FIA 8860 Carbon Helmets

Stilo Helmets ST5 GT 8860-2018 Carbon Fiber Racing Helmet The Stilo Helmet ST5 GT 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strictest FIA 8860-2018 regulations. It is also the helmet of choice for drivers who won’t compromise their safety, no matter what or where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. A Premium Racing Helmet that is Ultralight and Adaptable The Stilo Helmet ST5 GT 8860-2018 is among the lightest carbon fiber racing helmets on the market. With its two integrated side ports, it can be outfitted with any combination of electronics, side- or top-forced air, hydration, and a helmet eject system. Thanks to Stilo's innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo ST5 GT 8860-2018 has a taller and lower eyeport, giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. At Competition Motorsport, we've found that customers who typically wear a size 59 in other helmet brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5 GT 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Stilo Helmets Model number: AA0700AG1R Homologation: FIA 8860-2018 Construction: 100% medium tensile carbon Stilo HANS posts: included Sizing: Extra Small through 3XL Compatible shields: Stilo ST5 Eight ventilation holes for Stilo Helmets Top Air systems Prepped for side and front drinking systems Weight (intercom included): Small shell (54-59cm) 1.37 kg, 3.0 lbs Large shell (60-64cm) 1.47 kg, 3.2 lbs Other Great FIA 8860-2018 Helmets From Stilo Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet Stilo Helmets ST5 N ZERO 8860-2018 Carbon Helmet Measuring Your Head The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Stilo ST5 GT ZERO 8860-2018 Carbon Helmet   An Auto Racing Helmet With Zero Compromises The Stilo Helmets ST5 GT ZERO 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo Helmets ST5 GT ZERO 8860-2018 carbon helmet is the lightest-weight carbon fiber racing helmet on the market (weight listed below). It has two integrated side ports each of which can accommodate electronics, forced air, helmet eject system, or a hydration system. This innovative design incorporates mounting and routing for these options into the helmet shell, so integration is sleek and seamless. When not in use, you don't even know the side ports are there. For the "Naked" version of this helmet (without side ports), please see the Stilo Helmets ST5 N ZERO 8860-2018 Carbon Fiber Helmet. Increased Visibility is Increased Safety The Stilo ST5 GT Zero 8860-2018 carbon fiber helmet has a taller, lower eyeport giving you better visibility without compromising your safety. Each visor has a center pinch-clip so opening and closing are easy even while wearing Nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5 GT ZERO Carbon Details FIA 8860-2018 certified Small Shell Weight: 2.5 lbs (1130g) up to size L (59) with intercom Large Shell Weight: 2.7 lbs (1230g) up to size 3XL (64) with intercom All Stilo ST5 shields can be used with this helmet Includes standard HANS post anchors Includes Stilo Helmet Bag Plus HANS for your helmet and HNR Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous helmets Stilo ZERO shells are the lightest FIA 8860-2018 helmets available This helmet will ship to you with signature required for delivery.

Arai GP-7SRC ABP Carbon Racing Helmet The Best Arai Auto Racing Helmet The new Arai GP-7SRC ABP is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF’s existing benefits of high strength and extreme light weight. But there's a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of Arai GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The Arai GP-7SRC ABP meets or exceeds the FIA 8860-2018 ABP homologation standard. Advanced Ballistic Protection The Formula One Standard FIA's new ABP (Advanced Ballistic Protection) specification is intended especially for drivers in open cars. The Arai GP-7SRC ABP has been strengthened in the forehead area, incorporating an external intrusion panel (previously mounted to the shield) that is now integrated into the helmet shell itself. The ABP homologation was written to reduce the risk of injury from debris or other objects striking a driver’s head. Arai GP-7SRC ABP 8860-2018 Carbon Fiber Ventilation Three large, close-able, intake vents combined with larger 10mm holes and two additional exhaust vents in the center of the helmet greatly increase air flow. A redesigned exhaust cowling improves aerodynamics, drawing out hot air escaping the helmet. The GP-7SRC comes with all vents unattached so you can customize the vent configuration to your specific needs. Arai Positive Shield Latch Arai's positive latch mechanism provides solid shield closure while allowing normal operation of the shield. Designed as an integral component of the shield system, not just an add-on afterthought, its functional simplicity belies the complexity of the design. Installed HANS Post Anchors Included Integrated seats accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepts a variety of anchor systems, making installation easy. The flat surface around the mounting nut allows the anchor post to rest flush on the helmet surface. Arai's Most Advanced ABP Carbon Fiber Shell Available in sizes XS through Large. Arai's proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance while keeping weight and bulk to a minimum. Eject-Ready Crown Pad Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. Drink Tube Compatible The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements. This helmet will ship with signature required for delivery.

Stilo Helmets ST5 FN 8860-2018 ABP The Stilo Helmets ST5 FN 8860-2018 ABP carbon fiber helmet was designed for professional racers needing to satisfy the latest FIA 8860-2018 ABP regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. ABP is an acronym for "Advanced Ballistic Protection". The ABP replaces the zylon panel required by FIA in the previous generation (FIA 8860-2010) helmets, integrating stronger protection into the front of the helmet shell. A brand new testing procedure was introduced to evaluate this area, based on military ballistic specifications with a projectile shot at 250 km/h. The Stilo ST5 FN ABP was the first helmet to be certified to this new standard, offering a higher safety degree while maintaining dimensions and weight. The Stilo ST5 FN 8860-2018 ABP is among the lightest carbon fiber racing helmets on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, it can still be outfitted with electronics, top forced air, and a helmet eject system. Thanks to an innovative design incorporating mounting and routing for these options, integration is sleek and seamless with nothing protruding, hanging down, or otherwise getting in the way. When not in use, you don't even know they're there. Looking for increased visibility? The Stilo Helmets ST5 FN ZERO 8860-2018 has a taller and lower-placed eyeport, giving you better visibility while not compromising your safety. Every Stilo visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Stilo Helmets ST5 FN 8860-2018 ABP Note on Sizing We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo Helmets ST5 FN 8860-2018 ABP Details: FIA 8860-2018 ABP certification Includes Stilo HANS posts Competition Motorsport Stilo Owner's Kit sold separately. Significantly lighter than previous Stilo helmets Sizing from XS through 3XL Stilo ST5 shields are interchangeable across all ST5 helmets Eight top ventilation holes (can be used with the Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Made from 100% medium-tensile carbon Weight (+/-30 g): Small shell 1200g (2.6 lbs) Large shell 1320g (2.9 lbs) Optional Replacement Stilo ST5 FN FIA8860-2018 ABP Helmet Shields If you want the absolute lightest FIA 8860-2018 ABP helmet on the market, check out the amazing Stilo Helmets ST5 FN ZERO 8860-2018 ABP Carbon Helmet. This helmet will ship with signature required for delivery.

Bell Helmets HP6 8860-2018 Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Arai GP-7SRC 8860-2018     The new Arai GP-7SRC Carbon Fiber 8860-2018 auto racing helmet is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary carbon fiber weave that combines its existing properties of high strength and extreme light weight. Arai's proprietary carbon fiber has a property that standard carbon fiber does not possess: flexibility. (Standard carbon fiber tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of Arai GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The Arai GP-7SRC carbon fiber auto racing helmet meets or exceeds the latest FIA 8860-2018 homologation standards.  Additional Helmet shields for the Arai GP-7SRC helmet available here Ventilation Is Strong in the Arai GP-7SRC Carbon Large, closable intake vents combined with a 10mm vent greatly increase air intake. Larger 10mm rear vent hole increases air flow further compared to previous models. Arai's Innovative Positive Shield Latch Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design. Integrated HANS Post Anchors Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. Proprietary Carbon Fiber Shell Construction Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum. Eject-Ready Crown Pad Integrates Exceptional Safety A pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. Extremely Flexible Drink Tube Compatibility The GP-7SRC chin liner is easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements. Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Arai GP-7SRC Carbon Fiber helmet safe and secure throughout every race weekend. Getting The Best Fit for Your Arai GP-7SRC Carbon The Arai GP-7SRC 8860-2018 is available in sizes XS to Large. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell HP7 EVO III Carbon Fiber FIA 8860-2018 Helmet The Bell Racing Helmet Designed to FIA Super Helmet Standards Developed through close collaboration with leading F1 drivers and teams, the carbon fiber Bell HP7 EVO III is aerodynamically sleek, lightweight and efficient, designed to excel under the intense demands of open-wheel and open-cockpit racing. The updated Bell HP7 EVO-III meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing at the highest levels of motorsports, the Bell HP7 EVO III Carbon Fiber helmet allows racers to take advantage of technological innovations like aerospace composite materials and advanced energy absorbing liner systems. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Details: Manufacturer: Bell Helmets Model number: 11010xx Construction: High-strength and high-modulus carbon fiber ultra-light shell Color: Carbon, Matte Finish Homologation: FIA 8860-2018 Sizes: 54cm to 61+cm Interior: Advanced multi-density, multi-piece liner Visor: Optical-grade SE07 Double Screen Anti-Fog (DSAF) Ventilation: Top and chin bar ventilation system with 12 intake and extraction channels Bell HP7 EVO III Carbon Fiber Additional Features: Shell and shield optimized for aerodynamic performance, low internal noise, and impact energy management Integrated channels to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Bell HP7 Carbon Fiber helmet safe and secure throughout each a race weekend. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Interior Colors Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. This helmet will ship with signature required for delivery.

Bell HP77 8860-2018 Carbon Fiber Helmet Bell Helmets Championship Pedigree Auto Racing Helmet Based on Bell’s highly successful F1 World Champion proven HP7 design, the Bell HP77 8860-2018 provides the latest impact protection by lowering the visor opening 12 mm and reinforcing the front of the helmet with advanced ballistic protection (ABP). The HP77 is the most advanced FIA8860-2018 helmet in Bell’s line-up, setting a new standard for lightweight, aerodynamically superior carbon fiber helmet performance to meet the intense demands of open-wheel and open-cockpit racing. The Bell HP77 carbon fiber helmet is homologated to the FIA 8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The Bell HP77 carbon fiber helmet was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who considers safety of paramount importance. Bell HP77 8860-2018 Carbon Fiber Helmet Details: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm adding ballistic protection from medium-size debris High-strength and high-modulus carbon fiber shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 intake and exhaust channels Shell and shield design optimized for aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory-installed HANS anchors HP helmet bag included Color: Matte Carbon Fiber Finish Sizes: 54cm to 59+ Compatible Shields: SE077 Shield Pivot Kit: SV (SE07, SE077) Bell HP77 Interior Fabric Color Options: Custom interior fabric is available in Black, White, Red, Tan, Purple, Blue, Green or Neon Yellow. These are special order, additional charges will apply. Grey interior fabric is standard.

Stilo Helmets ST5 FN ZERO 8860-2018 Carbon Helmet The Stilo Naked Helmet With Zero Compromises The Stilo Helmets ST5 FN Zero 8860-2018 carbon helmet was designed for professional auto racers needing to satisfy the strict FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo ST5 FN Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to the innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless with nothing protruding from the helmet, hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Increased Visibility Is Increased Safety Looking for increased visibility? The Stilo ST5 FN Zero 8860-2018 has a taller, lower eye port giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5 FN ZERO Carbon Helmet Details: FIA 8860-2018 certified Small Shell Weight: 2.5 lbs (1130g) to size L(59) w/comms Large Shell Weight: 2.7 lbs (1230g) to size 3XL (64) w/comms Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL Stilo ST5 shields are interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Redesigned cheek pads are more contoured and comfortable than previous designs Stilo ZERO shells are the lightest FIA 8860-2018 helmets available For the GT version of this helmet (with integrated side ports), please see the Stilo ST5 GT ZERO 8860-2018 Carbon Fiber Helmet. This helmet will require a signature for delivery.

Stilo Helmets ST5 FN ZERO 8860-2018 ABP Carbon Helmet Stilo's Most Advanced Auto Racing Helmet The Advanced Ballistic Protection (ABP) features reinforced areas above the shield opening, which is 10mm lower and narrower than non-ABP models. In short, this is the highest specification helmet ever developed. The Stilo ST5 FN ZERO 8860-2018 ABP carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection and impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. Ultra Light Weight But Heavy On Features The Stilo ST5 FN ZERO 8860-2018 ABP is the lightest-weight carbon fiber racing helmet on the market. While it lacks the integrated side ports of the Stilo Helmets ST5 GT 8860-2018 carbon helmet, it can still be outfitted with top forced air and a helmet eject system. The innovative design incorporates mounting and routing for these options at the time of manufacture, so integration is sleek and seamless with nothing hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo Helmets ST5 FN ZERO 8860-2018 has a taller, lower-set eye port, giving you better visibility while not compromising safety. Stilo Shields use a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5 FN ZERO 8860-2018 ABP Carbon Fiber Helmet Details: FIA 8860-2018 ABP certified Small shell weight: 2.1 lbs (930g) up to size L (59) Large shell weight: 2.7 lbs (1230g) up to size 3XL (64) Includes standard HANS post anchors Includes Stilo Helmet and HANS Bag Sizing from XS through 3XL All Stilo ST5 shields are compatible with this helmet Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Stilo ZERO shells are the lightest FIA 8860-2018 ABP helmets available  Replacement Stilo ST5 FN FIA8860-2018 ABP Helmet Shields For the GT version of this helmet (with integrated side ports), please see the Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Fiber Helmet. This helmet will require a signature for delivery.

Bell Helmets HP6 8860-2018 RD-4C Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronics for ear buds (ear buds not included) Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C 8860-2018 Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Stilo Helmets ST5 FN The Stilo ST5 FN Carbon helmet is an iconic helmet used in a variety of race types. Crafted from a carbon fiber layup and exceeding the Snell SA2020 and FIA 8859 rating, this helmet is predominantly used in open cockpit environments and features an array of improvements from the ST4 Helmet Weighing in at 2.88lbs in the small shell size and 3.21lbs in the large this helmet not only looks good but will minimize neck and head strain. The ST5 FN helmet most often is use in the top level racing where every ounce matters. The FN (Formula Naked) helmet line was designed for open cockpit environments and features an aerodynamic design, while still featuring an array of features making it the go-to helmet for racing professionals. The ST5 builds upon our ST4 design with a larger eye port which opens past the line of sight and includes an 3mm clear visor coming standard with our anti-fog coating. Improvements also have been made to the interior design with removable cheek & top pads allowing drivers to obtain the perfect fit. Helmets come standard with removable earmuff cushions which provide a significantly quieter environment for the driver by isolating the ear. Other Features: All Stilo closed faced helmets come in two separate shell sizes allowing us to craft a better fitting helmet that is lighter weight. Ready for non-integrated electronics, air supply, and hydration or any combination of the three this helmet is one of the top helmets on the IMSA grid. M6 nuts pre-installed for easy FHR installation Additional accessories available such as aero, top air kits, and an array of visor options. The Stilo ST5 FN is among the lightest carbon fiber racing helmets on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, it can still be outfitted with electronics, top forced air, and a helmet eject system. Thanks to an innovative design incorporating mounting and routing for these options, integration is sleek and seamless with nothing protruding, hanging down, or otherwise getting in the way. When not in use, you don't even know they're there. Looking for increased visibility? The Stilo Helmets ST5 FN ZERO 8860-2018 has a taller and lower-placed eyeport, giving you better visibility while not compromising your safety. Every Stilo visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Stilo Helmets ST5 FN 8860-2018 ABP Note on Sizing We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo Helmets ST5 FN Details Snell SA2020 certification Includes Stilo HANS posts Competition Motorsport Stilo Owner's Kit sold separately. Significantly lighter than previous Stilo helmets Sizing from XS through 3XL Stilo ST5 shields are interchangeable across all ST5 helmets Eight top ventilation holes (can be used with the Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Made from 100% medium-tensile carbon Weight (+/-30 g): Small shell 2.9 lbs Large shell 3.2 lbs If you want the absolute lightest FIA 8860-2018 ABP helmet on the market, check out the amazing Stilo Helmets ST5 FN ZERO 8860-2018 ABP Carbon Helmet. This helmet will ship with signature required for delivery.

Sparco Prime RF-10 8860 Supercarbon The Sparco RF-10 Supercarbon: The Supercar of Helmets! Hey, racetrack royalty! Ever feel like your current helmet is more of a tortoise than a hare? Time to trade that old noggin-protector in for something more... speedy. Introducing the Sparco Prime RF-10 8860 Supercarbon Helmet - the crown jewel of racing gear. Imagine the union of sheer beauty and beastly strength - that’s the Sparco Supercarbon for you. This carbon-fiber-crafted beauty isn't just for show – it’s certified to the highest FIA standards. That means, whether you're pulling G's on the track or casually setting lap records, this bad boy is ready to rumble. Speaking of rumble, ever had your visor fog up during an intense lap? Annoying, right? The RF-10's got you covered with a crystal-clear view, thanks to its brilliant chin ventilation system. Plus, the center visor locking mechanism is like Fort Knox for your face—secure and safe. Thirsty mid-race? No worries! It's prepped to accommodate a drinks system. Yeah, you heard right. It's like a mini fridge, but for your head. This helmet isn’t just about the outside though. Inside, it's plush and comfortable. After a sweaty race, you can pop out that interior lining and give it a wash. Talk about staying fresh!  Sparco Prime RF-10 8860 Supercarbon Product Highlights: Strong visor game: comes with a clear visor. Looking for that mysterious racer vibe? Opt for the dark smoke visor (sold separately). The visor (FIA approved) can also be infinitely adjusted. Approved and certified: FIA 8860-2018 & Snell SA2020 approved. Wash and wear: Removable interior lining, because who doesn't love freshness? Stay hydrated: accommodates an optional drink system. Head and neck safety: comes with factory fitted FHR posts. Racers, it’s time to upgrade. Because while they say it’s not about the gear but the driver – well, a bit of Sparco Supercarbon magic doesn’t hurt either.  So, ready to be the envy of the track? Hit that 'Add to cart' button and let the Sparco Prime RF-10 8860 Supercarbon helmet take you to the finish line in style and safety! The Sparco Prime RF-10 8860 Supercarbon helmet is homologated to the latest and highest FIA standard currently available making this helmet ready to use in any motorsport discipline. The radically designed carbon fiber shell is lightweight yet extremely strong, engineered to withstand the most rigorous of accidents. A center visor locking mechanism ensures a positive and safe visor closure, while the chin ventilating system provides maximum air flow through the helmet ensuring the visor stays clear. The Sparco Prime RF-10 8860 Supercarbon helmets ventilation is provided by air intakes situated on the front of the race helmet that gives maximum air flow through the helmet ensuring the visor stays clear. The top ventilation acts as an exhaust to remove excess heat and condensation. The interior lining of the helmet is also removable which allows it to be washed very easily. FIA 8860-2018 and Snell SA2020 approved. Please note: Sparco Prime RF-10 8860 Supercarbon helmet is supplied with a clear visor. Pictured with an optional dark smoke visor. Sparco Prime RF-10 8860 Supercarbon Helmet Frequently Asked Questions (FAQ): Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Consult the professionals at Competition Motorsport any time you have specific questions about your racing helmet. Why do I need a racing helmet? Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports. How do I choose the right size Sparco Prime RF-10 Supercarbon? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Competition Motorsport. What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use. What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head. Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection. How often should I replace my Sparco Prime RF-10 Carbon Fiber auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately. Are expensive racing helmets safer than budget ones? In a word, yes. Safety standards dictate the minimum requirements a helmet must meet, so even budget-friendly helmets offer some protection. More expensive helmets typically exceed minimum standards and have much more R&D and engineering behind their design. They are usually lighter weight, constructed of superior materials, fitment is more customizable, and often come with additional features. How do I maintain and clean my Sparco Prime RF-10 Carbon Fiber racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Matte Helmet Care Kit. Do I need to wear a balaclava under my Sparco Prime RF-10 Carbon Fiber racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Competition Motorsport recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection. Is the SNELL SA rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance. Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards. Can I wear glasses with my Sparco Prime RF-10 Carbon Fiber helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses. Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most. Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards. Can I buy replacement parts for my Sparco Prime RF-10 Carbon Fiber helmet, like visors or padding? Competition Motorsport carries Sparco helmet replacement parts, including visors and padding, to extend your helmet's lifespan. How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races. What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion. How do I store my Sparco Prime RF-10 Carbon Fiber helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Competition Motorsport Evo Helmet Bag Where can I buy a certified racing helmet? You should only buy from a professional, authorized dealer who has sold thousands of helmets. You can find all the best brands at Competition Motorsport online or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support. Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track. We take immense pride in offering a wide selection of Sparco auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Sparco has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world. Key Features of Sparco Racing Helmets: Unparalleled Safety: Sparco racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions. Premium Materials: Crafted with precision, Sparco helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection. Comfort and Fit: Sparco's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit. Aerodynamic Design: Sparco helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track. Frequently Asked Questions About Sparco Helmets: Where are Sparco helmets made? Sparco helmets are proudly manufactured in Italy, maintaining the highest quality standards. Is Sparco a good helmet brand? Yes, Sparco is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Sparco helmets Snell approved? Yes, many Sparco helmets are Snell approved, meeting rigorous safety standards. Are Sparco helmets FIA approved? Absolutely, several Sparco helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Sparco helmets run small? Sparco offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Sparco auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Sparco Racing Helmets: Sparco Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Sparco Racing Helmet to suit your racing needs. Sparco Racing Helmet: Each Sparco Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Sparco Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Sparco Race Helmets: Sparco Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Sparco has race helmets tailored for your specific discipline. Sparco Race Helmet: Your Sparco Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Sparco Race Helmet helps reduce wind resistance, giving you a competitive edge. Sparco Helmet: A Sparco Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Sparco Helmets: Sparco Helmets have a rich history of innovation and excellence. The extensive range of Sparco Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Sparco Carbon Fiber Helmet: Sparco Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Sparco's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Sparco Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Sparco Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Sparco Racing: Sparco Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Sparco Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Auto Racing Helmets: Auto racing helmets from Sparco are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

Bell Helmets HP6 8860-2018 RD-4C/EC Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronic Ear Cup Speakers Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C/EC 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Schuberth SF4 8860-2018 Carbon Fiber Helmet (non-ABP) BRAND NEW 8860-2018 HELMETHighest standards available complying with the latest FIA specifications. Every SCHUBERTH helmet is produced in their own factory in Italy, by the same hands that produce the masterpiece SF3 FIA 8860 helmets used by Champion F1 driver Max Verstappen and others.  The new leader with smallest outer shell size and lightest weight FIA 8860-2018 non-ABP helmet on the market with unparalleled adjustability and comfort.TOP LEVELDeveloped for a perfect fitting and comfort, ideal for long run with Prototype and GT cars or on single seater open cockpit where ABP homologation is not requested.CUSTOMIZATIONWith a wide range of accessories, SF4 can adapt to every need for comfort, aerodynamics and aesthetics.COMMUNICATION SYSTEM READYCable channels in the cheek pads are provided for easy installation of radio communications. A full selection of plug&play integrated electronics are available as an option.CARBONThe SF4 uses exclusive, autoclave cured, carbon fiber shells masterfully handcrafted to provide a unique helmet combining light weight, solid construction and superior safety in the iconic SCHUBERTH design.3 MM THICK VISOR 3D INJECTEDInjected visor directly derived from F1 expertise. Twelve different visors available from transparent to dark with several mirroring and multi-layer mirroring coating options. All standard visors are Pinlock® 120 lens equipped for optimum fog resistant performance. Tear-off buttons are also installed.  VISOR LOCK SYSTEMTwo-stage visor lock ensures the visor always closes symmetrically and therefore securely. Stage One lets in a small amount of air while the visor is still securely locked. Stage Two creates a firm visor seal that will keep out fine dust or water.  OPTIONAL ZYLON STRIPOptional Zylon Visor Strip adds important reinforcement to the top portion of the visor. This strip is currently only required for IndyCar within the USA, and is not required for most other major series. This accessory can also be used by drivers looking to add additional protection in open cockpit applications. This Zylon strip does not make the helmet ABP certified and does not replace the functionality of an ABP helmet.Please Note: Noise Reduction Earcup Speakers or Noise Reduction Earcups are not permitted for use in official FIA sanctioned events. Schuberth SF4 Carbon Fiber Helmet Available Accessories Schuberth SF4 Top Air Available Here Schuberth SF4 Individual Vent Scoops Available Here Schuberth SF4 Visors Available here Schuberth SF4 Scoops Available Here Schuberth SF4 Carbon Fiber Helmet Weight  Small Shell: XS\54 - S\55 - M\57 - L\58-59, 2.78 lb +/- 1.05 oz Large shell L+\60-61 - XL\61+, 2.99 lb +/- 1.05 oz