Disc-face options: TY3L Available Rotor Types TY3L: Brembo part 20D.9012A (Slotted Type-3L) Manufacturer-Listed Porsche Applications Important: The following applications are transcribed from the October 8, 2026 Race Technologies workbook and have not been independently verified. Model listings can include different factory disc dimensions, PCCB-to-iron conversion requirements, and caliper configurations. Matching diameter and thickness alone does not establish fitment. Confirm the Brembo part number, vehicle brake equipment, and hardware requirements before ordering. Make / Model Submodel Notes Model Years Porsche 981 Cayman GT4 PCCB equipped 2016 Porsche 982 718 Cayman GT4 PCCB equipped 2020–2023 Porsche 911 / 991 Turbo PCCB equipped 2014–2019 Porsche 911 / 991 Turbo S PCCB equipped 2014–2019 Porsche 911 / 991.2 C2, 991.2 C4, 991.2 Carrera T PCCB equipped 2017–2019 Porsche 911 / 991.2 C2S, 991.2 C4S, 991.2 GTS PCCB equipped 2017–2019 Porsche 911 / 992.1 C2, 992.1 C4, 992.1 Carrera T PCCB equipped 2020–2024 Porsche 911 / 992.1 C2S, 992.1 C4S PCCB equipped 2020–2024 Porsche 911 / 992.1 GTS PCCB equipped 2020–2024 Porsche 911 / 992.2 C2, 992.2 C4, 992.2 Carrera T PCCB equipped 2025+ Ordering & Installation Confirm the correct axle, original brake configuration, and Brembo part number before purchase. Additional compatible pads or hardware may be required for certain applications; refer to the manufacturer notes above. Contact Competition Motorsport for application verification.
Brembo UPGRADE 2-Piece Front Brake Disc Set – 350 × 34 mm
Brembo UPGRADE 2-Piece Front Brake Disc Set – 350 × 34 mm $2,757.00
Brembo UPGRADE 2-Piece Front Brake Disc Set – 350 × 34 mm Brembo two-piece front brake disc assemblies for selected Porsche brake-system configurations. This set features a 350 mm diameter and 34 mm thickness. This version uses the TY3 disc-face pattern. Verify the exact vehicle and original brake equipment before ordering. Features & Specifications Position: Front axle Disc size: 350 × 34 mm Construction: Two-piece disc assembly Disc material: Advanced High Carbon Alloy / Corrosion Resistant Plating Disc mounting: Floating D-Bobbin with Anti Rattle Spring Disc-face options: TY3 Available Rotor Types TY3: Brembo part 103.8006A (Slotted Type-3) Manufacturer Notes Requires P1122.18 brake pads. This system includes oversized 2-Piece disc assemblies to be used with the OEM calipers. Manufacturer-Listed Porsche Applications Important: The following applications are transcribed from the October 8, 2026 Race Technologies workbook and have not been independently verified. Model listings can include different factory disc dimensions, PCCB-to-iron conversion requirements, and caliper configurations. Matching diameter and thickness alone does not establish fitment. Confirm the Brembo part number, vehicle brake equipment, and hardware requirements before ordering. Make / Model Submodel Notes Model Years Porsche 981 Boxster PCCB equipped 2012–2016 Porsche 981 Boxster GTS PCCB equipped 2015–2016 Porsche 981 Boxster S PCCB equipped 2012–2016 Porsche 981 Boxster Spyder Without PCCB 2016 Porsche 981 Boxster Spyder PCCB equipped 2016 Porsche 981 Cayman PCCB equipped 2013–2016 Porsche 981 Cayman GTS PCCB equipped 2015–2016 Porsche 981 Cayman S PCCB equipped 2013–2016 Porsche 982 718 Boxster GTS PCCB equipped 2018–2019 Porsche 982 718 Boxster GTS 4.0 — 2020–2025 Porsche 982 718 Boxster S PCCB equipped 2017–2025 Porsche 982 718 Boxster, Boxster T PCCB equipped 2017–2025 Porsche 982 718 Cayman GTS PCCB equipped 2018–2019 Porsche 982 718 Cayman GTS 4.0 — 2020–2025 Porsche 982 718 Cayman S PCCB equipped 2017–2025 Porsche 982 718 Cayman, Cayman T PCCB equipped 2017–2025 Porsche 987 Boxster S, Spyder PCCB equipped 2005–2011 Porsche 987 Cayman R PCCB equipped 2012 Porsche 987 Cayman S PCCB equipped 2006–2012 Porsche 911 / 991.1 C2S, 991.1 C4S, 991.1 GTS Without PCCB 2012–2016 Porsche 911 / 991.1 C2S, 991.1 C4S, 991.1 GTS PCCB equipped 2012–2016 Porsche 911 / 991.2 C2S, 991.2 C4S, 991.2 GTS Without PCCB 2017–2019 Porsche 911 / 992.1 C2S, 992.1 C4S Without PCCB 2020–2024 Porsche 911 / 992.2 C2, 992.2 C4, 992.2 Carrera T Without PCCB 2025+ Porsche 911 / 996 Turbo PCCB equipped 2002–2005 Porsche 911 / 997 C2S, 997 C2 GTS PCCB equipped 2005–2012 Porsche 911 / 997 C4S, 997 C4 GTS PCCB equipped 2006–2012 Porsche 911 / 997 Turbo Without PCCB 2006–2012 Ordering & Installation Confirm the correct axle, original brake configuration, and Brembo part number before purchase. Additional compatible pads or hardware may be required for certain applications; refer to the manufacturer notes above. Contact Competition Motorsport for application verification.
