00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Lamborghini Urus Carbon Fiber Complete Engine Bay
$3,769.00
$5,384.00
C3 Carbon Lamborghini Urus Carbon Fiber Complete Engine Bay
FITS: Lamborghini Urus/Urus S/Urus Performante (2019+)
INTRODUCTION SALE: SAVE $500!
Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price.
C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out. The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine.
FEATURES:
Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs easily without any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Lamborghini Urus Carbon Fiber Engine Bay Panels
$2,242.00
$3,203.00
C3 Carbon Lamborghini Urus Carbon Fiber Engine Bay Panels
FITS: Lamborghini Urus/Urus S/Urus Performante (2019+)
Â
Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price.
C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out. The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine.
FEATURES:
Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs easily without any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Rear Diffuser
$2,145.00
$3,064.00
C3 Carbon Ferrari 458 Carbon Fiber Rear Diffuser
FITS:Â Ferrari 458 Italia
Replace the heavy fiberglass diffuser on the rear on your Ferrari F458 with a lightweight, beautifully crafted Carbon Fiber Rear Diffuser from C3. The hefty, drably painted OEM diffuser belies the Formula 1 roots of the 458, adding unnecessary weight aft of the rear axle. Ferrari offers a carbon replacement for $9,600! C3 makes an autoclaved, pre-impregnated 3k dry carbon fiber replacement for a reasonable price with no compromise in quality, fitment or finish. C3 has perfectly matched the OEM Ferrari 1x1 3K plain carbon fiber weave; both functional and beautiful, this is our most popular upgrade for the 458.
A common complaint among 458 owners about the factory diffuser, which breaks easily, is that it's easy to break in daily driving. The C3 Carbon Fiber diffuser, by comparison, is far more robust. However, should any of the diffuser fins on our piece get scuffed or chipped, they can be easily replaced individually!
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave that matched to factory Ferrari carbon
Weighs 67% (over 10 lbs.) less than the factory Ferrari piece
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit with ground clearance equal to the original factory diffuser
Installs easily in minutes with no modification to your 458
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser
$3,166.00
$4,522.00
C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser
Replace the heavy, fragile fiberglass diffuser on the rear on your Ferrari 488 with a strong, lightweight, beautifully crafted carbon fiber rear diffuser from C3.
The 488's heavy, drab-black factory diffuser belies the car's Formula 1 roots, adding unnecessary weight aft of the rear axles. Naturally, Ferrari offers a carbon fiber replacement -- for over $10,000! C3 Carbon uses an autoclave to create our pre-impregnated (pre-preg) dry carbon fiber 488 diffuser for uncompromising quality, fitment, and finish. All at a fraction of the cost of the Ferrari piece. C3 have perfectly matched the OEM Ferrari 1x1 3K plain carbon fiber weave to make a stunning diffuser that is functional, beautiful, and durable.
A common complaint among 488 drivers is the factory diffuser being easily and irreparably damaged during everyday driving. Not only is the C3 Carbon rear diffuser more robust in this regard, but the fins are individually replaceable should one be scuffed or damaged. Not so with the Ferrari piece.
FITS: 2016+ Ferrari 488 GTB
FEATURES:
Autoclaved pre-preg dry carbon fiber in a 1x1 3K plain weave identical to factory Ferrari carbon fiber
Weighs 67% less than the original fiberglass Ferrari pieceÂ
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit with ground clearance equal to the original factory diffuser
Installs easily in minutes with no modification to your 488
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts
$2,809.00
$4,013.00
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts
Made from aerospace-grade autoclaved dry carbon fiber and matched to the Ferrari factory's signature 1x1 3K plain weave pattern, these side skirts are a perfect match to the stunning carbon fiber on the 458. Ferrari can add them to your 458 build at the factory...for $9,000!
You can easily install them yourself using only hand tools for a fraction of the factory cost, without sacrificing even the smallest bit of fitment, finish, or quality. Unlike many other brands, these are not carbon overlaid on fiberglass. C3 uses only 100% hand-laid pre-preg dry carbon fiber, formed in the autoclave at high pressure and temperature using billet aluminum molds.
