Helmet Ventilation

Stilo Stilo Helmet Non-Adjustable Top Air System For Maglock $294.00 $329.00

Stilo Helmet Non-Adjustable Top Air System For Maglock Keep Your Stilo ST5 & ST6 Helmet Ventilated With The Stilo Top Air Kit For Maglock Systems Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. Stilo Top Air System Designed to Be Used With Maglock System This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 & ST6 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are six small ventilation holes molded into the top of every ST5 & ST6 helmet. Stilo's Top Air system fits over the center four holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the top side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Two Sizes For An Optimum Fit Stilo's Top Air System can be fitted to all Stilo ST5 or ST6 model helmets. To best fit your specific Stilo helmet, the Top Air System comes in two sizes as follows: YA0893-S Non-Adjustable for helmets XS (54cm) to L (59cm) YA0894-S Non-Adjustable for helmets L+ (60cm) to XXXXL (64cm)

Stilo Stilo Short Top Air System For Maglock (fits ST5 and ST6) $329.00

Stilo Short Top Air System For Maglock Keep Your Stilo ST5 or ST6 Helmet Ventilated With The Stilo Top Air Maglock Kit The exclusive Stilo "Top Air System" for ST5 or ST6 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the new innovative Top Air outlet you can now quickly connect your fresh-air system to your Stilo ST5 helmet. This kit does not come with a flow adjuster. Air enters your Stilo ST5 or ST6 through four small ventilation holes molded into the top of the helmet shell. That way, forced cooling air fed into the Top Air is directed to the top of the head . Warm, moist exhaust air flows out through the side holes on top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Short Top Air Maglock System can be fitted to all Stilo ST5 and ST6 model helmets.

Sold out

Stilo Stilo Short 90 Degree Top Air System For Maglock (Fits ST5 & ST6) $365.00

Stilo ST5 & ST6 Short 90 Degree Top Air System For Maglock Keep Your Stilo ST5 & ST6 Helmet Ventilated With The Stilo Top Air 90 Degree Maglock Kit The exclusive Stilo "Top Air System" for ST5 & ST6 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with your Maglock system. With the innovative 90º system, you can now quickly connect your fresh-air system to your Stilo ST5 or ST6. This kit does not come with a flow adjuster. Cooling air can enter every Stilo ST5 or ST6 auto racing helmet through four small ventilation holes molded into the top. Thus, cool air fed into this Top Air System is directed to the top of the head. Warm, moist exhaust air flows out through the side holes on top of the helmet and from the bottom of the helmet. This helps significantly reduce CO2 buildup inside your helmet. Stilo's Top Air 90 Degree Maglock System can be fitted to all Stilo ST5 & ST6 model helmets.

Stilo Stilo Non-Adjustable Helmet Top Air System (Aluminum Oval Intake) $183.00

Stilo Non-Adjustable Helmet Top Air System (Aluminum Oval Intake) - Fits ST5 & ST6 Keep Your Stilo ST5 & ST6 Helmet Ventilated With The Stilo Top Air Kit Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 & ST6 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. This Stilo Top Air System can be fitted to all Stilo ST5 & ST6 model helmets. It comes in two sizes to best fit your helmet: YA0834 Non-Adjustable for helmets XS (54cm) to L (59cm) YA0857 Non-Adjustable for helmets L+ (60cm) to XXXXL (64cm)

Bell 10 Hole Top Air - Competition Motorsport

Bell Bell 10 Hole Top Air from $117.00

Bell 10 Hole Top Air Enhancing Helmet Ventilation for Optimal Airflow and Comfort The Bell Helmets 10 Hole Top Air kit is designed to utilize the top and forehead ventilation channels on compatible Bell racing helmets. The Bell 10 Hole Top Air attachment allows your helmet to be cooled by an in-car forced air system. Bell's Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging. The kits are attached using aggressive double-sided adhesive, and are available in Clear Plastic or Carbon Fiber. Nozzle configurations include V05, V05 45o, 90o, or Quick Lock V10. Bell's 10 Hole Top Air is fully compatible with the Maglock system using the standard V05 nozzle. The Bell 10 Hole Top Air Fits the Following Helmets: HP7 HP5 RS7C LTWT RS7 Carbon RS7 Pro GT5 GT5 Carbon

Stilo Stilo ST5 Side Air Kit $73.00

Side Air Kit For All Stilo ST5 and ST5.1 Helmets Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. Th Stilo Side Air Kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. It's especially useful in small, low cockpits where there's not enough room for a top-air kit. Must be used in conjunction with the Stilo Side Air Adapter Hose YA0639.

Stilo Stilo ST5 Side Air Adapter Hose $73.00

Stilo ST5 Side Air Adapter Hose Connects Standard Forced-Air To Stilo ST5 Side Air Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. Must be used in conjunction with Stilo Side Air Kit YA0653. Stilo ST5 Side Air Adapter Hose SKU: YA0639

Schuberth Schuberth SP1 Top Air (Low Headroom) $161.00

Schuberth SP1 Top Air Add Top Air Ventilation to Your Schuberth SP1 Schuberth's flat, low-headroom top air attachment lets you connect your Schuberth SP1 helmet to your forced-air ventilation system. The Schuberth SP1 Top Air attaches to the top of the SP1 using high strength double-sided adhesive, and allows drivers to pump fresh air through the dedicated air channels within the helmet EPS. Add cooling fresh air to your Schuberth SP1 Carbon helmet without compromising roof clearance. Choose from large- or small-inlet connector.

Schuberth Schuberth SP1 Top Scoop $73.00

Schuberth SP1 Top Vent Scoop Clear top vent scoop directs cooler outside air into the Schuberth SP1 Carbon's top vents. Choose Standard or Flat style.

Schuberth Schuberth SP1 Individual Top Vent Scoops $44.00

Schuberth SP1 Individual Top Vent Scoops Individual vent scoops direct cooler air into the Schuberth SP1 Carbon helmet's top vents. Can be purchased individually or in packs of three or six.

Bell Bell Forced Air Low Profile Nozzle & Cover Plate (HP6/GT6 Helmet) $44.00

Bell Forced Air Low Profile Nozzle & Cover Plate Adds Genuine Bell Forced-Air Nozzle to Your HP6 or GT6 Helmet This clear plastic Bell Helmets forced-air kit consists of the following: (1) Forced-air low profile nozzle (1) Cover plate (2) Seal kits Each seal kit contains two pieces of 20 x 80mm and two pieces of 20 x 120mm double-sided tape.