Fire Extinguishers

The Perfect Affordable Extinguisher For HPDE Cars Ground Shipping Only. Pressurized bottles cannot be shipped via air. For HPDE participants, there simply is no better affordable fire extinguisher to protect your valuable sports car if things go sideways at the racetrack.  AFFF (Aqueous Film Forming Foam) fire extinguishers are suitable for use on Class A (wood, paper, material & cloth) & Class B (flammable liquids: gasoline, spirits, diesel, etc.) fires. This dual Class A & B rating makes the Lifeline Foam (AFFF) Fire Extinguishers far superior for use in your HPDE car and trailer vs. the typical big-box store extinguisher. Lifeline AFFF Hand Held Extinguisher Details Comes complete with a mounting bracket and two quick-release straps for easy access Sturdy mounting bracket strong steel clamps keeps your extinguisher secure even in harsh, vibration-prone environments. Extinguishers are refillable and should be serviced every two years Bottle capacity: 1.75 liters or 2.40 liters Bottle diameter: 4.25 in. (108 mm) Not approved or intended for use as motorsports-sanctioned fire suppression systems

Lifeline Zero 360 FK 5-1-12 Hand Held The Zero 360 FK 5-1-12 Hand Held Fire Extinguisher is the latest generation of Lifeline motorsport extinguishers, utilizing the advanced Zero FK suppressant (the direct replacement for Novec 1230). Engineered specifically for the demands of racing, this compact hand held extinguisher is perfect for use in the paddock, pits, or even for tackling small fires on your car—or a fellow racer's—while on track or off-road. Lightweight. Effective. Motorsport Ready. While this hand held extinguisher is an essential safety tool, Lifeline recommends it as a supplemental measure alongside a fully plumbed-in fire suppression system. In-vehicle fire systems provide wider coverage and superior performance when every second counts during an emergency exit. Features: • Uses Zero FK suppressant, replacing Novec 1230 for cleaner and safer fire suppression• Designed for motorsport use: paddock, pit lane, and on-track emergencies• Compact and lightweight construction with motorsport-grade durability• Supplied with one mounting bracket and two quick-release straps (unless noted otherwise)• Ideal for use in conjunction with a plumbed-in fire suppression system Specifications: 3 lbs: 14" x 3.25" / 356x83 mm – 4.8 lbs (2.2 kg) total 5 lbs: 14.75" x 4.25" / 375x108 mm – 7.5 lbs (3.4 kg) total 2.0 kg: 14.75" x 4.25" / 375x108 mm - 6.9 lbs (3.1 kg) total 3.0 kg: 19" x 4.25" / 484x108 mm - 9.4 lbs (4.3 kg) total Zero 360 FK 5-1-12 Hand Held FAQs What is Zero FK suppressant? Zero FK is Lifeline’s advanced fire suppressant that replaces Novec 1230, offering effective fire control while being environmentally responsible. Can this extinguisher be used as the sole fire system in a race car? No. Lifeline recommends pairing this hand held with a plumbed-in fire suppression system for maximum safety and in-car fire protection. Where can this extinguisher be used? It’s designed for motorsport environments, making it ideal for paddocks, pit lanes, trackside, or emergency use during on-track incidents. Equip your racing program with the proven safety of the Zero 360 FK 5-1-12 Hand Held Fire Extinguisher. 

Brey-Krause "Quick Release" Fire Extinguisher Mount The Brey-Krause “Quick Release” Fire Extinguisher Mount is more than just a safety component—it’s a precision-engineered work of art. CNC machined from high-grade T6 6061 billet aluminum and finished with a clear anodized coating, this mount combines durability, strength, and lightweight performance in a sleek package. Designed for motorsport and high-performance applications, it allows the extinguisher to be released with one hand when seconds count. Precision Engineering Meets Practical Safety This mount is compatible with all existing fire extinguisher brackets and comes complete with stainless steel hardware for installation. Its low-profile, CNC-machined design offers a rock-solid hold while ensuring rapid release in an emergency. Whether on track or street, the Brey-Krause Quick Release Mount provides peace of mind backed by exceptional craftsmanship. Key Features & Benefits Crafted from T6 6061 billet aluminum for superior strength and lightweight performance. Clear anodized finish for corrosion resistance and long-term durability. Precision CNC machining for a flawless fit and high-end appearance. One-hand quick release mechanism ensures extinguisher access in seconds. Mounts with four bolts to existing brackets or directly to any surface. Weighs just 1 pound, adding minimal weight to your vehicle. Compatible with most 90mm extinguishers, including 0.9L SPA Technique (01-HH-90) and 1kg FEV (FESG1000RHH). Accessories Replacement/Additional Mounting Bracket: R-9520-BRK Fire extinguisher bottle (shown) is sold separately Why Choose Brey-Krause? Brey-Krause products are known for blending precision engineering with motorsport functionality. The Quick Release Fire Extinguisher Mount is no exception—lightweight, durable, and designed to keep your safety gear secure and instantly accessible when it matters most. Brey-Krause Fire Extinguisher Mount FAQs What size fire extinguisher does this mount fit?The Brey-Krause Quick Release Mount is designed for 90mm diameter bottles, including the 0.9L SPA Technique (part# 01-HH-90), 1kg FEV (part# FESG1000RHH), and similar-sized extinguishers. How does the quick release mechanism work?The mount uses a precision CNC-machined design that allows the fire extinguisher to be released instantly with one hand, ensuring fast response in an emergency. What material is the mount made from?The mount is CNC machined from T6 6061 billet aluminum and finished with a clear anodized coating for strength, durability, and corrosion resistance. Is installation difficult?No. The mount installs easily using four bolts and is compatible with all existing fire extinguisher brackets. Stainless steel hardware is included. Does Brey-Krause offer accessories for this mount?Yes. A replacement or additional mounting bracket (R-9520-BRK) is available as an accessory to expand mounting options.

