A2-211 Girodisc Chevrolet Camaro SS, ZL1 Rear Rotors
$1,746.00
Girodisc Chevrolet Camaro SS, ZL1 Rear Rotors
Upgrade your Camaro’s stopping power with Girodisc’s lightweight two-piece rear rotors. Designed as a direct replacement for factory units, these precision-engineered rotors reduce unsprung weight while improving braking consistency and cooling performance for both street and track use.
Lightweight, Track-Proven Performance
Each Girodisc rotor is crafted from proprietary cast iron with a billet 6061-T6 aluminum hat, machined and assembled in the USA. The floating two-piece design allows the rotor to expand under heat without warping or distortion, maintaining consistent pad contact and pedal feel. The result is better modulation, reduced fade, and faster recovery lap after lap.
Features
• Direct replacement for factory rear rotors – no modifications required• Aircraft-grade 6061-T6 aluminum hats with durable anodized finish• Proprietary high-carbon cast iron discs made and machined in the USA• Floating mount system using cadmium-plated alloy steel drive pins• Curved directional vanes promote superior air flow and heat dissipation• Lighter than OEM rotors, improving suspension response and acceleration• Fully serviceable design – only replace iron rings when worn
Vehicle Fitment
Chevrolet Camaro SS (2016–present)Chevrolet Camaro ZL1 (2017–present)Fits models equipped with factory Brembo rear calipers.
Girodisc A2-211 Rear Rotor FAQs:
Do these Girodisc rotors fit both manual and automatic Camaro SS models? Yes, they fit all 2016+ Camaro SS and ZL1 models equipped with the factory Brembo brake system, regardless of transmission.
Will I need to upgrade my brake pads when installing these? It’s highly recommended to use a fresh set of pads compatible with iron rotors to ensure proper bedding and optimal braking performance.
How much lighter are Girodisc rotors compared to OEM units? Each rotor typically weighs 3–5 lbs less than the OEM cast iron equivalent, significantly reducing unsprung and rotational mass.
Are Girodisc rotors suitable for daily driving? Absolutely. Girodisc rotors deliver exceptional street manners while being durable enough for heavy track use.
Enhance your Camaro’s braking performance and shed unnecessary weight with Girodisc’s precision-engineered rear rotors. Order today and experience smoother, stronger stops on every drive.
A1-039 Girodisc Chevrolet Camaro SS (5th Gen) Front Rotors
$1,746.00
Chevrolet Camaro SS (5th Gen) Front Rotors
Unlock the full braking potential of your 5th Gen Camaro SS with Girodisc’s two-piece floating front rotors—crafted to deliver lighter weight, improved cooling, and uncompromised OEM fitment. Designed for drivers who demand better response and durability without altering brake bias or ABS operation, these rotors are the ultimate upgrade for street and track performance.
Race-Bred Engineering for Street Precision
Each Girodisc rotor is precision-machined in the USA from proprietary high-carbon cast iron and paired with a 6061-T6 aircraft-grade aluminum hat. The floating mount system with anti-noise spring washers allows the rotor to expand and contract with heat cycles, eliminating rattle and ensuring smooth operation. The curved vane internal design actively pumps air through the rotor, enhancing cooling efficiency under extreme braking loads.
Vehicle Fitment
• 2010–2015 Chevrolet Camaro SS (6.2L V8)• Compatible with factory Brembo front calipers
Girodisc A1-039 Features
• Direct bolt-on replacement for OEM rotors• Two-piece floating design reduces unsprung and rotational weight• U.S.-sourced 6061-T6 aluminum hats• Proprietary cast iron with curved internal vanes for maximum cooling• Floating drive pin system with anti-noise spring washers• Enhanced fade resistance and pedal feel• Sold/priced per pair
Camaro SS Front Rotor FAQs:
Are these compatible with factory Brembos? Yes, they are designed to work perfectly with the OEM Brembo calipers on the 5th Gen Camaro SS.
