430 Challenge

Ferrari F430 Challenge Front Rotors Upgrade your Ferrari F430 Challenge with Girodisc 2-piece front rotors—precision-engineered to replace the stock carbon-ceramic system with a lighter, more durable iron design. Built for endurance and performance, these rotors maintain factory brake balance while delivering the superior thermal management and serviceability demanded by track-focused drivers. Each Girodisc rotor features a 6061-T6 aircraft-grade aluminum hat mated to Girodisc’s proprietary cast-iron rotor ring. The curved vane design acts as a centrifugal pump, drawing air through the disc to reduce heat and maintain consistent stopping power lap after lap. All components are designed, cast, and machined in-house in the USA for unrivaled quality and precision. Iron Strength, Race-Proven Cooling Vehicle Fitment Ferrari F430 Challenge Also compatible with carbon-ceramic brake (CCM) conversions on F430 platforms Girodisc A1-102 Features Direct OEM replacement: Fits factory calipers with no modifications required. Pad compatibility: Designed for use with pads having ≤66mm annulus for optimal weight and performance. Curved vane design: Promotes efficient airflow through the rotor for enhanced cooling and fade resistance. Floating 2-piece construction: Allows thermal expansion while maintaining even pad contact. Anti-noise hardware: Spring washers eliminate rattle while preserving float capability. Made in the USA: Fully machined, heat-treated, and assembled by Girodisc. Girodisc A1-102 FAQs Do these rotors fit the OEM Ferrari calipers? Yes, they bolt directly to factory F430 Challenge calipers with no modifications. Do I need special brake pads? You’ll need pads with a 66mm or smaller swept area, a common spec for 6-piston Brembo calipers. Are these rotors lighter than stock? Yes. They maintain a balance between weight reduction and improved heat capacity for optimal lap performance. Do they reduce brake fade? Absolutely. The curved vane system rapidly dissipates heat to prevent fade during repeated high-speed braking. How are they sold? Sold and priced per pair. Bring race-ready precision to your Ferrari F430 Challenge with Girodisc front rotors—crafted to perform under the most demanding conditions while offering serviceable, long-term reliability.

Girodisc Ferrari F430 Challenge Rear Rotors Purpose-built for the Ferrari F430 Challenge, these Girodisc rear rotors deliver uncompromising braking performance, thermal stability, and serviceability for track environments. Designed as a direct replacement for the original rotors, they provide improved cooling and reduced unsprung mass while maintaining OEM fit and balance. Vehicle Fitment Ferrari F430 ChallengeDirect OEM replacement for factory iron rear rotorsCompatible with original Brembo race calipers and hardware. Track-Tested Engineering The Girodisc system bolts directly to factory hubs with no modifications required. Each rotor features a precision-machined 6061-T6 aluminum hat mated to Girodisc’s proprietary cast-iron friction ring—poured, machined, and assembled entirely in the USA. The curved vane internal design acts as a centrifugal pump, pulling air through the rotor to keep temperatures stable under prolonged braking loads. The floating hardware maintains even pad contact, improves modulation, and prevents warping, ensuring reliability through long race sessions. Features • Direct OEM replacement – bolts to factory hardware• 6061-T6 billet aluminum hats with hard-anodized finish• Proprietary high-carbon cast-iron rings for exceptional durability• Floating mount system with cadmium-plated steel drive pins• Anti-noise spring washers eliminate rattle while maintaining float• Curved vane design optimizes airflow and cooling efficiency• Fully rebuildable – replace only the iron rings when worn• Manufactured and assembled in the USA• Sold/priced per pair Girodisc A2-102 Rear Rotor FAQs: Are these rotors a direct fit for the Ferrari F430 Challenge? Yes. They are designed as a precise bolt-on replacement using the stock Brembo racing calipers and factory hardware. Do I need to modify my brake system? No. The Girodisc rotors maintain the OEM dimensions, ensuring perfect compatibility with your existing setup. Can these be used on street-driven F430 models? These are specifically designed for track-only Challenge cars; for road-going F430 models, Girodisc offers a separate rotor fitment. What are the advantages over stock rotors? Girodisc rotors offer better cooling, lighter weight, and a rebuildable design—ideal for endurance and sprint racing applications. Equip your Ferrari F430 Challenge with Girodisc rear rotors—precision-engineered for endurance, balance, and unmatched performance on the circuit.

Girodisc Ferrari 398mm Front Replacement Rings Restore peak braking performance on your Ferrari with Girodisc 398mm front replacement rings. These high-carbon iron friction rings are designed to bolt directly to your existing Girodisc two-piece rotor hats, offering a precise fit and consistent stopping power for both street and track applications. GiroDisc D1-111 Replacement Rotor Disc Vehicle Fitment Compatible with: Ferrari F12 Berlinetta Ferrari 458 Italia Ferrari 458 Speciale Ferrari 488 GTB / Spider Ferrari F8 Tributo Note: These are replacement rings only. They attach directly to your existing Girodisc aluminum hats using the included hardware. Track-Ready Performance and Quality Each Girodisc 398mm replacement ring is cast and machined in the USA using a proprietary high-carbon iron alloy that delivers superior heat stability and minimal distortion under extreme braking. The directional curved vane design acts as a centrifugal air pump, dramatically improving cooling efficiency and fade resistance. Whether you’re on the street or at the track, Girodisc ensures consistent pedal feel and reliable braking lap after lap. GiroDisc D1-111 Replacement Rotor DiscFeatures • Direct replacement for 398mm Girodisc front rotor assemblies• Compatible with OEM Ferrari calipers• High-carbon cast iron improves thermal stability and wear resistance• Curved vane internal design for optimal cooling• Precision balanced and machined in the USA• Includes complete new hardware kit• Sold/priced per pair GiroDisc D1-111 Replacement Rotor Disc Specifications • Diameter: 398mm• Position: Front• Material: High-carbon cast iron• Includes new hardware• Made in the USA• Sold/priced per pair Girodisc D1-111 Replacement Ring FAQs Do these fit the OEM Ferrari carbon-ceramic setup? No, these replacement rings are designed only for Girodisc two-piece iron conversions. OEM carbon-ceramic systems require a full iron-conversion kit. Will these work with my factory calipers? Yes, these are engineered to retain the OEM Ferrari calipers and maintain proper brake bias and pedal feel. Are new hats required? No. The Girodisc two-piece system allows re-use of your aluminum hats, making future rebuilds more cost-effective. Do the rings include hardware? Yes, each pair includes new floating pin and bolt hardware for proper installation. Refresh your Ferrari’s braking performance with Girodisc D1-111 398mm front replacement rings — engineered for precision, cooling efficiency, and endurance-grade reliability.

Girodisc Ferrari F430 Challenge Rear Replacement Rings Maintain the precision braking performance of your Ferrari F430 Challenge with Girodisc rear replacement rings. These high-carbon iron friction rings are direct replacements for your existing Girodisc two-piece rotor assemblies, designed to restore original stopping power and fade resistance for both track and competition use. Vehicle Fitment Compatible with:• Ferrari F430 ChallengeNote: These are replacement friction rings only. They mount directly to existing Girodisc aluminum hats using the included hardware kit. Track-Proven Durability The Girodisc D2-102 rings are precision-machined from a proprietary high-carbon iron alloy, offering improved heat dissipation, stable coefficient of friction, and excellent crack resistance under repeated hard braking. The curved vane design acts as a centrifugal air pump, keeping your brakes cooler and more consistent during extended lapping or endurance events. Manufactured and balanced in the USA, Girodisc replacement rings ensure long-term performance and serviceability for your F430 Challenge. Features • Direct replacement for Girodisc rear rotor assemblies• High-carbon cast iron ensures consistent performance under heat• Curved vane internal design promotes efficient cooling• Includes complete hardware kit for reassembly• Designed for Girodisc aluminum hats only• Machined and finished in the USA• Sold/priced per pair Specifications • Application: Rear axle• Vehicle: Ferrari F430 Challenge• Material: High-carbon cast iron• Includes new hardware• Made in the USA• Sold/priced per pair Girodisc D2-102 Replacement Ring FAQs Are these compatible with the standard Ferrari F430? No. These replacement rings are engineered for the F430 Challenge application and are not compatible with standard F430 street car brake systems. Do these rings include new hardware? Yes, each set includes new drive pins, washers, and fasteners required for proper assembly to your existing Girodisc hats. Do I need to replace the aluminum hats? Not unless they are damaged or worn. The Girodisc two-piece design allows the hats to be reused with new rings, reducing long-term maintenance cost. Can these be used for endurance racing? Absolutely. Girodisc components are designed for demanding track environments and offer proven reliability in high-temperature racing conditions. Restore factory-level braking precision to your Ferrari F430 Challenge with Girodisc D2-102 rear replacement rings — precision-crafted for performance, consistency, and long-term serviceability.

Pagid Racing Brake Pad Shape 8091 Fitment Guide for Pagid 8091 Brake Pad Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 2015 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 2009 - 13 X Chevrolet Corvette C6 Brembo [6-piston iron rotors] 2009 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 2015 + X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 2007 - 10 X Ferrari 458 Italia [ceramic brakes] 2010 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 2016 + X Ferrari 599 GTB Fiorano [iron rotors] 2006 - 12 X Ferrari Several ceramic (CCM) brakes X McLaren 570S [ceramic brakes] 2015 + X McLaren 650S / Spyder [ceramic brakes] 2014 - 17 X McLaren 675LT [ceramic brakes] 2015 + X McLaren MP4-12C [ceramic brakes] 2011 - 14 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo XA5.71.xx 6-piston D85 16mm 8091   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. In the 8091 pad shape, the RSL 1 comes in an RSL 1 Special compound, both specified for Brembo and Ford Multimatic applications. Pagid RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.

Performance Friction PFC 1395 Racing Brake Pads Performance Friction PFC 1395 Racing Brake Pad Fitment Guide Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 2015 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 2009 - 13 X Chevrolet Corvette C6 Brembo [6-piston iron rotors] 2009 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 2015 + X Ferrari 430 Challenge [ceramic brakes] 2007-09 X Ferrari 430 Scuderia [ceramic brakes] 2008 - 09 X Ferrari 458 Italia [ceramic brakes] 2010 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 2016 - 23 X Ferrari 599 GTB Fiorano [iron rotors] 2006 - 12 X Ferrari Several ceramic (CCM) brakes X McLaren 570S [ceramic brakes] 2015 + X McLaren 650S / Spyder [ceramic brakes] 2014 - 17 X McLaren 675LT [ceramic brakes] 2015 + X McLaren MP4-12C [ceramic brakes] 2011 - 14 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo XA5.71.xx 6-piston D85 16mm 8091   The Performance Friction PFC 1395 racing brake pad is designed for compatible high-performance brake calipers used in demanding track and motorsport applications. Measuring 189.6 mm wide by 97 mm high, with an 85 mm friction material depth and 17 mm overall thickness, the PFC 1395 features a wide friction surface, distinctive retaining geometry, and two friction grooves. Available at Competition Motorsport in PFC 11 and PFC 331 racing compounds, the 1395 pad shape gives drivers two different approaches to braking performance. Whether you prefer the smooth, progressive characteristics of Compound 11 or the ABS-friendly, high-initial-bite characteristics of Compound 331, selecting the right friction material is essential for consistent braking and driver confidence. Performance Friction PFC 1395 Brake Pad Specifications Manufacturer: Performance Friction (PFC) Pad Shape: 1395 Overall Width: 189.6 mm Overall Height: 97 mm Friction Material Depth: 85 mm Pad Thickness: 17 mm Available Compounds: PFC 11 and PFC 331 Applications: Compatible motorsport brake calipers requiring the 1395 pad shape PFC 11 Racing Compound – Smooth Bite and Progressive Braking Performance Friction Compound 11 is a racing friction material developed for sprint and medium-distance competition. Known for its smooth initial bite and increasing friction characteristics as temperature rises, PFC 11 provides a progressive braking response for drivers who prioritize predictable pedal feel and precise modulation. Compound 11 is well suited to competitive road racing, advanced HPDE, and demanding track applications where repeatable braking response is essential. PFC 331 Racing Compound – High Initial Bite and ABS Compatibility Performance Friction Compound 331 is a degressive racing brake compound developed primarily for front-axle applications. It combines strong initial bite with controlled friction characteristics, making it particularly attractive for racing vehicles equipped with sophisticated ABS systems. Its degressive friction behavior is designed to support braking stability and control while offering favorable pad and rotor wear characteristics. PFC 331 is an excellent option for compatible front brake systems where ABS interaction and predictable high-performance braking are priorities. PFC 11 vs. PFC 331 – Which Compound Should You Choose? PFC 11: Smooth initial bite with friction that increases as temperature rises. Designed for sprint and medium-distance racing applications. PFC 331: Strong initial bite with degressive friction behavior. Developed for front-axle racing applications, with an emphasis on ABS compatibility and low wear. The ideal compound depends on vehicle weight, tire grip, brake balance, ABS calibration, rotor configuration, operating temperatures, and driving style. Contact Competition Motorsport for help selecting the correct PFC friction material. Why Choose Performance Friction PFC 1395 Brake Pads? Competition-focused Performance Friction braking technology 189.6 mm wide backing plate with distinctive retaining geometry 85 mm friction material depth 17 mm overall pad thickness Available in PFC 11 and PFC 331 racing compounds PFC 1395 Brake Pad Fitment and Compatibility The Performance Friction 1395 pad shape is intended for compatible brake calipers requiring its specific backing plate geometry, retaining-hole locations, friction surface dimensions, and overall thickness. Before ordering, verify the 189.6 mm width, 97 mm height, 85 mm friction material depth, and 17 mm thickness against your existing pads or the brake caliper manufacturer's technical specifications. Vehicle make and model alone may not confirm fitment, especially when aftermarket racing calipers or optional performance brake systems are installed. Buy PFC 1395 Racing Brake Pads at Competition Motorsport Competition Motorsport specializes in Performance Friction racing brake pads, high-performance braking components, and professional motorsport equipment for HPDE enthusiasts, club racers, and competitive race teams. Select your preferred PFC 1395 compound, 11 or 331, above. If you need assistance confirming pad shape compatibility or selecting the correct compound, contact our motorsports specialists before ordering.

Pagid Racing Brake Pad Shape 4906 Pagid 4906 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Dodge Viper ACR [ceramic brakes] 14 - 17 X Ferrari 360 Challenge Stradale [ceramic brakes] 03 - 05 X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Enzo [ceramic brakes] 02 - 04 X Ferrari F430 [ceramic brakes] 05 - 10 X Ferrari Several ceramic brakes CCM X Lamborghini Aventador LP700-4 [ceramic brakes] 11 - X Lamborghini Several ceramic brakes X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. These Pagid Racing Brake compounds are for ceramic rotors only. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

D2-102 Girodisc Rear Replacement Rotor Rings (Discontinued Rotor Design) Discontinued Rotor Design, Final Sale, No Returns or Excahanges FITS: FERRARI 430 CHALLENGE REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

GiroDisc 1382 Front Racing Brake Pads  Do NOT use these pads with your OEM CCB Rotors GP10 Street/Track Compounds Dominate every lap with GiroDisc D1382 Racing Brake Pads, available in GP10 for street and track day use. Whether you're chasing podiums in HPDE or logging laps in long-distance formats, GiroDisc delivers the high-performance braking you demand. The GP10 compound offers smoother torque, excellent pad life, and low rotor wear—perfect for sessions where consistency matters most. GiroDisc 1382 Brake Pad Product Highlights GP10 compound: Long-wear endurance pad with low rotor wear and excellent pedal feel Consistent performance across wide temperature ranges for both compounds D1382 pad shape fits many high-performance brake calipers GiroDisc 1382 Brake Pad Frequently Asked Questions (FAQ) What’s the difference between the GP40 and GP10 compounds? The GP40 is a high-bite sprint racing pad for aggressive braking and short sessions. The GP10 is a smoother, longer-wearing compound ideal for street and track day use. Can I daily drive with GP10 pads? GP10 is the best compromise between street and track use.   Do I need GiroDisc rotors to use these pads? Yes, pairing these pads with GiroDisc two-piece rotors is recommended for the best results. GP10-1382 Brake Pads GP10 compound is a high-performance street pad which is designed to have a smooth bite and make minimal noise at cold temperatures. Made for us by a friction technology specialist in Japan, it can be taken on track if you truly need a pad that does it all. Please note that if your car spends more time on track than the street, we would recommend stepping up to a full race pad like our GP40.

Ferodo FCP5030 Porsche Brake Pads Ferodo FCP5030 Brake pad Fitment Guide (FMSI D1395) Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Several ceramic brakes CCM X McLaren 570S [ceramic brakes] 15 - X McLaren 650S / Spyder [ceramic brakes] 14 - 17 X McLaren 675LT [ceramic brakes] 15 - X McLaren MP4-12C [ceramic brakes] 11 - 14 X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo FCP5030 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP5030 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP5030 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

GiroDisc 1001 Brake Pads for GiroDisc Iron Rotor Conversion Do NOT use these pads with your OEM CCB Rotors Choose the Brake Pad Compound That Matches Your Setup This consolidated listing groups the shared 1001 brake pad shape into one product page with compound options available as variants. Select the pad compound that best matches your street, track, sprint, or endurance braking needs. GiroDisc 1001 Brake Pad Application 1001 Shape Available Compound Variants GP10 Street — SKU GP10-1001.15 Important Fitment Note Confirm the exact compound, SKU, caliper, axle position, and brake pad application before ordering. Some variants share the same pad-shape code but may have application notes that differ slightly by compound. GiroDisc 1001 Brake Pads for 1001 Shape FAQs Why are multiple SKUs combined on this listing?These options share the same GiroDisc brake pad shape code, so they are grouped together with the pad compound selected as the variant. How do I choose the correct variant?Select the compound that matches your use case, then confirm the exact SKU and application text before checkout. Should I verify fitment before ordering?Yes. Always verify the caliper, rotor conversion, axle position, and pad-shape requirement for your specific setup. Choose the compound that fits your driving goals while keeping all matching pad-shape options in one easy-to-shop listing.

Carbotech CT1395 Brake Pads Carbotech CT1395 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Several ceramic brakes CCM X McLaren 570S [ceramic brakes] 15 - X McLaren 650S / Spyder [ceramic brakes] 14 - 17 X McLaren 675LT [ceramic brakes] 15 - X McLaren MP4-12C [ceramic brakes] 11 - 14 X Available Carbotech Compounds 1521 — High-performance street compound with low dust, low noise, and excellent release and modulation. AX6 — Autocross-focused compound with strong low-temperature bite and progressive control. XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior. XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance. XP12 — More aggressive race compound with added bite and high-temperature capability. RP2 — Endurance racing compound designed for sustained performance and strong fade resistance. XP20 — Very aggressive racing compound with high torque and extreme heat capability. XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands. How to Choose the Right Compound 1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use. Carbotech CT1395 Brake Pads FAQs How do I know if CT1395 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle. Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications. Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound. Choose the Carbotech CT1395 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.

Castrol React SRF Racing Brake Fluid Ultra-High Wet Boiling Point Makes Castrol SRF A Standout Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance. The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids! Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications. Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid. Castrol React SRF Racing Brake Fluid Typical Properties: Dry Boiling Point: 590°F (310°C) Wet Boiling Point: 518°F (270°C) Superior anti-vapor lock properties One-liter (1000ml) bottle