FIA 8860-2018 Carbon Helmets

Stilo ST5 GT ZERO 8860-2018 Carbon Helmet FIA 8860 Certification valid to 2033 for these ST5 GT Zero Carbon Fiber Helmets   An Auto Racing Helmet With Zero Compromises The Stilo Helmets ST5 GT ZERO 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo Helmets ST5 GT ZERO 8860-2018 carbon helmet is the lightest-weight carbon fiber racing helmet on the market (weight listed below). It has two integrated side ports each of which can accommodate electronics, forced air, helmet eject system, or a hydration system. This innovative design incorporates mounting and routing for these options into the helmet shell, so integration is sleek and seamless. When not in use, you don't even know the side ports are there. For the "Naked" version of this helmet (without side ports), please see the Stilo Helmets ST5 N ZERO 8860-2018 Carbon Fiber Helmet. Increased Visibility is Increased Safety The Stilo ST5 GT Zero 8860-2018 carbon fiber helmet has a taller, lower eyeport giving you better visibility without compromising your safety. Each visor has a center pinch-clip so opening and closing are easy even while wearing Nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5 GT ZERO Carbon Details FIA 8860-2018 certified Small Shell Weight: 2.5 lbs (1130g) up to size L (59) with intercom Large Shell Weight: 2.7 lbs (1230g) up to size 3XL (64) with intercom All Stilo ST5 shields can be used with this helmet Includes standard HANS post anchors Includes Stilo Helmet Bag Plus HANS for your helmet and HNR Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous helmets Stilo ZERO shells are the lightest FIA 8860-2018 helmets available This helmet will ship to you with signature required for delivery.

Stilo Helmets ST5 FN ZERO 8860-2018 Carbon Helmet FIA 8860 Certification valid thru 2032 for these ST5 FN Zero Carbon Fiber Helmets The Stilo Naked Helmet With Zero Compromises The Stilo Helmets ST5 FN Zero 8860-2018 carbon helmet was designed for professional auto racers needing to satisfy the strict FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo ST5 FN Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to the innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless with nothing protruding from the helmet, hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Increased Visibility Is Increased Safety Looking for increased visibility? The Stilo ST5 FN Zero 8860-2018 has a taller, lower eye port giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5 FN ZERO Carbon Helmet Details: FIA 8860-2018 certified Small Shell Weight: 2.5 lbs (1130g) to size L(59) w/comms Large Shell Weight: 2.7 lbs (1230g) to size 3XL (64) w/comms Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL Stilo ST5 shields are interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Redesigned cheek pads are more contoured and comfortable than previous designs Stilo ZERO shells are the lightest FIA 8860-2018 helmets available For the GT version of this helmet (with integrated side ports), please see the Stilo ST5 GT ZERO 8860-2018 Carbon Fiber Helmet. This helmet will require a signature for delivery.

