Sparco Racing Seats

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an ultra-lightweight carbon fiber racing seat engineered to meet the FIA’s highest seat rating, FIA 8862-2009. Tested to withstand ~70G impacts and over 6,600 lbs of lateral force, the ADV XT delivers top-tier strength with a relaxed, GT-oriented driving position for long stints and endurance comfort. Energy-absorbing structures protect high-stress areas, while the self-extinguishing upholstery includes non-slip zones in the shoulders and seat base for secure support. HANS compatible and FIA approved when mounted with Sparco side-mount brackets #0049605. Technology Ultra-lightweight carbon fiber construction FIA 8862-2009 approved; ~70G impact testing GT-cockpit geometry with relaxed driving position HANS device compatible Fire-retardant, self-extinguishing upholstery Non-slip shoulder and seat inserts Dimensions Competition Motorsport | sales@competitionmotorsport.com | (844) 438-7244

Sparco Racing Seats ADV Elite Carbon Seat The Sparco ADV Elite Carbon is an extremely strong, ultra-lightweight carbon fiber seat designed to meet the FIA’s highest seat rating, FIA 8862-2009. This means the Sparco ADV Elite Carbon seat has been tested to withstand impacts of approximately 70G. Required for WRC racing, the ADV Elite Carbon was engineered with the upright driving position preferred by rally drivers. In addition to the rally position, the seat’s outer dimensions are reduced to fit smaller WRC cockpits. With unmatched strength, the Sparco ADV Elite Carbon can withstand over 6,600 lbs. of lateral force. It features energy-absorbing reinforcement in high-stress areas to protect the driver. The entire seat is covered in self-extinguishing fabric with special non-slip material in the shoulders and seat cushion for secure support under race conditions. The Sparco ADV Elite Carbon seat is FIA approved when mounted with Sparco #004988ADV side-mount brackets. Sparco ADV Elite Carbon Seat Technology Ultra-lightweight carbon fiber construction FIA 8862-2009 approved Tested to withstand 70G impacts Designed for WRC rally cockpits and driver position HANS device compatible Fire-retardant fabric Special non-slip fabric in key areas Sparco ADV Elite Carbon Seat Dimensions

Sparco ADV Prime Pad Carbon Racing Seat | FIA 8862-2009 The Sparco ADV Prime Pad Carbon Racing Seat represents the ultimate in FIA 8862-2009 safety homologation, engineered for professional motorsport where maximum protection, rigidity, and weight savings are critical. Constructed from advanced carbon fiber with energy-absorbing foam and K-Point self-extinguishing fabric, this seat is built to perform at the highest levels of competition. Advanced Carbon Safety Cell The Sparco ADV Prime Pad is manufactured with a full carbon fiber monocoque shell, designed to exceed FIA 8862-2009 safety standards. It features a new lining design with removable double-density pads, a full-length cushion with separate leg rest, and self-extinguishing fabric for maximum fire resistance. Energy-absorbing padding is integrated for impact protection. Sparco ADV Prime Pad Features FIA 8862-2009 homologation (No. AS.095.21) Lightweight carbon fiber shell for maximum rigidity and safety New K-Point self-extinguishing fabric for durability and fire resistance Removable double-density padding and full-length cushion for ergonomic comfort Integrated energy-absorbing foam to meet FIA impact standards M12 side mounting with 290 mm spacing for FIA-compliant installation Add Sparco ADV Prime Side Mount Brackets (004990ADV) Sparco ADV Prime Pad Carbon Racing Seat FAQs: What is FIA 8862-2009? FIA 8862-2009 is the highest FIA homologation for seat safety, requiring the seat to withstand extremely high impact loads during testing. Is this seat suitable for road use? No. FIA 8862-2009 seats are intended strictly for competition vehicles with approved mounting structures. Can the padding be replaced? Yes. The ADV Prime Pad features removable double-density pads that can be replaced or adjusted for fit. What mounting hardware do I need? This seat requires FIA-homologated side mounts using M12 bolts and 290 mm lateral spacing. Does this seat expire? FIA 8862-2009 seats typically have a 10-year homologation life from the date of manufacture, with possible extensions depending on regulations. Upgrade your race car with the Sparco ADV Prime Pad Carbon Racing Seat and meet the highest levels of safety, comfort, and performance on the track.