Brembo UPGRADE TY3 slotted two-piece floating front brake disc set, part 103.8006A
Brembo UPGRADE 2-Piece Front Brake Disc Set for Porsche 991/992/718/981 (350x34mm) $2,757.00
Brembo UPGRADE 2-Piece Front Brake Disc Set for Porsche Take your Porsche braking performance to the next level with Brembo UPGRADE two-piece floating front brake discs. Engineered for demanding performance driving, these 350 × 34 mm TY3 slotted discs replace the factory front brake discs while retaining the original calipers. The two-piece design joins a high-carbon alloy friction ring to a separate mounting hat through Brembo’s floating D-bobbin system. This construction allows radial expansion as temperatures rise, helping reduce thermal stress and the risk of distortion during repeated heavy braking. The TY3 slotted face supports consistent pad contact and braking response. Performance Features Direct replacement: Designed as a bolt-on upgrade to the original front discs, with installation hardware included. Two-piece floating construction: Accommodates heat-related expansion to reduce disc stress. TY3 slotted disc face: Performance-oriented slot pattern for consistent friction-surface contact. High-carbon alloy friction rings: Engineered for demanding thermal loads and fatigue resistance. 72 curved ventilation vanes: Internal airflow passages promote heat dissipation. Corrosion-resistant plating: Protects exposed surfaces against corrosion. Reduced unsprung mass: Brembo highlights weight savings of up to 30% for its two-piece disc range; actual savings depend on the original disc. Technical Specifications Manufacturer: Brembo Product line: UPGRADE 2-Piece Part number: 103.8006A Axle: Front Disc diameter: 350 mm Disc thickness: 34 mm Disc face: TY3 slotted Construction: Two-piece floating Material: Advanced high-carbon alloy Finish: Corrosion-resistant plating Vanes: 72 curved, ventilated Air gap: 17 mm Annulus: 68 mm Mounting: Floating D-bobbin with anti-rattle spring Vehicle Fitment Make / Model Submodel PCCB Required Model Years Porsche 718 Boxster GTS 4.0 — 2020–2025 Porsche 718 Boxster GTS Yes 2018–2019 Porsche 718 Boxster S Yes 2017–2025 Porsche 718 Boxster T Yes 2017–2025 Porsche 718 Boxster Standard Yes 2017–2025 Porsche 718 Cayman GTS 4.0 — 2020–2025 Porsche 718 Cayman GTS Yes 2018–2019 Porsche 718 Cayman S Yes 2017–2025 Porsche 718 Cayman T Yes 2017–2025 Porsche 718 Cayman Standard Yes 2017–2025 Porsche 911 [991.1] Carrera 2S Yes 2012–2016 Porsche 911 [991.1] Carrera 2S No 2012–2016 Porsche 911 [991.1] Carrera 4S Yes 2012–2016 Porsche 911 [991.1] Carrera 4S No 2012–2016 Porsche 911 [991.1] Carrera GTS Yes 2012–2016 Porsche 911 [991.1] Carrera GTS No 2012–2016 Porsche 911 [991.2] Carrera 2S No 2017–2019 Porsche 911 [991.2] Carrera 4S No 2017–2019 Porsche 911 [991.2] Carrera GTS No 2017–2019 Porsche 911 [992.1] Carrera 2S No 2020–2024 Porsche 911 [992.1] Carrera 4S No 2020–2024 Porsche 911 [992.2] Carrera 2 No 2025–2026 Porsche 911 [992.2] Carrera 4 No 2025–2026 Porsche 911 [992.2] Carrera T No 2025–2026 Porsche 911 [996] Turbo Yes 2002–2005 Porsche 911 [997] Carrera 2 GTS Yes 2005–2012 Porsche 911 [997] Carrera 2S — 2005–2012 Porsche 911 [997] Carrera 2S Yes 2005–2012 Porsche 911 [997] Carrera 4 GTS Yes 2006–2012 Porsche 911 [997] Carrera 4S — 2006–2012 Porsche 911 [997] Carrera 4S Yes 2006–2012 Porsche 911 [997] Turbo No 2006–2012 Porsche 981 Boxster GTS Yes 2015–2016 Porsche 981 Boxster S Yes 2012–2016 Porsche 981 Boxster Spyder Yes 2016 Porsche 981 Boxster Spyder No 2016 Porsche 981 Boxster Standard Yes 2012–2016 Porsche 987 Boxster S Yes 2005–2011 Porsche 987 Boxster Spyder Yes 2005–2011 Porsche 981 Cayman GTS Yes 2015–2016 Porsche 981 Cayman S Yes 2013–2016 Porsche 981 Cayman Standard Yes 2013–2016 Porsche 987 Cayman R Yes 2012 Porsche 987 Cayman S Yes 2006–2012 What’s Included Brembo UPGRADE front two-piece brake disc set with the installation hardware specified by Race Technologies. Brake pads are sold separately. Installation note: Professional installation and correct brake pad bedding are recommended.
AP_Racing_J-Hook_Disc_Porsche_992_GT3-390x32mm-Rear_SKU_13.01.20026_Single_image
AP Racing 350mmx34mm 2-piece J Hook Front Brake Rotors for Porsche (OEM Iron) $2,399.00
AP Racing 350x34mm 2-piece J Hook Front Floating Racing Brake Rotors Fit The Following Cars (w/ OEM Iron Rotors) Porsche 991 S/4S/GTS (Front) Porsche 992 S/4S/GTS (Front) AP Racing 2-piece Competition J Hook front disc pair for  with iron discs 350mm x 34mm (13.78" x 1.34") 72 Vane, D66 Huge increase in airflow, cooling capacity, and durability vs. OEM discs Saves 2 lbs. unsprung weight per side vs. OEM iron discs Designed for: club racing, time trial, auto-x, HPDE Works with OEM calipers, no modifications required Ultralight, fully floating, anodized billet aluminum hat with float control/anti-rattle clips Sold/priced per pair. AP Racing J Hook Brake Rotors – The Gold Standard in Track Day & Racing Performance Engineered for professional motorsport, HPDE, and dedicated track day use, AP Racing’s J Hook Brake Rotors deliver uncompromising performance, thermal stability, and consistent braking power. These two-piece, floating rotors are built to handle the extreme demands of road racing, with design features derived from over 50 years of elite competition—including Formula 1, NASCAR, and IMSA. Unlike conventional one-piece rotors, AP Racing’s two-piece floating design features a billet aluminum hat mated to a cast iron disc via precision-engineered bobbins. This setup allows for controlled radial expansion under high heat, minimizing distortion and coning. The result? More even pad wear, a firmer pedal feel, and longer component life, even during extended lapping sessions or endurance racing. Floating hardware includes anti-knockback spring clips that reduce piston retraction while eliminating common NVH issues like rattling. Why Choose AP Racing J Hook Rotors? Advanced Cooling, Superior Bite, Unmatched Durability At the heart of every rotor is AP Racing’s proprietary high-carbon iron alloy, developed to withstand repeated thermal cycling without cracking or warping. Internally, directional vanes—far superior to OEM pillar or straight vane designs—maximize airflow and cooling. With 60 to 84 vanes per rotor, AP Racing achieves faster heat evacuation, reduced brake fade, and a more consistent friction surface. These rotors are left/right-specific for optimal airflow and balance. The exclusive J Hook slot pattern offers enhanced initial bite and promotes uniform heat distribution across the rotor face, reducing pad deposits and vibration. Unlike drilled rotors or straight-slot competitors, the J Hook design provides cleaner pad transfer during bed-in and superior modulation under braking—ideal for serious drivers who demand feedback and control. Yes, you might hear a little more whirr, but you’ll gain the stopping power, consistency, and longevity your lap times demand. Premium Components, Affordable Performance The rotor hats are CNC-machined from 6061-T6 billet aluminum and hard anodized for strength and heat resistance. Scalloped edges under the hat further assist heat dissipation. All hardware is U.S.-made to AP Racing spec, the same quality found on pro-level racing platforms. And while these rotors are race-proven, they’re also surprisingly cost-effective to replace. Don’t settle for cheap rotors that crack after a weekend—AP’s J Hook rings offer better durability and real long-term value. Fewer replacements mean more track time, less downtime, and peace of mind knowing you're running the best. Used by Champions. Trusted by Experts. From endurance racers to HPDE enthusiasts, AP Racing brake rotors are trusted worldwide for their reliability, longevity, and performance under pressure. Whether you're shaving seconds off your lap time or building a dedicated track car, the J Hook delivers a professional-grade solution that won’t let you down.   