Closeout Racing Helmets

Stilo ST5 GT ZERO 8860-2018 Carbon Helmet FIA 8860 Certification valid to 2033 for these ST5 GT Zero Carbon Fiber Helmets The Stilo ST5 GT ZERO 8860-2018 Carbon Helmet is one of Stilo's most advanced ST5-generation full-face racing helmets, combining an exceptionally lightweight ZERO carbon fiber shell with FIA 8860-2018 protection, integrated accessory ports, excellent visibility, and a design developed specifically for serious closed-cockpit competition. Built for professional racers and drivers who refuse to compromise on helmet weight or protection, the ST5 GT ZERO delivers the premium construction, comfort, and equipment integration that made the ST5 platform a favorite in GT, endurance, touring-car, and sports-car racing. FIA 8860-2018 Advanced Helmet Protection The ST5 GT ZERO is homologated to the FIA 8860-2018 advanced helmet standard. This high-level motorsport specification places demanding requirements on impact protection, shell strength, energy absorption, and penetration resistance. For racers competing in high-speed professional motorsport, FIA 8860-2018 construction provides a significant step above conventional club-level helmet specifications. Stilo ZERO Carbon Fiber Construction The defining feature of the ST5 GT ZERO is its extremely lightweight ZERO carbon fiber shell. Stilo developed the ZERO construction for racers looking to reduce helmet mass as much as possible while retaining FIA 8860-level protection. Lower helmet weight can reduce strain on the driver's head and neck during heavy braking, high lateral loads, long endurance stints, and extended race sessions. ST5 GT ZERO Helmet Weight Small shell: approximately 2.5 lbs. (1130 g) up to size 59 with intercom Large shell: approximately 2.7 lbs. (1230 g) up to size 64 with intercom These exceptionally low weights make the ST5 GT ZERO a premium option for racers who place a high priority on reducing helmet mass. Purpose-Built for Closed-Cockpit Racing The GT configuration is designed around the needs of drivers competing inside closed-cockpit race cars. Its aerodynamic shell, integrated accessory ports, ventilation capability, communication compatibility, and excellent eyeport visibility make it particularly well suited to GT, endurance, touring-car, prototype, and sports-car racing. Dual Integrated Side Ports One of the ST5 GT's most distinctive features is its pair of integrated side ports. Instead of attaching large external fittings to the helmet, Stilo incorporates the accessory connection points directly into the shell design. The side ports can be configured for several types of driver equipment, allowing the helmet to be tailored to the car and racing application. Side Port Accessory Options Integrated communication electronics Forced-air helmet systems Driver hydration systems Helmet Eject system integration Radio and communication connections When an accessory is not installed, the ports remain discreet and integrated into the helmet profile. GT vs. Naked ST5 ZERO The ST5 GT ZERO includes Stilo's multifunction side ports for electronics, air, hydration, and other accessories. The ST5 N ZERO, often referred to as the Naked version, removes the side-port system for drivers who prefer the cleanest and simplest possible shell configuration. Larger Eyeport for Improved Visibility The ST5 platform features a taller and lower eyeport than previous-generation Stilo helmets, providing improved visibility without sacrificing the coverage expected from a professional full-face racing helmet. The increased viewing area helps drivers see more of the cockpit, mirrors, gauges, apexes, surrounding traffic, and track environment. Center Pinch-Clip Visor Latch The ST5 visor uses Stilo's convenient center pinch-clip locking system. The centrally positioned latch is designed to make visor opening and closing easier, even while the driver is wearing racing gloves. This placement also allows the visor to be operated naturally with either hand. ST5 Visor Compatibility The ST5 GT ZERO uses the standard Stilo ST5 visor family, giving racers access to a wide variety of shield options for different lighting and weather conditions. Available ST5 shield options include clear, smoked, mirrored, colored, and other specialty configurations. Eight Top Ventilation Openings The ST5 GT ZERO includes eight top ventilation openings designed to help move cooling air through the helmet and reduce heat buildup during demanding sessions. These openings can also be used with compatible Stilo ST5 Top Air systems when forced-air cooling is desired. Forced-Air System Compatible For hot closed-cockpit cars, the ST5 GT ZERO can be configured with a compatible forced-air system. The helmet's integrated design allows air-system hardware to be added without turning the helmet into a bulky collection of external fittings. This makes the GT ZERO especially attractive for endurance racers and drivers competing in high-temperature cockpits. Integrated Communication Capability The ST5 GT platform was designed to accommodate professional racing communications. Compatible microphones, speakers, earbuds, radio connections, and other electronics can be integrated into the helmet depending on the driver's communication system. This approach helps keep wiring organized while maintaining the comfort and fit of the interior. Hydration System Compatible The ST5 GT ZERO can also accommodate a compatible driver drinking system through its integrated accessory architecture. For endurance racing and long sessions, hydration-system integration allows the driver to drink without removing safety equipment or relying on awkward external routing. Eject System Compatible The helmet can be configured for use with a compatible Eject helmet-removal system, providing teams and safety crews with another option when preparing the driver's complete safety package. Factory HANS Anchors Included The ST5 GT ZERO includes HANS/FHR post anchors, allowing the helmet to be used with compatible Head and Neck Restraint systems. Having the anchors installed as part of the helmet package simplifies race preparation and ensures the helmet is ready for the restraint equipment commonly required in professional motorsport. Contoured ST5 Cheek Pads The ST5 interior uses redesigned, contoured cheek pads developed to improve comfort and helmet stability. A proper racing helmet should remain firmly positioned on the head during braking, cornering, vibration, and aerodynamic loading without creating excessive localized pressure. Stilo ST5 GT ZERO Features FIA 8860-2018 homologation Certification valid through 2033 for these specific helmets Ultra-lightweight ZERO carbon fiber shell Approximately 1130 g small-shell weight with intercom Approximately 1230 g large-shell weight with intercom Designed for professional closed-cockpit racing Dual integrated multifunction side ports Communication-system compatible Forced-air system compatible Hydration-system compatible Eject system compatible Taller and lower eyeport for improved visibility Center pinch-clip visor latch Compatible with standard Stilo ST5 shields Eight top ventilation openings Compatible with Stilo ST5 Top Air systems Contoured comfort cheek pads Factory HANS/FHR anchors included Helmet bag designed to accommodate helmet and HNR included Why Choose the ST5 GT ZERO? The ST5 GT ZERO is built for the racer who wants the integrated functionality of the ST5 GT platform without giving up the weight advantage of Stilo's ZERO carbon construction. Its combination of FIA 8860-2018 protection, low shell weight, integrated communication and cooling options, excellent visibility, and HANS compatibility makes it especially well suited to demanding GT and endurance applications. Getting the Correct Stilo Fit A properly fitted racing helmet should feel snug and secure around the entire head with even pressure and no concentrated painful areas. Measure around the widest part of the head using a flexible measuring tape, approximately one inch above the eyebrows and around the rear of the skull. Take two or three measurements and use the largest consistent measurement when selecting a helmet size. Drivers moving from another helmet brand should select their Stilo size according to actual head circumference rather than assuming the same numerical size will fit identically. Stilo Size 59 Fit Note We have found that customers who normally wear a size 59 in other helmet brands are often more comfortable in a Stilo size 60, which moves the driver into the larger shell. Please measure carefully and order accordingly. Stilo ST5 GT ZERO Carbon Fiber Helmet Sizing Chart Questions & Answers What certification does the Stilo ST5 GT ZERO have?The ST5 GT ZERO is homologated to the FIA 8860-2018 advanced helmet standard. The certification on these specific helmets is valid through 2033. What makes the ZERO version different?The ZERO uses Stilo's lightweight premium carbon construction to minimize helmet weight while retaining FIA 8860-2018 protection. How much does the ST5 GT ZERO weigh?The small shell weighs approximately 1130 g, or 2.5 lbs., with intercom equipment, while the large shell weighs approximately 1230 g, or 2.7 lbs., with intercom equipment. What are the side ports used for?The two integrated side ports can support compatible electronics, forced-air equipment, hydration systems, and helmet-removal equipment depending on the driver's configuration. What is the difference between the ST5 GT ZERO and ST5 N ZERO?The GT ZERO includes Stilo's multifunction side ports. The N ZERO is the Naked version and eliminates the side-port system for a simpler shell configuration. Can I install a radio or communication system?Yes. The ST5 GT is designed to accommodate several compatible professional communication configurations. Can I connect a forced-air system?Yes. The helmet's ventilation openings and accessory architecture allow compatible Stilo forced-air components to be installed. Can I use a drinking system?Yes. Compatible hydration equipment can be integrated into the ST5 GT ZERO. Does the helmet include HANS anchors?Yes. HANS/FHR post anchors are included. What shields fit the ST5 GT ZERO?The helmet uses the standard Stilo ST5 shield family, giving drivers several clear, tinted, mirrored, and specialty visor options. How many top vents does the helmet have?The ST5 GT ZERO has eight top ventilation openings, which can also be used with compatible Stilo Top Air equipment. Why might I need a Stilo size 60 if I normally wear a 59?Fit varies between helmet manufacturers. Based on customer fitting experience, many drivers who typically wear a size 59 in other brands are more comfortable in a Stilo size 60. Does a helmet bag come with the ST5 GT ZERO?Yes. A Stilo helmet bag designed to accommodate the helmet and HNR is included. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.    

Stilo Helmets ST5 FN ZERO 8860-2018 ABP Carbon Helmet FIA 8860 certification valid through 2032 for these ST5 FN ZERO ABP carbon fiber helmets. The Stilo Naked Helmet With Zero Compromises The Stilo ST5 FN ZERO 8860-2018 ABP Carbon Fiber Helmet is built for professional racers who demand elite protection, extremely low weight, and a clean Formula Naked shell design. Designed for top-level open-wheel racing, the helmet meets FIA 8860-2018 ABP requirements with additional protection around the forehead and front chin bar areas. The ZERO version sits at the top of Stilo’s lightweight ST5 lineup, using high-tensile carbon fiber construction to reduce driver fatigue while maintaining the protection required for professional competition. Ultra-Light Carbon Construction for Serious Racers The Stilo ST5 FN ZERO 8860-2018 ABP is designed for racing environments where every ounce matters. The FN, or Formula Naked, layout features a streamlined aerodynamic shell developed specifically for open-cockpit racing. The helmet is also ready for non-integrated electronics, air supply, hydration systems, or a combination of the three, while removable cheek pads and top pads allow drivers to fine-tune the interior fit. Advanced Ballistic Protection The ABP, or Advanced Ballistic Protection, design adds increased protection to the forehead and front section of the helmet. This additional reinforcement requires a smaller visor opening compared with the standard ST5 helmet line. Removable earmuff cushions help isolate the driver's ears from surrounding noise, while pre-installed HANS posts make the helmet ready for professional competition. Stilo ST5 FN ZERO 8860-2018 Sizing Chart We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5 FN ZERO 8860-2018 ABP Carbon Helmet Details FIA 8860-2018 ABP certified High-tensile carbon fiber construction Designed for top-level open-wheel and open-cockpit racing Enhanced ABP protection around the forehead and front chin bar areas Smaller visor opening than the standard ST5 line due to additional ABP protection Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL Removable cheek pads and top pads for improved fit adjustment Removable earmuff cushions help isolate the ear and reduce cockpit noise Two shell sizes help provide a closer fit while reducing unnecessary weight Ready for non-integrated electronics, air supply, hydration systems, or a combination of the three Compatible with additional aero components, top-air kits, and visor options Stilo ZERO shells are designed for top-level racing where every ounce matters Stilo Helmets ST5 FN ZERO 8860-2018 ABP FAQs What makes the Stilo ST5 FN ZERO 8860-2018 ABP different from the standard ST5 FN 8860 helmet?The ZERO ABP version combines Stilo’s lightweight carbon construction with additional protection around the forehead and front chin bar areas. This enhanced Advanced Ballistic Protection is designed specifically for top-level open-wheel racing applications. What does FN mean on the Stilo ST5 FN ZERO?FN stands for Formula Naked. This version does not include the built-in side accessory ports found on GT models, giving the helmet a cleaner, aerodynamic shell layout optimized for open-cockpit and formula-style applications. Does the Stilo ST5 FN ZERO 8860-2018 ABP have a larger eyeport?No. Because the ABP version includes additional protection around the forehead and front section of the helmet, it uses a smaller visor opening compared with the standard ST5 helmet line. Can communications, top air, or a hydration system be added?Yes. The helmet is ready for non-integrated electronics, air supply, hydration systems, or a combination of the three. Additional top-air kits and other accessories are also available separately. Does the Stilo ST5 FN ZERO include HANS anchors?Yes. The helmet includes standard HANS post anchors for use with compatible head and neck restraint systems. Are shields interchangeable across the Stilo ST5 range?The ABP version uses a smaller visor than the standard ST5 line because of its additional frontal protection. Be sure to use visor options specifically compatible with the ST5 FN ZERO ABP helmet. For other Stilo ST5 helmet configurations, please see our full selection of Stilo racing helmets and accessories. This helmet will require a signature for delivery.