Will they improve braking performance? Definitely. Reduced unsprung weight and better cooling deliver faster response and reduced fade.
Can they handle track use? Yes, Girodisc rotors are track-proven and ideal for spirited driving or HPDE events.
Can I replace just the rings later? Yes, replacement rings are available—simply reuse your aluminum hats for a cost-effective refresh.
Take your Camaro SS braking to the next level with Girodisc’s proven two-piece rotor design—engineered for precision, endurance, and performance you can feel.
D2-211 Girodisc Chevrolet Camaro SS / ZL1 Rear Replacement Rotor Rings
$1,193.00
Girodisc D2-211 Chevrolet Camaro SS / ZL1 Rear Replacement Rotor Rings
The Girodisc D2-211 Rear Replacement Rotor Rings are precision-engineered replacements for Girodisc two-piece rear rotors fitted to the Chevrolet Camaro SS and ZL1. These high-performance iron rings are designed to restore your braking system’s cooling efficiency and stopping consistency under street or track conditions.
Engineered for High-Performance Camaro Applications
Manufactured in the USA, each Girodisc D2-211 ring is cast from Girodisc’s proprietary iron alloy for superior durability, temperature control, and friction stability. The curved vane design functions as a centrifugal air pump, efficiently directing cooling air through the disc to reduce fade during heavy braking. Supplied as a pair with all-new hardware, these rings mount directly to your existing Girodisc aluminum hats for a perfect fit.
Features
• Direct replacement for Girodisc Chevrolet Camaro SS / ZL1 rear rotors• Proprietary cast iron alloy poured and machined in the USA• Curved vane internal geometry for improved cooling• Includes complete hardware kit for installation• Reuses Girodisc aluminum hats• Optimized for strength, heat capacity, and weight balance• Sold/priced per pair• Not compatible with OEM or other aftermarket hats
Vehicle Fitment
• Chevrolet Camaro SS (All Years) – Rear• Chevrolet Camaro ZL1 (All Years) – Rear• Designed for Girodisc two-piece rotor systems• Will not fit OEM or non-Girodisc 2-piece rotors
Girodisc D2-211 Chevrolet Camaro SS / ZL1 Rear Replacement Rotor Rings FAQs
Can I reuse my existing Girodisc hats? Yes. These rings are designed to bolt directly to your Girodisc aluminum hats using the included hardware.
Are these compatible with OEM or factory rotors? No. Girodisc replacement rings only fit Girodisc two-piece systems and will not fit OEM or other aftermarket hats.
What’s included in the kit? Two iron rotor rings (left and right) and a complete hardware kit for easy installation.
Are these rotors directional? Yes. Each ring has directional curved vanes—ensure proper left/right installation for maximum airflow and cooling performance.
How do these perform compared to OEM rotors? Girodisc rotors run cooler, resist warping, and reduce unsprung weight, improving both braking consistency and suspension response.
Are they sold as a set? Yes. The Girodisc D2-211 Chevrolet Camaro SS / ZL1 Rear Replacement Rotor Rings are sold and priced per pair, complete with hardware.
Maintain top-tier braking performance and reliability with Girodisc D2-211 Rear Replacement Rotor Rings—crafted in the USA for your Chevrolet Camaro SS or ZL1 to deliver consistent, track-proven stopping power and long-term durability.
GD355.32.62 Girodisc 355x32mm Replacement Rotor Rings (Wide Annulus)
$1,120.00
Girodisc GD355.32.62 355x32mm Replacement Rotor Rings (Wide Annulus)
The Girodisc GD355.32.62 Replacement Rotor Rings (Wide Annulus) are precision-engineered to replace worn iron rings on Girodisc two-piece brake systems using the D62 hat configuration. These 355x32mm rings are crafted for performance vehicles utilizing Brembo big brake kits that require a wide annulus pad contact area.