Sparco QRT-C Performance Carbon Fiber Racing Seat The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat Size Large – up to a 36” waist (pants size) What Is Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat Features Ultra-light carbon fiber shell Excellent fitment in small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA 8855-1999 approved Dimensions

Sparco EVO Performance Carbon Fiber Racing Seats The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track. Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line. As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. Sparco Evo Performance Seat Sizes The Sparco EVO series is among the most versatile competition seats we carry, available in the following three sizes to ensure proper fitment: EVO CARBON – Medium (up to 34” waist) EVO L CARBON – Large (up to 36” waist) EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Features Ultra-light pre-preg carbon fiber shell Excellent fitment into small vehicle cockpits Three sizes: Medium through XL Excellent ergonomics Leather and alcantara upholstery FIA 8855-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco Circuit / Circuit II Carbon Fiber Racing Seat The Sparco Circuit Carbon is the pre-preg (dry) carbon version of the Circuit QRT, designed with integrated head protection for added safety. Lightweight construction, high-grip fabrics, and supportive ergonomics keep drivers stable and comfortable in compact cockpits. Compatible with HANS/FHR devices and FIA 8855-1999 approved. Key Features Pre-preg (dry) carbon fiber shell for ultralight strength Integrated head bolsters with energy-absorbing surround High-grip, fire-retardant fabric in key contact areas Slim profile for small-cockpit fitment Supports HANS/FHR device use FIA 8855-1999 approved Sizing Circuit (Standard): Small/Narrow – fits up to a 32" waist Circuit II (Large): Medium – fits up to a 36" waist

Sparco Martini Legend Kevlar Racing Seat Rev up your racing experience with the Sparco Martini Legend Kevlar race seat, a meticulously crafted seat with a winning combination of Kevlar and carbon fiber. Engineered for unparalleled performance, safety and style, this race seat is the pinnacle of motorsport excellence. With its exceptional construction and iconic design, it's no wonder this seat is at the top of every racing enthusiast's wishlist. Sparco: An Unrivaled Performance Heritage The Sparco Martini Legend Kevlar race seat boasts an innovative construction that combines lightweight Kevlar and dry carbon fiber. This fusion provides outstanding strength, rigidity, and durability while maximizing safety. The seat's ergonomic design ensures maximum comfort during intense races, allowing you to maintain full control of your vehicle at high speeds. Martini Legend Kevlar Seat Safety Safety is of utmost importance in motorsports, and the Sparco Martini Legend Kevlar race seat excels in this aspect. It meets the stringent FIA 8855-1999 safety standard, guaranteeing optimal protection in an impact. The seat features integrated head and shoulder protection, bolstered side supports, and deep thigh cushions to minimize the risk of injury. With this seat, you can race with confidence, knowing that your well-being is prioritized. Iconic Martini Racing Style Stand out on the track with the legendary Martini Racing design adorning the Sparco Martini Legend Kevlar race seat. The iconic Martini Racing colors are proudly displayed on this seat, instantly recognizable by racing enthusiasts worldwide. This timeless aesthetic, combined with the impeccable craftsmanship of Sparco, creates a seat that not only performs but also captivates attention. Join the elite ranks of motorsport legends and elevate your racing to new heights with the Sparco Martini Legend Kevlar race seat. Immerse yourself in the race with its Kevlar and carbon fiber construction, delivering unrivaled performance, safety, and iconic style. Don't settle for anything less than the best – equip yourself with a seat that embodies the essence of motorsport excellence. Purchase yours today and experience the thrill of true racing mastery. Sparco Legend Kevlar Race Seat Size Medium / Large (up to 36” waist) Sparco Martini Legend Kevlar Seat Details Ultra lightweight dry carbon/Kevlar shell Bottom mount only Excellent ergonomics FIA 8855-1999 approved

