GiroDisc brake rotor with curved grooves, representative image for A1-447
A2-300 GiroDisc McLaren Senna Rear Brake Rotors 390mm $3,848.00
GiroDisc A2-300 Rear Brake Iron Rotor Conversion for McLaren Senna  Upgrade the braking system of your McLaren Senna with GiroDisc A2-300 Two-Piece Floating Rear Brake Rotors. Engineered specifically for converting the factory carbon-ceramic braking system to high-performance iron rotors, these precision-manufactured rear brake assemblies deliver exceptional heat management, serviceable construction, and consistent braking performance for demanding street and track applications. The GiroDisc A2-300 rear iron conversion system combines proprietary high-carbon iron friction rings with lightweight 6061-T6 aluminum mounting hats and fully floating hardware. Designed to work with the factory McLaren Senna rear brake calipers, these assemblies offer an alternative to replacing expensive OEM carbon-ceramic rotor assemblies while retaining the vehicle's original caliper configuration. McLaren Senna Rear Carbon-Ceramic to Iron Brake Conversion The GiroDisc A2-300 Rear Rotor Assemblies are designed for McLaren Senna owners seeking a serviceable iron brake rotor alternative to the factory carbon-ceramic system. Unlike conventional one-piece iron brake rotors, GiroDisc utilizes a two-piece construction with a high-carbon iron friction ring mounted to a lightweight aluminum hat. This design allows the iron ring and aluminum hat to expand at different rates under high braking temperatures, reducing thermal stress within the assembly. The fully floating mounting system accommodates controlled movement between the rotor ring and hat while maintaining the correct alignment with the factory brake calipers. For McLaren Senna owners who participate in regular track days, high-performance driving events, or competitive motorsport activities, the GiroDisc iron conversion offers a serviceable braking solution with replaceable friction rings and performance-focused cooling technology. GiroDisc A2-300 Rear Brake Rotor Features McLaren Senna-Specific Application: Engineered for the McLaren Senna rear braking system. Carbon-Ceramic to Iron Conversion: Replaces factory carbon-ceramic rear brake rotors with high-performance iron assemblies. Factory Caliper Compatibility: Designed to retain the original McLaren Senna rear brake calipers. Two-Piece Floating Construction: Combines high-carbon iron friction rings with lightweight aluminum hats. Proprietary High-Carbon Iron: Performance-oriented friction material engineered for repeated high-temperature braking. 72 Curved Cooling Vanes: Internal cooling passages help dissipate heat during aggressive braking. 6061-T6 Aluminum Hats: Precision-machined aluminum mounting hats help reduce unnecessary rotating mass. Black Anodized Finish: Corrosion-resistant finish protects the aluminum hats. High-Strength Drive Pins: Steel alloy mounting hardware connects the friction rings to the aluminum hats. Fully Floating Mounting System: Allows controlled differential thermal expansion between the rotor components. Spring Clips & Belleville Washers: Help control floating hardware movement and minimize unwanted street-driving noise. Serviceable Friction Rings: Worn iron rotor rings can be replaced independently of the aluminum hats. Slotted Friction Surface: Provides a performance-oriented brake contact surface. American Manufacturing: Major rotor components are manufactured by GiroDisc in Bellingham, Washington. GiroDisc A2-300 Rear Brake Rotor Specifications Manufacturer: GiroDisc Part Number: A2-300 Product Type: Two-Piece Floating Rear Brake Rotor Assemblies Vehicle Application: McLaren Senna Model Years: 2019+ Brake Position: Rear Brake Conversion: Carbon-Ceramic to Iron Rotor Construction: Two-Piece Fully Floating Rotor Surface: Slotted Rotor Ring Material: Proprietary High-Carbon Iron Rotor Hat Material: 6061-T6 Aluminum Rotor Hat Finish: Black Anodized Internal Cooling Vanes: 72 Curved Vanes Drive Pin Material: High-Strength Steel Alloy Drive Pin Finish: Cadmium Plated Mounting Hardware: Spring Clips and Belleville Washers Caliper Compatibility: Factory McLaren Senna Rear Calipers Brake Pads: Compatible Iron-Rotor Pad Compound Required Replacement Friction Rings: GiroDisc D2-206 Quantity: Pair of Rear Rotor Assemblies Manufacturing Location: Bellingham, Washington, USA GiroDisc A2-300 Rear Brake Rotor Fitment Guide McLaren Senna (2019) Important Fitment Note: These rotors are specifically designed for the McLaren Senna iron conversion application.  