AP Racing J Hook Brake Rotors for Auto Racing, Track Days & HPDE Why Rotor Design Matters: Heat Expansion and Floating Technology As with most metals, iron brake discs expand significantly under heat. When temperatures rise, the disc grows radially—expanding in both diameter and circumference. Traditional one-piece rotors struggle to accommodate this natural expansion. As the outer edge pulls away from the center under heat stress, it creates a condition called “coning”—a distortion that compromises pad-to-rotor contact. This distortion can lead to uneven pad wear, brake tapering, and an inconsistent, long brake pedal. AP Racing two-piece floating brake rotors are purpose-built to eliminate these issues. Engineered with “float” built into the disc or hat assembly, these rotors feature oblong-shaped mounting holes that allow the hardware to slide as the disc heats up. This flexibility ensures the disc runs true within the caliper under high-temperature loads, effectively reducing distortion, minimizing pad taper and stress cracks, and promoting longer component life. Custom Mounting Hardware & Anti-Knockback Spring Clips AP Racing rotors utilize application-specific, U.S.-made mounting hardware—not generic bolts. These premium components are the exact parts used in AP’s professional motorsport products, engineered to withstand the rigors of competitive racing. To manage lateral disc motion that can push caliper pistons backward (known as knockback), AP Racing integrates anti-knockback spring clips on alternating bobbins—five on a ten-bolt setup, six on a twelve-bolt disc. These clips keep the aluminum hat and iron disc ring properly aligned while still allowing for radial float. Bonus: they eliminate annoying rattles and vibrations, ensuring a quieter, more refined braking experience. High-Performance Hat Design for Heat Isolation The disc hats in AP Racing’s two-piece floating rotors are CNC-machined from 6061-T6 billet aluminum and finished with a hard anodized coating. This high-strength aluminum alloy was selected for its ability to maintain structural integrity even at elevated temperatures. AP adds scalloped channels beneath the hat to further encourage airflow and heat evacuation from the outer disc face, minimizing thermal transfer to hubs and wheel bearings—helping reduce maintenance costs on these expensive components. Internal Vane Engineering: Airflow Optimization & Thermal Stability AP Racing’s internal vane design sets them apart from OEM and most aftermarket competitors. While many factory brake discs use non-directional pillar vanes (low-cost and NVH-focused), AP Racing rotors use directional vanes engineered for maximum airflow. These rotors are side-specific—meaning you’ll receive a unique left and right disc in each set—ensuring optimized cooling through strategic vane orientation and shape. Beyond that, AP Racing rotors feature a superior vane count, typically ranging from 60 to 84 vanes, compared to 30–48 in most aftermarket rotors. After extensive CFD and thermal analysis, this high vane count was proven to: Increase airspeed and thermal transfer Reduce recirculation and deflection at the disc face Minimize coning, cracking, and brake fade Deliver more even pad contact and extended rotor life J Hook Slot Pattern: Exclusive to AP Racing Slots and drill holes may improve initial bite, but they also introduce “cool spots” in the rotor face—areas of uneven heating that can lead to stress risers, cracks, and pad vibration. OEM rotors often avoid this by leaving the disc face blank, but that compromises bite and brake feel. AP Racing’s patented J Hook design, developed through rigorous R&D, solves this problem. The hooks are meticulously spaced around the disc’s circumference and from hat to edge, forming a continuous distortion path that ensures even heat distribution. This encourages uniform pad deposits during bed-in, helps reduce judder and cracking, and improves consistency under repeated high-load braking. In addition, the J Hook slots provide more leading edges for pads to grip than traditional curved slots or blank rotors. While this might generate a mild whirring sound during braking, the benefits—more bite, cleaner bedding, better pedal feel—make it the top choice for committed racers and serious track day drivers. Metallurgy Backed by 50+ Years of Motorsport Leadership AP Racing's reputation is built on performance, and their proprietary iron alloy used in J Hook rotors is no exception. Drawing from over five decades of elite motorsport experience, including 750+ Formula 1 wins and widespread use across NASCAR, AP’s engineers have developed a disc alloy that excels under sustained racing temperatures and stress. Where OEM discs focus on affordability and mass production, AP Racing’s J Hook rotors are purpose-built for motorsport durability and heat resistance. Affordable Replacement Cost: Serious Value for Serious Drivers Even the best brake rotors are consumables. When you drive hard—especially at the track—your discs will eventually wear out. That’s why AP Racing designed their replacement iron rings to be cost-effective, allowing you to replace worn parts without breaking the bank. Compare that to constantly buying cheap $150 rotors every weekend—rotors that can't handle the heat and need to be swapped frequently. With AP Racing’s J Hook rotors, you get longer service intervals, less downtime, and better performance over time, making them an incredibly smart long-term investment. Proven on Track. Trusted by Champions. Top-tier racing teams rely on AP Racing J Hook rotors for one reason: they perform under pressure. Whether you're running time trials, attending HPDE events, or competing in wheel-to-wheel racing, these rotors offer professional-grade reliability, safety, and performance. Bedding and preparation of AP Racing J Hook Disc Properly preparing your new brake discs before heavy use is extremely important. The goal of bedding-in your brake pads and discs is to mate them together properly and prepare them for heavy use.  When prepared properly, or bed-in, your pads will transfer a thin layer of material to the disc face (transfer layer).  The pads in your caliper will then actually ride on that thin layer of pad material you’ve put down on the rotor, rather than rubbing directly on the iron rotor face.  A good transfer layer is going to give you superior brake pedal feel, less noise, superior pad wear, and lower the chances of cracking your discs. Important Notes- PLEASE READ! First, make sure you are on a closed course to perform a proper bed-in.  Do NOT perform the procedure on public roads.  You need a stretch of asphalt with long straights, good visibility, and no potential obstructions.  Make sure you are in a position to safely and repeatedly attain the necessary speeds to perform the bed-in procedure.  A controlled racetrack is the best place to perform this procedure.  AP Racing and Competition Motorsport in no way suggest or condone speeding on public roads or breaking the law in your car, nor do we take responsibility for any damage or injury that occurs as a result of using our product or these procedures.  You are performing the bed-in procedure at your own risk.  During these procedures, it’s critical that you never come to a complete stop with your foot on the brake pedal.  If you have brake ducts on your car, you may want to block them off to allow your brake system to heat up easily. The procedure outlined below is a generic procedure for most types of mild race pad.  Please check your pad manufacturer’s recommended bed-in procedure. Accelerate to approximately 60mph and then decelerate down to 5 mph.  If your car has ABS, you should try to hold the brakes at a point just before ABS intervention.  Once the car slows to 5mph, immediately accelerate back up to about 60mph, and brake again to roughly 5mph.  Repeat this series of stopping and accelerating 8 to 10 times.  Again, do not come to a complete stop with your foot on the brake pedal. Cool the brake system down by cruising at 45mph+ for 5 to 10 minutes. Visually inspect your discs.  They should be a blue/grey color (instead of shiny silver), and have an even layer of pad material across and around the entire rotor face. If the AP Racing rotors don’t have a layer of pad material on them, perform another series of stops in the manner outlined above.
