981 Cayman S/Boxster S

Girodisc Porsche 718 GTS 4.0 / 981 Spyder Rear Rotors (with Spacers & Bolts) The Girodisc A2-049B Rear Rotor Kit delivers high-performance braking and improved cooling for Porsche 718 GTS 4.0 and 981 Spyder models. Designed as a direct replacement for the OE discs, this 2-piece floating rotor system includes caliper spacers and longer bolts for easy installation of the larger diameter rotors. The result is enhanced braking torque, reduced unsprung mass, and a significant upgrade in heat dissipation—all while maintaining factory balance and ABS function. Precision Engineering & Lightweight Performance Each rotor features a CNC-machined 6061-T6 aluminum hat mated to Girodisc’s proprietary cast iron ring, ensuring optimal strength and weight reduction. The 2-piece floating design reduces rotational inertia and improves handling response. The rotor’s curved vane internal design acts as a centrifugal pump, channeling air through the disc to maximize cooling efficiency during hard use on the street or track. Floating Mount System & Quiet Operation The Girodisc floating mount system uses 10 high-strength alloy steel drive pins manufactured in-house in the USA. These pins, cadmium-plated for corrosion resistance, connect the rotor ring to the aluminum hat via class 12.9 cap screws and hardened washers. Anti-noise spring washers allow thermal expansion while eliminating unwanted rattles—offering a race-proven floating design that’s quiet enough for everyday driving. Vehicle Fitment Porsche 718 GTS 4.0 Porsche 981 Spyder Includes spacers and longer bolts for installation Requires 991 Carrera S/4S/GTS rear pad shape for full pad sweep Direct bolt-on replacement, no modifications required Technical Specifications CMS Number: A2-049B Position: Rear Rotor Diameter: 350mm (includes spacers & bolts) Design: 2-piece floating assembly Material: Proprietary cast iron rotor ring with 6061-T6 aluminum hat Vane Design: Curved directional vanes for efficient air cooling Hardware: Cadmium-plated drive pins, class 12.9 cap screws, anti-noise washers Rebuildable: Yes — replace rotor rings and reuse hats Sold/Price: Per pair FAQs for Girodisc A2-049B Do these rotors require modifications? No. The kit includes caliper spacers and longer bolts, allowing for direct installation with OEM calipers. What brake pads should I use? Use the 991 Carrera S/4S/GTS rear pad shape for complete pad sweep across the larger rotor surface. Are these rotors quieter than typical floating designs? Yes. Girodisc’s anti-noise spring washers ensure smooth, silent operation during street and track use. Can the rings be replaced? Yes. These rotors are fully rebuildable with replacement rings available from Girodisc. Upgrade your Porsche 718 GTS 4.0 or 981 Spyder with Girodisc A2-049B Rear Rotors for reduced unsprung weight, improved cooling, and consistent braking performance lap after lap.

Girodisc Porsche Cayman Iron Conversion Rear Rotors Convert your PCCB-equipped Porsche Cayman or Boxster to a high-performance iron rotor system with Girodisc’s precision-engineered rear rotors. Designed as a direct replacement for OEM carbon-ceramic discs, these rotors deliver superior heat management, consistent pedal feel, and lower replacement costs without compromising braking balance or ABS function. Vehicle Fitment Porsche 987 Cayman S / Cayman R (PCCB-equipped)Porsche 987 Boxster S (PCCB-equipped)Direct replacement for factory carbon-ceramic rotorsBolts directly to OEM calipers—no modifications required High-Performance Design for Real-World Driving The Girodisc system replaces the stock PCCB units with a two-piece floating iron rotor designed for durability and serviceability. Each rotor assembly features a CNC-machined 6061-T6 aluminum hat mated to Girodisc’s proprietary cast-iron friction ring. The curved vane internal design functions as a centrifugal air pump, maintaining consistent cooling under high braking loads. This setup preserves factory brake bias and pedal response while offering a more robust and affordable long-term solution for track or street use. Features • Direct PCCB replacement – no modifications required• 6061-T6 aluminum hats machined and anodized in the USA• Proprietary cast-iron friction rings cast and finished in-house• Floating mount design with cadmium-plated steel drive pins• Anti-noise spring washers eliminate rattle while allowing thermal expansion• Curved internal vanes maximize airflow and heat dissipation• Maintains OEM brake bias and ABS calibration• Fully rebuildable – replace only friction rings when needed• Sold/priced per pair Girodisc A2-049 Rear Rotor FAQs: Will these work with OEM PCCB calipers? Yes. These rotors are specifically designed for Caymans and Boxsters originally equipped with PCCB systems and bolt directly to the factory calipers. Why convert from PCCB to iron? Iron rotors offer greater thermal capacity and reduced replacement cost while still providing strong, consistent performance on street or track. Do these affect brake bias or ABS? No. Girodisc designs each conversion to maintain factory braking balance and ABS function. Are they rebuildable? Yes. When worn, only the iron friction rings need to be replaced—saving cost and maintaining long-term reliability. Upgrade your Cayman or Boxster’s braking system with Girodisc iron conversion rotors—precision-built for performance, reliability, and control.