Brake Pad Requirement: Converting from carbon-ceramic to iron rotors requires brake pads with friction material compatible with iron rotor surfaces. Do not reuse carbon-ceramic-specific brake pads unless the pad manufacturer explicitly confirms compatibility. High-Carbon Iron Technology & Advanced Rotor Cooling GiroDisc manufactures its performance rotor rings using a proprietary high-carbon iron casting formulated specifically for demanding braking environments. During aggressive braking, the vehicle's kinetic energy is converted into heat. Consistent heat dissipation is essential for managing brake temperatures and maintaining reliable braking performance during repeated high-speed stops. The GiroDisc A2-300 incorporates 72 internal curved cooling vanes designed to act as a centrifugal pump as the rotor rotates. These ventilation channels draw air through the rotor assembly, helping remove heat from the friction ring during heavy braking. Combined with the high-carbon iron construction, this advanced cooling design supports the thermal management requirements of the McLaren Senna's high-performance rear braking system. Fully Floating Two-Piece Construction The GiroDisc A2-300 features a fully floating rotor design engineered to accommodate the thermal expansion associated with high-performance braking. Each assembly consists of a high-carbon iron friction ring attached to a precision-machined aluminum mounting hat using high-strength steel drive pins. As braking temperatures increase, the iron friction ring expands differently from the aluminum hat. The floating mounting hardware allows controlled movement between the components while maintaining rotor alignment. Spring clips and Belleville washers help manage rotor movement and reduce unwanted hardware noise during normal street operation. The result is a sophisticated, serviceable brake rotor assembly designed for both demanding performance driving and street use. Retain Your Factory McLaren Senna Rear Brake Calipers The GiroDisc A2-300 conversion is designed to utilize the McLaren Senna's original rear brake calipers. This allows owners to replace the factory carbon-ceramic rotor assemblies with GiroDisc's fully floating iron rotor system without requiring aftermarket rear calipers. The conversion requires compatible iron-rotor brake pads to ensure correct friction characteristics and rotor compatibility. Installation Note: Follow GiroDisc and McLaren installation procedures. Verify brake pad compatibility, rotor clearances, mounting hardware, and braking operation before driving. When converting the complete vehicle from carbon-ceramic to iron rotors, ensure the front and rear braking configurations use appropriate components and compatible friction materials. Reusable Aluminum Hats & GiroDisc D2-206 Replacement Rings One of the primary advantages of the GiroDisc A2-300 system is its serviceable two-piece design. Unlike one-piece brake rotors or complete carbon-ceramic rotor assemblies, GiroDisc allows the iron friction rings to be replaced independently of the aluminum mounting hats. When the friction rings become worn, compatible GiroDisc D2-206 Rear Replacement Rings can be installed while retaining the existing aluminum hats, provided the hats remain in serviceable condition. Compatible Replacement Rings: GiroDisc D2-206 Replacement ring service should follow the manufacturer's specified minimum thickness, crack inspection criteria, and hardware replacement procedures. Always inspect aluminum hats, drive pins, and related mounting components before reassembly. GiroDisc A2-300 Rear Brake Rotor FAQs Will GiroDisc A2-300 rear rotors fit my McLaren Senna? Yes. The GiroDisc A2-300 rear brake rotor assemblies are designed for the McLaren Senna iron brake conversion application. Verify your vehicle's brake configuration before purchasing. Are GiroDisc A2-300 rotors for the front or rear? The GiroDisc A2-300 assemblies are specifically designed for the rear axle. The corresponding McLaren Senna front iron conversion is available separately under GiroDisc part number A1-300. Do these rotors convert the McLaren Senna from carbon-ceramic to iron brakes? Yes. The GiroDisc A2-300 is designed to replace the original carbon-ceramic rear brake rotors with high-performance iron rotor assemblies while retaining the factory rear brake calipers. Can I keep my factory McLaren Senna brake calipers? Yes. The A2-300 rear iron conversion is engineered to operate with the original McLaren Senna rear calipers. Compatible iron-rotor brake