Restore Performance with Genuine Girodisc Components
Manufactured in the USA from Girodisc’s proprietary cast iron alloy, these rings are engineered for maximum strength, heat resistance, and consistent friction. The wide annulus design provides a larger pad contact area for improved wear balance and braking stability. Each rotor features directional curved vanes that act as a centrifugal pump, pulling cool air through the disc to minimize fade and maintain optimal performance under track conditions.
Features
• Dimensions: 355mm x 32mm (D62 Wide Annulus)• Direct replacement rings for Girodisc two-piece D62 systems• Designed for use with wide annulus Brembo calipers and pads• Proprietary cast iron alloy poured and machined in the USA• Curved vane internal geometry for maximum cooling• Reuses Girodisc aluminum hats• Includes new hardware for installation• Sold/priced per pair
Vehicle Fitment
The Girodisc GD355.32.62 355x32mm Replacement Rotor Rings (Wide Annulus) fit Girodisc D62-based systems commonly used on:• Brembo 4-piston and 6-piston big brake kits (355mm applications)• Porsche Cayman / Boxster (Brembo GT 355mm systems)• Subaru WRX STI (Brembo GT wide annulus 355mm setup)• Mitsubishi Evo X with Brembo 355mm upgrade• BMW M2 / M3 / M4 with Brembo 355mm GT kitsAlways verify your hat bolt pattern and pad annulus match the D62 configuration before ordering.
Girodisc GD355.32.62 355x32mm Replacement Rotor Rings (Wide Annulus) FAQs
What does “wide annulus” mean? It refers to the pad contact area width on the rotor. Wide annulus rotors are designed for Brembo GT calipers using pads with a broader friction face.
Can I reuse my aluminum hats? Yes. These replacement rings are designed to bolt directly to Girodisc aluminum hats using the included hardware.
Do these include hardware? Yes. Each kit includes a complete set of new bolts, washers, and drive pins for proper installation.
Are the rings directional? Yes. Each rotor features left and right curved vane geometry for optimal cooling and airflow direction.
Do they fit OEM or other aftermarket hats? No. Girodisc replacement rings are specifically machined for Girodisc D62 aluminum hats and are not compatible with other brands.
Are they sold as a pair? Yes. The Girodisc GD355.32.62 355x32mm Replacement Rotor Rings (Wide Annulus) are sold and priced per pair and include a complete hardware kit.
Keep your braking system at peak performance with Girodisc GD355.32.62 355x32mm Replacement Rotor Rings (Wide Annulus)—the perfect OEM-quality solution for maintaining the precision, cooling, and durability your Girodisc system was designed for.
Pagid Racing 2487 Brake Pads (Front)
from $631.00
Pagid Racing Brake Pad Shape 2487
Fitment Guide Pagid 2487 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] Gen IX and X
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid Racing 2487 Brake Pad RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid Racing 2487 Brake Pad RSL 1 Compound
Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.
Pagid Racing 2487 Brake Pad RST 1 Compound
Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.
Pagid Racing 2487 Brake Pad RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Pagid Racing 2487 Brake Pad RST 4 Compound
RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.
Pagid Racing 1408 Brake Pads (Rear)
from $620.00
Pagid Racing Brake Pads 1408
Pagid Racing 1408 Brake Pads Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vanquish
03 - 08
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Cadillac
CTS-V (6 piston front caliper)
10 - 14
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro ZL1 [Gen 5]
12 - 15
X
Chevrolet
Camaro ZL1 and ZL1 1LE [Gen 6]
16 -
X
Dodge
Challenger HellCat & 392
15 -
X
Ferrari
360 all models
99 - 05
X
X
Ferrari
F430 [cast iron brakes]
05 - 10
X
X
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid Racing 1408 Brake Pad RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid Racing 1408 Brake Pad RSL 1 Compound
Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.
Pagid Racing 1408 Brake Pad RSC 1 Compound (Ceramic Rotors Only)
A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.
