Karting Helmets Karting Helmets

Arai SK-6 Adult Karting Helmet Being the dominant helmet on the Formula 1 grid, winning an IRL Championship, and protecting the heads of NASCAR heroes like Gordon, Burton, and Montoya has put Arai on the receiving end of an abundance of world-class racing helmet input. The Arai SK-6 Karting Helmet reaps the benefits of all this input. Designed by Arai specifically for karting, the SK-6 adds a ton of features and advancements to the already-impressive list of its predecessor. Make It Comfortable Then Add Lightness You won’t believe the comfort, lightness, and feeling of confidence the Arai SK-6 gives you, thanks to its incredibly strong, proprietary cLc (Complex Laminate Construction) shell. Its strength allowed Arai to give the SK-6 an extremely soft EPS liner for better comfort and impact energy management. If you’re serious about taking your karting to the next level, choose the helmet that’s already there. The Arai SK-6 is Snell K2020 certified. Arai SK-6 Adult Karting Helmet Details Positive shield lock mechanism provides solid latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design. A feature taken directly from the new Arai GP-6PED auto racing helmet. New shield pivot hardware improves aerodynamics. Type "6" 3mm shield. Wider eye port for increased peripheral field of view. Larger intake vent toggles for easier operation. Large rear vents for improved ventilation. Features taken directly from the new Arai GP-6PED auto racing helmet. New "Removable/Replaceable" cheek pad design allows for custom fitting with optional thicknesses (15mm, 20mm, 25mm, 30mm). Cheek pad covers are also removable to allow for easier and more thorough cleaning. Newly-sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed as well as lowers the center of gravity. Rise in shell above the shoulders for added clearance. An effective racing helmet is one that fits properly. Have an assistant use a measuring tape or a piece of string to measure the circumference of your head, starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It's a good idea to take several measurements and use the largest one.

Arai CK-6 Youth Karting Helmet The Arai CK-6 is designed specifically for junior kart racers who are too small to comfortably fit and/or support the weight of an Arai SK-6 adult karting helmet. Meets the Snell/FIA CMR-2016 standard for junior karting. Arai CK-6 Youth Karting Helmet Details SRC Superior Resin shell material, developed and formulated in-house at Arai, dramatically improves the bonding properties of standard fibers, allowing the use of less material for reduced weight and lower cost. Removable/replaceable cheek pads in optional sizes allow for custom fit when needed. Easily removable 5mm top layer of foam allows for further custom fitting. Wide and tall eye port for an exceptional field of view. Large intake vent toggles for easy operation, with large rear vents for improved ventilation. Features taken directly from the GP-6PED auto-racing helmet. Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it's needed while lowering the center of gravity. Rise in shell above the shoulders for added clearance. Sizing Specific To Young Kart Racers XXS: 50-51cm XS: 52-53cm S: 54-56cm M: 57-58cm L: 59cm An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.

Bell Racing Helmets KC7-CMR "Lewis Hamilton" Karting Helmet F1 World Champion Lewis Hamilton Designs Special-Edition Bell Karting Helmet Bell Racing Helmets teamed up with F1 Multiple World Champion Lewis Hamilton to develop a special “Lewis Hamilton” edition KC7-CMR Karting Helmet beginning with the 2019 racing season. Lewis Hamilton himself worked with Bell’s in-house custom paint team to create a custom graphic for the KC7-CMR with the signature elements and colors of his F1 design. This special edition KC7-CMR features a multi-layer SE07 2mm visor, clear top- and side-air intakes, clear rear spoiler, and HP helmet bag. The KC7-CMR is an ultra-lightweight youth karting helmet incorporating the same technology, aerospace materials, and construction methods used to build the advanced Bell HP7 helmet used by Lewis Hamilton in Formula 1 competition. Sleek, Aerodynamic, Ready For Championships The sleek, aerodynamic design of the Bell KC7-CMR incorporates an advanced ventilation system that can be used with or without air intakes to maximize driver cooling, along with a double-screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR-2016 standard and certified for global competition, the Bell KC7-CMR karting helmet is designed to minimize weight for karting drivers under the age of 18. The Bell KC7-CMR Lewis Hamilton Edition Karting Helmet is the perfect helmet for the next generation of champions as they start their racing careers on the kart track! Bell KC7-CMR Lewis Hamilton Edition Karting Helmet Details Ultra-lightweight carbon/fiberglass shell Snell/FIA CMR-2016 approved Sizes: 54cm to 59cm Weight: 2.6 lbs. (54-56cm);  2.7 lbs. (57-59cm) Advanced multi-density, multi piece liner maximizes energy absorption and impact performance Graphic designs by Lewis Hamilton reflecting his Formula 1 helmet Based on the Bell HP7 auto racing helmet used in Formula 1 Powerful top and chin bar ventilation with 14 air intake and extraction channels Clear top- and side-air intakes, rear spoiler mounted on the helmet Optimized shield design improves aerodynamic behavior and energy absorption Multi-layer SE07 2mm visor Non-fireproof lining for extra durability