pads are required. Can I reuse my original carbon-ceramic brake pads? Do not assume the original pads are compatible with iron rotors. Select brake pads specifically approved for use with the GiroDisc iron conversion and the McLaren Senna rear calipers. Are GiroDisc A2-300 rear rotors fully floating? Yes. These rear rotor assemblies utilize a fully floating two-piece design with high-strength steel drive pins, spring clips, and Belleville washers to accommodate thermal expansion. How many cooling vanes do the GiroDisc A2-300 rear rotors have? Published technical information describes 72 curved internal cooling vanes designed to help dissipate heat during high-performance braking. Can I replace the rotor rings without buying new aluminum hats? Yes. The GiroDisc A2-300 features reusable aluminum hats. Compatible replacement friction rings can be installed when the originals become worn, provided the hats remain suitable for continued use. Which replacement rotor rings fit the GiroDisc A2-300? The GiroDisc D2-206 rear replacement rings are listed for use with the McLaren Senna A2-300 rear rotor assemblies. Are these rotors suitable for track-day driving? Yes. The high-carbon iron friction rings, curved cooling vanes, and fully floating construction are designed for demanding performance applications. Proper brake pad selection, brake fluid, and routine system inspection remain essential for track use. Are GiroDisc A2-300 rear rotors sold individually or as a pair? The GiroDisc A2-300 rear brake rotor assemblies are sold as a pair, providing the left and right rear rotors. Where are GiroDisc brake rotors manufactured? GiroDisc manufactures its major rotor components, including aluminum hats, iron friction rings, and drive pins, at its facility in Bellingham, Washington, USA. Upgrade Your McLaren Senna with GiroDisc Rear Iron Brake Rotors For McLaren Senna owners seeking an alternative to the factory carbon-ceramic rear brake system, GiroDisc A2-300 Two-Piece Floating Rear Brake Rotors provide a precision-engineered, serviceable iron conversion solution. Featuring high-carbon iron friction rings, reusable aluminum mounting hats, advanced cooling technology, and factory caliper compatibility, GiroDisc delivers a performance-focused rear brake upgrade designed for the demands of the McLaren Senna.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-300 GiroDisc McLaren Senna Front Brake Rotors 390mm $3,848.00
GiroDisc A1-300 Front Brake Iron Rotor Conversion for McLaren Senna    Transform the braking performance and serviceability of your McLaren Senna with the GiroDisc A1-300 Front Brake Rotor Kit. Engineered specifically for the McLaren Senna, this premium two-piece floating iron brake rotor conversion replaces the factory carbon-ceramic front discs with high-performance slotted cast iron friction rings and lightweight aluminum center hats. Designed for demanding high-performance driving and track-day applications, the GiroDisc A1-300 features 390mm x 34mm front rotors, advanced internal cooling, and a serviceable floating construction. This system offers McLaren Senna owners an alternative to the high replacement costs associated with factory carbon-ceramic brake discs while maintaining compatibility with the appropriate original front brake caliper configuration. High-Performance Iron Brake Rotor Conversion for McLaren Senna The McLaren Senna was engineered to deliver extraordinary performance on both road and track, featuring a sophisticated factory carbon-ceramic braking system. GiroDisc's A1-300 front rotor kit provides a cast iron alternative for enthusiasts seeking a serviceable braking solution for demanding driving conditions. Each rotor combines a high-performance cast iron friction ring with a precision-machined 6061-T6 aluminum center hat. The two-piece floating construction allows the iron friction ring to expand independently of the aluminum hat as braking temperatures rise, helping minimize thermal stress and maintain consistent rotor alignment. The 390mm diameter and 34mm thickness maintain the nominal dimensions of the original front brake discs. Internally ventilated friction rings feature curved cooling vanes that promote airflow through the rotor, helping dissipate heat generated during repeated heavy braking. Unlike the original carbon-ceramic system, GiroDisc's iron conversion uses replaceable friction rings. Once the rotor rings reach their service limit, the GiroDisc D1-300 replacement rings can be installed while retaining the aluminum hats, provided the reusable components remain in serviceable condition. Important: Converting from carbon-ceramic to cast iron brake rotors requires compatible brake pads and proper system evaluation. Brake pads intended exclusively for carbon-ceramic discs must not be assumed compatible with iron rotors. A1-300 GiroDisc McLaren Senna Front Brake Rotor Features McLaren Senna Specific Design: Engineered for the McLaren Senna equipped with the factory carbon-ceramic front braking system. Carbon-Ceramic to Iron Conversion: Replaces expensive factory carbon-ceramic front discs with serviceable cast iron friction rings. 