Racetech Racing Seats

Racetech RT9129 Carbon Kevlar Racing Seat from $15,478.00

Racetech RT9129 Lightweight Racing Seat The Racetech RT9129 Lightweight Racing Seat combines professional motorsport safety, advanced carbon/Kevlar construction, and exceptional driver support in one of the lightest racing seats homologated to the FIA 8862-2009 Advanced Racing Seat standard. Developed for international circuit racing and demanding endurance competition, the RT9129 delivers outstanding structural strength without the unnecessary weight of traditional racing seat designs. Built on Racetech's championship-proven 129 Series platform, the RT9129 features a lightweight carbon/Kevlar composite shell, integrated head restraints, energy-absorbing foam, and a reinforced rear mounting structure. With shell weights ranging from just 8.1 to 9.0 kg (approximately 18–20 lb), depending on size, the RT9129 is engineered for drivers who demand maximum protection, precise vehicle feedback, and reduced weight. Available in Standard, Tall, Wide, and Wide/Tall configurations, the Racetech RT9129 accommodates different driver sizes and cockpit layouts. FIA-approved side and rear mounting brackets are included, providing the hardware required for the seat's structural mounting configuration. Vehicle-specific installation hardware or fabrication may still be necessary. Professional FIA 8862-2009 Racing Seat with Lightweight Carbon/Kevlar Construction The Racetech RT9129 is designed for serious motorsport applications where occupant protection, structural stability, and driver comfort are essential. Its advanced carbon/Kevlar composite shell provides exceptional strength while significantly reducing weight compared with conventional racing seats. The RT9129 incorporates integrated head restraints to help limit lateral head movement during an impact, while strategically positioned energy-absorbing foam provides additional occupant protection. Large harness openings accommodate multi-point racing harnesses, and its FHR-compatible design works with properly fitted head and neck restraint systems. Unlike conventional side-mounted racing seats, the RT9129 is engineered with an integrated rear mounting structure. This additional attachment point increases seat rigidity, helps maintain proper driver positioning, and provides a more direct connection between the seat and vehicle chassis. Important FIA Installation Requirement: To comply with FIA 8862-2009 homologation, the Racetech RT9129 must be securely back-mounted to the vehicle's roll cage at shoulder level using the approved mounting configuration. Side mounting alone does not satisfy the FIA installation requirements for this seat. Racetech RT9129 Lightweight Racing Seat Features FIA 8862-2009 Homologated: Engineered and approved to the FIA Advanced Racing Seat standard for high-level motorsport competition. Lightweight Carbon/Kevlar Shell: Advanced composite construction delivers exceptional strength while maintaining shell weights from approximately 18 to 20 lb. Integrated Head Restraints: Extended head-support wings provide additional lateral restraint and protection during high-impact events. Energy-Absorbing Foam: Strategically positioned protective foam helps manage impact forces and enhance occupant safety. Required Structural Back Mount: Reinforced rear mounting system connects the seat to the roll cage to improve rigidity, stability, and safety. Mounting Brackets Included: Compatible Racetech side and rear mounting brackets are supplied with the seat. FHR / HANS Compatible: Designed for use with approved frontal head restraint systems and properly installed racing harnesses. Up to 6-Point Harness Compatibility: Large harness openings accommodate common 4-, 5-, and 6-point racing harness configurations. Integrated Driver Cooling Duct: Rear air ducting allows cool air to be directed toward the driver's lower back during extended racing sessions. Fire-Retardant Seat Cover: Black racing upholstery provides a durable, motorsport-focused seating surface. Grey Suede Wear Patches: Reinforced upholstery areas help resist abrasion from repeated driver entry and exit. Multiple Seat Sizes: Standard, Tall, Wide, and Wide/Tall configurations accommodate different driver proportions. Professional Motorsport Design: Suitable for endurance racing, international circuit competition, GT racing, and other applications requiring FIA 8862-approved seating. CAD Models Available: Digital seat models can be requested to assist with cockpit planning and installation. Racetech RT9129 Lightweight Racing Seat Specifications Technical Specifications Specification Details Manufacturer Racetech Model RT9129 Lightweight Racing Seat Seat Series Racetech 129 Series Product Type Advanced Motorsport Racing Seat FIA Homologation FIA 8862-2009 Shell Material Carbon/Kevlar Composite Shell Weight 8.1–9.0 kg (17.9–19.8 lb), depending on size Shell Finish Clear Self-Finish Seat Cover Black Fire-Retardant Fabric Wear Patches Grey Suede Leather Head Restraint Integrated Lateral Head Restraints FHR / HANS Compatible Yes Harness Compatibility 4-, 5-, and 6-Point Racing Harnesses Side Mount Hole Centers 295 mm Back Mount Hole Centers 250 mm Zinc-Plated Mounting Bolt Torque 30 Nm / 22 ft-lb Rear Air Ducting Yes — Driver's Lower Back Back Mount Required Yes, for FIA 8862-2009 Compliance Available Sizes Standard, Tall, Wide, Wide/Tall Manufacturing Hand-Built in New Zealand Racetech RT9129 Seat Sizes and Weight Comparison The Racetech RT9129 is available in four size configurations to accommodate different driver heights, hip widths, and cockpit dimensions. Selecting the correct racing seat is essential for proper harness alignment, driver support, and safety. Model Configuration Shell Weight Approx. Total Weight RT9129HRW Standard 8.7 kg / 19.2 lb 10.2 kg / 22.5 lb RT9129THR Tall 9.0 kg / 19.8 lb 10.5 kg / 23.1 lb RT9129WHR Wide 9.0 kg / 19.8 lb 10.5 kg / 23.1 lb RT9129WTHRL Wide/Tall 8.1 kg / 17.9 lb 9.6 kg / 21.2 lb Weights are manufacturer specifications and may vary slightly by seat configuration. Always verify vehicle clearance and driver fit before installation. FIA 8862-2009 Racing Seat Mounting Requirements The Racetech RT9129 uses a reinforced mounting design that requires both side mounting and structural rear mounting for FIA-compliant installation. Side Mounting: Racetech RTB1009M mounting brackets are supplied for approved seat configurations. Rear Mounting: Racetech RTB1006B rear mounting brackets are supplied for applicable standard configurations. Wide/Tall applications may require the RTB1006BW configuration specified by the manufacturer and FIA homologation documentation. Mandatory Rear Support: The seat must be securely attached to the roll cage at shoulder level using the correct homologated mounting hardware and installation geometry. Rear mounting improves structural stability during an impact while helping minimize unwanted seat movement. This additional rigidity can also improve driver feedback and reduce fatigue during extended racing sessions. Installation Note: Always follow Racetech's mounting instructions, the applicable FIA homologation documentation, and your racing organization's regulations. Use the approved mounting brackets associated with the specific seat model. Racetech RT9129 Racing Seat Size Chart Use the Racetech RT9129 racing seat size charts below to compare the available Standard, Tall, Wide, and Wide/Tall seat configurations. Review shoulder width, hip clearance, seat height, and overall shell dimensions to determine which model best fits your body and race vehicle. Racetech RT9129 Seat Comparison Chart Racetech RT9129 Racing Seat Dimensions Racetech RT9129 Lightweight Racing Seat FAQs Is the Racetech RT9129 racing seat FIA approved? Yes. The Racetech RT9129 series includes models homologated to the FIA 8862-2009 Advanced Racing Seat standard. Always verify the specific model's homologation label, validity date, approved brackets, and installation requirements before competition. How much does the Racetech RT9129 lightweight racing seat weigh? The RT9129 carbon/Kevlar shell weighs approximately 8.1 to 9.0 kg (17.9 to 19.8 lb), depending on the selected size. Total seat weights vary by configuration. Does the Racetech RT9129 include mounting brackets? Yes. The RT9129 includes compatible Racetech side and rear mounting brackets. Approved bracket configurations vary by model, and additional vehicle-specific mounting hardware or installation work may be required. Does the Racetech RT9129 require rear mounting to the roll cage? Yes. To comply with FIA 8862-2009 homologation, the RT9129 must be properly back-mounted to the roll cage at shoulder level using approved mounting hardware. Side mounting alone is not sufficient for FIA-compliant installation. What is the difference between the Racetech RT9129 and RT4129 racing seats? Both models belong to Racetech's 129 Series of FIA 8862-2009 Advanced Racing Seats. The RT9129 uses a lightweight carbon/Kevlar composite shell, while the RT4129 uses a fiberglass/Kevlar/carbon construction. The RT9129 offers a significant weight reduction for applications where minimizing vehicle weight is a priority. Is the Racetech RT9129 compatible with HANS devices? Yes. The RT9129 is compatible with properly fitted frontal head restraint systems, including HANS devices. Its integrated head restraints and large harness openings support professional motorsport safety equipment. What harnesses can be used with the Racetech RT9129? The RT9129 is designed to accommodate common 4-, 5-, and 6-point racing harness systems. Always confirm harness routing, mounting geometry, and compliance with your racing organization's regulations. Does the Racetech RT9129 support driver cooling? Yes. The seat features integrated rear air ducting that can direct cooling air toward the driver's lower back. A compatible air source and ducting components may be required. What sizes are available for the Racetech RT9129? The RT9129 is available in Standard (HRW), Tall (THR), Wide (WHR), and Wide/Tall (WTHRL) configurations. Review the manufacturer's size charts to determine the best fit for your body dimensions and vehicle cockpit. Can the Racetech RT9129 be installed in a street car? The RT9129 is designed primarily for competition vehicles equipped with the appropriate roll cage, harness mounts, and FIA-approved seat mounting provisions. Installation in a street vehicle requires careful evaluation of structural mounting requirements and applicable road-use regulations. How long is the Racetech RT9129 FIA homologation valid? FIA 8862-2009 advanced racing seats have model-specific homologation records and product validity dates. Always check the date printed on the individual seat's FIA homologation label and the current FIA Technical List No. 40 before competition.

Racetech RT9119 Carbon Kevlar Racing Seat from $8,276.00

Racetech RT9119 Lightweight Racing Seat Building on the success of Racetech's 129 Series racing seats, the Racetech RT9119 racing seat offers the same ergonomic form and incredible features in a lighter, more protective package. Used by many professional race teams at both the national and international levels, this is the lightweight version using a precise combination of Carbon and Kevlar hybrid weave to achieve a shell weight as low as 9.9 lbs. (4.5 kg). The Racetech RT9119 is available in four shell sizes: Standard, Wide, Tall, and Wide & Tall. You can further customize your seat with low-profile base cushions or by adding side cushions for support in the thigh area. The Racetech RT9119 racing seat complies with FIA 8855-1999 standards.1 Racetech RT9119 Racing Seat Details Manufacturer: Racetech Gel-coat: clear finish Seat cover: black fire-retardant fabric FIA homologation: FIA 8855-1999 Shell construction: carbon/kevlar hybrid weave Shell weight: 4.5 kg (9.9 lbs) to 4.9 kg (10.8 lbs) Anti-abrasion patches in black perforated leather Integrated air ducting vented to the driver's lower back Back mount compatible (must be back mounted for FIA compliance) Racetech RT9119 Racing Seat Options RT9119HRW: Standard size, FIA approved RT9119THR: Tall size, FIA approved RT9119WTHR: Wide & tall size, FIA approved Racetech RTB1009M (side mount) Racetech RTB2115B + RTB2005C (back mount)1 1 Note: to comply with FIA 8855-1999, this Racetech seat must be back mounted to the roll cage at shoulder level. Back mounting instructions can be found here.