Stilo ST6 GT Carbon Fiber 8860-2018 Racing Helmet The Legendary Stilo Carbon Helmet - Forever Ahead For over 25 years Stilo has lead the way in racing helmet innovation, and the new ST6 line marks a bold new chapter.  With input  from Porsche and F1 teams, Stilo developed enhanced front and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets.  Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at ever level of auto racing.  The ST6 carbon fiber helmet is one of the lightest helmets on the market.  Featuring enhanced airflow, visibility, and comfort while maintaining market-leading safety standards.  Developed with input from the Aston martin F1 team, every feature of the ST6 including the track-tested aerodynamics and a cutting edge dual lock visor system, its designed to give racers a performance edge. The Brand New Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way including; 10% Lighter than Stilo ST5 26% More Airflow than Stilo ST5 11% More Visibility More Comfortable Liner and Cheek pads More Shell Sizes for Lower Weight Better Visor Construction for Durability and Ease of Care Higher Quality Visor Hardware for Increased Reliability Stilo ST6 GT 8860 Carbon Fiber Auto Racing Helmet Features Puro Tech - Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers or additional coatings, minimizing the weight of your new helmet.  With the Puro process, Stilo delivers the lightest and safest helmet on the market.   New Shell Size Options - Now offered in three shell sizes, the Stilo ST6 auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape. STILO GT6 GT HELMET PAD CUSTOMIZATION CHART Increased Airflow Design - by utilizing our key partnerships with Formula One teams we have redesigned our front ventilation to increase airflow while maximizing safety.  The new Stilo ST6 also comes standard with ventilation holes in the top channeling airflow through the EPS foam to reduce sweat and moisture to keep you performing at your best.   Increased Downward Visibility - with input from professional drivers around the globe, Stilo has increased the downward Field of view of the Stilo ST6 carbon fiber helmet creating a wider field of vision for greater awareness on the track.   Interior Comfort - New and improved, the Stilo ST6 carbon fiber helmet cheek padding is redesigned to enhance stability and increase comfort.   Injection Molded Visor - brand new high performance visors provide exceptional vision and are coated in a new high performance washable anti-fog treatment. Dual Visor Lock -  pioneering the industry, this dual visor lock complies with FIA standards both in fully closed and ventilation positions.   Updated Visor Hardware - designed for easy installation and smoother activation, this visor hardware can be purchased in a variety of anodized finishes. Stilo ST6 GT 8860-2018 Carbon Fiber Auto Racing Helmet Sizing Note We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST6 GT 8860-2018 Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AG1R  Homologation: FIA 8860-2018 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2020 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Measuring Your Head For Your New Stilo ST6 GT 8860-2018 Carbon Fiber Helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Stilo ST6 FN Carbon Fiber 8860-2018 Racing Helmet The Legendary Stilo Carbon Helmet - Forever Ahead For over 25 years Stilo has lead the way in racing helmet innovation, and the new ST6 line marks a bold new chapter.  With input  from Porsche and F1 teams, Stilo developed enhanced front and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets.  Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at ever level of auto racing.  The ST6 carbon fiber helmet is one of the lightest helmets on the market.  Featuring enhanced airflow, visibility, and comfort while maintaining market-leading safety standards.  Developed with input from the Aston martin F1 team, every feature of the ST6 including the track-tested aerodynamics and a cutting edge dual lock visor system, its designed to give racers a performance edge. The Brand New Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way including; 10% Lighter than Stilo ST5 26% More Airflow than Stilo ST5 11% More Visibility More Comfortable Liner and Cheek pads More Shell Sizes for Lower Weight Better Visor Construction for Durability and Ease of Care Higher Quality Visor Hardware for Increased Reliability Stilo ST6 FN 8860 Carbon Fiber Auto Racing Helmet Features Puro Tech - Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers or additional coatings, minimizing the weight of your new helmet.  With the Puro process, Stilo delivers the lightest and safest helmet on the market. New Shell Size Options - ST6 FN Now offered in four shell sizes, the Stilo ST6 FN auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape.   Increased Airflow Design - by utilizing our key partnerships with Formula One teams we have redesigned our front ventilation to increase airflow while maximizing safety.  The new Stilo ST6 also comes standard with ventilation holes in the top channeling airflow through the EPS foam to reduce sweat and moisture to keep you performing at your best.   Increased Downward Visibility - with input from professional drivers around the globe, Stilo has increased the downward Field of view of the Stilo ST6 carbon fiber helmet creating a wider field of vision for greater awareness on the track.   Interior Comfort - New and improved, the Stilo ST6 carbon fiber helmet cheek padding is redesigned to enhance stability and increase comfort.   Injection Molded Visor - brand new high performance visors provide exceptional vision and are coated in a new high performance washable anti-fog treatment. Dual Visor Lock -  pioneering the industry, this dual visor lock complies with FIA standards both in fully closed and ventilation positions.   Updated Visor Hardware - designed for easy installation and smoother activation, this visor hardware can be purchased in a variety of anodized finishes. Stilo ST6 FN 8860-2018 Carbon Fiber Auto Racing Helmet Sizing Note We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST6 FN 8860-2018 Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AG1R  Homologation: FIA 8860-2018 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2020 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Measuring Your Head For Your New Stilo ST6 FN 8860-2018 Carbon Fiber Helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Prime RF-10 Supercarbon The Supercar of Helmets Hey, race track royalty! Ever feel like your current helmet is more of a tortoise than a hare? Time to trade that old noggin-protector in for something more... speedy. Introducing the Sparco Prime RF-10 8860 Supercarbon Helmet - the crown jewel of racing gear. Imagine the union of sheer beauty and beastly strength - that's the Sparco Supercarbon for you. This carbon-fiber-crafted beauty isn't just for show‚ its certified to the highest FIA standards. That means, whether you're pulling G's on the track or casually setting lap records, this bad boy is ready to rumble. Speaking of rumble, ever had your visor fog up during an intense lap? Annoying, right? The RF-10's got you covered with a crystal-clear view, thanks to its brilliant chin ventilation system. Plus, the center visor locking mechanism is like Fort Knox for your face‚ secure and safe. Thirsty mid-race? No worries! It's prepped to accommodate a drinks system. Yeah, you heard right. It's like a mini fridge, but for your head. This helmet isn't just about the outside though. Inside, it's plush and comfortable. After a sweaty race, you can pop out that interior lining and give it a wash. Talk about staying fresh! Sparco Prime RF-10 Supercarbon Product Highlights: Strong visor game: comes with a clear visor. Looking for that mysterious racer vibe? Opt for the dark smoke visor (sold separately).The visor (FIA approved) can also be infinitely adjusted. Approved and certified: FIA 8860-2018 & Snell SA2020 approved. Wash and wear: Removable interior lining, because who doesn't love freshness? Stay hydrated: accommodates an optional drink system. Head and neck safety: comes with factory fitted FHR posts. Racers, it's time to upgrade. Because while they say it's not about the gear but the driver, a bit of Sparco Supercarbon magic doesn't hurt either. So, ready to be the envy of the track? Hit that 'Add to cart' button and let the Sparco Prime RF-10 8860 Supercarbon helmet take you to the finish line in style and safety! The Sparco Prime RF-10 8860 Supercarbon helmet is homologated to the latest and highest FIA standard currently available making this helmet ready to use in any motorsport discipline. The radically designed carbon fiber shell is lightweight yet extremely strong, engineered to withstand the most rigorous of accidents. A center visor locking mechanism ensures a positive and safe visor closure, while the chin ventilating system provides maximum air flow through the helmet ensuring the visor stays clear. The Sparco Prime RF-10 8860 Supercarbon helmets ventilation is provided by air intakes situated on the front of the race helmet that gives maximum air flow through the helmet ensuring the visor stays clear. The top ventilation acts as an exhaust to remove excess heat and condensation. The interior lining of the helmet is also removable which allows it to be washed very easily. FIA 8860-2018 and Snell SA2020 approved. Please note: Sparco Prime RF-10 8860 Supercarbon helmet is supplied with a clear visor. Pictured with an optional dark smoke visor. Sparco Prime RF-10 8860 Supercarbon Helmet Size Chart Sparco Prime RF-10 8860 Supercarbon Helmet Frequently Asked Questions (FAQ): Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Consult the professionals at Competition Motorsport any time you have specific questions about your racing helmet. Why do I need a racing helmet? Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports. How do I choose the right size Sparco Prime RF-10 Supercarbon? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Competition Motorsport. What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use. What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head. Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection. How often should I replace my Sparco Prime RF-10 Carbon Fiber auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately. Are expensive racing helmets safer than budget ones? In a word, yes. Safety standards dictate the minimum requirements a helmet must meet, so even budget-friendly helmets offer some protection. More expensive helmets typically exceed minimum standards and have much more R&D and engineering behind their design. They are usually lighter weight,constructed of superior materials, fitment is more customizable, and often come with additional features. How do I maintain and clean my Sparco Prime RF-10 Carbon Fiber racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Matte Helmet Care Kit. Do I need to wear a balaclava under my Sparco Prime RF-10 Carbon Fiber racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Competition Motorsport recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection. Is the SNELL SA rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance. Is the FIA helmet certification important? Yes, FIA (F√©d√©ration Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards. Can I wear glasses with my Sparco Prime RF-10 Carbon Fiber helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses. Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most. Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards. Can I buy replacement parts for my Sparco Prime RF-10 Carbon Fiber helmet, like visors or padding? Competition Motorsport carries Sparco helmet replacement parts, including visors and padding, to extend your helmet's lifespan. How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races. What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion. How do I store my Sparco Prime RF-10 Carbon Fiber helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Competition Motorsport Evo Helmet Bag Where can I buy a certified racing helmet? You should only buy from a professional, authorized dealer who has sold thousands of helmets. You can find all the best brands at Competition Motorsport online or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support. Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track. We take immense pride in offering a wide selection of Sparco auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Sparco has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world. Key Features of Sparco Racing Helmets: Unparalleled Safety: Sparco racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions. Premium Materials: Crafted with precision, Sparco helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection. Comfort and Fit: Sparco's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit. Aerodynamic Design: Sparco helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track. Frequently Asked Questions About Sparco Helmets: Where are Sparco helmets made? Sparco helmets are proudly manufactured in Italy, maintaining the highest quality standards. Is Sparco a good helmet brand? Yes, Sparco is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Sparco helmets Snell approved? Yes, many Sparco helmets are Snell approved, meeting rigorous safety standards. Are Sparco helmets FIA approved? Absolutely, several Sparco helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Sparco helmets run small? Sparco offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Sparco auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Sparco Racing Helmets: Sparco Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Sparco Racing Helmet to suit your racing needs. Sparco Racing Helmet: Each Sparco Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Sparco Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Sparco Race Helmets: Sparco Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Sparco has race helmets tailored for your specific discipline. Sparco Race Helmet: Your Sparco Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Sparco Race Helmet helps reduce wind resistance, giving you a competitive edge. Sparco Helmet: A Sparco Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Sparco Helmets provide during intense racing conditions. Sparco Helmets: Sparco Helmets have a rich history of innovation and excellence. The extensive range of Sparco Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Sparco Carbon Fiber Helmet: Sparco Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Sparco's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Sparco Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Sparco Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Sparco Racing: Sparco Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Sparco Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Auto Racing Helmets: Auto racing helmets from Sparco are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

Stilo Helmets ST5 FN 8860-2018 ABP FIA 8860 Certification valid thru 2033 for these ST5 FN 8860 ABP Helmets The Stilo Helmets ST5 FN 8860-2018 ABP carbon fiber helmet was designed for professional racers needing to satisfy the latest FIA 8860-2018 ABP regulation. It's also the helmet of choice for drivers who won‚Äôt compromise their safety, no matter where they're racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. ABP is an acronym for "Advanced Ballistic Protection". The ABP replaces the zylon panel required by FIA in the previous generation (FIA 8860-2010) helmets, integrating stronger protection into the front of the helmet shell. A brand new testing procedure was introduced to evaluate this area, based on military ballistic specifications with a projectile shot at 250 km/h. The Stilo ST5 FN ABP was the first helmet to be certified to this new standard, offering a higher safety degree while maintaining dimensions and weight. The Stilo ST5 FN 8860-2018 ABP is among the lightest carbon fiber racing helmets on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, it can still be outfitted with electronics, top forced air, and a helmet eject system. Thanks to an innovative design incorporating mounting and routing for these options, integration is sleek and seamless with nothing protruding, hanging down, or otherwise getting in the way. When not in use, you don't even know they're there. Looking for increased visibility? The Stilo Helmets ST5 FN ZERO 8860-2018 has a taller and lower-placed eyeport, giving you better visibility while not compromising your safety. Every Stilo visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Stilo Helmets ST5 FN 8860-2018 ABP Note on Sizing We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo Helmets ST5 FN 8860-2018 ABP Details: FIA 8860-2018 ABP certification Includes Stilo HANS posts Competition Motorsport Stilo Owner's Kit sold separately. Significantly lighter than previous Stilo helmets Sizing from XS through 3XL Stilo ST5 shields are interchangeable across all ST5 helmets Eight top ventilation holes (can be used with the Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Made from 100% medium-tensile carbon Weight (+/-30 g): Small shell 1200g (2.6 lbs) Large shell 1320g (2.9 lbs) This helmet will ship with signature required for delivery.

Bell Helmets HP6 8860-2018 RD-4C/EC Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronic Ear Cup Speakers Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C/EC 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 RD-4C Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronics for ear buds (ear buds not included) Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C 8860-2018 Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Stilo ST6 FN ABP Carbon Fiber 8859-2024 / SA2025 Racing Helmet Advanced ABP protection with Snell SA2025 performance For over 25 years Stilo has led helmet innovation, and the ST6 FN ABP marks a new benchmark. With development input from top programs, the ST6 refines front and top aero for stability, broadens airflow, and expands visibility so you can focus on driving. Built from carbon fiber for a light, rigid shell, the ST6 FN ABP blends comfort and cooling with modern safety. From the dual-lock visor system to the revised eyeport and venting, every detail is aimed at confidence and consistency on track. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility More comfortable liner and cheek pads More shell sizes for lower weight Improved visor construction for durability and ease of care Higher quality visor hardware for increased reliability Stilo ST6 FN ABP 8859-2024 Carbon Fiber Auto Racing Helmet Features Puro Tech, Stilo's carbon fiber manufacturing approach minimizes extra coatings to reduce mass while maintaining protection. New shell size options: Stilo ZERO and ABP helmets are now offered in four shell sizes to deliver the smallest, lightest shell appropriate for your head. Increased airflow design: redesigned front intake and new top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider eyeport speeds up belt fastening and improves situational awareness. Interior comfort: reshaped cheek pads stabilize fit and comfort at speed. Injection-molded visor: improved optical clarity with a washable high-performance anti-fog treatment. Dual visor lock ‚Äì compliant with FIA standards in both closed and vented positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo ST6 FN ABP Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AF1WY Homologation: FIA 8859-2024 ABP Certification: Snell SA2025 Compatible shields: Stilo ST6 ABP helmet shields Open-ear FN design for maximum awareness and cooling Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2025 Carbon Fiber Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8860 Carbon Fiber ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 FN ABP 8859-2024 Sizing Note Customers who typically wear a size 59 in other brands are often most comfortable in a Stilo size 60, which uses the large shell. How to Measure for Your Stilo ST6 FN ABP Helmet Use a dressmaker‚Äôs tape or string to measure around your head about one inch above your eyebrows and around the largest point at the back. Take multiple measurements and use the largest. Proper fit is critical for comfort and safety. What's Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020‚Äînot a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 FN ABP 8859-2024 / SA2025 Helmet FAQs: Is this helmet Snell SA2025 certified? Yes, this helmet has both SA2025 certification and FIA 8859-2024 ABP homologation. What does ABP mean? ABP indicates additional frontal protection meeting the FIA's Advanced Ballistic Protection requirement. What's the difference between Stilo's FN and GT helmets?  The ST6 GT is designed for closed-cockpit cars (and is often marketed for that “GT” style car environment). It features molded-in side ports for forced air, comms, and/or hydration kits integrated into the helmet shell itself. The ST6 FN is optimized for open-cockpit, formula / sprint / open-wheel style cars. It has an aerodynamic advantage because it does not feature the side ports present on the GT model. Can I use ST5 shields on the ST6? No. The ST6 uses its own shield family; choose ST6-specific shields and hardware. This helmet will ship with signature required for delivery.

Bell Helmets HP6 8860-2018 Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key