390mm Front Rotor Diameter: Maintains the nominal factory front rotor diameter for the intended application. 34mm Rotor Thickness: Designed around the original front rotor thickness and compatible caliper configuration. Two-Piece Floating Construction: Allows controlled expansion between the cast iron friction ring and lightweight aluminum center hat. 6061-T6 Aluminum Center Hats: Precision-machined aircraft-grade aluminum construction provides a strong, lightweight mounting structure. High-Performance Cast Iron Friction Rings: Engineered to provide consistent friction characteristics under demanding braking conditions when paired with suitable pads. Curved Directional Cooling Vanes: Internal ventilation promotes airflow through the rotor to help dissipate braking heat. Slotted Friction Surface: Precision-machined slots help clear friction debris and maintain consistent brake pad contact. Floating Drive Pin System: Steel drive hardware connects the friction ring to the aluminum hat while allowing controlled thermal expansion. Serviceable Rotor Design: Worn friction rings can be replaced separately without purchasing complete rotor assemblies. GiroDisc D1-300 Replacement Rings: Compatible front replacement rings are available separately for long-term servicing. Factory Caliper Compatibility: Designed for the intended McLaren Senna original front brake caliper arrangement when installed with compatible iron-rotor brake pads. Track-Focused Engineering: Developed for demanding performance applications where braking consistency and component serviceability are priorities. Complete Front Rotor Pair: Includes one left and one right complete front rotor assembly with aluminum hats. A1-300 GiroDisc McLaren Senna Front Brake Rotor Specifications Manufacturer: GiroDisc Part Number: A1-300 Product Type: Two-Piece Floating Front Brake Rotor Kit Vehicle Manufacturer: McLaren Vehicle Model: Senna Model Years: 2019+ Engine: 4.0L Twin-Turbocharged V8 Rotor Position: Front Axle Rotor Diameter: 390mm Rotor Thickness: 34mm Rotor Construction: Two-Piece Floating Conversion Type: Carbon-Ceramic to Cast Iron Friction Surface: Slotted Rotor Ventilation: Internally Vented Cooling Design: Curved Directional Vanes Friction Ring Material: Cast Iron Center Hat Material: 6061-T6 Aluminum Mounting System: Floating Steel Drive Pins Left Front Rotor: A1-300SL Right Front Rotor: A1-300SR Replacement Friction Rings: GiroDisc D1-300 Left Replacement Ring: D1-300SL Right Replacement Ring: D1-300SR Caliper Compatibility: Compatible Factory Front Calipers Brake Pads: Iron-Compatible Brake Pads Required Quantity: Two Complete Front Brake Rotor Assemblies (Pair) Application: High-Performance Street and Track Use A1-300 GiroDisc McLaren Senna Front Brake Rotor Vehicle Fitment McLaren Senna (2019): 4.0L Twin-Turbocharged V8 models equipped with the compatible factory carbon-ceramic front braking system. Important Fitment Note: GiroDisc A1-300 is designed as a front iron brake rotor conversion for the McLaren Senna. Confirm the vehicle's brake caliper configuration, rotor dimensions, pad compatibility, and wheel clearance before installation. Brake Conversion Notice: The factory McLaren Senna uses carbon-ceramic brake discs. Converting to cast iron requires brake pads compatible with iron friction surfaces. The complete front and rear braking system should be evaluated to ensure appropriate braking performance and balance. Please inquire for compatible brake pads and conversion guidance. A1-300 GiroDisc McLaren Senna Front Brake Rotor Frequently Asked Questions Will GiroDisc A1-300 front rotors fit my McLaren Senna? The GiroDisc A1-300 is designed for the 2019+ McLaren Senna equipped with its compatible original front brake system. It replaces the factory carbon-ceramic front discs with two-piece floating iron brake rotors. Verify the installed brake configuration before ordering. Are the GiroDisc A1-300 brake rotors sold individually or as a pair? The GiroDisc A1-300 kit is sold as a complete front axle pair, including one left front rotor (A1-300SL) and one right front rotor (A1-300SR), both with aluminum center hats. What size are the GiroDisc McLaren Senna front rotors? The GiroDisc A1-300 front rotors measure 390mm in diameter and 34mm in thickness, matching the nominal dimensions of the factory front brake discs. Are the GiroDisc A1-300 rotors carbon ceramic? No. The A1-300 is a carbon-ceramic to cast iron conversion kit. It features cast iron friction rings attached to aluminum center hats using a floating mounting system. Can I use my existing carbon-ceramic brake pads with these rotors? Brake pads designed specifically for carbon-ceramic discs must not be assumed suitable for cast iron rotors. Compatible iron-rotor brake pads are required. Please inquire for recommendations based on your McLaren Senna brake configuration and intended driving conditions. Do I need to replace my factory brake calipers? The A1-300 is designed to work with the compatible original front brake calipers. However, the conversion requires appropriate brake pads and verification of the complete braking setup before installation. Can I replace just the GiroDisc friction rings when they wear out? Yes. GiroDisc offers D1-300 replacement front friction rings for this application. The original GiroDisc aluminum hats can be retained when they remain serviceable and meet the manufacturer's inspection requirements. What are the benefits of converting from carbon-ceramic to iron brake rotors? Iron rotor conversions can offer lower replacement component costs, replaceable friction rings, and a wider selection of compatible brake pad compounds. However, iron rotors are generally heavier than carbon-ceramic discs, and overall braking performance depends on the complete system and operating conditions. Are GiroDisc A1-300 rotors suitable for track days? The A1-300 uses a floating two-piece design and internally ventilated cast iron friction rings intended for demanding performance driving. Proper brake pad selection, cooling, inspection, and bedding procedures are essential for track use. Does GiroDisc offer matching rear iron conversion rotors for the McLaren Senna? Yes. GiroDisc offers the A2-300 rear rotor system for the McLaren Senna. Front and rear rotor conversions should be evaluated together to maintain suitable braking balance and compatibility. Upgrade Your McLaren Senna Braking System with GiroDisc For McLaren Senna owners seeking an alternative to factory carbon-ceramic brake disc replacement, the GiroDisc A1-300 Front Brake Rotor Kit delivers a premium two-piece floating iron conversion engineered for performance and serviceability. Featuring 390mm slotted cast iron friction rings, lightweight aluminum center hats, and replaceable wear components, the A1-300 provides a practical braking solution for enthusiasts who demand consistent performance and straightforward rotor maintenance. Choose GiroDisc A1-300 for your McLaren Senna and enjoy a purpose-built front iron brake conversion backed by GiroDisc's motorsport-focused engineering.
Girodisc replacement rotor rings
D2-206 Girodisc Rear Replacement Rotor Rings | McLaren $1,670.00
Girodisc McLaren 390mm Rear Replacement Rings These Girodisc D2-206 rear replacement rings are sold as rings only and include replacement hardware. They are engineered to be used with existing Girodisc aluminum hats and are not compatible with OEM or other aftermarket hats. GiroDisc D2-206 Replacement Iron Rotor Vehicle Fitment McLaren 750S (Track Pack brakes)McLaren 765LT (Clubsport brakes)McLaren Senna Serviceable Two-Piece Design Rings are machined from proprietary high-carbon iron for durability and heat resistance. The 48 curved vane design acts as a centrifugal pump to draw air through the hub, improving cooling under sustained braking. Reusing your Girodisc hats helps control long-term running costs. GiroDisc D2-206 Replacement Iron Rotor Vehicle Features Replacement rings only; reuse Girodisc hats Includes replacement hardware High-carbon iron rings for reliable performance 48 curved vanes for effective cooling Direct fit for Girodisc A2-206 rear rotor kits Girodisc McLaren 390mm Rear Replacement Rings FAQs Do these include hats? No, these are rings only and require Girodisc hats. Are they sold as a pair? Yes, rings are sold in pairs with hardware. Can I use factory hats? No, these rings are only for Girodisc hats. What kit do these pair with? They are the replacement rings for A2-206 rear rotor kits.
girodisc hero image
GiroDisc 4004.15 Brake Pads for McLaren Iron Conversion from $944.00
Girodisc 4004.15 GP-Series Rear Brake Pads  McLaren Iron Conversion Girodisc GP-Series rear pads for McLaren Iron Conversion systems provide a high-performance braking upgrade tailored for serious street drivers (GP10) and endurance-focused track users (GP30). These pads are precision-cut to the GP shape 4004 and engineered to deliver consistent modulation, heat stability, and long rotor life when paired with Girodisc iron conversion rotors. Fits the Following GiroDisc Iron Conversion Rear Rotors for McLaren McLaren 750S (Standard and Trackpack brakes)McLaren ArturaMcLaren 765LT (standard and Clubsport brakes)McLaren SennaMcLaren 720SMcLaren 620RMcLaren 600LTMcLaren MP4-12C (oem CCB) Used with GiroDisc Iron Conversion only.  Do NOT use these pads with your OEM CCB Rotors. GP10 Street / Track-Day Compound Designed for spirited street use and mild track driving. Offers low dust, excellent cold bite, and smooth pedal feel with strong fade resistance. GP30 Endurance Race Compound Built for extended high-temperature operation. Ideal for endurance racing and heavy track use where consistency and rotor life are key. GiroDisc 4004 Brake Pad Features • Precision-cut for Girodisc Iron Conversion rear systems• Excellent modulation and heat control across both compounds• Low rotor wear and stable friction at temperature• Direct-fit replacement for GP pad shape 4004• Sold/priced per axle set GiroDisc 4004 Brake Pad Specifications • Pad Shape: 4004• Position: Rear• Compounds included: GP10 Street / GP30 Endurance• Compatible Systems: Girodisc Iron Conversion kits only• Sold/priced per pair of pads (one axle set) Girodisc GP-Series Pad FAQs Do these pads fit OEM McLaren carbon-ceramic brakes? No. These pads are for Girodisc Iron Conversion kits only and will not fit factory PCCB/CCM calipers. Which compound should I choose? GP10 is ideal for street and light track. GP30 is the choice for aggressive track use or endurance sessions. Are these pads noisy? GP10 is generally quiet. GP30 may produce light noise during low-speed operation due to its high-heat race formulation. Do I need to bed the pads? Yes—proper bedding ensures optimal friction transfer and prevents uneven pad deposits.
girodisc hero image
Girodisc 1382.17 Front Brake Pads for Iron Rotor Conversion from $886.00
GiroDisc 1382 Front Racing Brake Pads for Iron Rotor Conversions  GiroDisc 1382.17 Front Brake Pad Fitment Guide  McLaren 750S with TrackPackMcLaren 765LT (standard brakes and Clubsport Pack)McLaren SennaMcLaren 675LTMcLaren 650SMcLaren 570S / 570GTMcLaren MP4-12C (oem ccb) Used with GiroDisc Iron Conversion only.  Do NOT use these pads with your OEM CCB Rotors. GiroDisc 1382.17 Front Brake Pad Compounds GP10 Street / Track-Day Compound Designed for spirited street use and mild track driving. Offers low dust, excellent cold bite, and smooth pedal feel with strong fade resistance. GP30 Endurance Race Compound Built for extended high-temperature operation. Ideal for endurance racing and heavy track use where consistency and rotor life are key. GP35 All-around track and race compound—balancing endurance-pad longevity with sprint-pad bite. It’s best suited to HPDE, frequent track days, and racing where modulation and wear life both matter.  GiroDisc 1382 Brake Pad Frequently Asked Questions (FAQ) Can I daily drive with GP10 pads? GP10 is the best compromise between street and track use.   Do I need GiroDisc rotors to use these pads? Yes, pairing these pads with GiroDisc two-piece rotors is recommended for the best results.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa