A1-104 Girodisc Honda S2000 Front Rotors
$1,309.00
Honda S2000 Front Rotors
Enhance the stopping power and control of your Honda S2000 with Girodisc 2-piece floating front rotors. Designed as a direct-fit upgrade for the factory discs, these rotors bolt on with no modifications required while maintaining factory brake bias and ABS function. The result is sharper response, reduced fade, and a significant drop in unsprung weight—ideal for both spirited street driving and competitive track sessions.
Each rotor combines a precision-machined 6061-T6 aluminum hat with Girodisc’s proprietary high-carbon cast iron rings. The internal curved vane design acts as a self-cooling air pump, pulling air through the rotor under braking to reduce heat buildup and extend component life.
Precision Cooling Meets Honda S2000 Performance
Vehicle Fitment
Honda S2000 (AP1 & AP2, 2000–2009)
Girodisc A1-104 Features
Direct replacement fit: Bolts directly to OEM calipers using factory hardware.
Reduced unsprung weight: Lightweight aluminum hats improve handling and suspension response.
Curved vane ventilation: Actively circulates cooling air to stabilize rotor temperatures under heavy braking.
Floating 2-piece system: Allows heat expansion without distortion, maintaining even pad wear.
Noise-free design: Spring washers eliminate rattle while preserving float capability.
Made in the USA: Every component is machined and assembled in-house by Girodisc.
Girodisc A1-104 FAQs
Are these rotors a direct fit for the OEM calipers? Yes, they’re designed to bolt right up with no modifications or additional parts needed.
Do they improve braking performance? Absolutely. Expect better heat management, consistent pedal feel, and shorter stopping distances.
Can they be used on the street? Yes. They’re street-friendly while delivering race-ready performance when pushed hard.
Will I need new brake pads? You can use your preferred performance pad compound—OEM or aftermarket options work perfectly.
How are they sold? Sold and priced per pair.
Step up your Honda S2000’s braking system with Girodisc front rotors—lightweight, track-proven, and built to deliver flawless performance mile after mile.
D1-104 Girodisc Honda S2000 Front Replacement Rings
$815.00
D1-104 Girodisc Honda S2000 Front Rings
Restore your Honda S2000’s braking precision with Girodisc D1-104 328mm front replacement rings. These precision-engineered components bolt directly to your existing Girodisc aluminum hats using the included floating hardware kit. Each rotor ring is machined from Girodisc’s proprietary high-carbon cast iron, delivering outstanding heat capacity, improved modulation, and fade-free braking for both street driving and track use.
Vehicle Fitment
Compatible with:• Honda S2000 AP1 (2000–2003)• Honda S2000 AP2 (2004–2009)Note: Designed exclusively for Girodisc 328mm two-piece front rotor systems. Not compatible with OEM one-piece rotors.
Features
• Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 328mm two-piece front rotors• CNC-machined from high-carbon cast iron for maximum heat resistance and durability• Directional curved vanes improve cooling and airflow under heavy braking• Maintains OEM brake bias, ABS, and stability calibration• Balanced for smooth, vibration-free braking• Designed exclusively for Girodisc aluminum hats
Specifications
• Diameter: 328 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and new hardware kit• Sold/priced per pair
Girodisc D1-104 Honda S2000 Front Ring FAQs
Do these fit OEM Honda S2000 rotors? No. These are replacement rings for Girodisc two-piece systems and will not fit factory one-piece rotors or hats.
What pad compounds work best with these rotors? For daily and spirited driving, Ferodo DS2500 or Hawk HPS 5.0 are ideal. For track events, Pagid RS29 or Project Mu Club Racer pads deliver excellent heat control and bite.
Are these rotors directional? Yes. Each rotor is labeled for left and right installation to ensure proper airflow through the curved vane structure for optimal cooling.
What torque should I use on the floating hardware? Torque each bolt to 12 ft-lbs (16 Nm) with blue Loctite. Recheck torque after the first heat cycle for proper fitment and safety.
Upgrade your Honda S2000’s braking system with Girodisc D1-104 328mm front replacement rings — engineered for lightweight performance, superior cooling, and track-ready durability.
Performance Friction PFC 0829 Racing Brake Pads
$542.00
Performance Friction PFC 0829 Brake Pads
Performance Friction PFC 0829 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Honda
Civic Type R/ S2000/RSX
1999 - 2005
X
Honda
S2000 (AP1 & AP2)
1999 - 2009
X
Acura
RSX/RSX Type S
2002 - 06
X
The Performance Friction PFC 0829 racing brake pad combines precision backing plate geometry with the smooth, progressive braking characteristics of PFC Compound 11. Designed for compatible high-performance brake calipers, the 0829 pad shape measures 135 mm wide by 52 mm high and features a 16 mm friction material thickness, excluding the steel backing plate.
Available from Competition Motorsport in PFC 11 racing compound, the 0829 is an excellent option for drivers seeking predictable initial bite, strong braking performance, and precise modulation during demanding track sessions and motorsport competition.
PFC 0829 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 0829
Overall Width: 135 mm
Overall Height: 52 mm
Friction Material Thickness: 16 mm (excluding backing plate)
Available Compound: PFC 11
Compound Application: Sprint and medium-distance racing
Intended Use: HPDE, track days, club racing, and motorsport
The PFC 0829 features a curved upper friction edge, a centrally divided friction surface, and distinctive lateral backing plate tabs. Its specialized geometry makes accurate pad shape identification essential when selecting replacement racing brake pads.
PFC Compound 11 – Smooth Initial Bite and Progressive Friction
Performance Friction Compound 11 is a competition-focused friction material developed for sprint and medium-distance racing. Known for its smooth initial bite and friction characteristics that increase with temperature, PFC 11 delivers a progressive braking response for drivers who prioritize pedal control and predictable modulation.
Unlike racing compounds that emphasize an aggressive initial braking response, Compound 11 provides a smoother transition into braking, allowing drivers to precisely manage deceleration and brake release.
Its temperature-responsive friction characteristics make PFC 11 particularly attractive for demanding road racing environments where consistent performance during repeated heavy braking is essential.
Benefits of PFC 11 Racing Brake Compound
Smooth Initial Bite: Progressive braking response for controlled deceleration.
Temperature-Responsive Friction: Friction increases as operating temperature rises.
Excellent Modulation: Predictable pedal response helps drivers precisely control braking effort.
Sprint Racing Performance: Developed for demanding short- and medium-distance competition.
Motorsport-Focused Design: Engineered for compatible high-performance racing brake systems.
Why Choose Performance Friction PFC 0829 Brake Pads?
The PFC 0829 combines a 135 mm overall width with a 52 mm overall height and a distinctive backing plate configuration. Its curved friction profile and central groove distinguish it from other racing brake pad shapes.
Performance Friction has developed advanced braking systems and friction materials for professional motorsport, making PFC an established choice among competitive drivers and racing teams.
PFC 0829 Brake Pad Fitment and Compatibility
The Performance Friction 0829 brake pad is intended for calipers requiring its specific backing plate shape, mounting features, and friction material dimensions.
Before ordering, compare your existing brake pads with the PFC 0829 technical drawing. Confirm the 135 mm overall width, 52 mm overall height, 16 mm friction material thickness, and backing plate geometry.
The 16 mm thickness measurement excludes the steel backing plate and should not be confused with the complete assembled brake pad thickness.
Vehicle make and model alone may not establish compatibility, particularly when aftermarket racing calipers or optional performance brake packages are installed.
Frequently Asked Questions About PFC 0829 Brake Pads
What compound is available for the PFC 0829 brake pad?
Competition Motorsport offers the PFC 0829 pad shape in Performance Friction Compound 11, a racing friction material developed for sprint and medium-distance competition.
What are the characteristics of PFC Compound 11?
PFC 11 features smooth initial bite and friction that increases as operating temperature rises. It is designed to provide progressive braking response and precise modulation in racing applications.
Is the PFC 0829 suitable for track days?
Yes, when the pad shape is compatible with the vehicle's brake calipers and the compound is appropriate for the vehicle's braking requirements and operating temperatures.
Does the 16 mm thickness include the backing plate?
No. The 16 mm measurement refers to the friction material thickness only. The steel backing plate is excluded.
Can PFC 0829 Compound 11 brake pads be used on the street?
PFC 11 is a competition-oriented friction compound primarily intended for motorsport use. Racing brake pads may produce additional noise and dust and may not provide ideal braking characteristics at normal street operating temperatures.
Buy PFC 0829 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, high-performance braking components, and professional motorsport equipment for HPDE enthusiasts, track-day drivers, club racers, and competitive race teams.
Order PFC 0829 brake pads in Compound 11 for your compatible braking system, or contact our motorsports specialists for assistance confirming fitment and selecting the appropriate racing brake components for your application.
Pagid 8010 Racing Brake Pads
$502.00
Pagid Racing Brake Pad Shape 8010
Pagid 8010 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Honda
Civic Type R/ S2000/RSX
1999 - 2005
X
Honda
S2000 (AP1 & AP2)
1999 - 2009
X
Acura
RSX/RSX Type S
2002 - 06
X
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Goodridge G-Stop Stainless Brake Lines | Honda S2000 AP2 (2006-09)
$379.00
Goodridge G-Stop High Performance Stainless Brake Lines
This Kit Fits the Honda S2000 AP2 (2006-09)
Goodridge G-Stop high performance brake lines for the Honda AP2 S2000 consist of the finest quality PTFE inner hose covered by a braided stainless steel outer casing. This gives you a much firmer, more responsive brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, making them ideal for the very high brake pressures seen during HPDE track days. G-Stop High Performance Brake lines are abrasion and corrosion resistant so they last a long time under harsh conditions.
Goodridge G-Stop high performance brake lines are direct bolt-on replacements for all of the rubber brake lines in your S2000's brake system1. Four brake lines are included in each kit, with hose ends and brake line brackets that match the car’s original equipment.
Conforming to Federal Motor Vehicle Safety Standard Number 106, Goodridge G-Stop high performance brake lines are U.S. DOT certified and T.U.V. approved. All Goodridge G-Stop brake lines go through a nine-point Quality Assurance testing process that includes measuring tensile strength and the ability to sustain line pressures to 3,000 psi.
Goodridge G-Stop Stainless Brake Line Details:
Precise fit for your Honda S2000 AP2
Greater braking efficiency
Resistance to abrasion and corrosion
Firmer pedal under heavy braking
Added reliability, safety and brilliant looks
Technically superior and race proven
DOT, TUV, ADR, DEKRA, ARAICCC, ISO9001 Accredited. FMVSS 106 compliant
DOT approved
1 Note: Brake components should be installed by a competent mechanic in a professional manner. Incorrect installation of brake components can be a major safety hazard.
Goodridge G-Stop Stainless Brake Lines | Honda S2000 AP1 (2000-05)
$379.00
Goodridge G-Stop High Performance Stainless Brake Lines
This Kit Fits the Honda S2000 AP1 (2000-05)
Goodridge G-Stop high performance brake lines for the Honda AP1 S2000 consist of the finest quality PTFE inner hose covered by a braided stainless steel outer casing. This gives you a much firmer, more responsive brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, making them ideal for the very high brake pressures seen during HPDE track days. G-Stop High Performance Brake lines are abrasion and corrosion resistant so they last a long time under harsh conditions.
Goodridge G-Stop high performance brake lines are direct bolt-on replacements for all of the rubber brake lines in your S2000's brake system1. Four brake lines are included in each kit, with hose ends and brake line brackets that match the car’s original equipment.
Conforming to Federal Motor Vehicle Safety Standard Number 106, Goodridge G-Stop high performance brake lines are U.S. DOT certified and T.U.V. approved. All Goodridge G-Stop brake lines go through a nine-point Quality Assurance testing process that includes measuring tensile strength and the ability to sustain line pressures to 3,000 psi.
Goodridge G-Stop Stainless Brake Line Details:
Precise fit for your Honda S2000 AP1
Greater braking efficiency
Resistance to abrasion and corrosion
Firmer pedal under heavy braking
Added reliability, safety and brilliant looks
Technically superior and race proven
DOT, TUV, ADR, DEKRA, ARAICCC, ISO9001 Accredited. FMVSS 106 compliant
DOT approved
1 Note: Brake components should be installed by a competent mechanic in a professional manner. Incorrect installation of brake components can be a major safety hazard.
Ferodo FCP1444 Brake Pads
from $374.00
Ferodo FCP1444 Brake Pads
Ferodo FCP1444 Brake pad Fitment Guide
Make
Model
Engine
Years
Front Pad Shape
Rear Pad Shape
Honda
Civic VII 1.7 CTDi
1.7 Diesel
2002–2005
FCP1444
FCP956
Honda
Civic VII Type R
2.0
2001–2005
FCP1444
FCP956
Honda
Civic VII 2.0 Sport
2.0
2004–2005
FCP1444
FCP956
Honda
Civic VIII Type R
2.0
2006+
FCP1444 / FRP3105*
FCP1862
Honda
S2000
2.0 16V
1999+
FCP1444
FCP956
Ferodo DS1.11 Brake Compound Details
The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel.
The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency.
This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel.
Exceptional fade resistance for track use
Long wear characteristics in endurance-style driving
Progressive, controllable pedal feel
Excellent choice for HPDE and racing applications
Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use.
Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners.
Ferodo DS2500 Compound Details
Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat.
The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice.
The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars.
Strong cold bite for street use
Low noise when properly bedded
Excellent fade resistance for a dual-purpose pad
Great match for performance street tires
Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement.
Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad.
Ferodo DS3000 Brake Compound Details
The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear.
Ferodo FCP1444 Comparison Chart
Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see.
Ferodo FCP1444 Coefficient of Friction (Mu) Comparison Chart
In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged.
Ferodo FCP1444 Operating Temperature Comparison Chart
Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.
Ferodo brake pad applications include Honda Civic Type R, Civic Sport, Civic CTDi, and Honda S2000 models. Front pad shapes include Ferodo FCP1444 and FRP3105 depending on model and brake package, while rear applications use Ferodo FCP956 or FCP1862. Compatible with Honda performance and sport models produced from 1999 onward.
Compatible Vehicles
1999+ Honda S2000 2.0 16V
2006+ Honda Civic VIII Type R (FN2)
Honda Civic Type R Brake Pads
Honda S2000 Brake Pads
Ferodo FCP1444
Ferodo FCP956
Ferodo FCP1862
Ferodo FRP3105
Honda Front Brake Pads
Ferodo FCP0956 Brake Pads
from $331.00
Ferodo FCP0956 Brake Pads
Ferodo DS1.11 Brake Compound Details
The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel.
The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency.
This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel.
Exceptional fade resistance for track use
Long wear characteristics in endurance-style driving
Progressive, controllable pedal feel
Excellent choice for HPDE and racing applications
Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use.
Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners.
Ferodo DS2500 Compound Details
Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat.
The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice.
The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars.
Strong cold bite for street use
Low noise when properly bedded
Excellent fade resistance for a dual-purpose pad
Great match for performance street tires
Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement.
Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad.
Ferodo DS3000 Brake Compound Details
The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear.
Ferodo FCP0956 Comparison Chart
Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see.
Ferodo FCP0956 Coefficient of Friction (Mu) Comparison Chart
In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged.
Ferodo FCP0956 Operating Temperature Comparison Chart
**Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**
Cobalt D536 Brake Pads
$328.00
Cobalt D536 Brake Pads
Cobalt D536 Brake Pad Fitment Guide
Make
Model
Engine
Years
Front Pad Shape
Rear Pad Shape
Honda
S2000
2.0 16V
2000-2009
X
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Carbotech CT829 Brake Pads
from $294.00
Carbotech CT829 Brake Pads
Carbotech CT829 Brake Pad Fitment Guide
Make
Model
Engine
Years
Front Pad Shape
Rear Pad Shape
Honda
Civic VII 1.7 CTDi
1.7 Diesel
2002–2005
X
Honda
Civic VII Type R
2.0
2001–2005
X
Honda
Civic VII 2.0 Sport
2.0
2004–2005
X
Honda
Civic VIII Type R
2.0
2006+
X
Honda
S2000
2.0 16V
1999+
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT829 Brake Pads FAQs
How do I know if CT829 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT829 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.
Carbotech CT537 Brake Pads
from $251.00
Carbotech CT537 Brake Pads
Carbotech CT537 Brake Pad Fitment Guide
Make
Model
Engine
Years
Front Pad Shape
Rear Pad Shape
Honda
S2000
2.0 16V
2000-2009
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT527 Brake Pads FAQs
How do I know if CT527 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT527 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.
AP Racing Radi-CAL R4 Racing Brake Fluid (500 ml)
$60.00
AP Racing Radi-CAL R4 Racing Brake Fluid
Among the Highest Dry Boilings Point On The Market Today
AP Racing Radi-CAL R4 racing brake fluid has an ultra-high typical dry boiling point, at 644º F / 340º C. Radi-CAL R4 racing brake fluid has been designed to perform better than any other product at the extremes of heavy-duty braking in top levels of professional racing.
AP Racing Radi-CAL R4 has outstanding resistance to vapor lock and pedal fade under the most exacting conditions. A higher vapor lock point means a firmer brake pedal at the extremes of brake temperatures. Enhanced lubricity means R4 is a better lubricant than other market-leading racing brake fluids. This helps extend the life of the metal moving parts in your brake system while increasing system efficiency.
Radi-CAL R4 can be mixed with other DOT 3 and DOT 4 racing brake fluid, although for maximum performance your braking system should be thoroughly purged with R4 fluid.
AP Racing Radi-Cal Pro R4 Brake Fluid Details:
Manufacturer: AP Racing
Manufacturer part number: AP-CP7005
DOT rating: DOT 4
Dry Boiling Point: 644º F / 340º C
Wet Boiling Point: 383º F / 195º C
Bottle Size: 500 ml (16.9 fl. oz.)
AP Racing Radi-CAL R3 Racing Brake Fluid (500 ml)
$46.00
AP Racing Radi-CAL R3 Racing Brake Fluid
Designed for the Top Levels of Motorsports
AP Radi-CAL R3 Racing Brake Fluid was developed for use in very-high-temperature racing conditions. It conforms to or exceeds FMVSS 116, DOT 4, SAE J1703 and J1704 standards. AP Racing Radi-CAL R3 Racing Brake Fluid is one of the most popular brake fluids at the highest levels of professional auto and motorcycle racing. It was specifically developed for coping with extraordinary temperatures, such as those encountered when running a carbon/carbon composite brake system.
To ensure that the fluid stays fresh, AP brake fluids are furnished in 500 ml (16.9 oz) easy-pour plastic bottles with double-sealed caps. When switching your fluid to AP Racing Radi-CAL R3, we recommend purging all of the old fluid from the system. Three to four bottles of fluid are enough to completely replace existing brake fluid and still have enough left over for a bleed at the track to remove any remaining air bubbles.
AP Racing Radi-CAL R3 Brake Fluid Details:
Manufacturer: AP Racing
Manufacturer part number: AP-CP5660
UPC: 48238040081
DOT Rating: DOT 4
Dry Boiling Point: 617º F / 325º C
Wet Boiling Point: 383º F / 195º C
Compatible with other DOT 4 fluids: yes
Bottle size: 500 ml (16.9 fl oz)
AP Racing Radi-CAL R1 Racing Brake Fluid (500 ml)
$28.00
AP Racing Radi-CAL R1 Racing Brake Fluid
Brake Fluid Suitable for All Forms of Motorsport
AP Racing Radi-CAL R1 DOT 4 racing brake fluid was developed for road cars being used in events such as autocross and track days, where drivers need brake fluid with a higher boiling point than that of standard OEM brake fluid.
While AP Racing Radi-CAL R1 fluid has the lowest dry boiling point of AP Racing's racing brake fluid lineup at 516º F (269º C), it far exceeds that of ordinary DOT 4 brake fluid. It was developed for applications needing more heat resistance than typical OEM brake fluid.
AP Racing Radi-CAL R1 Brake Fluid Details:
Manufacturer: AP Racing
Conforms to FMVSS 116 DOT3 specification
Manufacturer part number: AP-CP7551
New Dry Boiling Point: 516º F / 269º C
Wet Boiling Point: 284º F / 140º C
Bottle Size: 500 ml (16.9 fl. oz.)