Sparco ULTRA Carbon Racing Seat – FIA 8855-1999 Approved   Extreme weight reduction meets uncompromising carbon fiber racing seat technology. The Sparco ULTRA Carbon Racing Seat is engineered for serious motorsport competitors who demand exceptional strength, minimal weight, and a low seating position. Constructed from aerospace-grade pre-preg carbon fiber, this ultra-lightweight fixed-back competition seat combines advanced materials with a purpose-built ergonomic design. Weighing approximately 8.3 lbs (3.8 kg), the Sparco ULTRA Carbon represents one of Sparco's most weight-focused FIA-approved racing seat designs. Its exposed dry carbon construction eliminates traditional upholstery and padding, reducing unnecessary weight while providing a more direct connection between the driver and vehicle. Designed for narrow racing cockpits, the ULTRA Carbon provides an exceptionally compact profile without sacrificing the contoured support needed during demanding competition. Its sculpted monocoque shell, integrated harness openings, and low seating position make it an outstanding choice for lightweight race cars, time attack builds, and competition vehicles where every pound matters. Sparco ULTRA Carbon Racing Seat Features FIA 8855-1999 Homologated: Competition racing seat designed to meet recognized FIA safety requirements. Ultra-Lightweight Construction: Approximately 8.3 lbs (3.8 kg) for exceptional weight savings. Pre-Preg Carbon Fiber Shell: Aerospace-grade dry carbon construction delivers excellent strength with minimal weight. Exposed Carbon Finish: Uncovered carbon fiber shell eliminates conventional fabric upholstery and padding. Low Seating Position: Thin, sculpted shell allows the driver to sit lower in the vehicle. Narrow Cockpit Compatibility: Compact exterior dimensions help accommodate restricted racing interiors. Ergonomic Monocoque Design: Integrated lumbar contouring and carefully engineered recline provide natural driver support. Direct Chassis Feedback: Minimal cushioning allows drivers to experience a more connected seating position. Integrated Harness Openings: Shoulder harness pass-through openings accommodate compatible motorsport harness systems. Side-Mount Installation: Designed for installation using compatible Sparco aluminum side brackets. Premium Racing Appearance: Glossy exposed carbon weave delivers a distinctive professional motorsport finish. Ultra-Lightweight Pre-Preg Carbon Fiber Construction The Sparco ULTRA Carbon Racing Seat uses advanced pre-preg carbon fiber technology to achieve an outstanding strength-to-weight ratio. Unlike conventional composite racing seats, which often rely on thicker shells, padding, and upholstery, the ULTRA Carbon focuses on minimizing material weight while maintaining the structural performance required for competition. Pre-preg carbon fiber construction utilizes reinforcement materials impregnated with a controlled amount of resin. This manufacturing method supports consistent material distribution and efficient structural design. The result is a lightweight carbon fiber monocoque shell that provides an exceptionally direct seating experience without unnecessary layers or bulk. Designed for Narrow Racing Cockpits Many competition vehicles have limited interior space, especially when equipped with roll cages, door bars, center tunnels, and specialized safety equipment. The Sparco ULTRA Carbon addresses these challenges with a compact, low-profile shell that allows installation in tight racing environments. Its streamlined side profile and carefully contoured seating area help maximize available cockpit space while supporting a secure driving position. This makes the ULTRA Carbon especially appealing for lightweight race car builds, track-focused vehicles, and custom motorsport applications where traditional racing seats may be too wide or bulky. Lower Seating Position and Improved Chassis Feedback The ULTRA Carbon eliminates conventional fabric upholstery and thick foam padding to create a seating surface that is both exceptionally lightweight and remarkably direct. By positioning the driver closer to the carbon shell, the seat can help lower the seating position compared with bulkier upholstered alternatives, depending on the mounting configuration. A lower seating position can improve helmet clearance, accommodate drivers within tight roll cage structures, and support more favorable driver positioning in competition vehicles. The rigid carbon construction also provides direct feedback from the vehicle chassis, allowing drivers to feel more connected to the car's movement during acceleration, braking, and cornering. Ergonomic Support Without Traditional Upholstery Despite its minimalist appearance, the Sparco ULTRA Carbon is engineered with driver ergonomics in mind. The one-piece carbon shell incorporates carefully shaped back support, lumbar contouring, and a natural recline angle intended to accommodate the driver's seated position. Its sculpted seating surface supports the body without requiring traditional foam cushions or fabric coverings. Drivers should evaluate the seat's shape and dimensions carefully to ensure a secure fit, particularly when selecting a seat for extended endurance racing sessions. FIA 8855-1999 Racing Seat Homologation The Sparco ULTRA Carbon carries FIA 8855-1999 homologation and is designed for use in motorsport applications requiring an approved fixed-back competition seat. Its lightweight carbon construction and competition-focused design make it suitable for professional and amateur racing applications where the seat complies with the applicable sanctioning body's regulations. Always verify the seat's homologation label, expiration requirements, mounting configuration, and competition