ap-racing-j-hook-replacement-rotor-rings-hardware-image
AP Racing 365x30mm Replacement Brake Rotor Rings for Porsche $2,368.00
AP Racing J Hook 365x30mm Replacement Brake Rotor Rings This kit is two replacement rotor discs and associated installation hardware only. Center hat is not included. Replacement discs for AP Racing 13.01.20097. Fits The Following Cars: Porsche 991 911 Carrera Porsche 991 911 S/4S/GTS Porsche 992 911 Carrera Sold/priced per pair of rotor rings (including hardware). 365x30mm (14.37" x 1.18") 72-vane, D66, J Hook Iron Racing Brake Disc Replacements AP Racing J Hook Brake Rotors – The Gold Standard in Track Day & Racing Performance Engineered for professional motorsport, HPDE, and dedicated track day use, AP Racing’s J Hook Brake Rotors deliver uncompromising performance, thermal stability, and consistent braking power. These two-piece, floating rotors are built to handle the extreme demands of road racing, with design features derived from over 50 years of elite competition—including Formula 1, NASCAR, and IMSA. Unlike conventional one-piece rotors, AP Racing’s two-piece floating design features a billet aluminum hat mated to a cast iron disc via precision-engineered bobbins. This setup allows for controlled radial expansion under high heat, minimizing distortion and coning. The result? More even pad wear, a firmer pedal feel, and longer component life, even during extended lapping sessions or endurance racing. Floating hardware includes anti-knockback spring clips that reduce piston retraction while eliminating common NVH issues like rattling. Why Choose AP Racing J Hook Rotors? Advanced Cooling, Superior Bite, Unmatched Durability At the heart of every rotor is AP Racing’s proprietary high-carbon iron alloy, developed to withstand repeated thermal cycling without cracking or warping. Internally, directional vanes—far superior to OEM pillar or straight vane designs—maximize airflow and cooling. With 60 to 84 vanes per rotor, AP Racing achieves faster heat evacuation, reduced brake fade, and a more consistent friction surface. These rotors are left/right-specific for optimal airflow and balance. The exclusive J Hook slot pattern offers enhanced initial bite and promotes uniform heat distribution across the rotor face, reducing pad deposits and vibration. Unlike drilled rotors or straight-slot competitors, the J Hook design provides cleaner pad transfer during bed-in and superior modulation under braking—ideal for serious drivers who demand feedback and control. Yes, you might hear a little more whirr, but you’ll gain the stopping power, consistency, and longevity your lap times demand. Premium Components, Affordable Performance The rotor hats are CNC-machined from 6061-T6 billet aluminum and hard anodized for strength and heat resistance. Scalloped edges under the hat further assist heat dissipation. All hardware is U.S.-made to AP Racing spec, the same quality found on pro-level racing platforms. And while these rotors are race-proven, they’re also surprisingly cost-effective to replace. Don’t settle for cheap rotors that crack after a weekend—AP’s J Hook rings offer better durability and real long-term value. Fewer replacements mean more track time, less downtime, and peace of mind knowing you're running the best. Used by Champions. Trusted by Experts. From endurance racers to HPDE enthusiasts, AP Racing brake rotors are trusted worldwide for their reliability, longevity, and performance under pressure. Whether you're shaving seconds off your lap time or building a dedicated track car, the J Hook delivers a professional-grade solution that won’t let you down. AP Racing J Hook Brake Rotors for Auto Racing, Track Days & HPDE Why Rotor Design Matters: Heat Expansion and Floating Technology As with most metals, iron brake discs expand significantly under heat. When temperatures rise, the disc grows radially—expanding in both diameter and circumference. Traditional one-piece rotors struggle to accommodate this natural expansion. As the outer edge pulls away from the center under heat stress, it creates a condition called “coning”—a distortion that compromises pad-to-rotor contact. This distortion can lead to uneven pad wear, brake tapering, and an inconsistent, long brake pedal. AP Racing two-piece floating brake rotors are purpose-built to eliminate these issues. Engineered with “float” built into the disc or hat assembly, these rotors feature oblong-shaped mounting holes that allow the hardware to slide as the disc heats up. This flexibility ensures the disc runs true within the caliper under high-temperature loads, effectively reducing distortion, minimizing pad taper and stress cracks, and promoting longer component life. Custom Mounting Hardware & Anti-Knockback Spring Clips AP Racing rotors utilize application-specific, U.S.-made mounting hardware—not generic bolts. These premium components are the exact parts used in AP’s professional motorsport products, engineered to withstand the rigors of competitive racing. To manage lateral disc motion that can push caliper pistons backward (known as knockback), AP Racing integrates anti-knockback spring clips on alternating bobbins—five on a ten-bolt setup, six on a twelve-bolt disc. These clips keep the aluminum hat and iron disc ring properly aligned while still allowing for radial float. Bonus: they eliminate annoying rattles and vibrations, ensuring a quieter, more refined braking experience. High-Performance Hat Design for Heat Isolation The disc hats in AP Racing’s two-piece floating rotors are CNC-machined from 6061-T6 billet aluminum and finished with a hard anodized coating. This high-strength aluminum alloy was selected for its ability to maintain structural integrity even at elevated temperatures. AP adds scalloped channels beneath the hat to further encourage airflow and heat evacuation from the outer disc face, minimizing thermal transfer to hubs and wheel bearings—helping reduce maintenance costs on these expensive components. Internal