Stilo Helmets ST5 FN ZERO 8860-2018 Carbon Helmet FIA 8860 certification valid through 2032 for these ST5 FN ZERO carbon fiber helmets. The Stilo Naked Helmet With Zero Compromises The Stilo Helmets ST5 FN ZERO 8860-2018 Carbon Helmet is built for professional racers who demand elite protection, extremely low weight, and a clean Formula Naked shell design. Engineered to meet the strict FIA 8860-2018 standard, this helmet is designed for top-level motorsport applications where safety, visibility, and weight reduction all matter. The ZERO version sits at the top of Stilo’s lightweight ST5 lineup, using an advanced carbon fiber construction to reduce driver fatigue while maintaining the protection expected from an FIA 8860-certified racing helmet. For drivers looking for a serious competition helmet without unnecessary bulk, the ST5 FN ZERO delivers exactly that. Ultra-Light Carbon Construction for Serious Racers The Stilo ST5 FN ZERO 8860-2018 is designed to be one of the lightest carbon fiber racing helmets in the ST5 range. The FN, or Formula Naked, layout removes the integrated side ports found on the Stilo ST5 GT ZERO 8860-2018 Carbon Helmet, giving it a cleaner, more streamlined shell while still allowing compatibility with select electronics, top forced air, and helmet eject system setups. Stilo’s integrated mounting and routing design helps keep add-on systems tidy and low-profile. When those accessories are not installed, the helmet retains a smooth, uncluttered shape with nothing protruding or hanging into the cockpit. Increased Visibility Is Increased Safety The Stilo ST5 FN ZERO 8860-2018 features a taller, lower-positioned eyeport designed to improve outward visibility without compromising protection. That expanded field of view is especially valuable in fast-paced race environments where better sightlines can help the driver stay more aware of traffic, apexes, and track conditions. Each ST5 visor uses a center pinch-clip design that makes opening and closing the shield easier, even while wearing Nomex racing gloves. Stilo Helmets ST5 FN ZERO 8860-2018 Sizing Chart  Stilo ST5 FN ZERO Carbon Helmet Details FIA 8860-2018 certified Small shell weight: 2.58 lbs up to size L (59) with communications Large shell weight: 3.15 lbs up to size 3XL (64) with communications Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL Stilo ST5 shields are interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Redesigned cheek pads are more contoured and comfortable than previous designs Stilo ZERO shells are among the lightest FIA 8860-2018 helmets available Stilo Helmets ST5 FN ZERO 8860-2018 FAQs What makes the Stilo ST5 FN ZERO 8860-2018 different from the standard ST5 FN 8860 helmet?The ZERO version is built around Stilo’s lightest carbon shell construction, making it the premium choice for racers who want FIA 8860-2018 protection with the lowest possible helmet weight. What does FN mean on the Stilo ST5 FN ZERO?FN stands for Formula Naked. This version does not include the built-in side accessory ports found on GT models, giving the helmet a cleaner shell layout optimized for open-cockpit and formula-style applications. Does the Stilo ST5 FN ZERO 8860-2018 have a larger eyeport?Yes. The ST5 FN ZERO uses a taller, lower-positioned eyeport designed to improve driver visibility while maintaining its high-level safety certification. Can communications, top air, or a helmet eject system be added?Yes. Even though the FN version does not use GT-style side ports, it can still be configured with select communications equipment, top forced-air systems, and a helmet eject system. Does the Stilo ST5 FN ZERO include HANS anchors?Yes. The helmet includes standard HANS post anchors for use with compatible head and neck restraint systems. Are shields interchangeable across the Stilo ST5 range?Yes. Stilo ST5 shields are interchangeable across all ST5 helmets, making it easy to use compatible clear, tinted, or mirrored visor options sold separately. For the GT version of this helmet with integrated side ports, please see the Stilo ST5 GT ZERO 8860-2018 Carbon Fiber Helmet. This helmet will require a signature for delivery.

Stilo Helmets ST5 GT 8860-2018 Carbon Fiber Racing Helmet FIA 8860 Certification valid thru 2032 for these ST5 GT 8860 Carbon Fiber Helmets The Stilo ST5 GT 8860-2018 Carbon Fiber Racing Helmet is one of Stilo's most iconic and versatile closed-face racing helmets. Crafted from a carbon fiber layup and certified to the demanding FIA 8860-2018 standard, the ST5 GT is designed for drivers competing across a wide range of professional and high-level motorsports. Building on the successful ST4 helmet platform, the ST5 GT introduces a larger eyeport, improved interior fit system, integrated accessory ports, and extensive compatibility with communications, hydration, and forced-air systems. Lightweight Carbon Fiber Construction The Stilo ST5 GT uses a lightweight carbon fiber shell designed to provide exceptional protection while reducing unnecessary weight on the driver's head and neck. Small shell weight: approximately 3.13 lbs Large shell weight: approximately 3.39 lbs Two dedicated shell sizes for improved fit and reduced weight Using separate small and large shell configurations allows Stilo to create a more proportional helmet rather than relying on excessive interior padding to accommodate different head sizes. FIA 8860-2018 Certified Protection The ST5 GT Carbon is FIA 8860-2018 certified, making it suitable for a wide variety of high-level motorsport applications where advanced FIA helmet certification is required. The FIA 8860 standard is designed for professional competition and represents one of the most demanding helmet standards used in motorsports. Integrated Side Accessory Ports One of the defining features of the Stilo ST5 GT is the integrated side-port system located on both sides of the helmet. These ports allow drivers to configure the helmet around their specific racing requirements while keeping accessories neatly integrated into the helmet. Compatible systems and accessories include: Integrated communication systems Forced-air systems Hydration and drink systems Combined communications, air, and hydration configurations Stilo designed these systems to integrate seamlessly with the ST5 platform, making the ST5 GT one of the most customizable racing helmets available. Larger Eyeport and 3mm Anti-Fog Visor Compared with the earlier ST4 helmet platform, the ST5 features a larger eyeport designed to open beyond the driver's normal line of sight for improved visibility inside the cockpit. The helmet comes standard with a 3mm clear visor featuring Stilo's anti-fog coating. A variety of additional visor options are also available separately, allowing drivers to configure the helmet for different lighting and racing conditions. Removable Interior Padding Stilo improved the ST5 interior with removable cheek pads and removable top padding, allowing drivers to fine-tune the fit of the helmet. The helmet also comes standard with removable earmuff cushions designed to isolate the ears and create a significantly quieter environment inside the helmet. This is particularly beneficial for drivers using integrated communications or competing in loud closed-cockpit race cars. Designed for Communications, Air and Hydration The ST5 GT is designed from the outset to accommodate multiple driver-support systems without requiring a collection of externally mounted components. The helmet can be configured for: Integrated electronics Driver communications Air supply Hydration systems Multiple systems used together This versatility makes the ST5 GT particularly well suited to GT racing, endurance racing, touring cars, and other closed-cockpit motorsports. Stilo ST5 GT 8860-2018 Carbon Helmet Features FIA 8860-2018 certified Carbon fiber shell construction Approximately 3.13 lbs in the small shell Approximately 3.39 lbs in the large shell Two separate shell sizes for improved fit and reduced weight Integrated side accessory ports Ready for integrated electronic communication systems Compatible with forced-air systems Compatible with hydration and drink systems Communications, air, and hydration systems can be combined Larger eyeport compared with the ST4 platform 3mm clear visor included Anti-fog visor coating Removable cheek pads Removable top padding Removable earmuff cushions for improved noise isolation HANS posts included Additional aero accessories available Top-air kits available separately Multiple visor options available separately Built for Professional Motorsport The Stilo ST5 GT Carbon combines advanced FIA protection with lightweight carbon construction and one of the most adaptable accessory systems available in a racing helmet. Its combination of integrated communications capability, forced-air compatibility, hydration support, improved visibility, customizable interior padding, and FIA 8860-2018 certification makes it an excellent choice for drivers who need a professional-level helmet that can be configured around their race car and competition environment. Stilo ST5 GT 8860-2018 Carbon Fiber Helmet Sizing Chart For the most accurate fit, measure around the largest part of your head approximately one inch above your eyebrows and around the widest point at the back of your head. Take the measurement several times and use the largest result when selecting your helmet size. View our Auto Racing Helmet Buyer's Guide for additional helmet sizing and fit information. Stilo ST5 GT 8860-2018 FAQs What certification does the Stilo ST5 GT Carbon have?The Stilo ST5 GT Carbon is FIA 8860-2018 certified. How much does the Stilo ST5 GT Carbon weigh?The small shell weighs approximately 3.13 lbs, while the large shell weighs approximately 3.39 lbs. Is the Stilo ST5 GT made from carbon fiber?Yes. The helmet is constructed using a carbon fiber layup designed to provide high-level protection while minimizing helmet weight. Does the Stilo ST5 GT include a visor?Yes. It comes standard with a 3mm clear visor featuring an anti-fog coating. Can communications be installed in the ST5 GT?Yes. The integrated side ports are designed to accommodate compatible Stilo electronic communication systems. Can the ST5 GT use a forced-air system?Yes. The helmet is designed to accept compatible air-supply systems and optional top-air kits. Can I use a hydration system with the ST5 GT?Yes. Compatible drink and hydration systems can be integrated into the helmet. Can communications, air, and hydration be used together?Yes. The ST5 GT is designed so integrated electronics, air supply, and hydration systems can be used individually or in combination. Are the interior pads removable?Yes. The cheek pads and top pads are removable, allowing drivers to better customize the helmet fit. Does the ST5 GT include HANS posts?Yes. HANS posts are included with the helmet.    