eligibility before installation. Sparco ULTRA Carbon Racing Seat Specifications Manufacturer: Sparco Model: ULTRA Carbon Manufacturer Part Number: 008037ZNR Seat Type: Fixed-Back Competition Racing Seat FIA Homologation: FIA 8855-1999 Shell Material: Pre-Preg Carbon Fiber Construction: Lightweight Carbon Fiber Monocoque Weight: Approximately 8.3 lbs (3.8 kg) Finish: Exposed Black Carbon Fiber Upholstery: None – Bare Carbon Shell Size: Single-Size Competition Shell Fitment Guidance: Approximately Medium/Large, up to 36-inch waist depending on driver build Mounting: Side-Mount Configuration Recommended Brackets: Sparco 600W or 600W90 Aluminum Side Mounts Applications: Auto Racing, Time Attack, Club Racing, and Track-Focused Competition Vehicles Sparco ULTRA Carbon Racing Seat Mounting Requirements Important: The Sparco ULTRA Carbon requires compatible aluminum side-mount brackets for proper installation. Due to the unique shape of the carbon shell and its low-profile design, Sparco recommends its 600W or 600W90 aluminum side mounts. Sparco 600W Aluminum Side Mounts: Compatible racing seat side brackets designed for secure installation. Sparco 600W90 Aluminum Side Mounts: Alternative 90-degree aluminum mounting brackets for compatible applications. These mounting options are intended to accommodate the seat's construction and support a low seating position. Mounting brackets, hardware, seat rails, and vehicle-specific adapters may be required depending on the installation and are sold separately unless otherwise specified. Use the appropriate hardware and mounting procedures for your vehicle and racing organization. Sparco ULTRA Carbon Racing Seat Dimensions Proper seat measurements are especially important when installing a fixed-back racing seat in a narrow cockpit or competition vehicle with roll cage clearance restrictions. The dimensions below are based on the supplied product dimension drawing. Front Overall Width: 17.76 inches (451 mm) Rear Overall Width: 17.13 inches (435 mm) Front Mounting Width: 14.72 inches (374 mm) Rear Mounting Width: 13.90 inches (353 mm) Overall Height: 33.46 inches (850 mm) Overall Depth: 29.53 inches (750 mm) Side Mounting Hole Spacing: 11.42 inches (290 mm) Fitment Note: Measure the available cockpit width, roll cage clearance, mounting points, seat height, and driver position before purchasing. Dimensions should be confirmed against the current manufacturer's technical drawing before fabrication or permanent installation. Why Choose the Sparco ULTRA Carbon Racing Seat? The Sparco ULTRA Carbon is designed for racers who prioritize low weight, compact fitment, and direct driver feedback. Its pre-preg carbon fiber construction, minimalist seating surface, and ergonomic monocoque shape distinguish it from conventional fabric-covered racing seats. For competition vehicles where every pound matters, the ULTRA Carbon offers an exceptional combination of advanced materials, purposeful engineering, and professional racing aesthetics. Sparco ULTRA Carbon Racing Seat Frequently Asked Questions How much does the Sparco ULTRA Carbon Racing Seat weigh? The Sparco ULTRA Carbon has a listed weight of approximately 8.3 lbs (3.8 kg), making it an exceptionally lightweight fixed-back competition seat. Is the Sparco ULTRA Carbon FIA approved? Yes. The seat carries FIA 8855-1999 homologation. Verify the seat's homologation label and your racing organization's eligibility requirements before competition. What is the Sparco ULTRA Carbon made from? The seat uses high-strength pre-preg aerospace-grade carbon fiber, commonly referred to as dry carbon, to achieve a high strength-to-weight ratio. Does the Sparco ULTRA Carbon come with padding? The ULTRA Carbon is designed for use without conventional fabric upholstery or foam padding. Its sculpted carbon shell provides the primary seating surface. What size driver fits the Sparco ULTRA Carbon Racing Seat? The seat is offered in a single-size configuration, commonly described as a Medium/Large fit for drivers with approximately a 36-inch waist or smaller. Actual fit depends on hip width, torso dimensions, driving position, and personal preference. Can the Sparco ULTRA Carbon fit into a narrow race car cockpit? Yes. Its compact shell and narrow exterior design make it especially suitable for applications where traditional racing seats may have clearance issues. Always verify dimensions before installation. What mounting brackets are required? Sparco recommends the 600W or 600W90 aluminum side-mount brackets for installation due to the ULTRA Carbon's unique shell geometry. Does the Sparco ULTRA Carbon include seat brackets? Mounting brackets are separate components unless specifically included in a product bundle. Vehicle-specific installation hardware may also be necessary. Can the Sparco ULTRA Carbon improve driving position? Its slim carbon construction and compatible low-position side mounting can allow a lower seating position, depending on the vehicle and installation. Is the Sparco ULTRA Carbon suitable for track days and racing? Yes. The seat is intended for competition motorsport applications, including track-focused builds, time attack, and club racing where the installation and homologation meet event requirements. Shop the Sparco ULTRA Carbon Racing Seat Experience premium carbon fiber seat construction engineered for the demands of serious motorsport competition. With its exceptionally lightweight monocoque shell, FIA 8855-1999 homologation, narrow cockpit fitment, and low seating position, the Sparco ULTRA Carbon delivers the performance-focused design racers expect from Sparco. Upgrade your race car with the Sparco ULTRA Carbon Racing Seat and experience an exceptionally direct, lightweight driving position.  