Vane Engineering: Airflow Optimization & Thermal Stability AP Racing’s internal vane design sets them apart from OEM and most aftermarket competitors. While many factory brake discs use non-directional pillar vanes (low-cost and NVH-focused), AP Racing rotors use directional vanes engineered for maximum airflow. These rotors are side-specific—meaning you’ll receive a unique left and right disc in each set—ensuring optimized cooling through strategic vane orientation and shape. Beyond that, AP Racing rotors feature a superior vane count, typically ranging from 60 to 84 vanes, compared to 30–48 in most aftermarket rotors. After extensive CFD and thermal analysis, this high vane count was proven to: Increase airspeed and thermal transfer Reduce recirculation and deflection at the disc face Minimize coning, cracking, and brake fade Deliver more even pad contact and extended rotor life J Hook Slot Pattern: Exclusive to AP Racing Slots and drill holes may improve initial bite, but they also introduce “cool spots” in the rotor face—areas of uneven heating that can lead to stress risers, cracks, and pad vibration. OEM rotors often avoid this by leaving the disc face blank, but that compromises bite and brake feel. AP Racing’s patented J Hook design, developed through rigorous R&D, solves this problem. The hooks are meticulously spaced around the disc’s circumference and from hat to edge, forming a continuous distortion path that ensures even heat distribution. This encourages uniform pad deposits during bed-in, helps reduce judder and cracking, and improves consistency under repeated high-load braking. In addition, the J Hook slots provide more leading edges for pads to grip than traditional curved slots or blank rotors. While this might generate a mild whirring sound during braking, the benefits—more bite, cleaner bedding, better pedal feel—make it the top choice for committed racers and serious track day drivers. Metallurgy Backed by 50+ Years of Motorsport Leadership AP Racing's reputation is built on performance, and their proprietary iron alloy used in J Hook rotors is no exception. Drawing from over five decades of elite motorsport experience, including 750+ Formula 1 wins and widespread use across NASCAR, AP’s engineers have developed a disc alloy that excels under sustained racing temperatures and stress. Where OEM discs focus on affordability and mass production, AP Racing’s J Hook rotors are purpose-built for motorsport durability and heat resistance. Affordable Replacement Cost: Serious Value for Serious Drivers Even the best brake rotors are consumables. When you drive hard—especially at the track—your discs will eventually wear out. That’s why AP Racing designed their replacement iron rings to be cost-effective, allowing you to replace worn parts without breaking the bank. Compare that to constantly buying cheap $150 rotors every weekend—rotors that can't handle the heat and need to be swapped frequently. With AP Racing’s J Hook rotors, you get longer service intervals, less downtime, and better performance over time, making them an incredibly smart long-term investment. Proven on Track. Trusted by Champions. Top-tier racing teams rely on AP Racing J Hook rotors for one reason: they perform under pressure. Whether you're running time trials, attending HPDE events, or competing in wheel-to-wheel racing, these rotors offer professional-grade reliability, safety, and performance. Bedding and Preparation of AP Racing J Hook Discs Properly preparing your new brake discs before heavy use is extremely important. The goal of bedding-in your brake pads and discs is to mate them together properly and prepare them for heavy use.  When prepared properly, or bed-in, your pads will transfer a thin layer of material to the disc face (transfer layer).  The pads in your caliper will then actually ride on that thin layer of pad material you’ve put down on the rotor, rather than rubbing directly on the iron rotor face.  A good transfer layer is going to give you superior brake pedal feel, less noise, superior pad wear, and lower the chances of cracking your discs. Important Notes- PLEASE READ! First, make sure you are on a closed course to perform a proper bed-in.  Do NOT perform the procedure on public roads.  You need a stretch of asphalt with long straights, good visibility, and no potential obstructions.  Make sure you are in a position to safely and repeatedly attain the necessary speeds to perform the bed-in procedure.  A controlled racetrack is the best place to perform this procedure.  AP Racing and Competition Motorsport in no way suggest or condone speeding on public roads or breaking the law in your car, nor do we take responsibility for any damage or injury that occurs as a result of using our product or these procedures.  You are performing the bed-in procedure at your own risk.  During these procedures, it’s critical that you never come to a complete stop with your foot on the brake pedal.  If you have brake ducts on your car, you may want to block them off to allow your brake system to heat up easily. The procedure outlined below is a generic procedure for most types of mild race pad.  Please check your pad manufacturer’s recommended bed-in procedure. Accelerate to approximately 60mph and then decelerate down to 5 mph.  If your car has ABS, you should try to hold the brakes at a point just before ABS intervention.  Once the car slows to 5mph, immediately accelerate back up to about 60mph, and brake again to roughly 5mph.  Repeat this series of stopping and accelerating 8 to 10 times.  Again, do not come to a complete stop with your foot on the brake pedal. Cool the brake system down by cruising at 45mph+ for 5 to 10 minutes. Visually inspect your discs.  They should be a blue/grey color (instead of shiny silver), and have an even layer of pad material across and around the entire rotor face. If the AP Racing rotors don’t have a layer of pad material on them, perform another series of stops in the manner outlined above.