Stilo ST5 FN 8860-2018 ABP Carbon Fiber Racing Helmet FIA 8860 Certification valid thru 2033 for these ST5 FN 8860 ABP Helmet The Stilo ST5 FN 8860-2018 ABP Carbon Fiber Racing Helmet is engineered for professional drivers who demand one of the highest levels of helmet protection available in motorsports. Designed around the stringent FIA 8860-2018 ABP standard, the ST5 FN ABP combines an extremely lightweight carbon-fiber shell with Advanced Ballistic Protection developed for top-level open-wheel, prototype, endurance, and professional racing. The FN designation stands for Stilo's Formula Naked configuration. Unlike the ST5 GT, the FN eliminates the external integrated side ports to reduce weight and create an exceptionally clean aerodynamic profile. The helmet can still be configured for communications, forced air, hydration, and helmet eject systems through Stilo's purpose-built accessory system. For drivers competing at the highest levels of motorsport—or racers who simply refuse to compromise on protection—the ST5 FN 8860-2018 ABP delivers exceptional safety, low weight, comfort, and professional-grade functionality. FIA 8860-2018 ABP Advanced Ballistic Protection ABP stands for Advanced Ballistic Protection. FIA developed the ABP specification to provide increased protection to the frontal area of the helmet, particularly around the forehead and visor opening. The ABP design incorporates additional protection directly into the helmet structure instead of relying on the separate Zylon visor panel used with previous-generation FIA 8860-2010 Formula 1 helmets. The FIA 8860-2018 ABP testing procedure includes demanding impact and projectile testing intended for motorsports where drivers may be exposed to debris and other high-energy impacts. The result is an exceptionally protective helmet designed for the highest levels of professional competition. Lightweight Carbon Fiber Construction The Stilo ST5 FN 8860-2018 ABP is constructed from 100% medium-tensile carbon fiber, providing an outstanding combination of strength, rigidity, impact performance, and low weight. Reducing helmet weight is especially important in open-wheel and high-downforce race cars, where sustained lateral G-forces can place significant loads on the driver's head and neck. The lightweight construction of the ST5 FN helps reduce fatigue during long sessions without sacrificing the protection required by the FIA 8860-2018 ABP standard. Designed for Open-Cockpit and Professional Racing The ST5 FN ABP is particularly well suited for open-wheel and open-cockpit racing where the driver's helmet is more exposed to airflow, debris, and other environmental factors. The ABP configuration uses a reduced-height eyeport and specialized visor to increase protection around the forehead area. Combined with the aerodynamic ST5 shell, the helmet provides a compact and streamlined profile for high-speed racing. Formula Naked FN Design The FN or Formula Naked configuration removes the external side accessory ports found on the Stilo ST5 GT. Eliminating these ports reduces weight and creates a smooth exterior shell ideally suited to Formula, prototype, and open-wheel applications. Despite the clean exterior, the ST5 FN remains compatible with a wide range of Stilo accessories and can be configured for driver communications, hydration, top forced air, and helmet eject systems. Integrated Accessory Capability The ST5 FN was designed so important racing accessories can be added without creating unnecessary cables, hoses, or components hanging around the driver's helmet. Compatible with Stilo FN communication systems Compatible with Stilo top forced-air systems Compatible with helmet eject systems Compatible with hydration systems Available aero accessories for open-cockpit applications Compatible with Stilo ABP-specific visors Communications, forced-air components, hydration equipment, and other optional accessories are sold separately unless specifically included with the selected configuration. Factory-Installed HANS Posts The Stilo ST5 FN 8860-2018 ABP comes with factory-installed HANS posts, making it ready for use with compatible head-and-neck restraint systems. Factory installation provides a clean, properly positioned attachment solution without requiring the racer to install restraint anchors separately. ST5 ABP Visor System The ABP helmet uses a specialized reduced-height eyeport and visor designed specifically around the Advanced Ballistic Protection requirements. Stilo's center visor locking system allows the shield to be opened and closed easily, even while wearing racing gloves. Tear-off posts allow the helmet to be configured for racing environments where debris and contamination can quickly affect visibility. Important: Because of the different eyeport design, always verify that replacement shields and accessories are specifically compatible with the ST5 ABP helmet. Improved Interior Comfort Stilo redesigned the ST5 interior with more contoured cheek pads and padding designed to improve comfort and helmet stability. Removable earmuff cushions help isolate the driver's ears from surrounding noise, creating a quieter environment and providing dedicated space for compatible communications equipment. Eight-Point Top Ventilation Eight ventilation openings across the top of the helmet help manage airflow and can also be used with the optional Stilo ST5 Top Air System. A forced-air system can be especially valuable in endurance racing, enclosed cockpits, and hot-weather competition where maintaining driver comfort and concentration becomes increasingly important. Stilo ST5 FN 8860-2018 ABP Features FIA 8860-2018 ABP certified Advanced Ballistic Protection 100% medium-tensile carbon-fiber construction Ultra-lightweight FN Formula Naked design Designed for open-wheel, prototype, endurance, and professional racing Reduced-height ABP eyeport for increased frontal protection Clear ABP visor included Tear-off compatible visor system Center visor locking mechanism Factory-installed HANS posts Eight top ventilation openings Compatible with Stilo top forced-air systems Compatible with FN communication systems Compatible with hydration systems Compatible with helmet eject systems Contoured cheek pads Removable earmuff cushions Nomex interior Double D-ring chin strap Two-shell construction for optimized fit and weight Stilo ST5 FN 8860-2018 ABP Helmet Sizing Chart Stilo ST5 full-face helmets use two different shell sizes to provide a better-fitting helmet without adding unnecessary padding and weight. Competition Motorsport Fit Note: We have found that customers who normally wear a size 59 in some other helmet brands are often more comfortable moving to a Stilo size 60. Stilo helmets tend to fit slightly snugger than many competing brands, so accurate measurement is important. How to Measure for a Stilo Helmet Use a flexible cloth measuring tape and measure around the widest part of your head. Position the tape approximately one inch above your eyebrows, run it above your ears, and continue around the widest portion at the back of your head. Take the measurement two or three times and use the largest number. A properly fitted racing helmet should fit firmly and evenly around your head without creating painful pressure points. View the Competition Motorsport Auto Racing Helmet Buyer's Guide Stilo ST5 FN 8860-2018 ABP FAQs Q: What does ABP mean on a Stilo helmet?A: ABP stands for Advanced Ballistic Protection. It is part of the FIA 8860-2018 ABP specification and provides increased protection around the frontal portion of the helmet and eyeport. Q: What certification does the Stilo ST5 FN ABP have?A: This helmet is certified to the FIA 8860-2018 ABP advanced helmet standard. Q: Is the ST5 FN ABP Snell certified?A: No. This helmet's primary certification is FIA 8860-2018 ABP. It should not be confused with the Snell SA2020 versions of the ST5. Q: What does FN mean?A: FN stands for Formula Naked. The FN configuration eliminates the external side accessory ports found on the ST5 GT to minimize weight and provide a clean aerodynamic shell. Q: Is the ST5 FN ABP designed for open-wheel racing?A: Yes. The helmet is particularly well suited for open-wheel, prototype, Formula, and other open-cockpit racing applications where advanced protection and low weight are priorities. Q: Does the helmet include HANS posts?A: Yes. Factory-installed HANS posts are included. Q: Can communications be installed in the FN helmet?A: Yes. The helmet can be equipped with compatible Stilo FN communication systems even though it does not have the external integrated side ports found on the ST5 GT. Q: Can I add a forced-air system?A: Yes. The eight top ventilation openings allow the helmet to be configured with a compatible Stilo ST5 top forced-air system. Q: Can I use a regular ST5 visor on the ABP helmet?A: The ABP helmet uses a specialized eyeport and visor configuration. Replacement shields should always be confirmed as compatible with the ST5 ABP helmet before ordering. Q: How many shell sizes does the ST5 use?A: The ST5 full-face platform uses two shell sizes. Sizes 54 through 59 use the small shell, while sizes 60 through 64 use the large shell. Q: Does Stilo run small?A: Stilo helmets generally fit slightly snugger than many other helmet brands. Accurate head measurement is recommended before ordering. Professional-Level Protection Without Compromise The Stilo ST5 FN 8860-2018 ABP is built for racers who demand exceptional protection without unnecessary weight. Its carbon-fiber shell, Advanced Ballistic Protection, Formula Naked aerodynamic design, factory-installed HANS posts, and extensive accessory compatibility make it a serious choice for professional-level competition. Whether you're racing an open-wheel car, prototype, high-downforce machine, or another application requiring FIA 8860-2018 ABP certification, the ST5 FN delivers the protection, lightweight construction, and functionality expected from one of Stilo's premier racing helmets. This helmet will ship with signature required for delivery.    

Stilo Helmets ST5 FN 8860-2018 FIA 8860 certification valid to 2034 on these ST5 FN 8860 carbon fiber helmets. The Stilo Helmet ST5 FN 8860-2018 is a premium carbon fiber racing helmet built for professional drivers who need FIA 8860-2018 homologation and refuse to compromise on safety, weight, or visibility. Designed around Stilo’s Formula Naked platform, this helmet delivers elite-level protection in an exceptionally lightweight full-face design made for serious competition. Professional-Level Carbon Helmet Protection The Stilo ST5 FN 8860-2018 is engineered for drivers who want one of the lightest FIA 8860-2018 full-face racing helmets available. The FN, or Formula Naked, design removes the integrated side accessory ports found on the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, helping reduce weight while maintaining compatibility with select Stilo communication systems, top forced-air accessories, and helmet eject systems. Its 100% medium-tensile carbon shell keeps mass low, while the aerodynamic ST5 profile, wide eye port, and refined interior comfort make it a strong choice for formula cars, open-cockpit racing, and other high-level motorsport applications where every ounce matters. Stilo Helmets ST5 FN 8860-2018 Sizing Chart Stilo Helmets ST5 FN 8860-2018 Features FIA 8860-2018 certified carbon fiber racing helmet Includes Stilo HANS posts Competition Motorsport Stilo Owner's Kit sold separately Formula Naked FN design removes integrated side ports for reduced weight Compatible with select electronics, top forced-air systems, and helmet eject systems 100% medium-tensile carbon construction Stilo ST5 shields are interchangeable across ST5 helmet models Supplied with a 3mm clear visor Eight top ventilation holes Re-designed cheek pads for improved contouring and comfort Sizing available from 54 cm through 64 cm Two-shell construction helps improve fit and reduce unnecessary bulk Stilo Helmets ST5 FN 8860-2018 Weight Small shell: 1200 g / 2.4 lb Large shell: 1320 g / 2.7 lb Stilo Helmets ST5 FN 8860-2018 FAQs What does FIA 8860-2018 certification mean on the Stilo ST5 FN?FIA 8860-2018 is an advanced professional motorsport helmet standard designed for the highest levels of racing. It requires more stringent impact and penetration performance than standard entry-level helmet certifications. What is the difference between the Stilo ST5 FN 8860-2018 and the ST5 GT 8860-2018?The ST5 FN uses Stilo’s Formula Naked layout, which removes the built-in side accessory ports found on the GT version. This helps reduce weight and gives the FN a cleaner, more streamlined configuration for drivers who do not need the GT’s integrated side-port setup. Does the Stilo ST5 FN 8860-2018 include a visor?Yes. The helmet is supplied with a 3mm clear visor, and additional ST5-compatible visor options are available separately for different lighting conditions. Can the Stilo ST5 FN 8860-2018 be used with HANS or FHR devices?Yes. The helmet includes Stilo HANS posts and is designed for use with head and neck restraint systems required in many forms of competitive racing. Can electronics, forced air, or an eject system be added to this helmet?Yes. While the FN does not have the integrated side ports of the ST5 GT, it can still be configured with select communications equipment, top forced-air components, and a helmet eject system. Who is the Stilo ST5 FN 8860-2018 best suited for?This helmet is ideal for professional and serious amateur racers who need FIA 8860-2018 certification, want an ultra-light carbon full-face helmet, and prioritize premium protection with a clean Formula-style layout. If you want the absolute lightest FIA 8860-2018 helmet in Stilo’s lineup, take a look at the Stilo Helmets ST5 FN ZERO 8860-2018 ABP Carbon Helmet.  