These Ferrari carbon fiber side skirts were originally developed using highly innovative fluid dynamics techniques and perfected in the wind tunnel in order to optimize the 458's aerodynamics. The lateral plane on each skirt plays a crucial role in reducing high-speed lift by minimizing air flowing from the side of the car into the underside. C3 Carbon's carbon fiber combines cosmetic appeal with outstanding technical performance, reducing the total weight of the car in the process.
FEATURES:
Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk Package
$2,043.00
$2,919.00
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk
C3's exacting quality, precise fitment, and a premium hand-polished finish come at a far more reasonable price than the factory Ferrari pieces. Precision-formed in an autoclave from the finest aerospace-grade pre-impregnated dry carbon fiber, each C3 piece matches the 1x1, 3K plain weave of OEM Ferrari carbon perfectly. Fit-and-finish are, of course, impeccable for a truly factory appearance.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1, 3K plain weave matched to OEM Ferrari
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Each piece installs in minutes without any modifications
KIT INCLUDES:
Four pre-preg dry carbon trim panels
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Engine Trim
$1,686.00
$2,408.00
C3 Carbon Ferrari 458 Carbon Fiber Engine Trim
FITS:Â Ferrari F458 Italia
Ferrari displays the incredible F458 engine under a glass bonnet, which is the perfect opportunity to surround it with beautiful C3 carbon fiber instead of the factory's dull black plastic. A $7,888 option offered by Ferrari, the C3 Carbon Fiber Engine Cover offers exacting quality, precise fit, and a premium finish at a much more reasonable price. Made from the finest aerospace-grade pre-impregnated (pre-preg) dry autoclaved carbon fiber, C3 matches the 1x1 3K plain weave of factory Ferrari carbon pieces perfectly. Fit and finish are impeccable for a truly factory look.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to factory Ferrari carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit!
KIT INCLUDES:
Two carbon fiber engine bay side panels
One carbon fiber engine bay firewall panel
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Porsche 991.2 GT2 RS Wing End Plates
$1,686.00
$2,408.00
C3 Carbon Porsche GT2 RS Wing End Plates
FITS:Â 991.2 Porsche GT2 RS
C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts.
The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat.
FEATURES:
Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing
Available in gloss or matte/satin clear, or satin black top coat
OEM-perfect fit
Installs in minutes without any modification using original hardware
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Installation Instructions Here
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Porsche GT2 RS Style Wing End Plates for GT3 RS
$1,686.00
$2,408.00
GT2 RS Style Wing End Plates for the GT3 RS
FITS:Â 991.1 &Â 991.2 Porsche GT3 RS
C3 Carbon has created a GT2-Style, 100% dry carbon fiber rear-wing end plates that bolt directly to the factory GT3 RS wing! The OEM GT2 RS end plates use a completely different attachment system (adhesive) than the OEM GT3 RS end plates (bolt-on). But we love the look of the GT2 RS wing ends. So we married the two, giving our customers the look of the GT2 RS on their GT3 RS! The C3 Carbon end plates precisely match the uncompromising look, fitment, and finish of the factory Porsche carbon rear wing. They attach in exactly the same way as the OEM GT3RS end plates; no drilling, modifying, etc. required. Just bolt them up and go.
C3 starts with 3D laser scanning to make an ultra-precise, CNC-machined aluminum billet mould for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts.
The look and finish are truly amazing! The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in either high-gloss or matte/satin automotive urethane clear coat, or satin black automotive coating.
FEATURES:
Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing
Gloss clear, satin clear, or satin black finish available
OEM-perfect fit
Installs in minutes without any modification using original hardware
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Installation Instructions Here
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Porsche 991.2 GT2 RS - GT3 RS Front NACA Ducts
$1,584.00
$2,262.00
C3 Carbon Porsche GT2 RS / GT3 RS Front Brake NACA Ducts
FITS:Â 991.2 Porsche GT2 RS and GT3 RS
C3 Carbon offers this GT2 RS / GT3 RS 100% carbon fiber front NACA brake duct kit, giving you the uncompromising look, fitment, and finish to match your Porsche's factory carbon perfectly. You get replacements for the two NACA ducts on the exterior (top) of your front trunk bonnet and two replacements for the interior ducts on the bottom side. The NACA ducts match the 2x2 carbon weave on your Porsche's factory carbon, finished with either a high-gloss or smooth satin automotive urethane top coat. The interior ducts are matched to the weave and matte finish of the bonnet's underside. All four pieces are pure dry carbon fiber, no overlays.