ap-racing-j-hook-replacement-rotor-rings-hardware-image
AP Racing 372x34mm Replacement Brake Rotor Rings for Porsche $2,368.00
AP Racing J Hook 372x34mm Replacement Brake Rotor Rings This kit is two replacement rotor discs and associated installation hardware only. Center hat is not included. Replacement discs for AP Racing 13.01.20182. Fits The Following Cars: Porsche 991 911 Carrera Porsche 991 911 S/4S/GTS Porsche 992 911 Carrera Sold/priced per pair of rotor rings (including hardware). 372x34mm (14.65" x 1.34") 72-vane, D66, J Hook Iron Racing Brake Disc Replacements AP Racing J Hook Brake Rotors – The Gold Standard in Track Day & Racing Performance Engineered for professional motorsport, HPDE, and dedicated track day use, AP Racing’s J Hook Brake Rotors deliver uncompromising performance, thermal stability, and consistent braking power. These two-piece, floating rotors are built to handle the extreme demands of road racing, with design features derived from over 50 years of elite competition—including Formula 1, NASCAR, and IMSA. Unlike conventional one-piece rotors, AP Racing’s two-piece floating design features a billet aluminum hat mated to a cast iron disc via precision-engineered bobbins. This setup allows for controlled radial expansion under high heat, minimizing distortion and coning. The result? More even pad wear, a firmer pedal feel, and longer component life, even during extended lapping sessions or endurance racing. Floating hardware includes anti-knockback spring clips that reduce piston retraction while eliminating common NVH issues like rattling. Why Choose AP Racing J Hook Rotors? Advanced Cooling, Superior Bite, Unmatched Durability At the heart of every rotor is AP Racing’s proprietary high-carbon iron alloy, developed to withstand repeated thermal cycling without cracking or warping. Internally, directional vanes—far superior to OEM pillar or straight vane designs—maximize airflow and cooling. With 60 to 84 vanes per rotor, AP Racing achieves faster heat evacuation, reduced brake fade, and a more consistent friction surface. These rotors are left/right-specific for optimal airflow and balance. The exclusive J Hook slot pattern offers enhanced initial bite and promotes uniform heat distribution across the rotor face, reducing pad deposits and vibration. Unlike drilled rotors or straight-slot competitors, the J Hook design provides cleaner pad transfer during bed-in and superior modulation under braking—ideal for serious drivers who demand feedback and control. Yes, you might hear a little more whirr, but you’ll gain the stopping power, consistency, and longevity your lap times demand. Premium Components, Affordable Performance The rotor hats are CNC-machined from 6061-T6 billet aluminum and hard anodized for strength and heat resistance. Scalloped edges under the hat further assist heat dissipation. All hardware is U.S.-made to AP Racing spec, the same quality found on pro-level racing platforms. And while these rotors are race-proven, they’re also surprisingly cost-effective to replace. Don’t settle for cheap rotors that crack after a weekend—AP’s J Hook rings offer better durability and real long-term value. Fewer replacements mean more track time, less downtime, and peace of mind knowing you're running the best. Used by Champions. Trusted by Experts. From endurance racers to HPDE enthusiasts, AP Racing brake rotors are trusted worldwide for their reliability, longevity, and performance under pressure. Whether you're shaving seconds off your lap time or building a dedicated track car, the J Hook delivers a professional-grade solution that won’t let you down. AP Racing J Hook Brake Rotors for Auto Racing, Track Days & HPDE Why Rotor Design Matters: Heat Expansion and Floating Technology As with most metals, iron brake discs expand significantly under heat. When temperatures rise, the disc grows radially—expanding in both diameter and circumference. Traditional one-piece rotors struggle to accommodate this natural expansion. As the outer edge pulls away from the center under heat stress, it creates a condition called “coning”—a distortion that compromises pad-to-rotor contact. This distortion can lead to uneven pad wear, brake tapering, and an inconsistent, long brake pedal. AP Racing two-piece floating brake rotors are purpose-built to eliminate these issues. Engineered with “float” built into the disc or hat assembly, these rotors feature oblong-shaped mounting holes that allow the hardware to slide as the disc heats up. This flexibility ensures the disc runs true within the caliper under high-temperature loads, effectively reducing distortion, minimizing pad taper and stress cracks, and promoting longer component life. Custom Mounting Hardware & Anti-Knockback Spring Clips AP Racing rotors utilize application-specific, U.S.-made mounting hardware—not generic bolts. These premium components are the exact parts used in AP’s professional motorsport products, engineered to withstand the rigors of competitive racing. To manage lateral disc motion that can push caliper pistons backward (known as knockback), AP Racing integrates anti-knockback spring clips on alternating bobbins—five on a ten-bolt setup, six on a twelve-bolt disc. These clips keep the aluminum hat and iron disc ring properly aligned while still allowing for radial float. Bonus: they eliminate annoying rattles and vibrations, ensuring a quieter, more refined braking experience. High-Performance Hat Design for Heat Isolation The disc hats in AP Racing’s two-piece floating rotors are CNC-machined from 6061-T6 billet aluminum and finished with a hard anodized coating. This high-strength aluminum alloy was selected for its ability to maintain structural integrity even at elevated temperatures. AP adds scalloped channels beneath the hat to further encourage airflow and heat evacuation from the outer disc face, minimizing thermal transfer to hubs and wheel bearings—helping reduce maintenance costs on these expensive components. Internal Vane Engineering: Airflow Optimization & Thermal Stability AP Racing’s internal vane design sets them apart from OEM and most aftermarket competitors. While many factory brake discs use non-directional pillar vanes (low-cost and NVH-focused), AP Racing rotors use directional vanes engineered for maximum airflow. These rotors are side-specific—meaning you’ll receive a unique left and right disc in each set—ensuring optimized cooling through strategic vane orientation and shape. Beyond that, AP Racing rotors feature a superior vane count, typically ranging from 60 to 84 vanes, compared to 30–48 in most aftermarket rotors. After extensive CFD and thermal analysis, this high vane count was proven to: Increase airspeed and thermal transfer Reduce recirculation and deflection at the disc face Minimize coning, cracking, and brake fade Deliver more even pad contact and extended rotor life J Hook Slot Pattern: Exclusive to AP Racing Slots and drill holes may improve initial bite, but they also introduce “cool spots” in the rotor face—areas of uneven heating that can lead to stress risers, cracks, and pad vibration. OEM rotors often avoid this by leaving the disc face blank, but that compromises bite and brake feel. AP Racing’s patented J Hook design, developed through rigorous R&D, solves this problem. The hooks are meticulously spaced around the disc’s circumference and from hat to edge, forming a continuous distortion path that ensures even heat distribution. This encourages uniform pad deposits during bed-in, helps reduce judder and cracking, and improves consistency under repeated high-load braking. In addition, the J Hook slots provide more leading edges for pads to grip than traditional curved slots or blank rotors. While this might generate a mild whirring sound during braking, the benefits—more bite, cleaner bedding, better pedal feel—make it the top choice for committed racers and serious track day drivers. Metallurgy Backed by 50+ Years of Motorsport Leadership AP Racing's reputation is built