Stilo ST5.1 GT Carbon Fiber Racing Helmet – Snell SA2020 / FIA 8859-2015 Huge savings on our remaining inventory of the iconic Stilo ST5.1 GT Carbon Fiber Racing Helmet! Experience professional racing helmet technology at an exceptional closeout value while remaining supplies last. The Stilo ST5.1 GT Carbon Fiber Racing Helmet combines lightweight carbon fiber construction, outstanding visibility, and innovative modular design in one of Stilo's most recognized motorsport helmets. Developed for competitive drivers who demand superior comfort, integrated accessory compatibility, and professional protection, the ST5.1 GT Carbon remains an excellent choice for serious track enthusiasts and racers. Manufactured in Italy using advanced autoclave-molded carbon fiber construction, the ST5.1 GT Carbon provides exceptional strength-to-weight performance while reducing unnecessary helmet mass. Its refined aerodynamic profile, expanded eyeport, and premium noise-attenuating interior deliver the comfort and visibility needed during demanding track sessions. Certified to Snell SA2020 and FIA 8859-2015, the ST5.1 GT Carbon features integrated side ports for optional communications, forced-air cooling, and hydration systems. A clear 3mm anti-fog shield, removable comfort padding, and pre-installed M6 threaded inserts for compatible head and neck restraint anchors complete this versatile racing helmet. Stilo ST5.1 GT Carbon Helmet Key Features Snell SA2020 and FIA 8859-2015 Certified: Meets established motorsport helmet safety standards for qualifying competition and track applications. Autoclave-Molded Carbon Fiber Shell: Lightweight carbon construction engineered for strength, impact protection, and driver comfort. Lightweight Racing Design: Approximately 2.99 lbs in the small shell and 3.32 lbs in the large shell, depending on configuration. Enlarged Eyeport: Improved visibility compared with previous Stilo ST4 helmet designs. Integrated Side Accessory Ports: Accommodates compatible communication, forced-air cooling, and hydration accessories. Clear 3mm Anti-Fog Shield: Factory-supplied shield designed to maintain clear visibility during demanding racing conditions. Multi-Function Shield Lock: Center-mounted locking system designed for convenient operation while wearing racing gloves. Noise-Attenuating Ear Cups: Removable earmuff cushions help reduce unwanted cockpit noise. Removable Comfort Padding: Replaceable cheek and crown padding provides fit customization and easier maintenance. Pre-Installed M6 Threaded Inserts: Ready for installation of compatible FHR/HANS anchor hardware, sold separately. Two Shell Sizes: Optimized shell construction helps provide a more compact fit and reduced unnecessary weight. ST5 Accessory Compatibility: Compatible with selected Stilo ST5 shields, aerodynamic accessories, air kits, and communication systems. Made in Italy: Manufactured and assembled using Stilo's professional motorsport construction techniques. Lightweight Autoclave-Molded Carbon Fiber Construction The Stilo ST5.1 GT Carbon uses advanced carbon fiber construction developed to deliver professional-grade strength while minimizing helmet weight. Its autoclave-molded shell offers an excellent balance of structural integrity, impact performance, and lightweight comfort. Reducing the weight supported by the driver's head and neck can improve comfort during extended driving sessions, particularly under repeated cornering, braking, and acceleration forces. Stilo developed the ST5 GT Carbon with two shell sizes, allowing smaller helmet sizes to use a more compact shell rather than unnecessary padding inside an oversized design. The natural carbon fiber finish showcases the helmet's premium construction while maintaining a distinctive professional racing appearance. Expanded Eyeport for Superior Racing Visibility The Stilo ST5.1 GT Carbon features an enlarged eyeport designed to improve visibility compared with the previous ST4 helmet generation. The taller opening provides additional peripheral and downward vision, helping drivers remain aware of mirrors, surrounding traffic, corner workers, and cockpit controls. The generous eyeport design can also be beneficial for drivers who wear prescription glasses, subject to individual fit. Combined with the clear 3mm shield, the ST5.1 GT Carbon is designed to provide clear sightlines during sprint races, endurance events, club competition, and high-performance driving. Integrated Communication, Hydration, and Forced-Air Ports One of the most distinctive features of the Stilo ST5.1 GT Carbon is its modular accessory system. The helmet incorporates integrated side ports that allow drivers to install a variety of compatible motorsport accessories without compromising the streamlined shell design. Available configurations include: Racing Communications: Compatible Stilo microphone, earplug, and radio communication accessories. Forced-Air Cooling: Optional air intake systems designed to provide additional airflow during hot racing conditions. Driver Hydration: Compatible drinking tubes and hydration connections for extended racing sessions. Helmet Eject Compatibility: Provisions for compatible helmet removal assistance equipment, where applicable. Aerodynamic Accessories: Compatible Stilo spoilers and aerodynamic components for specific racing applications. When optional accessories are not installed, the helmet maintains a clean and streamlined appearance. Communication systems, forced-air kits, hydration equipment, and other accessories are sold separately. Clear 3mm Anti-Fog Shield and Center Locking System The Stilo ST5.1 GT Carbon comes equipped with a clear 3mm shield featuring an anti-fog treatment designed to help maintain visibility during changing cockpit temperatures and racing conditions. The helmet uses Stilo's multi-function center shield locking system, allowing drivers to operate the shield while wearing racing gloves. Compatible Stilo ST5 replacement shields are available in different colors and tint options, providing additional flexibility for different lighting conditions. Optional aerodynamic shield accessories and replacement hardware are also available for compatible ST5 configurations. Noise-Attenuating Ear Cups for Racing Communications Excessive cockpit noise can make communication difficult during competitive racing. The Stilo ST5.1 GT Carbon incorporates removable noise-attenuating earmuff cushions designed to reduce sound around the driver's ears. This feature improves comfort and provides an effective foundation for compatible in-ear communication systems. With optional Stilo electronics installed, drivers can configure the helmet for communication with pit crews and race engineers without exposed wiring interfering with their driving position. The earmuff cushions can also be removed or adjusted to accommodate individual comfort preferences. Premium Interior Comfort and Customizable Fit The ST5.1 GT Carbon features a comfortable fire-resistant interior designed for demanding motorsport environments. Removable cheek and crown padding allow drivers to customize helmet fit using compatible Stilo replacement components. Its intermediate oval fit profile is designed to accommodate a variety of head shapes while providing secure contact around the head. The helmet should fit firmly and evenly without excessive pressure points or unwanted movement. For drivers moving from another helmet brand, proper measurement and fitting are recommended before competition. FHR and HANS Anchor Compatibility The Stilo ST5.1 GT Carbon incorporates pre-installed M6 threaded inserts designed for installation of compatible frontal head restraint anchor hardware. These threaded mounting points allow drivers to configure the helmet for use with compatible HANS and FHR devices. Important: HANS/FHR post anchors are not included as standard equipment with this helmet and must be purchased separately unless specifically included in a product bundle. Use only compatible approved anchor hardware and follow the appropriate installation instructions. Stilo ST5.1 GT Carbon Helmet Weight and Shell Construction Stilo's lightweight construction is one of the defining advantages of the ST5 GT Carbon platform. Small Shell: Approximately 2.99 lbs (1,360 g) Large Shell: Approximately 3.32 lbs (1,505 g) Shell Material: Carbon Fiber Shell Construction: Autoclave-Molded Shell Sizes: Two Actual weight may vary depending on helmet size, production revision, and installed accessories. Stilo ST5.1 GT Carbon Technical Specifications Manufacturer: Stilo Helmets Model: ST5.1 GT Carbon Helmet Family: ST5 GT Helmet Type: Full-Face Racing Helmet Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 Shell Material: Carbon Fiber Shell Construction: Autoclave-Molded Carbon Finish: Natural Carbon Fiber Fit Profile: Intermediate Oval Shell Sizes: Small and Large Approximate Small Shell Weight: 2.99 lbs Approximate Large Shell Weight: 3.32 lbs Shield: Clear 3mm Anti-Fog Shield Mechanism: Center Multi-Function Lock Compatible Shields: Stilo ST5 Series Interior: Fire-Resistant Comfort Fabric Removable Cheek Pads: Yes Replaceable Crown Padding: Yes, Compatible Components Available Noise-Attenuating Ear Cups: Included Communication Ready: Yes, Optional Accessories Required Hydration Compatible: Yes, Optional Accessories Required Forced-Air Compatible: Yes, Optional Accessories Required FHR Mounting: Pre-Installed M6 Threaded Inserts HANS Post Anchors: Sold Separately Helmet Bag: Included Country of Manufacture: Italy Primary Application: Road Racing, GT Racing, HPDE, Time Attack, and Endurance Racing Quantity: Sold Individually Stilo ST5.1 GT Carbon Helmet Compatibility The ST5.1 GT Carbon is compatible with a wide range of accessories developed for the Stilo ST5 helmet platform. Available accessory categories include: Stilo ST5 replacement shields and tinted visors Compatible Stilo communication and radio systems Stilo forced-air cooling kits Compatible driver hydration systems Stilo aerodynamic accessories Compatible cheek pads and interior fit components Approved M6 FHR anchor hardware Always verify accessory compatibility with the specific ST5 GT Carbon helmet configuration before purchasing. Stilo ST5.1 GT Carbon Racing Helmet Sizing Chart Stilo ST5.1 GT Carbon Helmet Care and Maintenance Proper care and maintenance help preserve the performance, comfort, and appearance of your Stilo racing helmet. Exterior Care: Clean the carbon fiber shell using a soft microfiber cloth and helmet-safe cleaning products. Avoid abrasive cleaners, harsh solvents, and excessive heat. Shield Care: Clean the anti-fog shield using approved non-abrasive products. Avoid cleaners that could damage the anti-fog treatment. Interior Care: Clean removable padding according to Stilo's care instructions. Allow all components to dry completely before reinstallation. Accessory Ports: Inspect communication connectors, air ports, and hydration connections regularly. Keep ports protected when optional accessories are not installed. Storage: Store the helmet in a cool, dry location away from direct sunlight and chemical exposure. Inspect the helmet and restraint hardware before every racing event. Stilo ST5.1 GT Carbon Racing Helmet FAQs Is the Stilo ST5.1 GT Carbon Snell SA2020 certified?Yes. The ST5.1 GT Carbon carries Snell SA2020 and FIA 8859-2015 homologations. Always verify that these certifications meet your specific racing organization's current requirements. Is the Stilo ST5.1 GT Carbon FIA approved?Yes. The helmet carries FIA 8859-2015 homologation. Some racing categories require FIA 8860 or newer certification standards, so always confirm eligibility with the applicable rulebook. Is the ST5.1 GT Carbon made from real carbon fiber?Yes. The helmet features autoclave-molded carbon fiber construction designed for lightweight performance and strength. How much does the Stilo ST5.1 GT Carbon weigh?The small shell weighs approximately 2.99 lbs, while the large shell weighs approximately 3.32 lbs. Actual weight varies with configuration. Does the helmet include HANS anchors?The helmet includes integrated M6 threaded mounting inserts. Compatible HANS/FHR post anchors must be purchased separately unless specifically included in a bundle. Does the ST5.1 GT Carbon come with an anti-fog shield?Yes. A clear 3mm anti-fog shield is included as standard equipment. Can I install a radio communication system?Yes. The ST5.1 GT Carbon has integrated accessory ports that accommodate compatible Stilo communication equipment. Electronics are sold separately. Can I add a forced-air helmet cooling system?Yes. Compatible Stilo forced-air accessories can be installed using the helmet's integrated accessory provisions. Can I install a driver hydration system?Yes. The helmet accommodates compatible optional hydration equipment for endurance racing applications. Are the cheek pads removable?Yes. The helmet features removable cheek padding and compatible replacement interior components for fit customization. Does the ST5.1 GT Carbon help reduce cockpit noise?Yes. Removable noise-attenuating earmuff cushions help reduce unwanted sound around the ears, improving comfort and supporting clearer communication when compatible electronics are installed. Will ST5 shields fit the ST5.1 GT Carbon?Yes. The helmet uses the Stilo ST5 shield platform. Always confirm compatibility for specific shield styles and accessory configurations. What is the difference between the ST5.1 GT Carbon and ST5.1 GT Composite?The ST5.1 GT Carbon features lightweight carbon fiber construction, while the GT Composite uses fiberglass-based composite construction. Both share many ST5 platform features and accessory options. How does the ST5.1 GT Carbon compare with the newer ST6?The newer Stilo ST6 platform introduces updated aerodynamics, ventilation, visor technology, and interior refinements. The ST5.1 GT Carbon remains a strong value for drivers seeking premium carbon construction and established ST5 accessory compatibility. Is the ST5.1 GT Carbon suitable for endurance racing?Yes. Its lightweight construction, noise-attenuating ear cups, and optional communication, hydration, and forced-air compatibility make it well suited for endurance racing when permitted by the event's safety regulations. Closeout Savings on the Stilo ST5.1 GT Carbon Take advantage of outstanding savings on our remaining inventory of the Stilo ST5.1 GT Carbon Fiber Racing Helmet. With professional carbon fiber construction, Snell SA2020 and FIA 8859-2015 certification, a clear anti-fog shield, and extensive ST5 accessory compatibility, this helmet continues to offer exceptional performance for serious racers. Limited remaining inventory. Available sizes and quantities may be restricted. Shipping Notice: Signature required upon delivery. Other Versions If you prefer a fiberglass shell, see the Stilo ST5.1 GT Composite Helmet. If your racing series requires FIA 8860 certification, see the Stilo ST5 GT 8860-2018 Carbon Helmet. Signature Required: This helmet ships with signature confirmation upon delivery.