Racetech RT8119HR Racing Seat from $7,882.00

Racetech RT8119HR Head Restraint Racing Seat The latest advancement in drag racing seat technology takes an uncompromising form the all-new RT8119HR. Leveraging the accomplished 119 series seat architecture, the RT8119HR is crafted from an ultra-lightweight, premium carbon fiber shell that has been innovated for drag racing with the ultimate in safety, weight savings and comfort. Racetech RT8119HR Racing Seat Features Available in three sizes, starting at 13.0 lbs Significant weight savings enabling valuable weight redistribution Ergonomic shell geometry ensures secure driver fit Energy-absorbing foam optimizes head restraint, shoulder and rib support for additional safety and comfort Pronounced thigh support and molded base cushion Back mount-capable for enhanced chassis feel and structural integrity Large harness guides and provisions for a 7-point harness with reverse submarine belts keeps this seat aligned with the latest NHRA tech regulations Ideal for Pro Mod, Pro Boost, Pro Nitrous, Pro Street, Factory X, Factory Stock Showdown and stock-related classes Racetech RT8119HR Racing Seat Installation Parallel sides, and flush bosses for ease of mounting Choose from steel or aluminum side mount brackets designed for seamless integration with seat mounting points Racetech RT8119HR Racing Seat Size Specifications Application Common Applications Drag racing, where weight reduction is critical Stock Color / Material Gel-coat Clear self-finish Seat Cover Black fire-retardant fabric Wear Patches Black perforated leather Technical FIA Homologation None Shell Construction Carbon Fiber Shell Weight From 5.9lbs (3.4kg) Side Mount Hole Centres 295mm Back Mount Hole Centres 250mm Bolt Torque (Zinc) 30Nm / 22 ft lb Sizes HR - StandardWHR - WideWTHRL - Wide & Tall (Low top) Design Head Restraint Integrated head restraint HANS Compatible Yes Harness Compatibility Up to 7-point harness Large Harness Guides Yes Air Ducting Yes - vented to the driver's lower back Back-mount Compatible Yes Back-mount Required for FIA Homologation N/A Racetech RT8119HR Racing Seat Size Chart

Racetech RT4129HR Racing Seat from $7,595.00

Racetech RT4129HR Head Restraint Racing Seat Surpassing the stringent demands of the FIA 8862-2009 Advanced Racing Seat standard, the 129 series is Racetech’s no-compromise professional motorsport seat. Adept at cradling Bathurst winners and all of the Australian Supercar competition, there is none better when it comes to comfort and safety. This is our fibreglass (GRP) version offering great strength and safety benefits but in a more affordable option than our 9129 version. CAD models are available on request. Side (RTB1009M) and back (RTB1006B) mounting brackets are included. 10 year FIA life. * To comply with FIA 8862-2009, the 129 series seats must be back-mounted to the rollcage at shoulder level. Back-mounting improves seat strength and stability during an impact, increases driver 'feel' and reduces driver fatigue, Racetech RT4129HR Racing Seat Details Application Common Applications International-level circuit racing where extreme strength and FIA 8862 homologation is important Stock Color / Material Gel-coat Gloss black Seat Cover Black fire-retardant fabric Wear Patches Grey suede leather Technical FIA Homologation Complies with the latest FIA 8862-2009 regulations Shell Construction Composite Shell Weight From 13.4kg (29.5lbs) Side Mount Hole Centres 295mm Back Mount Hole Centres 250mm Bolt Torque (Zinc) 30Nm / 22 ft lb Sizes HRW - StandardWHR - WideTHR - TallWTHR - Wide & Tall Design Head Restraint Integrated head restraint HANS Compatible Yes Harness Compatibility Up to 6-point harness Large Harness Guides Yes Air Ducting Yes - vented to the driver's lower back Back-mount Compatible Yes - back mounting required for FIA homologation Back-mount Required for FIA Homologation Yes Racetech RT4129HR Racing Seat Size Chart