Pagid Racing Brake Pad Shape No. 4908 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brakes] 12 - 19 X Porsche 991 3.8 Carrera S [ceramic brakes] 12 - 19 X Porsche 991.2 3.0 Carrera [ceramic brakes] 16 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 16 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 16 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche Cayman S [981] [ceramic brakes] 13 - 25 X Porsche 718 Cayman [982C] [ceramic brakes] 16 - 25 X Porsche 718 Cayman S [982C] [ceramic brakes] 16 - 25 X Porsche 718 Cayman T [982C] [ceramic brakes] 19 - 25 X Porsche 718 Cayman GTS [982C] [ceramic brakes] 17 - 20 X Porsche 718 Cayman GTS 4.0 [982C] [ceramic brakes] 20 - 25 X Porsche 718 Boxster [982] [ceramic brakes] 16 - 25 X Porsche 718 Boxster S [982] [ceramic brakes] 16 - 25 X Porsche 718 Boxster T [982] [ceramic brakes] 19 - 25 X Porsche 718 Boxster GTS [982] [ceramic brakes] 17 - 20 X Porsche 718 Boxster GTS 4.0 [982] [ceramic brakes] 20 - 25 X Porsche 718 Spyder [982] [ceramic brakes] 19 - 25 X Porsche 718 Cayman T [982C] [ceramic brakes] 19 - 25 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

RT RE10*:RE10 is the ultimate endurance race compound offering a balance of excellent stopping power, low thermal conductivity, extremely low pad and disc wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms *Denotes a "race only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it is important to choose the desired compound for the correct environment the vehicle will be used in. Pad Compounds are run on a brake dynamometer over multiple brake applications (stops) to test the materials in a controlled environment for the most accurate data. Wear rates and temperatures can be influenced by car setup, grip levels, track layout/configuration and many other variables.

RT RE10*:RE10 is the ultimate endurance race compound offering a balance of excellent stopping power, low thermal conductivity, extremely low pad and disc wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms *Denotes a "race only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it is important to choose the desired compound for the correct environment the vehicle will be used in. Pad Compounds are run on a brake dynamometer over multiple brake applications (stops) to test the materials in a controlled environment for the most accurate data. Wear rates and temperatures can be influenced by car setup, grip levels, track layout/configuration and many other variables.