INCLUDES:
Two NACA ducts (top side of bonnet)
Two interior ducts (bottom side of bonnet)
3M VHB double-sided trim adhesive
FEATURES:
Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon
Clear-coated with durable automotive urethane
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Porsche GT3 RS Carbon Fiber Rear Wing End Plates
$1,686.00
$2,408.00
Carbon Fiber Wing End Plates For Porsche GT3 RS
FITS:Â 991.1 and 991.2 Porsche GT3 RS
C3 Carbon 100% carbon fiber rear-wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. There's no modification, drilling, etc. needed -- the C3 Carbon parts are ready to bolt on.
The look, however, is pure carbon fiber! These really are the pieces Porsche should have put on the GT3 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish.
FEATURES:
Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Easy bolt-on, no modifications required
Installs in minutes without any modification using original hardware
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Installation Instructions Here
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler
$1,686.00
$2,408.00
C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler
Upgrade your F12's rear end with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber rear spoiler from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon rear spoiler is fully functional, installs easily, and dramatically upgrades the look of your F12 Berlinetta!
FITS Ferrari F12 Berlinetta
FEATURES:
Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs easily without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Side Mirrors
$1,379.00
$1,970.00
C3 Carbon Ferrari 458 Carbon Fiber Side Mirrors
Direct replacement for the factory-fitted side mirrors on the Ferrari 458, these beautifully finished two-piece carbon fiber mirror cases from C3 Carbon add drama and style to your 458.
C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber side mirrors are a 1x1, 3K plain weave matching OEM Ferrar carbon precisely. They install easily and fit perfectly for a truly factory appearance, truly evoking the long motorsports heritage of your Ferrari 458.
Kit contains both left and right mirror casings and stalks. You will re-use the mirror lenses from your 458.
FITS: 2010+ Ferrari 458 models
FEATURES:
Includes both upper and lower mirror case for a completely factory appearance
Autoclaved pre-preg dry carbon fiber with 1x1 3k plain weave matched to Ferrari OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Front Intake Winglets
$1,022.00
$1,460.00
C3 Carbon Ferrari 458 Carbon Fiber Front Intake Winglets
C3 Carbon replacements for the stock intake flaps on the nose of the Ferrari F458. The OEM pieces are boring painted fiberglass, perfect for replacement with stunning high-gloss carbon fiber from C3. Crafted using autoclaved, pre-impregnated 3k dry carbon fiber in a 1x1 weave matching OEM Ferrari carbon fiber, these replacement front winglets are things of beauty.
Expertly matched to the identical specs of the OEM pieces, fit and finish are perfect. And with Ferrari's own carbon fiber replacements costing nearly $4,400, you get the OEM carbon look without the Ferrari price tag.
Includes two front intake winglets for the Ferrari 458 Coupe or Spider.
FEATURES:
Autoclaved pre-preg dry carbon fiber in a 1x1 3k plain weave matching OEM Ferrari carbon
Clear-coated using automotive urethane, hand polished to a mirror finish
OEM-level fitment for a perfect replacement with no need for any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at over 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Airbox Cover
$1,527.00
$2,182.00
C3 Carbon Ferrari 458 Carbon Fiber Airbox Cover
FITS:Â 2010+ Ferrari 458 (Coupe and Spider)
Ferrari displays the 458's beautiful V8 engine under a glass bonnet, but the stock black plastic airbox doesn't do it justice. C3's autoclaved, pre-impregnated dry carbon fiber 458 Airbox fits and functions as perfectly as the factory piece and brings the beauty of carbon fiber to your engine bay without the crazy Ferrari price.
C3 matches the OEM Ferrari 1x1 carbon weave for a perfect original Ferrari appearance. Easy installation makes this a must-have for any 458 owner.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