OverRev Quick-Release Roll Cage Fire Bottle Mount – 90mm The OverRev Quick-Release Roll Cage Fire Bottle Mount provides fast access and secure mounting for your handheld fire extinguisher. Designed for 90mm bottles such as the Lifeline 1kg FK 5-1-12 (replacing Novec 1230), this precision-engineered mount attaches directly to your roll bar or cage, ensuring safety is always within reach. With a simple pull-handle design, the extinguisher can be released in seconds, giving you critical response time when it matters most. Secure, Lightweight, and Race-Ready Built from clear-anodized aluminum for durability and weight savings, the OverRev mount is designed to withstand the rigors of motorsport environments. Compatible with 1.5", 1.75", and 2.0" diameter roll bars and cages, it provides a universal fit across a wide range of racing and track day vehicles. The low-profile design keeps your extinguisher securely in place while allowing instant removal with a single motion. Key Features & Benefits Quick-release fire extinguisher mount for 90mm bottles (1kg size). Compatible with Lifeline 1kg FK 5-1-12 bottles and other 90mm diameter bottles. Clear-anodized aluminum finish for strength and lightweight performance. Fits 1.5", 1.75", and 2.0" roll bar and cage tubing. Quick-release pull handle allows extinguisher removal in seconds. Motorsport-ready design ensures safety and reliability in racing environments. Mount only – fire bottle sold separately. Why Choose the OverRev Quick-Release Mount? This roll cage fire bottle mount combines security and accessibility for handheld fire extinguishers in competitive racing or track-day use. Whether for compliance with motorsport regulations or simply peace of mind, the OverRev mount keeps your fire extinguisher firmly secured yet instantly deployable when needed. Lifeline OverRev Quick-Release Cage Bottle Mount FAQs What size fire bottle does this mount fit?This OverRev mount is designed specifically for 90mm diameter fire bottles, including the Lifeline 1kg FK 5-1-12 and similar-sized extinguishers. What roll cage sizes are compatible?The mount fits roll bar and cage tubing in 1.5", 1.75", and 2.0" diameters, making it versatile across a wide range of race car builds. Is the fire extinguisher included?No. This listing is for the mount only. Fire bottles such as the Lifeline 1kg FK 5-1-12 must be purchased separately. How does the quick-release work?The mount features a pull-handle design that lets you remove the extinguisher in seconds, ensuring immediate access during an emergency. What material is the mount made from?The OverRev mount is crafted from clear-anodized aluminum, offering both lightweight construction and durability under racing conditions.

SFI 17.3 Sprint Car Offset Brackets with Low-Profile Hardware The SFI 17.3 Sprint Car Offset Brackets with Low-Profile Hardware are designed specifically for 1.375" low-profile cage clamps, providing a secure and reliable mounting solution in tight cockpit spaces. Featuring an offset shoulder, these brackets are engineered to accommodate installation on the left diagonal bar below the seat—where clearance between the side panel and bar is limited. By eliminating interference from traditional squared-shoulder brackets, these mounts offer a clean, professional installation while meeting SFI 17.3 compliance requirements. Offset Design for Tight Installations These brackets solve common interference issues when mounting to the left-side diagonal bar in Sprint Cars. The offset shoulder design ensures clearance from the side panel, preventing hardware contact during use. Built with low-profile hardware, the system provides a strong, secure fit without compromising cockpit space. Key Features & Benefits Engineered for SFI 17.3 compliance in Sprint Car applications. 1.375" low-profile cage clamps with offset shoulder design. Ideal for mounting on the left diagonal bar below the seat. Offset shoulder eliminates interference with side panel contact. Low-profile hardware ensures a compact and secure fit. Durable construction for long-lasting use in high-demand racing conditions. Installation Notes The offset design provides excellent clearance but may present installation challenges due to angled alignment. Some users have reported difficulty fitting clamps on cars with thicker powder-coated bars. Lifeline recommends slightly opening the tube clamp or bolt hole to improve alignment and ensure proper installation. Lifeline Sprint Car Clamps FAQs What are these Sprint Car offset brackets designed for?These brackets are designed for Sprint Cars using 1.375" low-profile cage clamps. The offset shoulder allows installation on the left diagonal bar below the seat without interfering with the side panel. Are these brackets SFI certified?Yes. These brackets and hardware meet SFI 17.3 standards for motorsport safety, making them compliant for Sprint Car competition. What makes the offset design different?The offset shoulder design eliminates interference issues caused by traditional squared-shoulder clamps, ensuring clean clearance from side panels in tight cockpits. Are there any installation challenges?Some users have reported difficulty installing the offset version due to angled alignment, particularly on vehicles with thick powder-coated bars. Slightly opening the tube clamp or bolt hole typically resolves the issue. Where should these brackets be used?They are specifically designed for the left diagonal bar below the seat in Sprint Cars, where space is tight and traditional brackets may cause side panel interference.