Stilo ST5 CMR Kart Racing Helmet NOTE: White/Blue and White/Red color selections have a white exterior with a colored interior only. The ST5 CMR 2016 is one of Stilo's karting helmets that are directly derived from Stilo's auto racing helmets that dominate at the top levels of racing. Drivers rave about the superior comfort levels as well as Stilo’s lightweight construction and unparalleled field of vision, a crucial attribute for karting. The CMR standard was developed jointly by the FIA Institute and Snell Memorial Foundation to ensure safer and lighter weight helmets for karting. The Stilo ST5 CMR Kart delivers, and more. FEATURES: Snell/FIA CMR 2016 certified Youth helmet Exceptional fit; fully adjustable including replaceable cheek and crown pads Great field of vision Best in class aerodynamics with available aero kits Aerodynamics personalization available Patented shield locking mechanism with 2 positions Exceptional air flow EPS cheek pads provide the best in lateral crash safety Lightweight construction 1200 grams CMR version Stilo helmets are worn by winning drivers worldwide, including well known F1 Mercedes driver Valterri Bottas, Monster Energy NASCAR Cup Series Champions Martin Truex, Jimmie Johnson and Kyle Busch, IndyCar Series Champion Tony Kanaan and WRC Champion Sebastion Loeb.

Bell GP2 Youth SFI 24.1 Helmet The GP2 Youth is a perfect choice for young racers new to the sport. Based on traditional F1 styling, the GP2 Youth offers outstanding value, superior features, and excellent fit in a smaller, lightweight configuration. Purpose-built for children who need a youth helmet that is fire-retardant without the bulk of an adult helmet, the GP2 Youth incorporates the same advanced technology, styling, protection, and performance features developed for Bell’s line of professional racing helmets. The SFI Youth Standard is recognized and accepted by racing and karting organizations including the Quarter Midget Association of America (QMA). ADDITIONAL BELL GP2 HELMET SHIELDS AVAILABLE HERE Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL GP 2 racing helmet safe and secure throughout each race weekend. Bell GP.2 YOUTH KART HELMET FEATURES Lightweight composite shell Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offer multiple options to install drink tube and radio systems Superior ventilation with direct flow chin bar, forehead vents, and top vents Rear spoilers, top gurney, and chin bar gurneys available separately Removable and replaceable fit pad and cheek pad system M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: 287 SRV, SRV-1 Homologation: SFI 24.1 Youth approved Colors: Metallic Silver, Matte Black, White, Orange Sizes: 4XS, 3XS, 2XS, XS  

Bell Racing Helmets KC7-CMR Charles Leclerc Karting Helmet F1 World Champion Charles Leclerc-Designed Special-Edition Bell Karting Helmet Bell Racing Helmets teamed up with F1 World Champion Charles Leclerc to develop a special edition “Charles Leclerc” KC7-CMR Karting helmet beginning with the 2022 racing season. Charles Leclerc himself worked with Bell’s in-house custom paint team to create a custom graphic for the KC7-CMR with the signature elements and red-and-white Ferrari colors that closely match his Formula 1 helmet. This special edition KC7-CMR features a premium Multi-Layer Red SE07 2mm visor, clear top- and side-air intakes, clear rear spoiler, and HP helmet bag. The KC7-CMR is an ultra-lightweight youth karting helmet incorporating the same technology, aerospace materials, and construction methods used to build the advanced Bell HP7 helmet used by Charles Leclerc in Formula 1 competition. Sleek, Aerodynamic, Ready For Championships The sleek, aerodynamic design of the Bell KC7-CMR incorporates an advanced ventilation system that can be used with or without air intakes to maximize driver cooling, along with a double-screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR-2016 standard and certified for global competition, the Bell KC7-CMR karting helmet is designed to minimize weight for karting drivers under the age of 18. The Bell KC7-CMR Charles Leclerc Edition Karting Helmet is the perfect helmet for the next generation of champions as they start their racing careers on the kart track! Bell KC7-CMR Charles Leclerc Edition Karting Helmet Details Ultra-lightweight carbon/fiberglass shell Snell/FIA CMR-2016 approved Sizes: 54cm to 59cm Weight: 2.6 lbs/1186g (54-56cm);  2.7 lbs/1230g (57-59cm) Advanced multi-density, multi piece liner maximizes energy absorption and impact performance Graphic designs by Charles Leclerc reflecting his Formula 1 helmet Based on the Bell HP7 auto racing helmet used in Formula 1 Powerful top and chin bar ventilation with 14 air intake and extraction channels Clear top- and side-air intakes, rear spoiler mounted on the helmet Optimized shield design improves aerodynamic behavior and energy absorption Multi-Layer Red SE07 2mm visor Comfort-Plus karting style interior with removable/replaceable cheek pads

