A2-206 Girodisc 2pc Brake Rotors | McLaren
$3,122.00
Girodisc McLaren 390mm Rear Rotors
These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track.
GiroDisc A1-206Â Front Rotor Vehicle Fitment
McLaren 750S (Track Pack brakes)McLaren 765LT (Clubsport brakes)
Lightweight, High-Performance Rotor Assemblies
The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206).
GiroDisc A1-206 Front Rotor Features
Direct OEM replacement, no modifications required
2-piece floating rotor assemblies reduce unsprung weight
High-carbon iron rings for consistent braking performance
48 curved vanes for efficient cooling
Reusable 6061-T6 aluminum hats with black anodized finish
Manufactured and assembled in Bellingham, WA
Girodisc McLaren 390mm Front Rotors FAQs
Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications.
Do they work with OEM pads? No, requires new shape available here.
Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings.
Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling.
Related Products
A1-206 Girodisc McLaren 390mm Front Rotors
D2-206 Girodisc McLaren 390mm Rear Replacement Rings
D1-206 Girodisc McLaren 390mm Front Replacement Rings
A1-206 Girodisc 2pc Brake Rotors Mclaren
$3,122.00
Girodisc McLaren 390mm Front Rotors
These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track.
GiroDisc A1-206Â Front Rotor Vehicle Fitment
McLaren 750S (Standard and Track Pack)Mclaren ArturaMcLaren 765LT (standard and Clubsport Pro)McLaren 720SMcLaren 600LT
Lightweight, High-Performance Rotor Assemblies
The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206).
GiroDisc A1-206 Front Brake Features
Direct OEM replacement, no modifications required
2-piece floating rotor assemblies reduce unsprung weight
High-carbon iron rings for consistent braking performance
48 curved vanes for efficient cooling
Reusable 6061-T6 aluminum hats with black anodized finish
Manufactured and assembled in Bellingham, WA
Girodisc McLaren 390mm Front Rotors FAQs
Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications.
Do they work with OEM pads? Yes, and they are compatible with performance pad compounds.
Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings.
Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling.
Related Products
A2-206 Girodisc McLaren 390mm Rear Rotors
D2-206 Girodisc McLaren 390mm Rear Replacement Rings
D1-206 Girodisc McLaren 390mm Front Replacement Rings
A2-159 Girodisc McLaren 380mm Rear Rotors
$2,897.00
Girodisc McLaren 380mm Rear Rotors
Replace your factory carbon-ceramic rotors with Girodisc’s precision-engineered 380mm rear iron rotors for McLaren models. Designed as a direct bolt-on upgrade, these lightweight two-piece rotors deliver superior heat management, lower operating costs, and race-proven reliability—perfect for high-performance street driving or track duty.
Direct Replacement for OEM Carbon-Ceramic Rotors
The Girodisc system installs directly onto the McLaren’s factory hubs and calipers—no modifications required. Each rotor features a CNC-machined 6061-T6 aluminum hat and a proprietary high-carbon cast-iron friction ring. The floating two-piece design allows for controlled thermal expansion, maintaining consistent pad contact under extreme braking loads. The curved vane design functions as a centrifugal pump, drawing cooling air through the disc to regulate temperatures lap after lap.
Girodisc A2-159 Rear Rotor Vehicle Features
• Direct replacement for OEM 380mm carbon-ceramic rear rotors• 6061-T6 billet aluminum hats with hard-anodized finish• Proprietary high-carbon cast-iron friction rings poured and machined in the USA• Floating mount system with 12 cadmium-plated drive pins• Anti-noise spring washers eliminate rattle while maintaining float• Curved internal vanes provide superior airflow and cooling• Fully rebuildable—replace only the iron rings when worn• Sold/priced per pair
Girodisc A2-159 Rear Rotor Vehicle Fitment
McLaren 750S (Standard Brakes)McLaren 765LT (Standard Brakes)McLaren ArturaMcLaren 650SMcLaren 675LTMcLaren 600LTMcLaren 720SMcLaren 570S / 540C
Compatible with OEM carbon-ceramic braking systems and Brembo rear calipers.
Girodisc A2-159 Rear Rotor FAQs
Can these rotors replace McLaren’s OEM carbon-ceramic setup? Yes. Girodisc designed this kit as a direct iron conversion that reuses the original calipers, hubs, and mounting hardware.