Arai GP-7 Racing Helmet – Snell SA2020 / FIA 8859-2015 The Arai GP-7 Racing Helmet combines Arai's championship-inspired helmet technology, advanced impact protection, and exceptional comfort in a premium full-face helmet designed for demanding motorsport competition. Certified to Snell SA2020 and FIA 8859-2015, the GP-7 features Arai's proprietary PBcLc (Peripherally Belted Complex Laminate) shell construction, an advanced multi-density EPS impact liner, improved ventilation, and a larger eyeport for enhanced visibility. Developed using the same fundamental shell shape as Arai's Formula One-grade GP-7SRC, the GP-7 brings professional racing helmet engineering to road racing, GT competition, endurance racing, and performance driving. With its intermediate oval fit, customizable FCS cheek pads, positive shield locking mechanism, and integrated M6 head-and-neck restraint mounting provisions, the Arai GP-7 delivers a combination of protection, driver comfort, and track-ready functionality. Arai GP-7 SA2020 Helmet Key Features Snell SA2020 Certified: Meets the Snell SA2020 automotive racing helmet safety standard. FIA 8859-2015 Homologated: Certified for applicable FIA motorsport competition under the 8859-2015 standard. PBcLc Shell Construction: Arai's proprietary Peripherally Belted Complex Laminate construction balances shell strength, flexibility, and impact protection. GP-7SRC-Inspired Shell Shape: Developed using the fundamental shell geometry of Arai's Formula One racing helmet platform. Intermediate Oval Fit: Designed to accommodate drivers with an intermediate oval head shape. Multi-Density EPS Liner: Energy-absorbing liner construction designed to help manage impact forces. Enlarged Eyeport: Expanded peripheral visibility compared with earlier-generation Arai racing helmets. Positive Shield Latch: Secure shield locking system designed for reliable operation during competition. Updated Shield Pivot System: Low-profile hardware and a redesigned track slider arrangement. Advanced Ventilation: Three larger, closeable intake vents combined with four exhaust cowls. FCS Cheek Pads: Sculpted Facial Contour System cheek pads provide a secure, personalized fit. Replaceable Cheek Pads: Optional replacement thicknesses allow fit refinement. M6 FHR Mounting Provisions: Factory-installed threaded inserts support compatible HANS/FHR anchors. Eject System Ready: Pre-cut crown pad pocket accommodates the optional Eject helmet removal system. Hydration Compatible: Removable chin liner includes provisions for drink tube installation. Multiple Shield Options: Compatible replacement shields are available in clear, tinted, mirrored, and anti-fog configurations. Color Options: Gloss White and Black Frost. PBcLc Shell Construction and Advanced Impact Protection The Arai GP-7 uses Arai's proprietary PBcLc (Peripherally Belted Complex Laminate) shell construction, developed to provide excellent shell strength while maintaining the flexibility required for effective energy management. The shell incorporates Arai's Peripherally Belted design philosophy, which emphasizes shell integrity around the critical eyeport area. This advanced construction works together with the helmet's multi-density EPS liner to help manage impact energy during demanding racing conditions. The GP-7 shares its fundamental shell shape with the GP-7SRC racing helmet platform, bringing technology developed through professional motorsport into a more accessible racing helmet. Snell SA2020 and FIA 8859-2015 Racing Certifications The Arai GP-7 is certified to Snell SA2020 and FIA 8859-2015, providing established motorsport helmet safety certification for qualifying racing applications. These standards include testing requirements for automotive racing helmet impact performance and related protective characteristics. The FIA 8859-2015 homologation label is applied to the helmet's interior liner. Important: Racing organizations establish their own helmet certification acceptance rules. Because this is an earlier-generation SA2020 helmet, confirm that your specific racing organization continues to accept its certification before competition. Expanded Eyeport for Improved Peripheral Vision The Arai GP-7 features an enlarged eyeport designed to improve driver visibility compared with previous Arai racing helmet generations. The wider opening supports improved peripheral awareness, allowing drivers to more easily monitor mirrors, nearby competitors, cockpit instruments, and corner workers. The GP-7's eyeport geometry, shield design, and pivot hardware were developed using technology derived from Arai's professional racing helmet platforms. Improved visibility is particularly valuable in GT racing, road racing, endurance competition, and other applications where driver awareness is essential. Positive Shield Latch for Secure Visor Operation The Arai GP-7 uses a positive shield latching mechanism designed to provide secure closure while maintaining convenient operation. The latch is integrated into the shield system rather than added as a separate external component. This design helps provide reliable visor retention while allowing normal shield opening and closing. Drivers can operate the shield during preparation, pit stops, and racing activities according to Arai's operating instructions. Updated Shield Pivot Hardware and Aerodynamic Design The GP-7 incorporates updated shield pivot hardware with a redesigned one-piece track slider and low-profile mounting components. The hardware uses a T20 Torx adjustment system that allows the shield pivot arrangement to sit lower on the helmet shell. This design supports Arai's philosophy of creating smooth, rounded helmet surfaces intended to encourage impact forces to glance away from the shell. The revised system also maintains the helmet's enlarged eyeport and convenient shield operation. Advanced GP-7 Ventilation System Arai developed the GP-7 ventilation system to improve airflow and comfort during demanding motorsport competition. The helmet includes three larger, closeable intake vents with enlarged air passages designed to direct cooling airflow into the helmet. Four enlarged exhaust cowls work with the intake system to help remove warm air from the interior. A redesigned rear exhaust arrangement improves airflow management while supporting aerodynamic efficiency. This ventilation system is especially beneficial during warm-weather track days, extended endurance sessions, and high-temperature racing conditions. Facial Contour System Cheek Pads for a Secure Fit The Arai GP-7 features sculpted Facial Contour System (FCS) cheek pads designed to provide a secure and comfortable fit around the driver's lower jaw. The cheek pad shape helps stabilize the helmet while reducing unwanted movement during high-speed driving. Its design also helps reduce wind and cockpit noise entering through the lower helmet opening. Compatible replacement cheek pads are available in different thicknesses, allowing drivers to refine the fit without replacing the entire helmet. This adjustable fit system is especially useful for drivers who need additional cheek support or prefer a more personalized interior configuration. Intermediate Oval Helmet Fit The Arai GP-7 is designed around an intermediate oval head shape, a common fit profile among automotive racing helmets. A properly fitted helmet should provide consistent contact around the head without excessive pressure points or unwanted movement. To select the appropriate size, measure the circumference of your head approximately one inch above your eyebrows and around the widest part at the back of your head. Repeat the measurement several times and use Arai's official sizing recommendations when selecting your helmet. Because every driver's head shape is different, a professional helmet fitting is recommended whenever possible. Factory-Installed M6 HANS and FHR Mounting Provisions The Arai GP-7 includes factory-installed M6 threaded inserts designed for compatible frontal head restraint mounting hardware. These mounting provisions allow drivers to install approved HANS/FHR anchor posts without modifying the protective helmet shell. The helmet features a flattened mounting surface around each threaded insert, allowing compatible anchor bases to rest flush against the shell. Important: The M6 threaded inserts are factory installed. HANS/FHR anchor posts are separate components unless specifically included in the purchased configuration. Always follow the anchor manufacturer's installation instructions and the requirements of your sanctioning organization. Eject System Ready Crown Pad The Arai GP-7 is designed to accommodate an optional helmet Eject system. A pre-cut pocket beneath the crown pad allows installation of compatible Eject equipment. The optional system is intended to assist trained safety personnel with controlled helmet removal following a racing incident. Note: The Eject system is an optional accessory and is not included with the standard GP-7 helmet. Integrated Hydration System Compatibility The GP-7 features a removable center chin liner designed to simplify installation of compatible driver hydration equipment. The chin liner provides four available drink tube routing locations, allowing racers to select a configuration suited to their cockpit layout and equipment. Hydration compatibility is particularly valuable for endurance racing and extended track sessions in hot environments. Compatible drink tubes, valves, and hydration equipment are sold separately. Arai GP-7 Racing Helmet Technical Specifications Manufacturer: Arai Helmets Model: GP-7 Helmet Type: Full-Face Auto Racing Helmet Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 Shell Construction: PBcLc – Peripherally Belted Complex Laminate Impact Liner: Multi-Density EPS Helmet Shape: Intermediate Oval Exterior Colors: Gloss White and Black Frost Eyeport: Enlarged Racing Eyeport Shield Latch: Positive Locking Mechanism Shield Pivot: Low-Profile Track Slider System Pivot Hardware: T20 Torx Adjustable Upper Intake Vents: Three Closeable Intakes Exhaust Ventilation: Four Exhaust Cowls Cheek Pad System: Facial Contour System Replaceable Cheek Pads: Yes HANS/FHR Mounting: Factory-Installed M6 Threaded Inserts HANS/FHR Posts: Optional Eject System Compatible: Yes, Optional Hydration Compatible: Yes, Optional Drink Tube Routing: Four Chin Liner Locations Replacement Shields: Genuine Arai GP-7 Shield System Available Helmet Sizes: XS Through L, Subject to Inventory Primary Application: Road Racing, GT Racing, Endurance Racing, Club Racing and HPDE Quantity: Sold Individually Arai GP-7 SA2020 Racing Helmet Sizing Chart Arai GP-7 Helmet Care and Maintenance Regular inspection and proper cleaning help preserve the performance, comfort, and appearance of your Arai GP-7 racing helmet. Exterior Care: Clean the helmet shell using a soft microfiber cloth and Arai-approved helmet cleaning products. Avoid abrasive materials and aggressive solvents. Shield Care: Clean the racing shield using appropriate visor-safe products. Inspect regularly for scratches, cracks, or other damage that could affect visibility. Ventilation Maintenance: Keep intake and exhaust openings clear of dirt and debris. Inspect movable vent components before racing. Interior Care: Follow Arai's instructions when removing or replacing compatible cheek padding and interior components. Hardware Inspection: Check the shield locking mechanism, pivot screws, chin strap, and FHR mounting hardware before each event. Storage: Store the helmet in a clean, cool, dry environment away from direct sunlight, excessive heat, and chemical exposure. Arai GP-7 SA2020 Racing Helmet FAQs Is the Arai GP-7 Snell SA2020 certified? Yes. The Arai GP-7 carries Snell SA2020 certification for qualifying automotive motorsport applications. Is the Arai GP-7 FIA approved? Yes. The GP-7 is homologated to FIA 8859-2015. Always verify that this certification remains accepted by your racing organization. What is the Arai GP-7 shell made from? The helmet uses Arai's proprietary PBcLc, or Peripherally Belted Complex Laminate, shell construction. Is the Arai GP-7 a carbon fiber helmet? The standard GP-7 uses PBcLc composite construction rather than the specialized racing-carbon construction found in the GP-7SRC models. What head shape does the Arai GP-7 fit? The GP-7 is designed for an intermediate oval head shape. Does the Arai GP-7 have removable cheek pads? Yes. The helmet features replaceable FCS cheek pads, with optional thicknesses available for fit adjustment. Does the GP-7 include HANS posts? The GP-7 includes factory-installed M6 threaded mounting inserts. Compatible HANS/FHR post anchors are optional and should be ordered separately unless included in a specific package. Can I install an Eject system? Yes. The GP-7 features a pre-cut pocket beneath the crown pad for an optional compatible Eject helmet removal system. Can I add a hydration system? Yes. The removable center chin liner provides four routing locations for compatible drinking tubes. How is the GP-7 ventilation system designed? It features three enlarged, closeable upper intake vents and four exhaust cowls that help circulate airflow through the helmet. Does the GP-7 have a shield locking system? Yes. The helmet incorporates Arai's positive shield latch designed to provide secure visor closure during racing. What replacement shields fit the Arai GP-7? Genuine Arai GP-7 replacement shields are available in clear, tinted, mirrored, anti-fog and dual-pane configurations. What colors are available? The GP-7 is available in Gloss White and Black Frost, subject to inventory. What is the difference between the GP-7 and GP-7SRC? The standard GP-7 features PBcLc composite construction, while the GP-7SRC uses specialized racing-carbon materials and is designed for higher-level professional motorsport certification requirements. Is the Arai GP-7 suitable for endurance racing? Yes. Its ventilation, enlarged eyeport, customizable cheek pads and optional hydration compatibility make it well suited to endurance racing when its certification meets event requirements. Is the Arai GP-7 still legal for racing? The GP-7 carries Snell SA2020 and FIA 8859-2015 certifications. Eligibility depends on the specific racing series, event, and current helmet rules. Professional Racing Comfort With the Arai GP-7 The Arai GP-7 SA2020 Racing Helmet combines proven PBcLc shell construction, advanced ventilation, a larger eyeport, and Arai's legendary attention to helmet fit and comfort. With its positive shield latch, replaceable FCS cheek pads, integrated M6 FHR mounting provisions, and optional hydration and Eject system compatibility, the GP-7 remains a versatile helmet for motorsport enthusiasts and competitive drivers. Shipping Notice: Signature confirmation is required upon delivery.   Additional Arai GP-7 shields in various tints and colors available here.

Stilo ST5 GT Composite Racing Helmet   Snell SA2020 / FIA 8859-2015 The Stilo ST5 GT Composite Racing Helmet combines lightweight fiberglass/Kevlar composite construction, exceptional visibility, and one of the most versatile integrated accessory systems in motorsports. Designed for GT racing, endurance competition, road racing, and performance driving, the ST5 GT delivers professional racing helmet technology with the flexibility to accommodate a wide range of driver equipment. Certified to Snell SA2020 and FIA 8859-2015, the Stilo ST5 GT Composite features an advanced Multi Sandwich Fiber (MSF) shell, an expansive eyeport, a clear anti-fog visor, noise-attenuating earmuffs, and integrated side ports for compatible communication, hydration, and ventilation accessories. Its Intermediate Oval interior shape, removable comfort padding, and two-shell construction provide a secure, customizable fit. Whether preparing for sprint races, endurance events, or track days, the Stilo ST5 GT Composite offers an excellent combination of comfort, safety engineering, and versatility. Stilo ST5 GT Composite Racing Helmet Features Snell SA2020 Certified: Meets the Snell SA2020 automotive racing helmet safety standard. FIA 8859-2015 Homologated: Approved to the FIA 8859-2015 motorsport helmet standard. Fiberglass/Kevlar Composite Shell: Multi Sandwich Fiber construction engineered for strength, impact management, and comfort. Autoclave-Molded Construction: Advanced shell manufacturing process designed to deliver consistent structural performance. Wide Eyeport: Expansive viewing area improves peripheral vision and cockpit awareness. Clear Anti-Fog Visor: Includes a 3mm clear shield with an anti-fog treatment. Central Visor Lock: Convenient center-mounted closure designed for operation while wearing racing gloves. Integrated Side Accessory Ports: Accommodate compatible radio, hydration, and ventilation accessories. Noise-Attenuating Earmuffs: Included removable earmuff cushions help reduce unwanted cockpit noise. Removable Cheek and Crown Padding: Allows fit adjustments using compatible Stilo interior components. Intermediate Oval Fit: Designed for a comfortable, secure fit across a variety of head shapes. Two Shell Sizes: Small and large exterior shells reduce unnecessary bulk. M6 FHR Terminals: Factory-installed threaded receivers accommodate approved HANS and head-and-neck-restraint anchors. Optional Forced-Air Compatibility: Supports compatible Stilo air-cooling accessories. Multiple Visor Options: Compatible with selected clear, tinted, mirrored, and iridium ST5 shields. Made in Italy: Manufactured and assembled using Stilo's motorsport helmet production processes. Lightweight Fiberglass/Kevlar Multi Sandwich Fiber Shell The Stilo ST5 GT Composite features an advanced Fiberglass/Kevlar Multi Sandwich Fiber (MSF) shell designed to balance structural strength, impact-energy management, and helmet weight. Its composite shell construction uses multiple reinforcing materials arranged to provide the protective performance required by Snell SA2020 and FIA 8859-2015. Stilo manufactures the composite shell using an autoclave molding process designed to deliver consistent construction and strength throughout the helmet. The ST5 GT Composite offers a premium alternative to conventional fiberglass racing helmets while maintaining a comfortable, manageable weight for extended driving sessions. Snell SA2020 and FIA 8859-2015 Racing Certification The Stilo ST5 GT Composite carries two recognized automotive motorsport safety certifications: Snell SA2020: Automotive racing helmet certification addressing impact performance and other motorsport-specific safety requirements. FIA 8859-2015: FIA homologation for racing helmets used in approved motorsport applications. These certifications make the ST5 GT Composite suitable for numerous road racing, club racing, track-day, and endurance racing applications where the relevant standards remain accepted. Important: FIA 8859-2015 is not the same as FIA 8860-2018. Racing organizations establish their own accepted certification standards and expiration requirements. Always verify helmet eligibility before competition. Large Eyeport for Exceptional Driver Visibility Visibility is one of the defining characteristics of the Stilo ST5 GT Composite. Its generous eyeport design provides excellent peripheral vision, allowing drivers to maintain greater awareness of mirrors, approaching competitors, dashboard instruments, and cockpit surroundings. The expanded opening is particularly valuable for GT and endurance racing, where situational awareness is essential when navigating traffic and monitoring vehicle information. The helmet's eyeport design also supports Stilo's extensive selection of replacement visors and optical accessories. 3mm Clear Anti-Fog Racing Visor The ST5 GT Composite includes a 3mm clear visor with anti-fog treatment designed to help maintain visibility in changing cockpit conditions. Stilo's central visor locking mechanism provides an accessible closure point that can be operated while wearing racing gloves. The ST5 visor platform supports multiple optional shield finishes, allowing drivers to tailor their setup for different lighting conditions. Compatible options may include clear, smoke, mirrored, and iridium finishes, depending on availability. Explore the Stilo ST5 and ST5.1 Replacement Helmet Shields for additional options. Integrated Side Ports for Maximum Customization One of the ST5 GT Composite's most distinctive features is its integrated side accessory port system. Unlike conventional racing helmets that may require external accessory mounting arrangements, Stilo designed the ST5 shell with dedicated side ports that accommodate compatible components while maintaining a clean helmet profile. Depending on the selected installation, the helmet can accommodate: Integrated communication electronics Compatible microphones and speakers Radio and intercom connection systems Driver hydration equipment and drinking tubes Side-air ventilation accessories Compatible air-cooling systems This modular configuration makes the ST5 GT particularly useful for endurance racing teams and drivers who need to customize their helmets for different vehicles. Communication electronics, hydration systems, air accessories, and other optional equipment are sold separately unless specifically included in the selected configuration. Noise-Attenuating Earmuffs for GT and Endurance Racing The Stilo ST5 GT Composite includes removable noise-attenuating earmuff cushions designed to reduce unwanted sound inside noisy competition vehicles. By creating additional isolation around the ears, these cushions can help improve driver comfort during extended racing sessions. They also provide a useful foundation for compatible integrated communication systems, allowing microphone and speaker equipment to be installed according to driver preference. For endurance racers, effective sound management can make radio communication easier to understand during long stints. Removable Cheek Pads and Adjustable Interior Fit Proper helmet fit is essential for protective performance, comfort, and stability. The ST5 GT Composite incorporates removable cheek and crown comfort padding, allowing compatible interior components to be exchanged when appropriate. This flexibility enables drivers to fine-tune the helmet's fit without compromising the integrity of the protective shell. The black Nomex interior provides fire-resistant materials suitable for automotive motorsport applications. Stilo's Intermediate Oval interior shape is designed to provide secure contact around the head while accommodating a broad range of drivers. Replacement pads must be selected specifically for the ST5 helmet platform and installed according to manufacturer recommendations. Two Shell Sizes for Reduced Weight and Bulk The Stilo ST5 GT Composite uses two exterior shell sizes to provide more proportional helmet dimensions across its available size range. The smaller shell accommodates helmet sizes 54, 55, 57, and 59, while the larger shell accommodates sizes 60, 61, 63, and 64. This approach helps reduce unnecessary exterior material around smaller head sizes while providing adequate interior dimensions for larger drivers. The transition between the small and large shell occurs at size 60, making it particularly important to evaluate fit when selecting between sizes 59 and 60. M6 HANS and FHR Anchor Compatibility The Stilo ST5 GT Composite includes factory-installed M6 threaded mounting receivers designed for approved Frontal Head Restraint hardware. These threaded mounting points allow compatible HANS and other FHR anchor posts to be installed without modifying the helmet shell. Important: M6 threaded receivers are included, but HANS/FHR anchor posts are sold separately unless specified in the selected package. Always use approved anchor hardware and follow the installation requirements of the helmet and head-and-neck-restraint manufacturers. Optional Forced-Air Cooling and Hydration Systems For drivers competing in hot environments or extended endurance races, the ST5 GT Composite can be configured with compatible Stilo ventilation and hydration accessories. Available configurations include selected side-air and top-air systems that can help introduce external cooling air into the helmet. Hydration accessories allow compatible drinking tubes to be routed through the helmet's integrated accessory system. The helmet's modular design helps keep these systems organized while reducing interference with the driver's comfort padding and cockpit equipment. Air-cooling hardware, hydration components, and external cooling equipment are available separately. Stilo ST5 GT Composite Helmet Specifications Manufacturer: Stilo Model: ST5 GT Composite Helmet Type: Full-face automotive racing helmet Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 Shell Material: Fiberglass/Kevlar Multi Sandwich Fiber Shell Construction: Autoclave-molded composite Exterior Shell Sizes: Two Fit Profile: Intermediate Oval Interior: Black Nomex Comfort Padding: Removable cheek and crown pads Earmuffs: Removable noise-attenuating cushions included Included Shield: 3mm clear anti-fog visor Visor System: Central locking mechanism Compatible Shields: Stilo ST5 and ST5.1 FHR Mounting: Factory-installed M6 threaded receivers FHR Anchor Posts: Sold separately Accessory Ports: Integrated side-mounted system Communication System: Optional Hydration System: Optional Forced-Air Compatibility: Yes, with compatible accessories Chin Strap: Double D-ring Helmet Bag: Included Available Finishes: Silver, Matte Black, White Manufacturer Country: Italy Stilo ST5 GT Composite Sizing Chart  Stilo ST5 GT Composite Available Colors The ST5 GT Composite is offered in three traditional racing finishes: Silver: Metallic motorsport appearance with a premium gloss finish. Matte Black: Subtle, understated styling with a non-gloss exterior. White: Classic racing helmet appearance suitable for a wide range of driver equipment. Color and size availability may vary by remaining manufacturer inventory. Stilo ST5 GT Composite vs. ST5 GT Carbon The Stilo ST5 GT Composite and ST5 GT Carbon share the versatile ST5 platform, large eyeport, integrated accessory ports, and motorsport-focused design. The primary difference is the outer shell construction. ST5 GT Composite: Uses Stilo's fiberglass/Kevlar Multi Sandwich Fiber construction, providing a balance of performance, durability, and value. ST5 GT Carbon: Uses a carbon fiber shell designed to reduce weight while preserving the ST5 platform's flexibility and accessory compatibility. Both versions are intended for drivers who value integrated equipment options and a customizable GT racing helmet configuration. Ideal Applications for the Stilo ST5 GT Composite The ST5 GT Composite is designed for a wide range of automotive motorsport applications: GT Racing: Wide eyeport, noise-attenuating earmuffs, and optional communication integration. Endurance Racing: Compatible hydration, air-cooling, and radio accessory systems. Club Racing: Full-face construction and recognized Snell and FIA certifications. Track Days and HPDE: Comfortable, secure helmet design for performance driving. Touring Car Racing: Wide field of vision and modular communication options. Time Trials: Lightweight construction and supportive interior fit. Sprint Racing: Professional motorsport helmet features for competitive driving sessions. Always confirm that the helmet's Snell SA2020 and FIA 8859-2015 certifications remain accepted by your racing organization. Stilo ST5 GT Composite Frequently Asked Questions What certifications does the Stilo ST5 GT Composite have? The ST5 GT Composite carries Snell SA2020 and FIA 8859-2015 certifications. Confirm that these standards are accepted for your intended racing application. Is the Stilo ST5 GT Composite made from carbon fiber? The ST5 GT Composite uses a fiberglass/Kevlar Multi Sandwich Fiber shell. The ST5 GT Carbon is a separate model featuring carbon fiber construction. Does the Stilo ST5 GT Composite include HANS anchors? The helmet includes factory-installed M6 threaded receivers, but compatible HANS/FHR anchor posts are sold separately. Does the ST5 GT Composite come with a visor? Yes. A clear 3mm anti-fog visor is included. Can I install tinted or mirrored shields? Yes. Compatible Stilo ST5 and ST5.1 replacement shields are available in several optional finishes. Does the ST5 GT include built-in communications? The standard helmet includes accessory ports and removable earmuffs. Radio electronics, microphones, speakers, and compatible communication kits are available separately. Can I install a hydration system? Yes. The integrated side accessory ports support compatible Stilo hydration components. Can the ST5 GT Composite use a forced-air cooling system? Yes. Compatible side-air and top-air accessories allow integration with selected external cooling systems. Are the cheek pads removable? Yes. The comfort cheek pads can be removed or replaced with compatible Stilo components. Does the helmet include noise-attenuating earmuffs? Yes. Removable earmuff cushions are included to help reduce unwanted cockpit noise. What is the head shape of the ST5 GT Composite? The helmet has an Intermediate Oval interior profile. Proper fit should be confirmed by measuring and trying on the helmet. How many shell sizes does the ST5 GT Composite have? The helmet uses two exterior shell sizes. The smaller shell accommodates sizes 54 through 59, while the larger shell accommodates sizes 60 through 64 in the manufacturer's listed size options. Can I use ST5 replacement visors on an ST5.1 helmet? Stilo lists ST5 and ST5.1 visor compatibility for the corresponding shield family. Always verify the specific visor part number before ordering. Does the Stilo ST5 GT Composite include a helmet bag? Yes. A helmet bag is included with the standard helmet package. What is the difference between the ST5 GT Composite and ST5 GT Carbon? The Composite version uses fiberglass/Kevlar construction, while the Carbon model uses carbon fiber construction. Both share the modular ST5 GT design and compatible accessory systems. Is the Stilo ST5 GT Composite suitable for endurance racing? Yes. Its modular communication, hydration, and cooling compatibility make it well suited to endurance racing where the helmet's certification is accepted. Why Choose the Stilo ST5 GT Composite Racing Helmet? The Stilo ST5 GT Composite Snell SA2020 Racing Helmet delivers an outstanding combination of protective construction, comfortable interior design, excellent visibility, and integrated accessory versatility. From track-day driving to competitive endurance racing, its fiberglass/Kevlar composite shell, noise-attenuating earmuffs, wide eyeport, and modular side ports provide a configurable platform for drivers with a wide variety of racing requirements. Choose the ST5 GT Composite for proven Stilo engineering, professional motorsport performance, and the flexibility to build a helmet setup around your driving needs.