on performance, and their proprietary iron alloy used in J Hook rotors is no exception. Drawing from over five decades of elite motorsport experience, including 750+ Formula 1 wins and widespread use across NASCAR, AP’s engineers have developed a disc alloy that excels under sustained racing temperatures and stress. Where OEM discs focus on affordability and mass production, AP Racing’s J Hook rotors are purpose-built for motorsport durability and heat resistance. Affordable Replacement Cost: Serious Value for Serious Drivers Even the best brake rotors are consumables. When you drive hard—especially at the track—your discs will eventually wear out. That’s why AP Racing designed their replacement iron rings to be cost-effective, allowing you to replace worn parts without breaking the bank. Compare that to constantly buying cheap $150 rotors every weekend—rotors that can't handle the heat and need to be swapped frequently. With AP Racing’s J Hook rotors, you get longer service intervals, less downtime, and better performance over time, making them an incredibly smart long-term investment. Proven on Track. Trusted by Champions. Top-tier racing teams rely on AP Racing J Hook rotors for one reason: they perform under pressure. Whether you're running time trials, attending HPDE events, or competing in wheel-to-wheel racing, these rotors offer professional-grade reliability, safety, and performance. Bedding and Preparation of AP Racing J Hook Discs Properly preparing your new brake discs before heavy use is extremely important. The goal of bedding-in your brake pads and discs is to mate them together properly and prepare them for heavy use.  When prepared properly, or bed-in, your pads will transfer a thin layer of material to the disc face (transfer layer).  The pads in your caliper will then actually ride on that thin layer of pad material you’ve put down on the rotor, rather than rubbing directly on the iron rotor face.  A good transfer layer is going to give you superior brake pedal feel, less noise, superior pad wear, and lower the chances of cracking your discs. Important Notes- PLEASE READ! First, make sure you are on a closed course to perform a proper bed-in.  Do NOT perform the procedure on public roads.  You need a stretch of asphalt with long straights, good visibility, and no potential obstructions.  Make sure you are in a position to safely and repeatedly attain the necessary speeds to perform the bed-in procedure.  A controlled racetrack is the best place to perform this procedure.  AP Racing and Competition Motorsport in no way suggest or condone speeding on public roads or breaking the law in your car, nor do we take responsibility for any damage or injury that occurs as a result of using our product or these procedures.  You are performing the bed-in procedure at your own risk.  During these procedures, it’s critical that you never come to a complete stop with your foot on the brake pedal.  If you have brake ducts on your car, you may want to block them off to allow your brake system to heat up easily. The procedure outlined below is a generic procedure for most types of mild race pad.  Please check your pad manufacturer’s recommended bed-in procedure. Accelerate to approximately 60mph and then decelerate down to 5 mph.  If your car has ABS, you should try to hold the brakes at a point just before ABS intervention.  Once the car slows to 5mph, immediately accelerate back up to about 60mph, and brake again to roughly 5mph.  Repeat this series of stopping and accelerating 8 to 10 times.  Again, do not come to a complete stop with your foot on the brake pedal. Cool the brake system down by cruising at 45mph+ for 5 to 10 minutes. Visually inspect your discs.  They should be a blue/grey color (instead of shiny silver), and have an even layer of pad material across and around the entire rotor face. If the AP Racing rotors don’t have a layer of pad material on them, perform another series of stops in the manner outlined above.
ap-racing-j-hook-replacement-rotor-rings-hardware-image
AP Racing 390x36mm Replacement Brake Rotor Rings for Porsche $2,368.00
AP Racing J Hook 390x36mm Replacement Brake Rotor Rings This kit is two replacement rotor discs and associated installation hardware only. Center hat is not included. Replacement discs for AP Racing 13.01.20145. Fits The Following Cars: Porsche 991 911 Carrera Porsche 991 911 S/4S/GTS Porsche 992 911 Carrera Sold/priced per pair of rotor rings (including hardware). 390x36mm (15.35" x 1.42") 72-vane, D66, J Hook Iron Racing Brake Disc Replacements AP Racing J Hook Brake Rotors – The Gold Standard in Track Day & Racing Performance Engineered for professional motorsport, HPDE, and dedicated track day use, AP Racing’s J Hook Brake Rotors deliver uncompromising performance, thermal stability, and consistent braking power. These two-piece, floating rotors are built to handle the extreme demands of road racing, with design features derived from over 50 years of elite competition—including Formula 1, NASCAR, and IMSA. Unlike conventional one-piece rotors, AP Racing’s two-piece floating design features a billet aluminum hat mated to a cast iron disc via precision-engineered bobbins. This setup allows for controlled radial expansion under high heat, minimizing distortion and coning. The result? More even pad wear, a firmer pedal feel, and longer component life, even during extended lapping sessions or endurance racing. Floating hardware includes anti-knockback spring clips that reduce piston retraction while eliminating common NVH issues like rattling. Why Choose AP Racing J Hook Rotors? Advanced Cooling, Superior Bite, Unmatched Durability At the heart of every rotor is AP Racing’s proprietary high-carbon iron alloy, developed to withstand repeated thermal cycling without cracking or warping. Internally, directional vanes—far superior to OEM pillar or straight vane designs—maximize airflow and cooling. With 60 to 84 vanes per rotor, AP Racing achieves faster heat evacuation, reduced brake fade, and a more consistent friction surface. These rotors are left/right-specific for optimal airflow and balance. The exclusive J Hook slot pattern offers enhanced initial bite and promotes uniform heat distribution across the rotor face, reducing pad deposits and vibration. Unlike drilled rotors or straight-slot competitors, the J Hook design provides cleaner pad transfer during bed-in and superior modulation under braking—ideal for serious drivers who demand feedback and control. Yes, you might hear a little more whirr, but you’ll gain the stopping power, consistency, and longevity your lap times demand. Premium Components, Affordable Performance The rotor hats are CNC-machined from 6061-T6 billet aluminum and hard anodized for strength and heat resistance. Scalloped edges under the hat further assist heat dissipation. All hardware is U.S.-made to AP Racing spec, the same quality found on pro-level racing platforms. And while these rotors are race-proven, they’re also surprisingly cost-effective to replace. Don’t settle for cheap rotors that crack after a weekend—AP’s J Hook rings offer better durability and real long-term value. Fewer replacements mean more track time, less downtime, and peace of mind knowing you're running the best. Used by Champions. Trusted by Experts. From endurance racers to HPDE enthusiasts, AP Racing brake rotors are trusted worldwide for their reliability, longevity, and performance under pressure. Whether you're shaving seconds off your lap time or building a dedicated track car, the J Hook delivers a professional-grade solution that won’t let you down. AP Racing J Hook Brake Rotors for Auto Racing, Track Days & HPDE Why Rotor Design Matters: Heat Expansion and Floating Technology As with most metals, iron brake discs expand significantly under heat. When temperatures rise, the disc grows radially—expanding in both diameter and circumference. Traditional one-piece rotors struggle to accommodate this natural expansion. As the outer edge pulls away from the center under heat stress, it creates a condition called “coning”—a distortion that compromises pad-to-rotor contact. This distortion can lead to uneven pad wear, brake tapering, and an inconsistent, long brake pedal. AP Racing two-piece floating brake rotors are purpose-built to eliminate these issues. Engineered with “float” built into the disc or hat assembly, these rotors feature oblong-shaped mounting holes that allow the hardware to slide as the disc heats up. This flexibility ensures the disc runs true within the caliper under high-temperature loads, effectively reducing distortion, minimizing pad taper and stress cracks, and promoting longer component life. Custom Mounting Hardware & Anti-Knockback Spring Clips AP Racing rotors utilize application-specific, U.S.