Racetech RT8119W Racing Seat $6,879.00

Racetech RT8119W Racing Seat The latest advancement in drag racing seat technology takes an uncompromising form the all-new RT8119. Leveraging the accomplished 119 series seat architecture, the RT8119 is crafted from an ultra-lightweight, premium carbon fiber shell that has been innovated for drag racing with the ultimate in safety, weight savings and comfort. Racetech RT4119W Racing Seat Features Available in two sizes, starting at 12.6 lbs Significant weight savings enabling valuable weight redistribution Ergonomic shell geometry ensures secure driver fit Energy-absorbing foam optimizes shoulder and rib support Pronounced thigh support and molded base cushion Back mount-capable for enhanced chassis feel and structural integrity Large harness guides and provisions for a 7-point harness with reverse submarine belts keeps this seat aligned with the latest NHRA tech regulations Ideal for Pro Mod, Pro Boost, Pro Nitrous, Pro Street, Factory X, Factory Stock Showdown and stock-related classes Racetech RT4119W Racing Seat Installation Parallel sides, and flush bosses for ease of mounting Choose from steel or aluminum side mount brackets designed for seamless integration with seat mounting points Racetech RT4119W Racing Seat Details Application Common Applications Drag racing, where weight reduction is critical Stock Color / Material Gel-coat Clear self-finish Seat Cover Black fire-retardant fabric Wear Patches Black perforated leather Technical FIA Homologation None Shell Construction Carbon Fiber Shell Weight From 7.3lbs (3.3kg) Side Mount Hole Centres 295mm Back Mount Hole Centres 250mm Bolt Torque (Zinc) 30Nm / 22 ft lb Sizes W - WideWT - Wide & Tall Design Head Restraint None HANS Compatible Yes Harness Compatibility Up to 7-point harness Large Harness Guides Yes Air Ducting Yes - vented to the driver's lower back Back-mount Compatible Yes Back-mount Required for FIA Homologation N/A Racetech RT4119W Racing Seat Size Chart

Racetech RT4119HR Racing Seat from $4,256.00

Racetech RT4119HR Head Restraint Racing Seat Building upon the successful 129-Series, the Racetech RT4119HR Series of head restraint equipped racing seats offer the same ergonomic form and incredible features in a lighter and more affordable package. The Racetech RT4119HR is used by many professional teams at both the national and international levels. There are four sizes available: Standard, Wide, Tall, and Wide & Tall. Customize your Racetech RT4119HR racing seat further by adding low-profile base cushions, or add side cushions for support in the thigh area. The Racetech RT4119 Series seats are compliant with FIA 8855-1999 standards.1 Racetech RT4119HR Racing Seat Details Manufacturer: Racetech Homologation: FIA 8855-1999 Shell construction: Glass Reinforced Plastic (GRP) composite Shell weight: 7.6 kg (16.7 lbs) to 8.3 kg (18.3 lbs) Back-mount compatible: yes Large harness guides Air ducting vented to the driver's lower back Racetech RT4119HR Racing Seat Options RT4119HRW: Standard size, FIA approved RT4119THR: Tall size, FIA approved RT4119WHR: Wide size, FIA approved RT4119WTHR: Wide & tall size, FIA approved Side mounts: Racetech RTB1009M aluminum brackets Back mount:2 RTB2115B bracket + RTB2005C clamps 1 Note: to comply with FIA 8855-1999, all RT4119HR racing seats except the RT4119HRW must be back-mounted to the roll cage at shoulder level. For back mounting, see instructions here. 2 Back-mounting improves seat strength and stability during an impact, increases driver feel and reduces driver fatigue. Check out this video for more great info.

Racetech RT4119W Racing Seat from $3,295.00

Racetech RT4119W Racing Seat Racetech took their most popular racing seats and gave them a chop! The RT4119W (Wide) and RT4119WT (Wide & Tall) seats are based on Racetech's popular RT4119WHR and RT4119WTHR, but without the head restraints for improved visibility and access in track-day type vehicles. The Racetech RT4119W and RT4119WT racing seats retain Racetech's unique, patented back mount design to give the driver ultimate support and feel for the chassis not available in basic floor-mounted seats. Customize your Racetech racing seat further with low-height base cushions or side cushions for support in the thigh area. The Ideal Racing Seat for Track Days The Racetech RT4119W and RT4119WT racing seats are not FIA homologated. They do not include an air ducting spigot, but when it gets hot in your Porsche or Pro Touring Camaro, you're just going to turn on your air-conditioning, right? Ideal for HPDE/DE track cars, off-road desert trucks & outlaw drag cars when drivers can't use a head restraint seat. Brackets And Mounting Options Side mount: Racetech RTB1009M 5mm aluminum brackets Back mount:1 Racetech RTB2115B + RTB2005C Racetech RT4119W Racing Seat Details Manufacturer: Racetech FIA Homologation: not FIA approved Gel-coat: gloss black Seat cover: black fire-retardant fabric Wear patches: black perforated leather Shell construction: Glass-Reinforced Plastic composite (GRP) Shell weight: from 7.0 kg (15.5 lbs) Seat sizes: Wide (W) or Wide & Tall (WT) Air Ducting: none Back-mount compatible: yes 1 The Racetech RTB2115B is a 5mm aluminum bracket that bolts directly to the shoulder beam of the seat. The RTB2005C clamps to the RTB2115B (once holes have been drilled) and comes in three variants: 1-1/2" (38mm), 1-5/8" (41mm) or 1-3/4" (45mm) inside diameter to suit your roll cage or roll bar tubing diameter.

Racetech RT4200HR Racing Seat from $2,994.00

Racetech RT4200HR Racing Seats The RT4200 Series builds upon the widely-respected RT4100 shell geometry with increased rib support and enhanced head restraint foaming for additional safety and comfort. Driver fitment is also designed to be more secure through the rib and torso. Racetech’s segment-leading features such as our exclusive back-mounting system, pronounced thigh support, molded base cushion, parallel sides, and flush bosses for ease of mounting make this seat series hard to beat. From the meticulously stitched fire-resistant fabric to the lightweight, resin-infused shells, all Racetech seats are handcrafted in Wellington, New Zealand. Racetech 4200HR Racing Seat Homologation All sizes have been rigorously tested to meet FIA 8855-1999 safety and durability regulations Certification lifespan of five years can be extended with a back mount connected to the vehicle’s roll cage If your sanctioning body does not require use of seats with FIA or SFI certification, you may select “No FIA Decal” from the dropdown above FIA hologram decals will not be included if you choose “No FIA Decal.” Seats without the FIA hologram decals increase safety affordability as seat lifespan is not limited Comparison to Standard Size RT4200HR Tall (RT4200THR): 2.36 in. / 60mm taller Wide and Tall (RT4200WTHR): 2.36 in. / 60mm taller and 1.57" / 40mm wider Mounting Hardware: 4200 Series seats use Racetech RTB1009M aluminum or RTB2009S steel side mount brackets. Racetech RT4200HR Racing Size Chart Racetech RT4200HR Racing Seat Details Application Common Applications From clubsport to national-level circuit and rally Stock Color / Material Gel-coat Gloss black Seat Cover Black fire-retardant nylon fabric with Spacer mesh in the shoulders Wear Patches Spacer Technical FIA Homologation FIA 8855-1999 certification available Shell Construction Fiberglass Composite Shell Weight From 6.1kg (13.5lbs) Sizes HR - StandardTHR - TallWTHR - Wide & Tall Design Head Restraint Integrated head restraint HANS Compatible Yes Harness Compatibility Up to 6-point harness Large Harness Guides Yes Air Ducting N/A Back-mount Compatible Yes Back-mount Required for FIA Homologation No

Racetech RT4100HR Racing Seat from $2,522.00

Racetech RT4100HR Racing Seats Announcing the all new Racetech 4100HR Series racing seats with head restraints! The RT4100HR is a standard-sized fiberglass race seat equipped with head restraint wings for enhanced safety. The Racetech 4100HR Series is focused on achieving a lightweight seat shell with optimized geometry, straddling the line between a seat wide enough in the shoulders to suit an athletic build, but narrow enough to fit in most cockpits. Racetech's patented back-mount technology has migrated down from the 119- and 129-Series, giving you the option of fixing the seat to your roll cage at shoulder level. Large harness guides and a removable molded base cushion allow a range of drivers of varying heights to fit comfortably. Breathable Spacer® fabric, parallel sides, and pronounced thigh support round out the features of this accomplished motorsport seat. For the larger driver, the RT4100WTHR is 6cm taller and 4cm wider than the Standard size. For those wanting a seat without head restraints, check out the Racetech RT4100 and RT4100WT. All Racetech 4100 Series seats use Racetech RTB1009M alloy side mounting brackets. Racetech RT4100HR Racing Seat Details Manufacturer: Racetech FIA homologation: 8855-1999 Seat sizes: Standard, Tall (T), or Wide & Tall (WT) Shell construction: fiberglass composite Shell weight: 6.1 kg (13.4 lbs) to 6.6 kg (14.5 lbs) Gel-coat: gloss black Seat cover: black fire-retardant nylon fabric with Spacer® mesh through the torso Back-mount compatible: yes Racetech RT4100HR Racing Seat Options RT4100HR: Standard size, head restraints, FIA approved RT4100THR: Tall size, head restraints, FIA approved RT4100WTHR: Wide & tall size, head restraints, FIA approved All Racetech 4100 Series seats use Racetech RTB1009M alloy side mounting brackets (can be added separately)

Racetech RT4100 Racing Seat from $2,049.00

Racetech RT4100 Series Racing Seats Introducing the all-new Racetech 4100 Series racing seats! The RT4100 is a standard-sized fiberglass race seat. Racetech focused on achieving a lightweight seat shell with optimized geometry, straddling the line between designing the seat to be wide enough in the shoulders to suit the athletic build, but narrow enough to fit in most cockpits. The Racetech 4100 Series patented back-mounted technology has trickled down from the 119 and 129 Series, giving you the option of fixing the seat to the roll bar or cage at shoulder level. The large harness guides and a removable molded base cushion of the Racetech RT4100 Series racing seats allow a range of drivers of varying heights to fit. Breathable Spacer® fabric, parallel sides and pronounced thigh support round off the features of this accomplished motorsport seat. Racetech RT4100 Racing Seat Options RT4100: Standard size, FIA approved RT4100T: Tall size, FIA approved RT4100WT: Wide & tall size, FIA approved All 4100 Series seats use Racetech RTB1009M alloy side mounting brackets (can be added separately). Racetech RT4100 Racing Seat Details Manufacturer: Racetech FIA homologation: 8855-1999 Seat sizes: Standard, Tall (T), or Wide & Tall (WT) Shell weight: 5.7kg (12.5 lbs) to 6.0kg (13.2 lbs) Shell construction: fiberglass composite Gel-coat: gloss black Seat covering: black fire-retardant nylon fabric with Spacer® mesh through the torso Back-mount compatible: yes

OUR ADDRESSES

West Des Moines, Iowa
119 19th St.
Suite #101
West Des Moines, IA 50265

Waukee, Iowa (Opening Summer 2026)
1675 NW Gettysburg Lane
Waukee, IA 50263

sales@competitionmotorsport.com

(844) 438-7244

OPERATING HOURS:
Mon-Fri 9am - 5pm (Central time)

IMPORTANT INFO About Us Contact Us Become a Dealer Blog Terms & Conditions Returns & Exchanges Shipping Policy Shipping Protection Legal Notice Your Privacy Choices

CLUB MEMBER INFO Club Members Contact Us BMW CCA Ferrari Club of America GRIDLIFE NASA Porsche Club of America SCCA SVRA

Find anything you need

Racetech are world-renowned for their race seats. Their composite and carbon fiber race seats are fitted to thousands of sports cars, touring cars, rally cars, drift, drag and speedway cars all over the world!