Stilo Venti Sport Jet Composite Helmet – SA2020 Open-Face Racing Protection The Stilo Venti Sport Jet Composite Helmet combines lightweight fiberglass/Kevlar construction, advanced motorsport safety certification, and driver-focused comfort in a versatile open-face racing helmet. Designed for rally drivers, track-day enthusiasts, HPDE instructors, and competitive racers, the Venti Sport Jet delivers Stilo's renowned helmet technology in an accessible, performance-oriented design. Featuring Snell SA2020 and FIA 8859-2015 certification, the Stilo Venti Sport Jet offers a fiberglass/Kevlar MSF composite shell, adjustable peak, factory-installed HANS anchors, and a comfortable interior designed for extended driving sessions. The Sport Jet provides the same fundamental open-face helmet design as the Venti Sport Plus without its integrated communication electronics, making it an excellent choice for drivers who do not require a built-in intercom system. motorsport safety features, and outstanding open-face visibility for your next racing event. Stilo Venti Sport Jet Helmet Features Snell SA2020 certified: Meets recognized automotive racing helmet safety requirements. FIA 8859-2015 homologated: Approved to an established FIA motorsport helmet standard. Fiberglass/Kevlar composite shell: MSF (Multi Sandwich Fiber) construction with Kevlar reinforcement. Factory-installed HANS anchors: Head and neck restraint posts are pre-installed. Adjustable peak: Helps reduce glare during daytime racing and track sessions. Short visor: Provides additional coverage beneath the peak. Open-face construction: Offers excellent peripheral visibility and easier communication. Comfortable interior: Soft lining designed for long driving sessions. Ventilated design: Upper ventilation openings help promote airflow. Two shell sizes: Designed to improve fit and exterior shell proportions. Gloss white finish: Clean, professional motorsport appearance. Made in Italy: Manufactured by Stilo. Lightweight Fiberglass and Kevlar MSF Composite Shell The Stilo Venti Sport Jet features a fiberglass/Kevlar MSF composite shell developed to deliver a combination of structural strength, impact protection, and manageable weight. MSF stands for Multi Sandwich Fiber, a construction method that combines composite materials with Kevlar reinforcement to provide a strong protective shell. The helmet's construction is designed to offer a practical balance of performance and comfort for rally racing, HPDE instruction, and extended track sessions. Snell SA2020 and FIA 8859-2015 Safety Certifications The Stilo Venti Sport Jet carries two recognized motorsport safety certifications: Snell SA2020: Automotive racing helmet certification covering protective performance requirements for motorsport use. FIA 8859-2015: FIA homologation for competition helmets meeting the applicable safety standard. These certifications make the Venti Sport Jet suitable for many forms of organized motorsport where open-face helmets and these certification standards are accepted. Important: Helmet eligibility varies by racing organization and event. Always confirm that Snell SA2020 and FIA 8859-2015 helmets are accepted under your current competition rules before purchasing. Factory-Installed HANS Anchors for Head and Neck Restraint Systems The Stilo Venti Sport Jet comes equipped with pre-installed HANS post anchors, allowing drivers to connect a compatible frontal head restraint system without purchasing a separate set of helmet posts. These factory-installed anchors provide a convenient solution for drivers who use HANS-style head and neck restraint systems during competition. Always confirm compatibility with your restraint device and follow the manufacturer's instructions for proper use. Adjustable Peak and Short Visor for Improved Visibility The Stilo Venti Sport Jet features an adjustable peak and short visor designed to help manage glare while preserving the wide field of view associated with open-face helmets. The peak can be positioned to help shield the driver's eyes from sunlight during daytime events, while the short visor adds coverage across the upper portion of the face opening. This configuration makes the Venti Sport Jet especially practical for rally, autocross, and track-day applications where driver awareness is essential. Open-Face Design for Rally Racing and Driver Instruction The open-face construction of the Stilo Venti Sport Jet provides an expansive field of vision and allows easier communication between drivers, instructors, and crew members. Its design is particularly useful in motorsport activities where drivers regularly communicate with passengers or instructors, including HPDE events, rally competition, and driving schools. Unlike a full-face helmet, the Venti Sport Jet does not include a full chin bar, making it important to verify that an open-face helmet is appropriate for your competition and vehicle. Ventilation and Interior Comfort Stilo designed the Venti Sport Jet with upper ventilation openings that help promote airflow during driving sessions. The helmet also features a soft interior lining developed to provide a comfortable, supportive fit without unnecessary bulk. Combined with its composite shell construction and adjustable peak, the Venti Sport Jet provides a practical solution for drivers who spend extended periods behind the wheel. Stilo Venti Sport Jet vs. Venti Sport Plus The Stilo Venti Sport family includes two open-face configurations designed for different communication requirements. Stilo Venti Sport Jet: The standard open-face version featuring an adjustable peak, lightweight composite shell, and pre-installed HANS anchors. This model does not include built-in communication electronics. Stilo Venti Sport Plus: Adds an adjustable boom microphone and speakers for compatible wired rally intercom systems. The Sport Jet is ideal for drivers who prefer a straightforward racing helmet or already have a separate communication solution. The Sport Plus is better suited for rally teams and drivers requiring integrated in-helmet communications. Stilo Venti Sport Jet Composite Helmet Specifications Manufacturer: Stilo Model: Venti Sport Jet Helmet Type: Open-face automotive racing helmet Shell Construction: Fiberglass/Kevlar MSF composite Certification: Snell SA2020 FIA Homologation: FIA 8859-2015 Head and Neck Restraint: Factory-installed HANS post anchors Peak: Adjustable Visor: Short visor Ventilation: Upper ventilation openings Interior: Soft motorsport helmet lining Shell Sizes: Two Color: Gloss White Communication Electronics: Not included with Sport Jet Manufacturing Country: Italy Ideal Applications for the Stilo Venti Sport Jet The Venti Sport Jet is suitable for a variety of motorsport activities where open-face helmets are permitted: Rally Racing: Wide visibility and convenient communication with co-drivers. HPDE and Track Days: Comfortable open-face design for performance driving sessions. Driving Instruction: Easier communication with students and passengers. Autocross: Lightweight construction for competitive driving. Historic and Vintage Racing: Classic open-face styling paired with modern safety certification. Motorsport Training: Suitable for approved driving school and instruction applications. Stilo Venti Sport Jet HelmetSizing Chart Proper helmet fit is essential for driver protection, comfort, and stability. The Stilo Venti Sport Jet is offered in two shell sizes to accommodate different head circumferences. To determine your helmet size, use a flexible measuring tape around the widest part of your head, approximately one inch above your eyebrows. Keep the tape level and take multiple measurements to confirm the circumference. A racing helmet should fit snugly without excessive movement or painful pressure points. Always compare your measurement with the manufacturer's sizing recommendations. Stilo Fitment Tip: Some drivers who normally wear a size 59 in other helmet brands find Stilo size 60 more comfortable because it uses the larger shell. Fit varies by head shape, so this is a general recommendation rather than a guaranteed fit. Stilo Venti Sport Jet Frequently Asked Questions What certifications does the Stilo Venti Sport Jet helmet have? The Stilo Venti Sport Jet is certified to Snell SA2020 and FIA 8859-2015 motorsport helmet standards. Does the Stilo Venti Sport Jet come with HANS anchors installed? Yes. The helmet includes factory-installed HANS post anchors for use with compatible head and neck restraint systems. What is the difference between the Venti Sport Jet and Sport Plus? The Sport Jet is the standard open-face helmet without integrated communication electronics. The Sport Plus adds a boom microphone and speakers for compatible wired intercom systems. Is the Stilo Venti Sport Jet a full-face helmet? No. The Venti Sport Jet is an open-face racing helmet without a full chin bar. It provides a wide field of vision but less facial coverage than a full-face helmet. What material is the helmet shell made from? The helmet uses Stilo's fiberglass/Kevlar MSF composite construction with Kevlar reinforcement. Does the helmet have an adjustable visor? Yes. The Venti Sport Jet includes an adjustable peak and short visor to help reduce glare during driving. Does the Stilo Venti Sport Jet include a microphone and speakers? No. Built-in communication electronics are not included with the Sport Jet. The Venti Sport Plus is the version supplied with a boom microphone and speakers. Can I use the Stilo Venti Sport Jet for HPDE events? Yes, provided the event organizer accepts Snell SA2020 open-face helmets and the helmet meets any additional vehicle-specific safety requirements. What color is the Stilo Venti Sport Jet available in? The Venti Sport Jet is offered in a classic gloss white finish. Is the Stilo Venti Sport Jet suitable for professional racing? It may be used in sanctioned competition where its certification standards and open-face design are permitted. Always verify current helmet requirements with your racing organization. Why Buy the Stilo Venti Sport Jet from Competition Motorsport? Competition Motorsport specializes in premium racing safety equipment for professional competitors, amateur racers, HPDE drivers, and driving instructors. The Stilo Venti Sport Jet offers a practical combination of composite shell construction, factory-installed HANS anchors, open-face visibility, and recognized motorsport certification. Whether you're preparing for a rally event, upgrading your track-day equipment, or outfitting your driving instruction program, the Stilo Venti Sport Jet provides reliable Stilo craftsmanship in a versatile open-face design. Complete Your Racing Helmet Setup Protect your new helmet between events with the Competition Motorsport Performance Racing Helmet Bag. For additional information on selecting the right racing helmet, visit our Auto Racing Helmet Buyer's Guide. Choose your Stilo Venti Sport Jet Composite Helmet and enjoy lightweight construction, professional motorsport safety features, and outstanding open-face visibility for your next racing event. Other Stilo ST5-Series Helmets Available Stilo Helmets ST5.1 GT Carbon Helmet Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet Stilo Helmets ST5 GT 8860-2018 Carbon Helmet  

Bell M.8 SA2020 Racing Helmet  Wide Eyeport, Lightweight Composite Protection The Bell M.8 SA2020 Racing Helmet combines classic Bell motorsport styling with modern safety engineering, lightweight composite construction, and exceptional driver visibility. Developed as the next evolution of Bell's legendary M-Series helmet design, the M.8 is ideal for racers who want a larger eyeport, outstanding comfort, and versatile performance for a wide range of automotive racing applications. Featuring an oversized eye opening that is especially accommodating for drivers wearing eyeglasses, the Bell M.8 offers an expanded field of vision without sacrificing the protective advantages of a full-face racing helmet. With Snell SA2020 certification, a multi-density impact-absorbing liner, fire-resistant interior, adjustable ventilation, and integrated M6 head and neck restraint mounting points, the Bell M.8 delivers dependable performance for track days, road racing, autocross, and other motorsport applications where its certification is accepted. Bell M.8 SA2020 Racing Helmet Features Snell SA2020 certified: Designed to meet recognized automotive racing helmet safety requirements. Extra-large eyeport: Expansive field of vision, especially beneficial for drivers wearing eyeglasses. Lightweight composite shell: Manufactured using a high-pressure molding process for strength and durability. Multi-density impact liner: Advanced multi-piece construction designed to manage impact energy. Comfort-Plus FR interior: Black fire-resistant fabric designed for comfort, moisture management, and durability. SRV-8 face shield: 3mm clear shield using the Bell SRV-1 pivot system. Adjustable upper air intakes: Manual lever ventilation controls allow drivers to manage airflow. Direct-flow chin bar vents: Additional ventilation for improved driving comfort. Integrated communication channels: Accommodates compatible radio microphones and hydration systems. M6 threaded terminals: Designed for installation of compatible FHR and HANS anchor hardware. Synthetic rubber shield gasket: Helps prevent dirt, water, and unwanted airflow from entering around the closed shield. Extended size range: Available from XX-Small through 4X-Large. Available colors: Gloss White and Matte Black. Extra-Large Eyeport for Maximum Racing Visibility One of the defining features of the Bell M.8 racing helmet is its exceptionally large eyeport. Designed to offer greater visibility than many traditional full-face racing helmets, the wide opening helps drivers maintain awareness of their surroundings, mirrors, gauges, and changing track conditions. The expanded eye opening is particularly appealing to drivers who wear prescription glasses or sunglasses, providing additional clearance compared with helmets featuring narrower eye openings. The M.8 is an excellent option for drivers transitioning from street driving to track events who want a full-face helmet with a more open, comfortable field of vision. Lightweight Composite Shell Construction The Bell M.8 uses a lightweight composite shell manufactured using a high-pressure molding process designed to provide consistent structural strength and durability. This construction balances protection and comfort, helping reduce unnecessary helmet weight during extended racing sessions. Its traditional Bell shell design provides the familiar appearance of the M-Series while incorporating updated materials and motorsport safety technology. Advanced Multi-Density Impact Protection Inside the composite shell, the Bell M.8 features an advanced multi-piece, multi-density impact-absorbing liner engineered to manage energy across different impact conditions. The liner uses multiple densities of energy-absorbing material to help manage forces during both lower- and higher-velocity impacts. Working together with the composite outer shell, this impact management system contributes to the helmet's Snell SA2020 protective performance. Comfort-Plus FR Interior for Driver Comfort The Bell M.8 features a black Comfort-Plus FR interior designed to provide a comfortable and supportive fit while incorporating fire-resistant materials appropriate for automotive motorsports. The interior fabric promotes moisture management and durability, helping drivers remain comfortable during demanding driving conditions. Multi-density interior foam provides additional fit support, helping keep the helmet secure during acceleration, braking, and cornering. Adjustable Ventilation for Improved Airflow The Bell M.8 incorporates a versatile ventilation system designed for different track conditions and driver preferences. Direct-flow chin bar vents allow incoming air to enter the front of the helmet, while manual lever-controlled upper intake vents can be opened or closed to regulate airflow. This configuration gives drivers greater control over ventilation during hot-weather events and cooler racing conditions. The adjustable ventilation system helps make the M.8 a versatile choice for both open-wheel and enclosed-cockpit applications, subject to event safety requirements. Bell SRV-8 Clear Shield with SRV-1 Pivot System The Bell M.8 comes equipped with a 3mm SRV-8 clear face shield designed to complement the helmet's oversized eyeport. The SRV-8 shield provides optical clarity and uses Bell's SRV-1 pivot system for opening, closing, and shield replacement. A synthetic rubber gasket around the shield opening helps reduce the entry of dirt, water, and unwanted air when the shield is closed. Replacement shields are available in different tint configurations to suit changing light conditions and driver preferences. Shop Bell SRV-8 Replacement Helmet Shields for compatible options. HANS and FHR Compatibility with Integrated M6 Terminals The Bell M.8 SA2020 helmet includes integrated M6 threaded terminals designed for mounting compatible frontal head restraint anchor hardware. These mounting points allow drivers to install approved HANS or other compatible FHR anchor systems without drilling or modifying the helmet shell. HANS/FHR anchor posts are sold separately unless specifically included in the selected product package. Always use manufacturer-approved mounting hardware and follow the installation instructions provided with the restraint system. Integrated Communication and Hydration System Channels The Bell M.8 includes integrated channels in the facepiece designed to accommodate compatible communication and hydration accessories. Drivers can add radio microphone components or drinking tube systems for applications requiring crew communication or hydration during extended driving sessions. These channels help simplify accessory installation and reduce interference with the helmet's interior fit. Communication and hydration accessories are sold separately. Bell M.8 SA2020 Helmet Specifications Manufacturer: Bell Racing Helmets Model: M.8 / M8 Helmet Type: Full-face automotive racing helmet Certification: Snell SA2020 Shell Construction: Lightweight composite Shell Manufacturing: High-pressure molding process Impact Liner: Multi-piece, multi-density energy-absorbing construction Interior: Black Comfort-Plus FR fire-resistant fabric Shield: SRV-8 clear polycarbonate, 3mm Shield Pivot: Bell SRV-1 Eyeport: Extra-large, wide-view design Ventilation: Direct-flow chin bar vents and adjustable upper air intakes FHR/HANS Mounting: Integrated M6 threaded terminals Accessory Compatibility: Radio microphone and hydration system channels Shield Seal: Synthetic rubber gasket Colors: Gloss White and Matte Black Sizes: XXS, XS, S, M, L, XL, 2XL, 3XL, 4XL Bell M.8 Racing Helmet Available Colors The Bell M.8 SA2020 is available in two traditional motorsport finishes: Gloss White: Classic Bell racing helmet appearance with a bright, clean finish. Matte Black: Understated motorsport styling with a non-gloss exterior finish. Both options feature the same helmet construction, certification, and core performance features. Who Should Choose the Bell M.8 Helmet? The Bell M.8 is especially well suited for drivers who prioritize visibility, helmet comfort, and a versatile full-face design. Eyeglass Wearers: Large eyeport provides additional space and visibility. Track-Day Drivers: Comfortable construction for HPDE and performance driving. Road Racers: Full-face protection and HANS-compatible mounting points. Autocross Drivers: Wide field of vision and a comfortable interior. Endurance Racers: Compatible communication and hydration accessory channels. Driving Instructors: Broad visibility for monitoring track surroundings and students. The M.8 may also be suitable for other motorsport disciplines when the competition rules permit its certification and helmet configuration. Bell M.8 Helmet Fit and Measurement Guide Bell M.8 SA2020 Racing Helmet Frequently Asked Questions What certification does the Bell M.8 helmet have? The Bell M.8 is certified to the Snell SA2020 automotive racing helmet standard. Always confirm that SA2020 helmets remain eligible for your specific racing organization and event. Is the Bell M.8 a good helmet for drivers who wear glasses? Yes. One of the M.8's main advantages is its extra-large eyeport, which provides additional clearance and visibility for drivers who wear eyeglasses. Does the Bell M.8 come with a face shield? Yes. The helmet comes equipped with a 3mm clear Bell SRV-8 shield using the SRV-1 pivot system. Does the Bell M.8 have HANS mounting points? Yes. Integrated M6 threaded terminals allow installation of compatible HANS or other approved FHR anchor hardware. Are HANS anchor posts included? The helmet includes the threaded mounting terminals. Anchor posts are sold separately unless specifically included in the purchased package. Can I install a radio system in the Bell M.8? Yes. Integrated facepiece channels accommodate compatible radio microphone systems. Radio components are sold separately. Can I install a drinking tube in the Bell M.8? Yes. The helmet includes integrated channels designed to accommodate compatible hydration system components. Does the Bell M.8 have adjustable ventilation? Yes. The helmet features direct-flow chin bar ventilation and manually adjustable upper air intake vents. What colors are available? The Bell M.8 SA2020 is available in Gloss White and Matte Black. What sizes does the Bell M.8 come in? The M.8 offers Bell's extended size range from XX-Small through 4X-Large. Check the manufacturer's sizing information for the correct fit. Can I use the Bell M.8 SA2020 for track days? Yes, provided the track-day organizer accepts Snell SA2020 helmets. Confirm current helmet certification requirements before attending an event. Does the Bell M.8 have FIA 8859-2015 certification? The standard composite Bell M.8 described here is listed with Snell SA2020 certification. Do not confuse it with the Bell M.8 Carbon, which is a separate model with different certification specifications. What replacement shield fits the Bell M.8? The Bell SRV-8 shield is designed for the M.8 and uses the SRV-1 pivot system. Always verify the exact shield version when ordering. Why Buy the Bell M.8 SA2020 from Competition Motorsport? Competition Motorsport specializes in premium racing safety equipment for professional racers, amateur competitors, track-day enthusiasts, and performance driving instructors. The Bell M.8 SA2020 combines a lightweight composite shell, exceptional visibility, adjustable ventilation, fire-resistant interior materials, and compatibility with popular racing accessories. Its classic styling and practical features make it an excellent option for drivers looking for a versatile full-face racing helmet.