-made mounting hardware—not generic bolts. These premium components are the exact parts used in AP’s professional motorsport products, engineered to withstand the rigors of competitive racing. To manage lateral disc motion that can push caliper pistons backward (known as knockback), AP Racing integrates anti-knockback spring clips on alternating bobbins—five on a ten-bolt setup, six on a twelve-bolt disc. These clips keep the aluminum hat and iron disc ring properly aligned while still allowing for radial float. Bonus: they eliminate annoying rattles and vibrations, ensuring a quieter, more refined braking experience. High-Performance Hat Design for Heat Isolation The disc hats in AP Racing’s two-piece floating rotors are CNC-machined from 6061-T6 billet aluminum and finished with a hard anodized coating. This high-strength aluminum alloy was selected for its ability to maintain structural integrity even at elevated temperatures. AP adds scalloped channels beneath the hat to further encourage airflow and heat evacuation from the outer disc face, minimizing thermal transfer to hubs and wheel bearings—helping reduce maintenance costs on these expensive components. Internal Vane Engineering: Airflow Optimization & Thermal Stability AP Racing’s internal vane design sets them apart from OEM and most aftermarket competitors. While many factory brake discs use non-directional pillar vanes (low-cost and NVH-focused), AP Racing rotors use directional vanes engineered for maximum airflow. These rotors are side-specific—meaning you’ll receive a unique left and right disc in each set—ensuring optimized cooling through strategic vane orientation and shape. Beyond that, AP Racing rotors feature a superior vane count, typically ranging from 60 to 84 vanes, compared to 30–48 in most aftermarket rotors. After extensive CFD and thermal analysis, this high vane count was proven to: Increase airspeed and thermal transfer Reduce recirculation and deflection at the disc face Minimize coning, cracking, and brake fade Deliver more even pad contact and extended rotor life J Hook Slot Pattern: Exclusive to AP Racing Slots and drill holes may improve initial bite, but they also introduce “cool spots” in the rotor face—areas of uneven heating that can lead to stress risers, cracks, and pad vibration. OEM rotors often avoid this by leaving the disc face blank, but that compromises bite and brake feel. AP Racing’s patented J Hook design, developed through rigorous R&D, solves this problem. The hooks are meticulously spaced around the disc’s circumference and from hat to edge, forming a continuous distortion path that ensures even heat distribution. This encourages uniform pad deposits during bed-in, helps reduce judder and cracking, and improves consistency under repeated high-load braking. In addition, the J Hook slots provide more leading edges for pads to grip than traditional curved slots or blank rotors. While this might generate a mild whirring sound during braking, the benefits—more bite, cleaner bedding, better pedal feel—make it the top choice for committed racers and serious track day drivers. Metallurgy Backed by 50+ Years of Motorsport Leadership AP Racing's reputation is built on performance, and their proprietary iron alloy used in J Hook rotors is no exception. Drawing from over five decades of elite motorsport experience, including 750+ Formula 1 wins and widespread use across NASCAR, AP’s engineers have developed a disc alloy that excels under sustained racing temperatures and stress. Where OEM discs focus on affordability and mass production, AP Racing’s J Hook rotors are purpose-built for motorsport durability and heat resistance. Affordable Replacement Cost: Serious Value for Serious Drivers Even the best brake rotors are consumables. When you drive hard—especially at the track—your discs will eventually wear out. That’s why AP Racing designed their replacement iron rings to be cost-effective, allowing you to replace worn parts without breaking the bank. Compare that to constantly buying cheap $150 rotors every weekend—rotors that can't handle the heat and need to be swapped frequently. With AP Racing’s J Hook rotors, you get longer service intervals, less downtime, and better performance over time, making them an incredibly smart long-term investment. Proven on Track. Trusted by Champions. Top-tier racing teams rely on AP Racing J Hook rotors for one reason: they perform under pressure. Whether you're running time trials, attending HPDE events, or competing in wheel-to-wheel racing, these rotors offer professional-grade reliability, safety, and performance. Bedding and Preparation of AP Racing J Hook Discs Properly preparing your new brake discs before heavy use is extremely important. The goal of bedding-in your brake pads and discs is to mate them together properly and prepare them for heavy use.  When prepared properly, or bed-in, your pads will transfer a thin layer of material to the disc face (transfer layer).  The pads in your caliper will then actually ride on that thin layer of pad material you’ve put down on the rotor, rather than rubbing directly on the iron rotor face.  A good transfer layer is going to give you superior brake pedal feel, less noise, superior pad wear, and lower the chances of cracking your discs. Important Notes- PLEASE READ! First, make sure you are on a closed course to perform a proper bed-in.  Do NOT perform the procedure on public roads.  You need a stretch of asphalt with long straights, good visibility, and no potential obstructions.  Make sure you are in a position to safely and repeatedly attain the necessary speeds to perform the bed-in procedure.  A controlled racetrack is the best place to perform this procedure.  AP Racing and Competition Motorsport in no way suggest or condone speeding on public roads or breaking the law in your car, nor do we take responsibility for any damage or injury that occurs as a result of using our product or these procedures.  You are performing the bed-in procedure at your own risk.  During these procedures, it’s critical that you never come to a complete stop with your foot on the brake pedal.  If you have brake ducts on your car, you may want to block them off to allow your brake system to heat up easily. The procedure outlined below is a generic procedure for most types of mild race pad.  Please check your pad manufacturer’s recommended bed-in procedure. Accelerate to approximately 60mph and then decelerate down to 5 mph.  If your car has ABS, you should try to hold the brakes at a point just before ABS intervention.  Once the car slows to 5mph, immediately accelerate back up to about 60mph, and brake again to roughly 5mph.  Repeat this series of stopping and accelerating 8 to 10 times.  Again, do not come to a complete stop with your foot on the brake pedal. Cool the brake system down by cruising at 45mph+ for 5 to 10 minutes. Visually inspect your discs.  They should be a blue/grey color (instead of shiny silver), and have an even layer of pad material across and around the entire rotor face. If the AP Racing rotors don’t have a layer of pad material on them, perform another series of stops in the manner outlined above.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa