Castrol React SRF Synthetic Racing Brake Fluid (1000 ml)
from $146.00
Castrol React SRF Racing Brake Fluid
Ultra-High Wet Boiling Point Makes Castrol SRF A Standout
Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance.
The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids!
Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications.
Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid.
Castrol React SRF Racing Brake Fluid Typical Properties:
Dry Boiling Point: 590°F (310°C)
Wet Boiling Point: 518°F (270°C)
Superior anti-vapor lock properties
One-liter (1000ml) bottle
Cobalt AP9 Brake Pads
$488.00
Cobalt AP9 Front Brake Pads
Cobalt AP9 Front Brake Pads Fitment Guide
Make
Model
Build (Year)
Front
Rear
Caterham
SP/300.R
2012 -
X
X
Lotus
Exige V6 Sport 360 Cup
2015 -
X
Lotus
Exige Sport Cup
2006 -
X
Fits the Following Caliper
Make
Type
Remarks
Shape No.
AP Racing
CP7600 D46
14.4mm,16mm
4349, 8076
Cobalt D491 Brake Pads
$357.00
Cobalt D491 Brake Pads
Fitment Guide Cobalt D491 Brake Pads (FMSI D491)
Make
Model
Build (Year)
Front
Rear
Lotus
Elise and Club Racer
1996 +
X
Lotus
Exige
2003 +
X
Lotus
Exige V6 Sport 360 Cup
2015 +
X
Lotus
Exige Sport Cup
2006 +
X
Cobalt Brake Compounds
Ferodo FCP1560 Brake Pads
from $495.00
Ferodo FCP1560 Brake Pads
Ferodo FCP1560 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Lotus
Elise and Club Racer
96 -
X
Lotus
Exige
03 -
X
Lotus
Exige V6 Sport 360 Cup
15 -
X
Lotus
Exige Sport Cup
06 -
X
Opel
Speedster 2.2i 16V
00 - 05
X
Ferodo DS3.12 Brake Compound Details
The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands.
The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup.
The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most.
Maximum fade resistance in the Ferodo range
High friction and strong initial bite
Very consistent braking response at track temperatures
Excellent durability in endurance racing use
Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency.
Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads.
Ferodo DS1.11 Brake Compound Details
The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel.
The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency.
This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel.
Exceptional fade resistance for track use
Long wear characteristics in endurance-style driving
Progressive, controllable pedal feel
Excellent choice for HPDE and racing applications
Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use.
Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners.
Ferodo DS2500 Compound Details
Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat.
The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice.
The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars.
Strong cold bite for street use
Low noise when properly bedded
Excellent fade resistance for a dual-purpose pad
Great match for performance street tires
Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement.
Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad.
Ferodo DS3000 Brake Compound Details
The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear.
Ferodo FCP1560 Comparison Chart
Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see.
Ferodo FCP1560 Coefficient of Friction (Mu) Comparison Chart
In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged.
Ferodo FCP1560 Operating Temperature Comparison Chart
**Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**
Ferodo FRP3085 Brake Pads
from $354.00
Ferodo FRP3085 Brake Pads
Ferodo FRP3085 Brake Pad Fitment Guide
Make
Model
Engine / Variant
Years
Front Pad Shape
Rear Pad Shape
Lotus
Exige (SCC_) Cup 240
1.8
2006–2012
FRP3056 / FRP3085*
FCP1560
Lotus
Exige V6 Sport Cup
3.5 V6
2015+
FRP3085
FCP1560
Ferodo DS1.11 Brake Compound Details
The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel.
The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency.
This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel.
Exceptional fade resistance for track use
Long wear characteristics in endurance-style driving
Progressive, controllable pedal feel
Excellent choice for HPDE and racing applications
Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use.
Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners.
Ferodo DSUNO Brake Compound Details
For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures.
Ferodo DS2500 Compound Details
Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat.
The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice.
The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars.
Strong cold bite for street use
Low noise when properly bedded
Excellent fade resistance for a dual-purpose pad
Great match for performance street tires
Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement.
Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad.
Ferodo DS3000 Brake Compound Details
The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear.
Ferodo FRP3085 Comparison Chart
Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see.
Ferodo FRP3085 Coefficient of Friction (Mu) Comparison Chart
In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged.
Ferodo FRP3085 Operating Temperature Comparison Chart
**Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**
HALO P1 Advanced High Performance Brake Fluid (590 ml)
$110.00
HALO P1 High Performance Brake Fluid
The World's Most Advanced Racing Brake Fluid
Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide.
Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times.Sold in 590 ml (20 fl. oz.) bottles.