Cobalt Brake Pads Porsche D1389 Racing Brake Pads (Rear) - 18mm Cobalt D1389 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - X Porsche 718 Boxster S 2.5 [982] 16 - X Porsche Boxster 2.7 [981] 12 - X Porsche Boxster GTS 3.4 [981] 14 - X Porsche Boxster S 3.4 [981] 12 - X Porsche 718 Cayman 2.0 [982] 16 - X Porsche 718 Cayman S 2.5 [982] 16 - X Porsche Cayman 2.7 [981] 13 - X Porsche Cayman GTS 3.4 [981] 14 - X Porsche Cayman S 3.4 [981] 13 - X Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Pagid Racing Brake Pad Shape No. 8074 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 2012 - 16     X Porsche 991.2 3.0 Carrera [iron brakes] 2017 - 19     X Porsche 992 3.0 Carrera [iron brakes] 2020 +     X Porsche 997.2 3.6 Carrera & 3.6 Carrera 4 2009 - 12     X Porsche 718 Boxster 2.0 2017 +     X Porsche 718 Boxster S 2.5 2017 +     X Porsche 981 Boxster 2.7  2013 - 16     X Porsche 981 Boxster GTS 3.4 2014 - 16     X Porsche 981 Boxster S 3.4 2013 - 16     X Porsche 718 Cayman 2.0 2017 +     X Porsche 718 Cayman S 2.5 2017 +     X Porsche 981 Cayman 2.7 2013 - 16     X Porsche 981 Cayman GTS 3.4 2014 - 16     X Porsche 981 Cayman S 3.4 2013 - 16     X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Cobalt Brake Pads Porsche D1417 Racing Brake Pads (Rear) - 16mm Cobalt D1417 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

GiroDisc 1417 Rear Racing Brake Pads  GP30-1417.16 Brake Pads Designed to deliver race-level performance on the street, these pads blend aggressive stopping power with rotor preservation, making them an ideal choice for motorsport enthusiasts who demand reliability and precision. The GiroDisc GP30 Endurance Race Pads feature a premium compound optimized for the unique demands of automotive racing and spirited street driving. Their advanced formulation guarantees a firm, predictable bite that enhances braking confidence during high-speed track sessions or aggressive daily driving. These pads are designed to maintain their grip under intense conditions without excessive fade or rotor wear. GP35-1417.16 Brake Pads Our GP35 compound combines the best of both worlds into one all-around race pad. We took some of the longevity of our endurance pads, some of the bite of our sprint pads, and worked to develop a compound that can do it all. As a bonus, it’s easy to bed, which means less time figuring your brakes out, and more time driving on the track. The GP35 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. The torque curve is designed to be smooth and linear, which leads to superior modulation and release under trail braking. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. It has become our most popular compound and is the compound we recommend most frequently to track day drivers and shops running cars in professional racing series. GP40-1417.16 Brake Pads GP40 compound falls between a sprint and an endurance compound. It maintains good bite and pedal feel while being friendly to your rotors. They are a favorite among our track day customers and shares a lineage with compounds found on cars competing in legendary races like the 24 Hours of Le Mans. These pads have been race-tested and hold up to the brutal conditions on the track. GiroDisc 1417 FITMENT GUIDE: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X

GiroDisc 1389 Front Racing Brake Pads  A race pad for all occasions. Our GP35 compound combines the best of both worlds into one all-around race pad. We took some of the longevity of our endurance pads, some of the bite of our sprint pads, and worked to develop a compound that can do it all. As a bonus, it’s easy to bed, which means less time figuring your brakes out, and more time driving on the track. The GP35 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. The torque curve is designed to be smooth and linear, which leads to superior modulation and release under trail braking. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. It has become our most popular compound and is the compound we recommend most frequently to track day drivers and shops running cars in professional racing series. Note: this compound is only compatible with iron rotors. GiroDisc 1389 FITMENT GUIDE: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - 25 X Porsche 718 Boxster S 2.5 [982] 16 - 25 X Porsche Boxster 2.7 [981] 12 - 16 X Porsche Boxster GTS 3.4 [981] 14 - 16 X Porsche Boxster S 3.4 [981] 12 - 16 X Porsche 718 Cayman 2.0 [982] 17 - 25 X Porsche 718 Cayman S 2.5 [982] 17 - 25 X Porsche Cayman 2.7 [981] 13 - 16 X Porsche Cayman GTS 3.4 [981] 14 - 16 X Porsche Cayman S 3.4 [981] 13 - 16 X

PFC Brake Pads 1389.08.17.44 PFC 08 COMPOUND One of PFC's most popular compounds which came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' endurance materials, but with much higher bite and consistent performance across a broad temperature range. PFC 1389.08.17.44 Brake Pad Fitment: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - X Porsche 718 Boxster S 2.5 [982] 16 - X Porsche Boxster 2.7 [981] 12 - X Porsche Boxster GTS 3.4 [981] 14 - X Porsche Boxster S 3.4 [981] 12 - X Porsche 718 Cayman 2.0 [982] 16 - X Porsche 718 Cayman S 2.5 [982] 16 - X Porsche Cayman 2.7 [981] 13 - X Porsche Cayman GTS 3.4 [981] 14 - X Porsche Cayman S 3.4 [981] 13 - X

Performance Friction PFC Brake Pads 0738.XX.16.44 Race-Ready, High-Performance Brake Pads Performance Friction Corporation (PFC) Brake Pads 0738.XX.16.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 0738.XX.16.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 0738.XX.16.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC 0738.XX.16.44 Fits the Following Cars (Rear): Porsche 718 2 litre 2016- Boxster / S Porsche 718 2 litre 2016- Cayman / S Porsche 955 3.2 / 4.5 litre 2003- Cayenne Porsche 955 3.6 / 4.8 litre 2007- Cayenne Porsche 981 3.4 litre 2012- Boxster S / GTS Porsche 981c 3.4 litre 2010- Cayman R excl ceramic Porsche 981c 3.4 litre 2010- Cayman S / GTS Porsche 986   1996-04 Boxster / Cayman Porsche 986   1996-04 Boxster S / Cayman S Porsche 987 / 987.2 3.2 / 3.4 litre 2005-12 Boxster S / Cayman S Porsche 987 / 987c   2005-12 Boxster / Cayman Porsche 996 3.4 / 3.6 litre 1997-05 C Porsche 996 996-C2 996-C4 1998-04 C2 / C4 Porsche 997   2005-   Porsche 997 997-C2 997-C4 2004-11 C2 / C4

Race Technologies Front Brake Pad 2403.17 Fits the Following Cars: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 16 X Porsche 991.2 3.0 Carrera [iron brakes] 17 - 19  X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - X Porsche 718 Boxster S 2.5 [982] 16 - X Porsche Boxster 2.7 [981] 12 - X Porsche Boxster GTS 3.4 [981] 14 - X Porsche Boxster S 3.4 [981] 12 - X Porsche 718 Cayman 2.0 [982] 16 - X Porsche 718 Cayman S 2.5 [982] 16 - X Porsche Cayman 2.7 [981] 13 - X Porsche Cayman GTS 3.4 [981] 14 - X Porsche Cayman S 3.4 [981] 13 - X RE10 Compound Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. TS20 COMPOUND The Race Technologies TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum.  Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust. Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.

Pagid Racing Brake Pad Shape No. 2406 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 996 Carrera 3.4 & 3.6 1997 - 2005 X Porsche 718 Boxster 2.0  2016+ X Porsche 718 Boxster S 2.5 2016+ X Porsche 986 Boxster 1996 - 2005 X Porsche 987 Boxster 2005 - 12 X Porsche 981 Boxster 2.7 2012+ X Porsche 981 Boxster GTS 3.4 2014+ X Porsche 986 Boxster S 1999 - 2005 X Porsche 987 Boxster S 2005 - 12 X Porsche 981 Boxster S 3.4 2012+ X Porsche Cayenne Turbo [18" wheels] 2002 - 10 X Porsche 718 Cayman 2.0 2016+ X Porsche 718 Cayman S 2.5 2016+ X Porsche 987 Cayman 2009 - 12 X Porsche 981 Cayman 2.7 2013+ X Porsche 981 Cayman GTS 3.4 2014+ X Porsche 987 Cayman R (non-ceramic) 2010 - 12 X Porsche 987 Cayman S 2006 - 12 X Porsche 987 Cayman S 3.4 2013+ X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 44 Compound: The Pagid RS 44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Girodisc Brake Pad Spreader The Right Tool for the Job This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Built Like a Tank. Works Like a Charm. Insert the spreading plates one way for wider six-piston calipers, or turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. It will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.

Carbotech CT1389 Performance & Racing Front Brake Pads Cobalt CT1389 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [iron brakes] 12 - 19 X Porsche 991.2 3.0 Carrera [iron brakes] 15 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 - X Porsche 997 3.6 C & 3.6 C4 08 - 11 X Porsche 718 Boxster 2.0 [982] 16 - X Porsche 718 Boxster S 2.5 [982] 16 - X Porsche Boxster 2.7 [981] 12 - X Porsche Boxster GTS 3.4 [981] 14 - X Porsche Boxster S 3.4 [981] 12 - X Porsche 718 Cayman 2.0 [982] 16 - X Porsche 718 Cayman S 2.5 [982] 16 - X Porsche Cayman 2.7 [981] 13 - X Porsche Cayman GTS 3.4 [981] 14 - X Porsche Cayman S 3.4 [981] 13 - X   Precision braking starts here. The Carbotech CT1389 brake pads offer world-class stopping power across a range of compounds engineered for HPDE, club racing, time trials, and daily driving. Whether you're shaving tenths at a national event or building consistency during weekend track days, there's a Carbotech compound tailored to your performance goals. Manufactured in the USA using Carbotech’s proprietary ceramic and metallic formulations, these pads deliver unmatched modulation, rotor friendliness, and fade resistance. Friction materials have evolved significantly over the years. Brake pads were originally made with organic ingredients such as asbestos and carbon, held together by a strong resin. Most brake pads sold today are considered semi-metallic, semi-metallic brake pads use brass, copper, and steel wool shavings held together by a resin. Unfortunately, the main drawback about the use of steel strands, iron, graphite, and small amounts of filer and friction modifiers (used to provide strength and conduct heat away from the rotors) is that the metal shavings and iron must rub against steel rotors every time the brakes are applied. This generates more noise and is a lot more abrasive on the rotors. It also creates corrosive dust that can damage your braking system as well as the paint on your wheels and car. Friction materials that contain Ceramic Kevlar formulations have become recognized for their desirable blend of traits. This allows the Ceramic Kevlar pads to handle higher brake temperatures with less heat fade, and provide faster recovery after heavy braking. It also reduces brake dust and makes wheel maintenance easier! Ceramic Kevlar compounds extend brake life compared to most other semi-metallic and organic materials, and at the same time they outlast other premium pad materials by a significant margin, without compromising in noise control, pad life, and all around braking performance. The CT1389 shape fits a variety of high-performance applications, making it a go-to solution for drivers looking for track day brake pads that match their skill level and intensity. Carbotech CT1389 Brake Pad Highlights Multiple compounds available to match driving style and track conditions Fade-resistant ceramic-metallic formulations designed for extreme temperature stability Rotor-friendly design ensures longer disc life and reduced operating costs Made in the USA with race-proven quality and compound development Perfect for HPDE, time trials, autocross, club racing, and pro-level motorsports Available Compounds for the Carbotech CT1389 Brake pad 1521: street compound designed for spirited street driving. Low dust and quiet operation with high initial bite.  1521 friction coefficient rated at 0.47. AX6: Autocross-focused compound offering more initial bite than 1521. Great for Solo and light-duty track use where cold bite matters. AX6 friction coefficient rated at 0.50. RP2: Ideal for racers seeking durability and rotor life in endurance club racing. Very low wear rates and excellent release characteristics. RP2 friction coefficient rated at 0.50. XP8: Entry-level race compound perfect for advanced HPDE and club racing. Consistent torque and excellent modulation under high heat. XP8 friction coefficient is rated at 0.56. XP10: Mid-tier race pad with higher bite and fade resistance than XP8. Excellent for time trials, wheel-to-wheel racing, and aggressive HPDE. XP10 friction coefficient is rated at 0.60. XP12: Designed for heavier cars or high-speed tracks. High torque levels and consistent performance across wide temperature ranges. XP12 friction coefficient is rated at 0.65. XP20: Ultra-high torque and friction. For drivers who demand maximum stopping power in pro-level racing environments.  XP20 friction coefficient rated at 0.68. XP24: Highest friction compound in the Carbotech lineup. Built for pro racing applications requiring peak performance and extreme heat tolerance. XP24 friction coefficient rated at 0.70. Carbotech 1521 The Carbotech™ 1521™ is a high-performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a low dust and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for track use. Carbotech AX6 The AX6™ is specifically engineered for Autocross applications. A high-torque brake compound delivering reliable and consistent performance over a wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. NOT FOR STREET USE! Carbotech RP2 The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has a strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. NOT FOR STREET USE! Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is their first racing compound. It provides good initial bite at race temperatures, high coefficient of friction, excellent modulation, and release characteristics. XP8™ offers extremely high fade resistance and is very rotor friendly. It's perfect for track day use with any tire.  NOT FOR STREET USE! Carbotech XP10 When Carbotech™ unleashed the XP10™ it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly-praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. NOT FOR STREET USE! Carbotech XP12 Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has a temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™ but compared to the competition the XP12™ is still very rotor friendly. NOT FOR STREET USE! Carbotech XP20 XP20™ is the latest iteration of the highly successful XP™ series of compounds.  With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is a major step in a progression of the XP™ series of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful.  NOT FOR STREET USE! Carbotech XP24 XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with an open wheel, closed wheel, sprint, and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). NOT FOR STREET USE! Carbotech CT1471 Frequently Asked Questions (FAQ) 1. Which Carbotech compound is best for daily driving? 1521 is ideal for spirited street use with minimal dust and noise.. 2. What’s the best compound for beginner HPDE drivers? XP8 is a great starting point for advanced HPDE, offering strong bite and fade resistance without being overly aggressive. 3. Can I mix Carbotech compounds front and rear? Yes, many drivers use a more aggressive compound in the front (e.g., XP12) and a slightly less aggressive one in the rear (e.g., XP10) to fine-tune balance. 4. Are Carbotech pads hard on rotors? No. All Carbotech compounds are known for being rotor-friendly, helping reduce rotor wear and operating costs. 5. Which compound is best for endurance racing? RP2 is engineered specifically for long-distance events where pad and rotor life are just as important as torque output. 6. Do Carbotech pads require special bedding procedures? Yes. A proper bedding-in process is critical for optimal performance. Carbotech provides detailed bedding instructions with every set of pads. Carbotech Brake Pad Bedding Procedures The bedding process transfers friction material from the pads into the pores of the brake rotor. It also matches the microscopic contours of the pads and rotors to increase surface contact. Proper bedding of pads & rotors will result in greater performance, longer pad life & less rotor wear. Failure to properly bed in your pads could lead to friction materials chunking and breaking up. This could also lead to overheating your pads and causing them to glaze over resulting in the car not being able to stop or slow fast enough. All new brake pads require a bedding process. The proper way to bed your brake pads and brake discs (rotors) is to bed them on the racetrack, NOT on the street. Start this process by pumping your brakes a few times to assure proper installation. Once on track perform several moderate (medium) near stops (to a very slow rolling speed) to thoroughly warm up the pads and rotors. This should take 1-2 laps. This allows a thin layer of the pad material to be transferred into the micro-grooves of the rotor. After the pads/rotors are warm, perform a series of hard near stops (to a slow rolling speed) until some brake fade is felt. This process should take about 2-4 laps (depending on the track). Once this occurs, then stay off the brakes (as much as possible) and bring your car into the pits/paddock to completely cool. Do not lock the tires during this operation. Allow brake pads and/or rotors cool down to ambient temperatures; no less than 30 minutes. The total bedding procedure should not take more than 5-6 laps or about 10-15 minutes. Failure to properly bed in your pads could cause friction material to chunk and break up resulting in poor pad performance and pad life. Improper bedding can also lead to overheating your pads and causing them to glaze over, resulting in the car not being able to stop or slow properly.