B2 Icon SA2020 Open-Face Racing Helmet   Classic Design, Modern Motorsport Protection The B2 Icon SA2020 Open-Face Racing Helmet combines classic motorsport styling with modern safety engineering, lightweight construction, and outstanding driver visibility. Designed for racers who prefer the freedom and comfort of an open-face helmet, the B2 Icon delivers a practical balance of protection, performance, and affordability. Featuring a lightweight composite shell, advanced multi-density impact-absorbing liner, adjustable visor peak, and fire-resistant interior materials, the B2 Icon is an excellent option for autocross, track days, HPDE instruction, vintage racing, and other automotive motorsports where open-face helmets are permitted. With Snell SA2020 certification and integrated M6 threaded terminals for compatible head and neck restraint anchors, the B2 Icon offers essential racing safety features in a straightforward, driver-focused design. B2 Icon SA2020 Racing Helmet Features Snell SA2020 Certified: Meets recognized automotive racing helmet safety requirements. Lightweight Composite Shell: Durable construction engineered for impact protection and driver comfort. Advanced Multi-Density Liner: Multi-piece energy-absorbing construction designed to manage impact forces. Open-Face Design: Wide field of vision and increased facial openness compared with full-face racing helmets. Adjustable Visor Peak: Helps shield the driver's eyes from sunlight and glare. Light Smoke Anti-Glare Strip: Integrated into the peak assembly to help improve daytime visibility. Integrated M6 Terminals: Factory-installed threaded mounting points for compatible FHR and HANS anchor hardware. Fire-Resistant Interior: Comfortable lining designed for automotive motorsport applications. Comfort-Focused Fit: Designed to remain secure during demanding driving sessions. Available Colors: White, Metallic Black, and Metallic Silver. Available Sizes: Small, Medium, Large, and X-Large. Lightweight Composite Shell Construction The B2 Icon racing helmet features a lightweight composite shell engineered to provide strength, durability, and impact protection without unnecessary bulk. Managing helmet weight is important during extended driving sessions, particularly under repeated braking and cornering loads. The B2 Icon's composite construction helps balance protective performance with everyday racing comfort. Its traditional open-face profile delivers classic motorsport styling while incorporating modern materials and manufacturing techniques. Advanced Multi-Density Impact Protection Inside the composite shell, the B2 Icon uses an advanced multi-piece, multi-density impact-absorbing liner designed to manage impact energy. The liner incorporates different material densities to help absorb energy across varying impact conditions. Combined with the outer composite shell, this construction contributes to the helmet's Snell SA2020 protective performance. This engineered impact-management system provides an important foundation for the helmet's motorsport safety certification. Snell SA2020 Certified for Automotive Racing The B2 Icon is certified to the Snell SA2020 automotive racing helmet standard, a recognized safety certification used across many motorsport disciplines. Snell SA2020 certification indicates that the helmet design meets the applicable testing and performance requirements established by the Snell Memorial Foundation. The B2 Icon is suitable for many racing and performance-driving applications where Snell SA2020 open-face helmets remain accepted. Important: Racing organizations establish their own helmet certification and eligibility requirements. Always verify that Snell SA2020 helmets and open-face designs are permitted for your specific event, vehicle, and racing series. Open-Face Design for Maximum Driver Visibility One of the biggest advantages of the B2 Icon Open-Face Racing Helmet is its expansive field of vision. Unlike full-face helmets, the Icon does not include a chin bar or full-face shield, allowing drivers to enjoy greater facial openness and convenient communication with instructors, crew members, and passengers. This design makes the helmet especially appealing for autocross competitors, HPDE participants, driving instructors, and drivers of closed-cockpit race cars. The open-face configuration can also be convenient for drivers who wear prescription glasses or prefer using separate eye protection. Safety Note: Open-face helmets offer less facial coverage than full-face helmets. Consider your vehicle, racing environment, and sanctioning-body requirements when choosing your helmet. Adjustable Visor Peak with Light Smoke Anti-Glare Strip The B2 Icon includes an adjustable visor peak with an integrated light smoke anti-glare strip designed to help manage sunlight during daytime driving. Drivers can position the peak to help reduce glare and improve forward visibility in bright conditions. The visor peak is particularly useful during autocross, road racing, and track-day events when low-angle sunlight can affect visibility. The peak assembly can also be removed or serviced using compatible B2 replacement parts. Integrated M6 Terminals for HANS and FHR Compatibility The B2 Icon includes factory-installed M6 threaded terminals designed for attaching compatible frontal head restraint hardware. These mounting points allow drivers to install approved HANS or other compatible FHR anchor systems without drilling new holes into the helmet shell. HANS/FHR anchor posts are not included with the standard helmet and must be purchased separately. Always use compatible mounting hardware and follow the helmet and restraint manufacturers' installation instructions. Fire-Resistant Interior for Racing Comfort The B2 Icon features fire-resistant interior materials designed for use in automotive motorsports. The interior provides a comfortable contact surface while supporting a secure helmet fit during acceleration, braking, and cornering. Its comfort-focused design makes the B2 Icon a practical choice for longer track sessions, driver instruction, and repeated competition runs. B2 Icon SA2020 Racing Helmet Specifications Manufacturer: B2 Helmets Model: Icon Helmet Type: Open-face automotive racing helmet Safety Certification: Snell SA2020 Shell Construction: Lightweight composite Impact Liner: Advanced multi-piece, multi-density energy-absorbing construction Interior: Fire-resistant motorsport helmet lining Visor: Adjustable peak with light smoke anti-glare strip FHR Compatibility: Integrated M6 threaded terminals HANS Anchor Posts: Sold separately Colors: White, Metallic Black, Metallic Silver Sizes: Small, Medium, Large, X-Large Primary Application: Automotive motorsports Ideal Motorsport Applications for the B2 Icon The B2 Icon is designed for drivers seeking a comfortable, affordable, and certified open-face racing helmet. Autocross: Wide visibility and lightweight comfort during timed competition runs. Track Days and HPDE: Practical design for recreational performance driving and driver education. Club Racing: Suitable for events permitting Snell SA2020 open-face helmets. Vintage Racing: Traditional open-face styling with modern protective construction. Driver Instruction: Easier verbal communication with students and passengers. Rally and Rallycross: Wide field of vision for approved motorsport applications. Time Trials: Lightweight construction and comfortable fit for performance driving. Always verify current helmet requirements with your motorsport organization before participating. B2 Icon vs. Full-Face Racing Helmets Choosing between an open-face and full-face racing helmet depends on your vehicle, driving environment, personal preferences, and competition requirements. The B2 Icon open-face helmet offers a wider facial opening, improved access for communication, and a classic motorsport appearance. A full-face racing helmet adds a protective chin bar and typically a full face shield, providing additional facial coverage against certain impacts, debris, and environmental exposure. Drivers should consider the potential risks of their motorsport discipline and select a helmet design appropriate for the application. B2 Icon Helmet Sizing Chart A properly fitted helmet should feel snug, remain stable during head movement, and avoid painful pressure points. For additional help choosing a racing helmet, visit the Competition Motorsport Auto Racing Helmet Buyer's Guide. B2 Icon SA2020 Frequently Asked Questions What safety certification does the B2 Icon have? The B2 Icon is certified to the Snell SA2020 automotive racing helmet standard. Always confirm that this certification remains accepted by your racing organization. Is the B2 Icon a full-face or open-face helmet? The B2 Icon is an open-face racing helmet without a full chin bar or full-face shield. Does the B2 Icon come with HANS anchors? The helmet includes factory-installed M6 threaded terminals for compatible head and neck restraint anchors. The anchor posts themselves are sold separately. Does the B2 Icon have an adjustable visor? Yes. The helmet includes an adjustable peak with a light smoke anti-glare strip to help reduce sunlight interference. Can the visor peak be removed? Yes. The peak assembly can be removed or serviced with appropriate hardware and compatible replacement components. What material is the B2 Icon shell made from? The B2 Icon features a lightweight composite shell and a multi-piece, multi-density impact-absorbing liner. Does the B2 Icon have a fire-resistant interior? Yes. The helmet incorporates fire-resistant interior materials designed for automotive motorsports use. Can I use the B2 Icon for autocross? Yes, provided your event organizer accepts Snell SA2020 open-face racing helmets. Is the B2 Icon good for HPDE and track days? The B2 Icon is a popular option for HPDE and track-day driving where an open-face helmet is permitted. Can I wear eyeglasses with the B2 Icon? Its open-face construction provides additional room for many eyeglass styles. Proper helmet fit should always be checked while wearing your glasses. Does the B2 Icon have built-in radio communication electronics? No integrated radio system is specified for the standard B2 Icon. Communication accessories may require a separate compatible installation. What colors and sizes are available? The B2 Icon comes in White, Metallic Black, and Metallic Silver, with sizes Small through X-Large. Availability depends on current inventory. Is the B2 Icon Snell SA2025 certified? No. This particular B2 Icon is certified to the Snell SA2020 standard, not SA2025. Always review your racing organization's current certification requirements. Complete Your Racing Helmet Setup Protect your B2 Icon helmet between events with the Competition Motorsport Performance Racing Helmet Bag. Whether you're attending your next HPDE event, preparing for autocross competition, or instructing at the track, the B2 Icon provides a versatile combination of driver comfort, visibility, and motorsport safety features.