Sparco QRT-C Carbon Racing Seat Sparco's fantastic QRT-C Carbon is an all-carbon fiber version of the incredibly popular Sparco QRT-R. The QRT-C is the lightest large-size carbon fiber seat on the market. Weighing in at a mere 12 lbs (with padding and cover), the Sparco QRT-C Carbon is constructed from pre-preg aerospace-grade carbon fiber, also known as dry carbon. The Sparco QRT-C Carbon was designed specifically for a larger driver, comfortably fitting a driver with up to a 36-inch waist. However, the Sparco QRT-C Carbon has a unique trick up its sleeve. Although it was designed to fit a larger driver, its intelligent design allows for excellent fitment into smaller cockpits. The Sparco QRT-C uses Sparco's special QRT Side Mounts (#600QRT) which allow the seat to be racked back into a very comfortable seating position. The Sparco QRT-C Carbon is FIA approved. What Is Sparco's QRT Technology? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Carbon Racing Seat Details: Manufacturer: Sparco Manufacturer part no.: 008025ZNR Construction: Ultra-light carbon fiber Weight: 12.0 lbs (5.5 kg) fully trimmed Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved Sparco QRT-C Racing Seat Dimensions:

Sparco EVO Carbon Fiber Racing Seats As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. Sparco EVO Racing Seat Sizes The Sparco EVO series is among the most versatile competition seats we carry, available in the following three sizes to ensure proper fitment: EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – X-Large (38” waist) Sparco EVO QRT Racing Seat Features Ultralight Pre-Preg Carbon Fiber shell Excellent fitment into small vehicle cockpits Three sizes: Standard (medium), Large and XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions Dimensions EVO Standard Dimensions: EVO L / XL Dimensions:

Sparco QRT-K Carbon Kevlar Racing Seat The QRT-K is a full Carbon Kevlar version of the QRT-R. The QRT-K looks amazing with the exposed yellow/black Carbon Kevlar weave. The QRT-K is one of the lightest seats on the market. The QRT-K weighs 13.5lbs fully trimmed (with padding, cover and harness guides) and is constructed from “Pre-Preg” aerospace grade Carbon Kevlar. The QRT-K was specifically designed for a larger driver and it can fit a 36” waist (pants size) driver. The QRT-K is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits. The QRT-K requires the special QRT Side mounts (#600QRT) which allows the seat to be raked back for a comfortable ergonomic seating position. The QRT-K is FIA 8855-1999 approved. Sparco QRT-K Carbon Kevlar Racing Seat Size Large fits up to a 36” waist (pants size) What Is Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies to produce maximum strength with minimum weight. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-K Carbon Kevlar Racing Seat Technology Ultralight Carbon Kevlar Composite Shell - 13.5lbs including cover and padding Visible carbon kevlar weave Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA 8855-1999 approved Dimensions

Sparco QRT Performance Racing Seat Amazingly Light. Supremely Comfortable. The Sparco QRT Performance seat represents the luxury evolution of Sparco's revolutionary QRT-R race seat. The QRT-R was the first seat to feature Sparco’s patented lightweight QRT technology, and the QRT Performance uses the same FIA race shell but is covered in rich Italian leather and Alcantara. Each Sparco QRT Performance is hand-stitched in the Sparco OEM factory in Torino, Italy. The QRT Performance has a unique CAD design featuring a lower seating position for taller drivers while maintaining exterior dimensions that fit into smaller cockpits. The QRT Performance holds the driver securely on the race track and is also comfortable for long trips on the road. Experience Sparco's Innovative QRT Technology Sparco QRT technology yields an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. This translates to an average weight savings of 30% when compared to standard fiberglass technology. So Sparco QRT racing seats approach the weight of carbon fiber at the price of fiberglass composite. The Sparco QRT Performance Racing Seat requires the Sparco #600QRT side mounts for proper installation. Sparco QRT Performance Racing Seat Features FIA 8855-1999 approved OEM Italian leather and Alcantara Ultra-light QRT fiberglass composite shell reduces weight up to 30% Lower seating position can fit taller/larger drivers Smaller outer dimensions for improved vehicle fitment Available in Black or Red Dimensions

Sparco EVO QRT Performance Racing Seats The Sparco EVO QRT Performance updates the iconic EVO with leather/Alcantara upholstery and QRT ultra-light construction. Slimmed shoulder bolsters improve fit in small cars, lower sides ease entry and exit, and raised harness slots improve belt routing—keeping drivers comfortable and planted on street or track. The EVO QRT series offers generous back-angle rake for long-stint comfort and is available in cloth or vinyl. FIA approved. Sizing EVO S — Small (up to 32" waist) EVO — Medium (up to 34" waist) EVO L — Large (up to 36" waist) EVO XL — Extra Large (up to 38" waist) What is Sparco QRT? Developed in Italy, QRT is a patented process that produces the lightest fiberglass composite shells on the market—up to 30% lighter than traditional methods—delivering a carbon-like weight at a fiberglass price. Key Features QRT ultra-light fiberglass composite shell Excellent fitment for compact cockpits Four sizes for precise fit (S to XL) Supportive ergonomics with raised harness guides Fire-retardant, high-grip fabrics FIA 8855-1999 approved Dimensions EVO S EVO (Standard) EVO L / EVO XL