What benefits do iron rotors provide over CCM rotors? Iron rotors offer greater heat capacity, improved modulation, and much lower replacement costs while maintaining excellent street manners.
Are these rotors compatible with factory ABS and traction control? Absolutely. Girodisc maintains OEM dimensions to ensure perfect compatibility with McLaren’s advanced brake electronics.
How do these perform under extended track use? Expect consistent pedal feel, reduced fade, and stable braking throughout long sessions—especially when paired with high-temperature pads and fluid.
Enhance your McLaren’s braking consistency and reliability with Girodisc’s 380mm rear rotors—precision-built for performance, endurance, and confidence at every corner.
D2-206 Girodisc Rear Replacement Rotor Rings | McLaren
$1,670.00
Girodisc McLaren 390mm Rear Replacement Rings
These Girodisc D2-206 rear replacement rings are sold as rings only and include replacement hardware. They are engineered to be used with existing Girodisc aluminum hats and are not compatible with OEM or other aftermarket hats.
GiroDisc D2-206 Replacement Iron Rotor Vehicle Fitment
McLaren 750S (Track Pack brakes)McLaren 765LT (Clubsport brakes)McLaren Senna
Serviceable Two-Piece Design
Rings are machined from proprietary high-carbon iron for durability and heat resistance. The 48 curved vane design acts as a centrifugal pump to draw air through the hub, improving cooling under sustained braking. Reusing your Girodisc hats helps control long-term running costs.
GiroDisc D2-206 Replacement Iron Rotor Vehicle Features
Replacement rings only; reuse Girodisc hats
Includes replacement hardware
High-carbon iron rings for reliable performance
48 curved vanes for effective cooling
Direct fit for Girodisc A2-206 rear rotor kits
Girodisc McLaren 390mm Rear Replacement Rings FAQs
Do these include hats? No, these are rings only and require Girodisc hats.
Are they sold as a pair? Yes, rings are sold in pairs with hardware.
Can I use factory hats? No, these rings are only for Girodisc hats.
What kit do these pair with? They are the replacement rings for A2-206 rear rotor kits.
D1-206 Girodisc Front Replacement Rotor Rings | McLaren 390mm
$1,670.00
Girodisc D1-206 Front Replacement Rotor Rings
Restore your braking system’s performance with Girodisc D1-206 front replacement rotor rings. These precision-engineered 355mm rotors are direct replacements for existing Girodisc two-piece front rotor assemblies, offering exceptional heat management, balance, and consistency under the toughest driving conditions.
GiroDisc D1-206 Replacement Iron Rotor Rings Fitment Guide
McLaren ArturaMcLaren 750S (Track Pack brakes)McLaren 765LT (Clubsport brakes)McLaren 720SMcLaren 620RNote: These are friction rings only. They attach to existing Girodisc aluminum hats using the supplied floating hardware kit.
Engineered for Performance and Reliability
Each Girodisc replacement ring is made from a proprietary high-carbon iron alloy, cast and machined entirely in the USA. The internal curved vane design acts as a centrifugal pump, pulling cooling air through the rotor to minimize heat and fade. This ensures consistent braking performance and long-term durability on both street and track.
GiroDisc D1-206 Features
• Direct replacement for Girodisc two-piece front rotors• High-carbon cast iron for improved heat dissipation• 355mm diameter for enhanced braking torque and cooling• Directional curved vane design for efficient airflow• Machined, balanced, and assembled in the USA• Includes complete floating hardware kit• Sold/priced per pair
GiroDisc D1-206Â Specifications
• Diameter: 390mm• Position: Front• Material: High-carbon cast iron• Includes: Two rotor rings and new hardware kit• Made in the USA• Sold/priced per pair
Girodisc D1-206 Replacement Ring FAQs
Will these fit OEM rotors? No. These replacement rings are designed for use with Girodisc two-piece rotor systems only.
Do they include new hardware? Yes. Each pair comes with a full hardware kit for secure and simple installation.
Can I install these myself? Installation is straightforward for anyone familiar with brake service. A torque wrench and Loctite are recommended for hardware installation.
Are these suitable for track use? Absolutely. Girodisc rotors are engineered for high-performance driving, maintaining consistent pedal feel through repeated high-heat cycles.
Get the most from your Audi’s braking system with Girodisc D1-206 front replacement rings — precision-engineered, track-proven, and proudly made in the USA.