STILO ST5 KRT KARTING HELMET SK2020 The Stilo ST5 KRT (Kart) Helmet turn heads with style that closely resembles the top of the range ST5 Zero helmet used by many professional racing athletes worldwide. The ST5 Kart is manufactured in a lightweight and very strong composite material and is currently available in white. As with every Stilo helmet, the focus is on safety, comfort and function. The ST5 Kart helmet’s interior has an excellent fit and comfort level due to its dual density interior foam lining. From the first use, karters will truly appreciate the level of comfort it offers.  The ST5 Kart's symmetrical visor offers excellent vision and an effortless central visor locking system that karters will appreciate. The centrally located locking system has dual opening positions allowing adjustment for the visor to be slightly open for extra airflow as preferred by some karters in damp conditions or left completely sealed, but more importantly in both of these positions the visor is locked and will never fly open. The Stilo ST5 Kart Helmet arrives with a 3mm thick FIA F1 standard visor - adding a dramatic improvement in safety. Offered in a large range of different finishes and tints, including colored iridium options that have been added for a totally bespoke finish. In addition a double glazed option is available for racing in wet and cold conditions to prevent misting up. EPS cheek pads provide the best in lateral crash safety, while retaining the functionality of the earmuffs to provide a comfortable aural environment for communication.  Available in gloss white exterior finish, the ST5 Kart is homologated to the Snell K 2020 standard.

Bell Racing Helmets KC7-CMR Champion Karting Helmet The Bell KC7-CMR is a karting-specific helmet based on Bell's top-of-the-line HP7 Carbon auto racing helmet used by many Formula 1 drivers. The Bell KC7-CMR is constructed using an ultra-lightweight Carbon/Kevlar/Glass hand-laminated shell with a 2mm double-screen anti-fog (DSAF) visor for clear vision in all conditions. Bell Racing KC7-CMR Champion Karting Helmet Details Snell/FIA CMR-2016 approved Ultra-lightweight, strong carbon/kevlar/fiberglass composite shell Striking Champion Color graphic designs are sure to get you noticed Bell anti-fog DSAF visor provides excellent visibility 14 air intakes and extraction channels provide optimum airflow through the helmet A range of spoilers and air intakes are available separately Slippery Aerodynamics And Ultra-Cool Airflow The shell of the KC7-CMR is designed to provide the optimum visor location for improved aerodynamics and reduced noise. The powerful top and chin bar vents keep the driver's head cool thanks to a total of 14 air intake and extraction channels. A range of accessories including different visor options, spoilers, and air intakes are available separately. Bell KC7-CMR Karting Helmet Weight Sizes 54-56cm: 2.6 lbs/1185g Sizes 57-59cm: 2.7lbs/1230g

 BELL RS7 K ULTRA-LIGHT CARBON FIBER KARTING HELMET he RS7K Carbon, based on the RS7C LTWT developed in collaboration with Penske Racing, is designed for the professional kart racer who knows weight and optimal performance are linked. The RS7K Carbon is the karting-only version (non-fire retardant, extra durable interior) of the LTWT series and is the lightest adult karting helmet available on the market weighing under 2.75 pounds race-ready. The helmet features a lightweight carbon shell, an innovative shell and recessed shield design to improve acoustic comfort while enhancing aerodynamic performance and energy-absorbing capabilities. The sleek, modern design incorporates an advanced ventilation system, Double Screen Anti-Fog (DSAF) shields, and a rubber gasket seal that ensures that water does not enter the eye opening in rainy conditions. Aerospace grade ultra-lightweight carbon shell Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Multi-purpose fit system that can be used with or without ear cups (ear cups included) Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Rear spoilers, top gurney, and chin bar gurneys available separately Non-fireproof lining for extra durability RS7K Carbon is NOT compatible with head and neck restraint anchor systems or devices Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07 3mm, SV(SE07,SE077) Homologation: Snell K2020 approved Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order) Color: Carbon Gloss Clear Sizes: 7 1/8- (57-) to 7 5/8+ (61+) This helmet will ship to you with signature required for delivery.

ULTRA-LIGHT CARBON FIBER KARTING HELMET Bell Racing is proud to introduce the KC7 CMR Carbon, the first ultra-lightweight carbon fiber youth karting helmet on the market.  Based on the HP7 Formula 1 helmet, this sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels designed to maximize cooling and a double screen anti-fog (DSAF) insert to prevent fogging in rainy conditions. Certified to the FIA/ Snell CMR standard designed for karting drivers under the age of 18, the KC7 CMR Carbon is a winning choice for the next generation of champion drivers. Ultra-Lightweight Carbon Fiber Shell: 2.6 lbs. (sizes 52-56) or 2.7 lbs. (sizes 57-59) Innovative shell and shield design improve acoustic Comfort, Aerodynamic Performance and Energy AbsorptionDesign based on the innovative HP7 used in F1 Advanced Ventilation System with 14 Intake and Extraction Channels Front and Side Air Intakes Available (Sold Separately) Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dust Can’t Penetrate into the Helmet Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds Pro-Style, Multi Foam Density Interior with Superior Moisture Wicking Properties Comfort-Plus Karting Style Interior with Removable / Replaceable Cheek Pads SE07 2MM DSAF Shield (SV SE07 Pivot System) – Clear Shield Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance Draw String Helmet Bag Included Hex Wrench Included FIA/Snell CMR2016 HomologationThis helmet will ship to you with signature required for delivery.

Schuberth SK1 Carbon Fiber Helmet The First CMR Karting Helmet Good Enough To Be A Schuberth SNELL/FIA CMR-2016: The Schuberth SK1 Carbon Fiber Karting Helmet is Snell/FIA CMR-2016 homologated. F1 EXPERIENCE AT YOUR DISPOSAL: The lightweight, hand-laid and autoclave cured carbon fiber shell is derived from Schuberth's experience in Formula 1. In the Schuberth SK1, this technology is specifically adapted to the CMR-2016 homologation. The SK1 helmet is produced with the same technologies used for top-of-the-line FIA 8860-2018 auto racing helmets, included an injection-molded 3mm FIA-homologated visor with a symmetrical opening and Pinlock® 120 mechanical anti-fog, air ventilation system, and aramid chinstrap. EXCEPTIONAL COMFORT: The Schuberth SK1 benefits from all Schuberth experience in making safe and comfortable helmets. The SK1 has dedicated interiors designed specifically to meet the needs of future champions. 16 VENTILATION CHANNELS ON THE SHELL: Optimum cooling air circulation is achieved through aerodynamic design and air flow channels built into the interior EPS, providing the ideal intake of cool air and exhaust of hot air. In open air, the helmet feeds 14 liters of fresh air per second at 62 mph. 3MM THICK, 3D INJECTED VISOR: There are 19 different visors available for the Schuberth SK1, from transparent to dark with several mirrored and multi-layer coating options, along with new High Contrast options. All standard visors are Pinlock® 120 lens equipped providing optimal fog-resistant performance. Tear-off buttons are also installed. VISOR LOCK SYSTEM: A two-stage visor lock ensures the SK1 visor always closes symmetrically and therefore securely. Stage one lets in a small amount of air while the visor is still securely locked. Stage two closes tight to form a firm visor seal that will keep out fine dust and water. Schuberth SK1 Carbon Fiber Karting Helmet Accessories Schuberth SK1 Individual Vent Scoops Available Here Schuberth SK1 Visors Available Here Schuberth SK1 Scoops Available Here

Bell KC7-EV CMS Karting Helmet "Introducing the KC7-EV CMR helmet, meticulously crafted for young kart drivers, offering an enhanced field of vision that's 20mm wider than the BELL KC7 CMR, resulting in 30% increased peripheral visibility. Constructed from a robust blend of carbon/kevlar and fiberglass, its design is inspired by F1 helmets. The helmet boasts an advanced ventilation system, adaptable for aerodynamics with optional air intakes, and features over 14 air channels for optimal airflow. It comes equipped with a double shield anti-fog visor (DSAF) for crystal-clear vision. Meeting the SNELL CMR2016 approval, it's mandated for CIK/FIA kart drivers under 15 and endorsed by FFSA for the same age group, yet is also favored by adults. Note: Not suitable for road use. It features authentic visors from BELL, comes in a pristine white shade, and weighs approximately 1,185g (for sizes 54-56) and 1,230g (for sizes 57-59)."

Bell Racing KC7-CMR Ayrton Senna Karting Helmet This is a special edition of the widely popular Bell KC7-CMR Karting Helmet that honors the racing legend and three-time Formula 1 World Champion Ayrton Senna. Bell Racing Helmets teamed up with Senna Brands and the Ayrton Senna Institute in creating the KC7-CMR Ayrton Senna Karting Helmet. Bell's expert helmet paint team designed the graphics and signature elements to closely match Senna's utterly iconic yellow, blue, and green Formula 1 helmet. Senna, who began his motorsport journey in karting, used the famous yellow, blue, and green colors throughout most of his racing career. The helmet’s design, which features these colors, is instantly recognizable among racing fans. Fully Loaded And Ready For The Podium! This Ayrton Senna helmet edition includes a Multi-Layer Smoke Blue SE07 2mm visor, clear top- and side-air intakes, a clear rear spoiler, and a Bell HP helmet bag. That's more than $300 worth of accessories included! The design of the KC7-CMR karting helmet is taken from Bell Racing's top-of-the-line HP7 Carbon auto racing helmet. The same helmet worn by many Formula 1 and other professional racing drivers. The Bell KC7-CMR Ayrton Senna Helmet is certified to the FIA/Snell CMR-2016 standard and was originally designed for karting drivers under the age of 18. However, adult drivers can still derive benefits from helmets meeting this standard, particularly in karting or similar low-speed motorsport activities. The KC7-CMR Ayrton Senna Helmet was produced under the license of Senna Brands and the Ayrton Senna Institute. Bell Racing KC7-CMR Ayrton Senna Karting Helmet Snell/FIA CMR-2016 approved Lightweight carbon/composite shell Accessories include a Multi-Layer Blue visor, top- and side-air intakes, clear rear spoiler, and a Bell HP helmet bag Weight: 2.6lbs/1186 g (sizes 54-56cm); 2.7lbs/1230g (sizes 57-59cm) Innovative shell and shield designs improve acoustic comfort, aerodynamic performance, and energy absorption Based on the premier Bell Racing HP7 Carbon auto helmet used in Formula 1 Advanced ventilation system with 14 air intake and extraction channels Hollow synthetic rubber gasket seal keeps out air, water, and dust Multi-piece, multi-density high-impact custom bead absorbing liner provides low- and high-velocity impact protection Aerodynamic accessories including chin bar, top Gurneys, and rear spoiler available separately Comfort-Plus karting style interior with removable/replaceable cheek pads Double Screen Anti-Fog (DSAF) visor insert included Bell HP helmet bag included Hex wrench included

Bell Racing KC7-CMR Fernando Alonso Karting Helmet Bell Racing Helmets teamed up with the two-time Formula 1 World Champion Fernando Alonso to create the KC7-CMR Fernando Alonso Karting Helmet. Fernando worked closely with Bell's paint team to ensure the graphics and signature elements closely match his own iconic blue-and-yellow Formula 1 helmet. The design of the KC7-CMR karting helmet is taken from Bell Racing's top-of-the-line HP7 Carbon auto racing helmet. The same helmet worn by many Formula 1 and other professional racing drivers. Feature-Packed And Ready For The Podium The Bell Racing KC7-CMR Fernando Alonso edition karting helmet includes a 2mm Multi-layer Purple visor, top- and side-air intakes, clear rear spoiler, and a Bell HP helmet bag. That's over $300 worth of accessories! The Bell KC7-CMR Fernando Alonso Karting Helmet is certified to the Snell/FIA CMR-2016 standard and is designed specifically for kart drivers under 18 years of age. Fernando Alonso's signature helmet design is a must for all Alonso fans! Bell Racing KC7-CMR Fernando Alonso Karting Helmet Snell/FIA CMR-2016 approved Lightweight carbon/composite shell Accessories include a Multi-layer Purple visor, top- and side-air intakes, clear rear spoiler, and a Bell HP helmet bag Weight: 2.6lbs/1186 g (sizes 54-56cm); 2.7lbs/1230g (sizes 57-59cm) Innovative shell and shield designs improve acoustic comfort, aerodynamic performance, and energy absorption Based on the premier Bell Racing HP7 Carbon auto helmet used in Formula 1 Advanced ventilation system with 14 air intake and extraction channels Hollow synthetic rubber gasket seal keeps out air, water, and dust Multi-piece, multi-density high-impact custom bead absorbing liner provides low- and high-velocity impact protection Aerodynamic accessories including chin bar, top Gurneys, and rear spoiler available separately Comfort-Plus karting style interior with removable/replaceable cheek pads Double Screen Anti-Fog (DSAF) visor insert included DHP helmet bag included Hex wrench included