Features & Benefits That'll Make You Weep Tears of Joy
Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners.
Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot).
World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard.
Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills.
What Makes Halo P1 The Secret Weapon?
While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures.
FAQs That'll Clear the Air
Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have:
Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended.
How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb.
The Call to Action You've Been Waiting For
So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.
Pagid 4349 Racing Brake Pads
from $541.00
Pagid Racing Brake Pad Shape 4349
Pagid 4349 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Caterham
SP/300.R
2012 -
X
X
Lotus
Exige V6 Sport 360 Cup
2015 -
X
Lotus
Exige Sport Cup
2006 -
X
Fits the Following Caliper:
Make
Type
Remarks
Shape No.
AP Racing
CP7600 D46
14.4mm,16mm
4349, 8076
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
RS 14 Compound:
The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying.
RSL 29 Compound:
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid RSC 1 Compound (Ceramic Rotors Only)
A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.
Pagid RSL 1 Compound
Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.
Pagid RST 1 Compound
Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.
Pagid RST 2 Compound
The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line
Pagid RST 3 Compound:
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Pagid Racing 1682 Brake Pads
from $428.00
Pagid Racing Brake Pad Shape No. 1682
Fitment Guide Pagid 1682 Brake Pad (FMSI D491)
Make
Model
Build (Year)
Front
Rear
Lotus
Elise and Club Racer
1996 +
X
Lotus
Exige
2003 +
X
Lotus
Exige V6 Sport 360 Cup
2015 +
X
Lotus
Exige Sport Cup
2006 +
X
Opel
Speedster 2.2i 16V
2000 - 05
X
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid Racing 1682 Brake Pad RS 14 Compound
The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying.
Pagid Racing 1682 Brake Pad RS 42 Compound
RS 42 is a low metallic resin bonded material containing steel and aramid fibers. The characteristics make this material appropriate for small formula cars. Pagid RS 42 is regarded as a classic rally racing brake pad compound, as well as being very popular in small formula and touring cars.
Pagid Racing 1682 Brake Pad Pagid RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Performance Friction PFC 0491 Brake Pads
$361.00
Performance Friction PFC 0491 Brake Pads
Fitment Guide PFC 0491 Brake Pads (FMSI D491)
Make
Model
Build (Year)
Front
Rear
Lotus
Elise and Club Racer
1996 +
X
Lotus
Exige
2003 +
X
Lotus
Exige V6 Sport 360 Cup
2015 +
X
Lotus
Exige Sport Cup
2006 +
X
Performance Friction PFC 0491 Brake Compounds and Performance
The Performance Friction PFC 0491 racing brake pad combines specialized backing plate geometry with the proven endurance racing characteristics of PFC Compound 08. Designed for compatible high-performance brake calipers, the PFC 0491 measures 126 mm wide with a 40 mm friction material depth and 13 mm friction material thickness, excluding the steel backing plate.
Available from Competition Motorsport in PFC 08 racing compound, the 0491 is an excellent option for drivers seeking progressive braking response, precise modulation, and consistent stopping power during demanding track sessions and motorsport competition. Whether preparing for endurance racing, club racing, or advanced HPDE events, selecting the correct brake pad shape and friction compound is essential for reliable braking performance.
PFC 0491 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 0491
Overall Width: 126 mm
Friction Material Depth: 40 mm
Friction Material Thickness: 13 mm (excluding backing plate)
Available Compound: PFC 08
Compound Type: Endurance racing friction material
Intended Use: Compatible motorsport and high-performance brake systems
The PFC 0491 features a distinctive backing plate with a raised central mounting tab, two lateral retaining holes, and a curved friction surface divided by a central groove. Its specialized profile makes accurate pad shape identification essential when replacing existing racing brake pads or evaluating alternative friction compounds.
PFC 08 Racing Compound – Endurance Performance and Consistent Modulation
Performance Friction Compound 08 is a proven endurance racing friction material developed for consistent braking response during extended periods of demanding track use. Known for its progressive initial bite, excellent modulation, and favorable wear characteristics, PFC 08 is particularly attractive to drivers seeking predictable braking performance throughout long racing sessions.
Compound 08 features friction characteristics that increase as operating temperature rises while maintaining favorable wear performance at elevated temperatures. This combination of temperature-responsive friction, durability, and controlled braking response makes it an excellent choice for endurance racing, club racing, and advanced track applications.
Benefits of PFC 08 Racing Brake Compound
Endurance Racing Performance: Developed for demanding long-distance motorsport competition.
Progressive Initial Bite: Predictable braking response that supports precise driver control.
Excellent Modulation: Smooth, controllable braking characteristics for managing deceleration and brake release.
Temperature-Responsive Friction: Friction increases as operating temperature rises.
Favorable Wear Characteristics: Designed for reduced wear during elevated-temperature operation.
Consistent Pedal Response: Supports predictable braking behavior during extended track sessions.
Why Choose Performance Friction PFC 0491 Brake Pads?
Performance Friction has developed a strong reputation in professional motorsport through advanced racing brake friction materials and complete braking systems. The PFC 0491 combines a specialized backing plate with Compound 08's endurance-focused friction characteristics.
Its compact 126 mm width, 40 mm friction material depth, and 13 mm friction material thickness make it a specific replacement option for compatible performance brake calipers.
Precision PFC 0491 backing plate geometry
126 mm overall width
40 mm friction material depth
13 mm friction material thickness
PFC 08 endurance racing compound
Distinctive central mounting tab and lateral retaining holes
Designed for compatible high-performance brake calipers
PFC 0491 Brake Pad Fitment and Compatibility
The Performance Friction 0491 pad shape is intended for brake calipers requiring its specific backing plate geometry, retaining-hole locations, and friction material dimensions.
Before ordering, compare your existing brake pads with the PFC 0491 technical drawing. Verify the 126 mm overall width, 40 mm friction material depth, 13 mm friction material thickness, and backing plate mounting geometry.
The 13 mm thickness measurement refers exclusively to the friction material and excludes the steel backing plate. It should not be confused with the complete assembled brake pad thickness.
Vehicle make and model alone may not establish compatibility, particularly when aftermarket racing calipers or optional performance brake packages are installed.
Frequently Asked Questions About PFC 0491 Brake Pads
What compound is available for PFC 0491 brake pads?
Competition Motorsport offers the Performance Friction 0491 pad shape in PFC Compound 08, an endurance-focused racing friction material.
What are the benefits of PFC Compound 08?
PFC 08 is known for progressive braking response, excellent modulation, temperature-responsive friction, and favorable wear characteristics during demanding endurance racing applications.
Are PFC 0491 brake pads suitable for endurance racing?
Yes, when the pad shape is compatible with the vehicle's brake calipers and the braking system is appropriate for the selected compound. PFC 08 is specifically developed for endurance racing applications.
Does the 13 mm pad thickness include the backing plate?
No. The 13 mm measurement refers to the friction material thickness only. The steel backing plate is excluded.
How do I confirm PFC 0491 brake pad fitment?
Compare the PFC 0491 technical drawing with your existing brake pads. Confirm the 126 mm overall width, 40 mm friction material depth, 13 mm friction thickness, retaining-hole locations, and backing plate geometry.
Can PFC 0491 racing brake pads be used on the street?
PFC 08 is a competition-oriented friction material primarily intended for motorsport use. Racing brake pads may produce additional noise and dust and may not provide ideal braking characteristics at normal street operating temperatures.
Buy PFC 0491 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, high-performance braking components, and professional motorsport equipment for HPDE enthusiasts, track-day drivers, club racers, and professional race teams.
Order PFC 0491 brake pads in Compound 08 for your compatible braking system, or contact our motorsports specialists for assistance confirming fitment and selecting the appropriate racing brake components for your application.
Performance Friction PFC 7834 Brake Pad
$367.00
Performance Friction PFC 7834 Brake Pad
Performance Friction PFC 7834 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Caterham
SP/300.R
2012 -
X
X
Lotus
Exige V6 Sport 360 Cup
2015 -
X
Lotus
Exige Sport Cup
2006 -
X
Fits the Following Caliper:
Make
Type
Remarks
Shape No.
AP Racing
CP7600 D46
14.4mm,16mm
4349, 8076
The Performance Friction PFC 7834 racing brake pad combines precision backing plate geometry with the proven competition performance of PFC Compound 01. Designed for compatible high-performance brake calipers, the PFC 7834 features a 113 mm overall width, 42 mm friction material depth, and 16 mm friction material thickness, excluding the steel backing plate.
Available from Competition Motorsport in PFC 01 racing compound, the 7834 is an excellent choice for drivers seeking strong initial bite, consistent brake torque, and predictable stopping power during demanding track sessions and motorsport competition. Whether preparing for sprint racing, club racing, or advanced HPDE events, selecting the correct pad shape and friction material is essential for reliable braking performance.
PFC 7834 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 7834
Overall Width: 113 mm
Friction Material Depth: 42 mm
Friction Material Thickness: 16 mm (excluding backing plate)
Available Compound: PFC 01
Compound Type: Sprint and medium-distance racing friction material
Intended Use: Compatible motorsport and high-performance brake systems
The PFC 7834 features a distinctive backing plate with two upper retaining holes, a curved upper friction edge, and a shallow concave lower profile. Its specialized geometry makes accurate pad shape identification essential when replacing existing racing brake pads or selecting alternative friction materials.
PFC 01 Racing Compound – Strong Initial Bite and Consistent Brake Torque
Performance Friction Compound 01 is a high-performance racing friction material developed for sprint and medium-distance competition. Known for its strong initial bite, consistent friction characteristics, and excellent resistance to brake fade at elevated temperatures, PFC 01 is a proven choice for demanding motorsport braking applications.
Compound 01 provides an aggressive initial braking response while maintaining relatively stable brake torque as operating temperatures increase. This helps drivers achieve repeatable deceleration and predictable pedal response during repeated heavy braking.
Its combination of high friction, consistent performance, and thermal stability makes PFC 01 particularly attractive for sprint racing, club racing, and advanced track applications where maximum braking performance is a priority.
Benefits of PFC 01 Racing Brake Compound
Strong Initial Bite: Aggressive braking response for rapid deceleration.
Consistent Brake Torque: Designed to maintain predictable friction characteristics across demanding racing conditions.
High-Temperature Performance: Excellent resistance to brake fade during repeated heavy braking.
Sprint Racing Capability: Developed for demanding sprint and medium-distance motorsport competition.
Precise Modulation: Supports controlled braking and predictable pedal response.
Competition-Focused Design: Engineered for high-performance racing brake systems.
Why Choose Performance Friction PFC 7834 Brake Pads?
Performance Friction has established a strong reputation in professional motorsport through the development of advanced racing brake friction materials and complete braking systems. The PFC 7834 combines specialized backing plate geometry with Compound 01's high-friction racing characteristics.
Its compact 113 mm width, 42 mm friction material depth, and 16 mm friction material thickness make it a specific replacement option for compatible performance brake calipers.
Precision PFC 7834 backing plate geometry
113 mm overall width
42 mm friction material depth
16 mm friction material thickness
PFC 01 high-performance racing compound
Distinctive upper retaining holes and curved friction profile
Designed for compatible motorsport brake calipers
PFC 7834 Brake Pad Fitment and Compatibility
The Performance Friction 7834 brake pad is intended for brake calipers requiring its specific backing plate geometry, retaining-hole locations, and friction material dimensions.
Before ordering, compare your existing brake pads with the PFC 7834 technical drawing. Verify the 113 mm overall width, 42 mm friction material depth, 16 mm friction material thickness, and backing plate mounting geometry.
The 16 mm thickness measurement refers exclusively to the friction material and excludes the steel backing plate. It should not be confused with the complete assembled brake pad thickness.
Vehicle make and model alone may not establish compatibility, particularly when aftermarket racing calipers or optional performance brake packages are installed.
Frequently Asked Questions About PFC 7834 Brake Pads
What compound is available for PFC 7834 brake pads?
Competition Motorsport offers the Performance Friction 7834 pad shape in PFC Compound 01, a high-performance racing friction material developed for sprint and medium-distance competition.
What are the benefits of PFC Compound 01?
PFC 01 is known for strong initial bite, consistent brake torque, high-temperature performance, and excellent resistance to brake fade during demanding motorsport applications.
Are PFC 7834 brake pads suitable for sprint racing?
Yes, when the pad shape is compatible with the vehicle's brake calipers and the braking system is appropriate for the selected compound. PFC 01 is specifically developed for sprint and medium-distance racing applications.
Does the 16 mm pad thickness include the backing plate?
No. The 16 mm measurement refers exclusively to the friction material thickness. The steel backing plate is excluded.
How do I confirm PFC 7834 brake pad fitment?
Compare the PFC 7834 technical drawing with your existing brake pads. Confirm the 113 mm overall width, 42 mm friction material depth, 16 mm friction thickness, retaining-hole locations, and backing plate geometry.
Can PFC 7834 racing brake pads be used on the street?
PFC 01 is a competition-oriented friction material primarily intended for motorsport use. Racing brake pads may produce additional noise and dust and may not provide ideal braking characteristics at normal street operating temperatures.
Buy PFC 7834 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, high-performance braking components, and professional motorsport equipment for HPDE enthusiasts, track-day drivers, club racers, and professional race teams.
Order PFC 7834 brake pads in Compound 01 for your compatible braking system, or contact our motorsports specialists for assistance confirming fitment and selecting the appropriate racing brake components for your application.