Girodisc D2-159 McLaren 380mm Rear Replacement Rings
$1,525.00
D2-159 Girodisc McLaren 380mm Rear Replacement Rings
Refresh the braking performance of your McLaren with Girodisc D2-159 380mm rear replacement rings. These are direct-fit replacements for Girodisc two-piece rear rotors, designed to bolt to your existing aluminum hats using the included floating hardware kit. Replace only the wear surface and maintain your lightweight, high-performance Girodisc setup.
GiroDisc D2-159 Rear Rotor Replacement Iron Disc Vehicle Fitment
McLaren 750S (Standard Brakes)McLaren 765LT (Standard Brakes)McLaren ArturaMcLaren 650SMcLaren 675LTMcLaren 620RMcLaren 600LTMcLaren 720SMcLaren 570S / 540C
Note: For vehicles equipped with Girodisc 380mm two-piece rear rotor systems. Not compatible with OEM or carbon-ceramic rotors.
GiroDisc D2-159Â Features
• Sold as a left/right pair and includes full hardware kit• Direct replacements for Girodisc 380mm two-piece rear rotors• CNC-machined from high-carbon cast iron for superior heat control• Curved directional vanes increase cooling efficiency• Maintains OEM brake balance and ABS calibration• Designed exclusively for Girodisc aluminum hats – not compatible with OEM or other brands
GiroDisc D2-159Â Specifications
• Diameter: 380mm• Position: Rear• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rings and new hardware kit• Sold/priced per pair
Girodisc D2-159 Replacement Ring FAQs
Will these fit OEM McLaren rotors? No. These are made specifically for Girodisc two-piece rotor hats and will not fit factory or carbon-ceramic assemblies.
Are both sides included? Yes. Each D2-159 kit includes both left and right replacement rings plus a complete hardware kit.
Why replace just the rings instead of the full rotor? It saves cost, retains your Girodisc hats, and restores performance without replacing the full assembly.
Can I reuse the old hardware? No. Always install the new floating hardware included in the kit for proper fitment and long-term safety.
Upgrade your McLaren’s braking performance with Girodisc D2-159 380mm rear replacement rings — engineered for durability, heat control, and consistent stopping power on both street and track.
Cobalt RC54 Racing Brake Pads for McLaren GiroDisc Iron Rotor Conversion
$1,059.00
Cobalt RC54 Front Racing Brake Pads
McLaren GiroDisc Iron Rotor Conversion
Cobalt RC54 Front Brake Pad Fitment Application Guide for McLaren Iron Rotor Conversion
McLaren ArturaMcLaren 750S (standard brakes)McLaren 720SMcLaren 600LTMcLaren 620R
Used with GiroDisc Iron Conversion only. Do NOT use these pads with your OEM CCB Rotors.
These Cobalt brake pads are designed specifically for use with the Girodisc A1-206 rotor conversion kit for the McLaren 600LT and 720S. These specially-designed pads are available in two excellent breakthrough compounds: XR1 (Sprint) and XR2 (Endurance).
GiroDisc 4003.16 Brake Pads for McLaren Iron Conversion
from $1,046.00
GiroDisc 4003.16 Brake Pads for Iron Conversion Front
GiroDisc 4003.16 Front Brake Pad Fitment Application Guide for McLaren Iron Rotor Conversion
McLaren ArturaMcLaren 750S (standard brakes)McLaren 720SMcLaren 600LTMcLaren 620R
Used with GiroDisc Iron Conversion only. Do NOT use these pads with your OEM CCB Rotors.
GiroDisc 4003.16 Available Compounds
GP10 Street / Track-Day Compound Designed for spirited street use and mild track driving. Offers low dust, excellent cold bite, and smooth pedal feel with strong fade resistance.
GP30 Endurance Race Compound Built for extended high-temperature operation. Ideal for endurance racing and heavy track use where consistency and rotor life are key.
Important Fitment Note
Confirm the exact compound, SKU, caliper, axle position, and brake pad application before ordering. Some variants share the same pad-shape code but may have application notes that differ slightly by compound.
GiroDisc 4003.16 Brake Pads for Iron Conversion Front FAQs
Why are multiple SKUs combined on this listing?These options share the same GiroDisc brake pad shape code, so they are grouped together with the pad compound selected as the variant.
How do I choose the correct variant?Select the compound that matches your use case, then confirm the exact SKU and application text before checkout.
Are GP10, GP30, GP35, GP40, and other compounds the same pad?No. They may share the same pad shape, but the compounds are designed for different street, track, sprint, or endurance uses.
Should I verify fitment before ordering?Yes. Always verify the caliper, rotor conversion, axle position, and pad-shape requirement for your specific setup.
Choose the compound that fits your driving goals while keeping all matching pad-shape options in one easy-to-shop listing.
Pagid Racing Brake Pads 8283 (Front) | McLaren w/ Pagid RBD Kit
$1,026.00
Pagid Racing Brake Pad Shape 8283
Pagid 8283 Brake Pad Fitment Guide
Front Brake Pad Fitment Application Guide for McLaren Iron Rotor Conversion
McLaren ArturaMcLaren 750S (standard brakes)McLaren 720SMcLaren 600LTMcLaren 620R
Used with GiroDisc Iron Conversion only. Do NOT use these pads with your OEM CCB Rotors.
Make
Model
Build (Year)
Front
Rear
McLaren
720S [Pagid RBD 2.0 Kit]
2017 -
X
McLaren
600LT [Pagid RBD 2.0 Kit]
2018 -
X
McLaren
720S Spider [Pagid RBD 2.0 Kit]
2019 -
X
For the Pagid Racing Brake Disc System
An uncompromising and highly efficient partnership between brake pad and brake disc – this was the development criteria for Pagid's Racing Brake Disc & Pad System. Both pad and rotor characteristics were developed and set-up to work together in sprint, rally, and endurance racing applications.
Pagid RBD rotors sold separately.
Pagid Racing Brake Pads
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
GiroDisc 4004.15 Brake Pads for McLaren Iron Conversion
from $944.00
Girodisc 4004.15 GP-Series Rear Brake Pads
 McLaren Iron Conversion
Girodisc GP-Series rear pads for McLaren Iron Conversion systems provide a high-performance braking upgrade tailored for serious street drivers (GP10) and endurance-focused track users (GP30). These pads are precision-cut to the GP shape 4004 and engineered to deliver consistent modulation, heat stability, and long rotor life when paired with Girodisc iron conversion rotors.
Fits the Following GiroDisc Iron Conversion Rear Rotors for McLaren
McLaren 750S (Standard and Trackpack brakes)McLaren ArturaMcLaren 765LT (standard and Clubsport brakes)McLaren SennaMcLaren 720SMcLaren 620RMcLaren 600LTMcLaren MP4-12C (oem CCB)
Used with GiroDisc Iron Conversion only. Do NOT use these pads with your OEM CCB Rotors.
GP10 Street / Track-Day Compound Designed for spirited street use and mild track driving. Offers low dust, excellent cold bite, and smooth pedal feel with strong fade resistance.
GP30 Endurance Race Compound Built for extended high-temperature operation. Ideal for endurance racing and heavy track use where consistency and rotor life are key.
GiroDisc 4004 Brake Pad Features
• Precision-cut for Girodisc Iron Conversion rear systems• Excellent modulation and heat control across both compounds• Low rotor wear and stable friction at temperature• Direct-fit replacement for GP pad shape 4004• Sold/priced per axle set
GiroDisc 4004 Brake Pad Specifications
• Pad Shape: 4004• Position: Rear• Compounds included: GP10 Street / GP30 Endurance• Compatible Systems: Girodisc Iron Conversion kits only• Sold/priced per pair of pads (one axle set)
Girodisc GP-Series Pad FAQs
Do these pads fit OEM McLaren carbon-ceramic brakes? No. These pads are for Girodisc Iron Conversion kits only and will not fit factory PCCB/CCM calipers.
Which compound should I choose? GP10 is ideal for street and light track. GP30 is the choice for aggressive track use or endurance sessions.
Are these pads noisy? GP10 is generally quiet. GP30 may produce light noise during low-speed operation due to its high-heat race formulation.
Do I need to bed the pads? Yes—proper bedding ensures optimal friction transfer and prevents uneven pad deposits.
Girodisc 1382.17 Front Brake Pads for Iron Rotor Conversion
from $886.00
GiroDisc 1382 Front Racing Brake Pads for Iron Rotor ConversionsÂ
GiroDisc 1382.17 Front Brake Pad Fitment GuideÂ
McLaren 750S with TrackPackMcLaren 765LT (standard brakes and Clubsport Pack)McLaren SennaMcLaren 675LTMcLaren 650SMcLaren 570S / 570GTMcLaren MP4-12C (oem ccb)
Used with GiroDisc Iron Conversion only. Do NOT use these pads with your OEM CCB Rotors.