Pagid Racing 1408 Brake Pad RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Performance Friction PFC 7781 Brake Pads (Front)
$604.00
Performance Friction PFC Racing Brake Pad Shape 7781
Fitment Guide PFC 7781 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] Gen IX and X
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
Performance Friction Compound Performance Graph
Performance Friction Brake Compounds
The Performance Friction PFC 7781 racing brake pad features a specialized backing plate and friction surface designed for compatible high-performance brake calipers. With a 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and 15 mm friction material thickness, the PFC 7781 provides a precisely defined pad shape for demanding motorsport braking applications.
Available through Competition Motorsport, the PFC 7781 is designed for drivers and racing teams seeking Performance Friction braking technology for HPDE, track days, club racing, and competitive motorsport. Selecting the correct pad shape and friction compound is essential for achieving predictable braking response, proper caliper fitment, and consistent performance.
PFC 7781 Brake Pad Specifications
Manufacturer: Performance Friction (PFC)
Pad Shape: 7781
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Friction Material Thickness: 15 mm (excluding backing plate)
Friction Surface: Curved profile with two angled grooves
Application: Compatible performance and motorsport brake calipers
Precision PFC 7781 Brake Pad Geometry
The PFC 7781 features two upper mounting holes, a distinctive backing plate profile, and a curved friction surface with two angled grooves. Its shallow concave lower edge and specialized mounting geometry distinguish it from other racing brake pad shapes.
These details are important when identifying replacement brake pads, particularly for vehicles equipped with aftermarket racing calipers or optional high-performance brake systems.
Performance Friction Racing Brake Technology
Performance Friction develops advanced racing brake pads and braking systems for demanding motorsport applications. Its competition-focused friction materials are engineered to deliver braking characteristics suited to different vehicles, operating temperatures, and racing requirements.
Depending on the selected compound, PFC racing brake pads can offer different combinations of initial bite, brake torque, modulation, temperature stability, and wear characteristics.
Why Choose PFC 7781 Racing Brake Pads?
Precision backing plate geometry for compatible racing calipers
132 mm overall width and 77 mm overall height
62 mm friction material depth
15 mm friction material thickness
Distinctive dual-groove friction surface
Performance Friction motorsport braking technology
PFC 7781 Brake Pad Fitment and Compatibility
Correct brake pad fitment requires matching the backing plate outline, mounting-hole locations, friction surface geometry, and pad thickness to the vehicle's brake caliper.
Before ordering, compare your existing pads with the PFC 7781 technical drawing. Confirm the 132 mm overall width, 77 mm overall height, 62 mm friction depth, and 15 mm friction material thickness.
The 15 mm thickness measurement excludes the steel backing plate. It should not be confused with the complete assembled brake pad thickness.
Vehicle make and model alone may not establish compatibility, particularly when aftermarket racing calipers or optional performance brake packages are installed.
Frequently Asked Questions About PFC 7781 Brake Pads
What are the dimensions of the PFC 7781 brake pad?
The PFC 7781 measures 132 mm wide by 77 mm high, with a 62 mm friction material depth and 15 mm friction material thickness excluding the backing plate.
Does the 15 mm thickness include the backing plate?
No. The 15 mm measurement refers exclusively to the friction material thickness. The steel backing plate is not included.
How do I identify the PFC 7781 pad shape?
The 7781 features two upper mounting holes, a curved friction surface, two angled friction grooves, and a shallow concave lower edge. Compare these features and the dimensions with your existing brake pads.
Are PFC 7781 brake pads suitable for track days?
The PFC 7781 pad shape may be used in compatible performance braking systems. Suitability for track days or racing depends on the selected friction compound, vehicle configuration, and operating conditions.
Can I use PFC 7781 brake pads with aftermarket calipers?
Yes, provided the aftermarket caliper requires the PFC 7781 backing plate geometry and appropriate pad thickness. Always confirm compatibility before ordering.
Buy PFC 7781 Racing Brake Pads at Competition Motorsport
Competition Motorsport specializes in Performance Friction racing brake pads, motorsport braking components, and professional racing equipment for HPDE enthusiasts, track-day drivers, club racers, and professional race teams.
Contact our motorsports specialists for assistance confirming PFC 7781 fitment and selecting the appropriate friction compound for your vehicle and braking requirements.
Racing Technologies P1012 Brake Pads (Front)
from $581.00
Racing Technologies P1012 Brake Pads (Front)
Fitment Guide Racing Technologies P1012 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 19
X
Chevrolet
Corvette C7 Z51
14 - 19
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] Gen IX and X
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
The Race Technologies P1012 brake pad is a performance-focused pad shape engineered for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth and 15 mm pad thickness, the P1012 features a distinctive backing plate profile and curved friction surface designed for demanding braking applications.
Competition Motorsport offers the Race Technologies P1012 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for a track weekend or competitive racing, choosing the correct pad shape and compound is essential for predictable, consistent braking performance.
Race Technologies P1012 Brake Pad Specifications
Pad Shape: P1012
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Pad Thickness: 15 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound
The P1012 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its specialized mounting geometry makes accurate shape identification important when replacing existing brake pads or selecting friction materials for compatible performance calipers.
Always compare the P1012 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 provides a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking performance across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1012 compound depends on the vehicle's intended use and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1012 Brake Pads?
The Race Technologies P1012 combines a 132 mm overall width with a 77 mm height, 62 mm friction material depth, and 15 mm thickness. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible high-performance braking systems.
Distinctive Race Technologies P1012 backing plate geometry
132 mm overall width and 77 mm overall height
62 mm friction material depth
15 mm nominal pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1012 Brake Pad Fitment
The Race Technologies P1012 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, 15 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1012 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1012 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Goodridge G-Stop Stainless Brake Lines | Camaro SS (2010-15)
$541.00
Goodridge G-Stop High Performance Stainless Brake Lines
This Kit Fits the Chevrolet Camaro SS without Brembo brakes (2010-15)
Goodridge G-Stop high performance brake lines for the Camaro SS with Brembo brakes consist of the finest quality PTFE inner hose covered by a braided stainless steel outer casing. This gives you a much firmer, more responsive brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, making them ideal for the very high brake pressures seen during HPDE track days. G-Stop High Performance Brake lines are abrasion and corrosion resistant so they last a long time under harsh conditions.
Goodridge G-Stop high performance brake lines are direct bolt-on replacements for all of the rubber brake lines in your Camaro's brake system1. Four brake lines are included in each kit, with hose ends and brake line brackets that match the car’s original equipment.
Conforming to Federal Motor Vehicle Safety Standard Number 106, Goodridge G-Stop high performance brake lines are U.S. DOT certified and T.U.V. approved. All Goodridge G-Stop brake lines go through a nine-point Quality Assurance testing process that includes measuring tensile strength and the ability to sustain line pressures to 3,000 psi.
Goodridge G-Stop Stainless Brake Line Details:
Precise fit for your Camaro SS without Brembo brakes
Greater braking efficiency
Resistance to abrasion and corrosion
Firmer pedal under heavy braking
Added reliability, safety and brilliant looks
Technically superior and race proven
DOT, TUV, ADR, DEKRA, ARAICCC, ISO9001 Accredited. FMVSS 106 compliant
DOT approved
1 Note: Brake components should be installed by a competent mechanic in a professional manner. Incorrect installation of brake components can be a major safety hazard.
Race Technologies P1015 Racing Brake Pads (Front)
from $508.00
Race Technologies P1015 / 2368 Racing Brake Pads
Race Technologies P1015 / 2368 Racing Brake Pads Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vanquish
03 - 08
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Cadillac
CTS-V (6 piston front caliper)
10 - 14
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro ZL1 [Gen 5]
12 - 15
X
Chevrolet
Camaro ZL1 and ZL1 1LE [Gen 6]
16 -
X
Dodge
Challenger HellCat & 392
15 -
X
Dodge
Viper
01 - 02
X
Ferrari
360 all models
99 - 05
X
X
Ferrari
F430 [cast iron brakes]
05 - 10
X
X
KTM
X-Bow
08 -
X
Lancia
Delta 2.0 HF Int.16V Evo
91 - 94
X
Lotus
Esprit Turbo
94 - 96
X
X
Maserati
Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm]
13 -
X
Maserati
Grand Turismo
07 -
X
Peugeot
406 Coupe Brembo brake
97 - 04
X
Renault
Clio II 3.0 V6 mid engine
00 - 05
X
X
Seat
Leon 1.8T Cupra R (Brembo)
03 - 06
X
Seat
Leon 2.8 Cupra 4 (Brembo)
01 - 06
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
The Race Technologies P1015.15 brake pad features a compact, purpose-built backing plate designed for compatible high-performance braking systems. Measuring 110 mm wide by 69 mm high with a 52 mm friction material depth, the P1015 combines a distinctive curved friction surface with a low-profile mounting design for demanding performance driving applications.
Available from Competition Motorsport in RE10 racing and TS20 street/track compounds, the Race Technologies P1015.15 allows drivers to select the friction characteristics best suited to their vehicle, brake system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, proper pad shape identification and compound selection are essential for consistent braking performance.
Race Technologies P1015 / 2368 Brake Pad Specifications
Pad Shape: P1015
Part Designation: P1015.15
Overall Width: 110 mm
Overall Height: 69 mm
Friction Material Depth: 52 mm
Nominal Pad Thickness: 15 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
The P1015 features two upper retaining openings, a curved upper friction edge, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible brake calipers.
Always compare the P1015 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to deliver consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1015 brake compound depends on how the vehicle is used and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1015 Brake Pads?
The Race Technologies P1015 combines a compact 110 mm overall width with a 69 mm height and 52 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems.
Distinctive Race Technologies P1015 backing plate geometry
110 mm overall width and 69 mm overall height
52 mm friction material depth
15 mm nominal pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1015 Brake Pad Fitment
The Race Technologies P1015 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 110 mm overall width, 69 mm overall height, 52 mm friction material depth, 15 mm thickness, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1015 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1015.15 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Race Technologies P1015 Racing Brake Pads (Rear)
from $508.00
Race Technologies P1015 / 2368 Racing Brake Pads
Race Technologies P1015 / 2368 Racing Brake Pads Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vanquish
03 - 08
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Cadillac
CTS-V (6 piston front caliper)
10 - 14
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro ZL1 [Gen 5]
12 - 15
X
Chevrolet
Camaro ZL1 and ZL1 1LE [Gen 6]
16 -
X
Dodge
Challenger HellCat & 392
15 -
X
Dodge
Viper
01 - 02
X
Ferrari
360 all models
99 - 05
X
X
Ferrari
F430 [cast iron brakes]
05 - 10
X
X
KTM
X-Bow
08 -
X
Lancia
Delta 2.0 HF Int.16V Evo
91 - 94
X
Lotus
Esprit Turbo
94 - 96
X
X
Maserati
Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm]
13 -
X
Maserati
Grand Turismo
07 -
X
Peugeot
406 Coupe Brembo brake
97 - 04
X
Renault
Clio II 3.0 V6 mid engine
00 - 05
X
X
Seat
Leon 1.8T Cupra R (Brembo)
03 - 06
X
Seat
Leon 2.8 Cupra 4 (Brembo)
01 - 06
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
The Race Technologies P1015.15 brake pad features a compact, purpose-built backing plate designed for compatible high-performance braking systems. Measuring 110 mm wide by 69 mm high with a 52 mm friction material depth, the P1015 combines a distinctive curved friction surface with a low-profile mounting design for demanding performance driving applications.
Available from Competition Motorsport in RE10 racing and TS20 street/track compounds, the Race Technologies P1015.15 allows drivers to select the friction characteristics best suited to their vehicle, brake system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, proper pad shape identification and compound selection are essential for consistent braking performance.
Race Technologies P1015 / 2368 Brake Pad Specifications
Pad Shape: P1015
Part Designation: P1015.15
Overall Width: 110 mm
Overall Height: 69 mm
Friction Material Depth: 52 mm
Nominal Pad Thickness: 15 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
The P1015 features two upper retaining openings, a curved upper friction edge, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible brake calipers.
Always compare the P1015 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to deliver consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1015 brake compound depends on how the vehicle is used and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1015 Brake Pads?
The Race Technologies P1015 combines a compact 110 mm overall width with a 69 mm height and 52 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems.
Distinctive Race Technologies P1015 backing plate geometry
110 mm overall width and 69 mm overall height
52 mm friction material depth
15 mm nominal pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1015 Brake Pad Fitment
The Race Technologies P1015 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 110 mm overall width, 69 mm overall height, 52 mm friction material depth, 15 mm thickness, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1015 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1015.15 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Carbotech CT1474 Brake Pads
from $454.00
Carbotech CT1474 Brake Pads
Carbotech CT1474 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
DB11 [cast iron brakes]
16 - 23
X
Aston Martin
Vantage [cast iron brakes] street car
18 -
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C6 Brembo 6 piston non ceramic
09 - 13
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
X
Ford
GT
04 - 06
X
X
Ford
Ford GT (second generation) ceramic brakes
17 -
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15 disc]
07 - 14
X
Honda (Acura)
Civic Type R [Brembo brakes] IX and X generation
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4 piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Renault
Mégane III 2.0 RS [Brembo brakes] without electronic hand brake
08 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT1474 Brake Pads FAQs
How do I know if CT1474 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT1474 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.
Race Technologies P1013 Brake Pads (Rear)
from $435.00
Race Technologies P1013 Brake Pads (Rear)
Fitment Guide Race Technologies P1013 / 1404 Brake Pad (FMSI 2487)Fits the Following Calipers:
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
DB11 [cast iron brakes]
16 - 23
X
Aston Martin
Vantage [cast iron brakes] street car
18 -
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C6 Brembo 6 piston non ceramic
09 - 13
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Ford GT (second generation) ceramic brakes
17 -
X
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
The Race Technologies P1013 brake pad features a distinctive wide-format backing plate designed for compatible high-performance brake calipers. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth, the P1013 combines a curved friction surface with two angled friction grooves and specialized mounting features for demanding performance driving and motorsport applications.
Competition Motorsport offers the Race Technologies P1013 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, selecting the correct pad shape and compound is essential for proper fitment and predictable braking performance.
Race Technologies P1013 Brake Pad Specifications
Pad Shape: P1013 / 1404
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
The P1013 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers.
Always compare the P1013 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1013 brake compound depends on how the vehicle is used and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1013 Brake Pads?
The Race Technologies P1013 combines a 132 mm overall width with a 77 mm height and 62 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems.
Distinctive Race Technologies P1013 backing plate geometry
132 mm overall width and 77 mm overall height
62 mm friction material depth
Two angled friction grooves shown in the technical drawing
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1013 Brake Pad Fitment
The Race Technologies P1013 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1013 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1013 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Race Technologies P1013 Brake Pads (Front)
from $435.00
Race Technologies P1013 Brake Pads (Front)
Fitment Guide Race Technologies P1013 / 1404 Brake Pad (FMSI 2487)
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
Ford
GT
04 - 06
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc]
07 - 14
X
Honda
Civic Type R [Brembo brakes] Gen IX and X
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Fits the Following Calipers:
Make
Type
Remarks
Shape No.
Brembo
M4 in combination w/ 62mm radial disc swept depth
16mm
2487
The Race Technologies P1013 brake pad features a distinctive wide-format backing plate designed for compatible high-performance brake calipers. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth, the P1013 combines a curved friction surface with two angled friction grooves and specialized mounting features for demanding performance driving and motorsport applications.
Competition Motorsport offers the Race Technologies P1013 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, selecting the correct pad shape and compound is essential for proper fitment and predictable braking performance.
Race Technologies P1013 Brake Pad Specifications
Pad Shape: P1013 / 1404
Overall Width: 132 mm
Overall Height: 77 mm
Friction Material Depth: 62 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
The P1013 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers.
Always compare the P1013 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1013 brake compound depends on how the vehicle is used and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1013 Brake Pads?
The Race Technologies P1013 combines a 132 mm overall width with a 77 mm height and 62 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems.
Distinctive Race Technologies P1013 backing plate geometry
132 mm overall width and 77 mm overall height
62 mm friction material depth
Two angled friction grooves shown in the technical drawing
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1013 Brake Pad Fitment
The Race Technologies P1013 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1013 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1013 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
Carbotech CT1001 Brake Pads
from $367.00
Carbotech CT1001 Brake Pads
Carbotech CT1001 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
DB11 [cast iron brakes]
16 - 23
X
Aston Martin
Vantage [cast iron brakes] street car
18 -
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Audi
RS3 Sportback [8PA]
11 - 12
X
Audi
TT RS 2.5 Quattro
09 - 14
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Corvette C6 Brembo 6 piston non ceramic
09 - 13
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z51
14 -
X
Dodge
Viper SRT TA (time attack)
14 - 17
X
X
Ford
GT
04 - 06
X
X
Ford
Ford GT (second generation) ceramic brakes
17 -
X
Ford
Mustang Boss 302
12 - 13
X
Ford
Mustang GT [4 piston Brembo]
11 - 14
X
Ford
Mustang Shelby GT500 [4 piston Brembo caliper / 15 disc]
07 - 14
X
Honda (Acura)
Civic Type R [Brembo brakes] IX and X generation
15 -
X
Hyundai
Genesis Coupe 3.8 track
10 - 16
X
KIA
Stinger 3.3 T-GDI V6 [4 piston Brembo]
18-
X
Maserati
Ghibli (M157) [4 piston Brembo caliper / disc ø 345mm]
13 -
X
Mitsubishi
Lancer Evo V - Evo IX
98 - 06
X
Mitsubishi
Lancer Evo X
07 - 16
X
Renault
Mégane III 2.0 RS [Brembo brakes] without electronic hand brake
08 - 16
X
Subaru
STI 3rd & 4th generation
03 - 16
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT1001 Brake Pads FAQs
How do I know if CT1001 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT1001 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.
Carbotech CT1053 Brake Pads
from $329.00
Carbotech CT1053 Brake Pads
Carbotech CT1053 Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vanquish
03 - 08
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Cadillac
CTS-V (6 piston front caliper)
10 - 14
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro ZL1 [Gen 5]
12 - 15
X
Chevrolet
Camaro ZL1 and ZL1 1LE [Gen 6]
16 -
X
Dodge
Challenger HellCat & 392
15 -
X
Dodge
Viper
01 - 02
X
Ferrari
360 all models
99 - 05
X
X
Ferrari
F430 [cast iron brakes]
05 - 10
X
X
KTM
X-Bow
08 -
X
Lancia
Delta 2.0 HF Int.16V Evo
91 - 94
X
Lotus
Esprit Turbo
94 - 96
X
X
Maserati
Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm]
13 -
X
Maserati
Grand Turismo
07 -
X
Peugeot
406 Coupe Brembo brake
97 - 04
X
Renault
Clio II 3.0 V6 mid engine
00 - 05
X
X
Seat
Leon 1.8T Cupra R (Brembo)
03 - 06
X
Seat
Leon 2.8 Cupra 4 (Brembo)
01 - 06
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT1053 Brake Pads FAQs
How do I know if CT1053 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT1053 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.