GiroDisc 1382.17 Front Brake Pad Compounds
GP10 Street / Track-Day Compound Designed for spirited street use and mild track driving. Offers low dust, excellent cold bite, and smooth pedal feel with strong fade resistance.
GP30 Endurance Race Compound Built for extended high-temperature operation. Ideal for endurance racing and heavy track use where consistency and rotor life are key.
GP35 All-around track and race compound—balancing endurance-pad longevity with sprint-pad bite. It’s best suited to HPDE, frequent track days, and racing where modulation and wear life both matter.Â
GiroDisc 1382 Brake Pad Frequently Asked Questions (FAQ)
Can I daily drive with GP10 pads?
GP10 is the best compromise between street and track use. Â
Do I need GiroDisc rotors to use these pads?
Yes, pairing these pads with GiroDisc two-piece rotors is recommended for the best results.
Pagid Racing Brake Pads 8284 (Rear) | McLaren w/ Pagid RBD Kit
$809.00
Pagid Racing Brake Pad Shape 8284
Pagid 8284 Brake Pad Fitment Guide
Fits the Following GiroDisc Iron Conversion Rear Rotors for McLaren
McLaren 750S (Standard and Trackpack brakes)McLaren ArturaMcLaren 765LT (standard and Clubsport brakes)McLaren 720SMcLaren 620RMcLaren 600LTMcLaren MP4-12C (oem CCB)
Used with GiroDisc Iron Conversion only. Do NOT use these pads with your OEM CCB Rotors.
For the Pagid Racing Brake Disc System
Make
Model
Build (Year)
Front
Rear
McLaren
720S [Pagid RBD 2.0 Kit]
2017 -
  X
McLaren
600LT [Pagid RBD 2.0 Kit]
2018 -
  X
McLaren
720S Spider [Pagid RBD 2.0 Kit]
2019 -
  X
An uncompromising and highly efficient partnership between brake pad and brake disc – this was the development criteria for Pagid's Racing Brake Disc & Pad System. Both pad and rotor characteristics were developed and set-up to work together in sprint, rally, and endurance racing applications.
Pagid RBD rotors sold separately.
Pagid Racing Brake Pads
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Cobalt RC55 Racing Brake Pads McLaren Girodisc Iron Rotor Conversion
$705.00
Cobalt RC55 Racing Brake Pads
McLaren with Girodisc Iron Rotor Conversion (Rear)
These Cobalt brake pads are designed specifically for use with the Girodisc iron rotor conversion kit for the McLaren. These specially-designed rear pads are available in two compounds that have been optimized to provide unsurpassed performance with either matching Cobalt McLaren front pads.
Cobalt RC55 Rear Brake Pad Fitment Guide for GiroDisc Iron Rotor conversion for McLaren
McLaren 750S (Standard and Trackpack brakes)McLaren ArturaMcLaren 765LT (standard and Clubsport brakes)McLaren 720SMcLaren 620RMcLaren 600LTMcLaren MP4-12C (oem CCB)
Used with GiroDisc Iron Conversion only. Do NOT use these pads with your OEM CCB Rotors.
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Â
Castrol React SRF Synthetic Racing Brake Fluid (1000 ml)
from $146.00
Castrol React SRF Racing Brake Fluid
Ultra-High Wet Boiling Point Makes Castrol SRF A Standout
Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance.
The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids!
Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications.
Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid.
Castrol React SRF Racing Brake Fluid Typical Properties:
Dry Boiling Point: 590°F (310°C)
Wet Boiling Point: 518°F (270°C)
Superior anti-vapor lock properties
One-liter (1000ml) bottle
HALO P1 Advanced High Performance Brake Fluid (590 ml)
$109.00
HALO P1 High Performance Brake Fluid
The World's Most Advanced Racing Brake Fluid
Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide.
Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times.Sold in 590 ml (20 fl. oz.) bottles.
Features & Benefits That'll Make You Weep Tears of Joy
Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners.
Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot).
World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard.
Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills.
What Makes Halo P1 The Secret Weapon?
While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures.
FAQs That'll Clear the Air
Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have:
Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended.
How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb.
The Call to Action You've Been Waiting For
So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.