650S

McLaren Front Rotors (Girodisc A1-159) The Girodisc 394mm Front Rotor Conversion for McLaren models provides a lightweight, high-performance alternative to the OEM carbon-ceramic rotors. Designed as a direct bolt-on replacement, these two-piece iron rotors retain full compatibility with the factory calipers while improving heat management, serviceability, and overall braking performance. By switching to iron rotors, drivers benefit from enhanced thermal durability and reduced maintenance costs without compromising braking balance or ABS functionality. Vehicle Fitment This Girodisc 394mm front rotor set fits the following McLaren models equipped with OEM carbon-ceramic front rotors: McLaren 540C McLaren 570S / 570GT McLaren 600LT McLaren 650S McLaren 675LT McLaren MP4-12C McLaren 720S (with 394mm front rotors) Direct fit for factory six-piston front calipers. No modifications required. Pad Compatibility To optimize performance and reduce unnecessary weight, these rotors are designed for pads with an annulus (swept area) of 66mm or less. The correct pad shape is the common FMSI D1405, also used on vehicles such as the Nissan GT-R, Cadillac CTS-V, and many AMG Mercedes models with six-piston calipers. Girodisc offers several pad compounds in this shape; contact us for recommendations. Performance and Design The rotor assembly combines a 6061-T6 aircraft-grade aluminum hat with a proprietary cast iron friction ring machined entirely in-house at Girodisc. The curved vane design acts as a centrifugal pump, pulling air through the disc to improve cooling efficiency under sustained high temperatures. The result is consistent braking performance, reduced fade, and improved pedal feel in both track and street conditions. Features - Direct replacement for OEM 394mm carbon-ceramic rotors; no modifications required. - Two-piece floating design reduces unsprung and rotating mass for sharper response. - 6061-T6 aluminum hat mated to a proprietary cast iron rotor ring for strength and thermal control. - Curved vane internal design promotes efficient airflow and heat dissipation. - Floating mount system with 12 high-strength alloy steel drive pins for controlled axial and radial float. - Anti-noise spring washers eliminate rattle during street use while maintaining float under race conditions. - Cadmium-plated hardware ensures corrosion resistance and longevity. - Fully machined and assembled in the USA to Girodisc motorsport-grade specifications. Specifications Rotor Diameter: 394mmRotor Type: Two-piece floatingPad Shape: FMSI D1405 (≤66mm annulus)Material: Proprietary cast iron with 6061-T6 aluminum hatHardware: 12 alloy steel drive pins with anti-noise spring washersFitment: McLaren models with 394mm OEM carbon-ceramic rotorsSold as: Pair (left and right front rotors) FAQs: McLaren 394mm Front Rotors (Girodisc) Why do I need to change the pad shape? To maintain optimal weight and heat capacity, the Girodisc rotors use a smaller 66mm swept area. The FMSI D1405 pad shape provides the correct fit and performance balance. Can I reuse my OEM pads? No. The OEM pads are designed for the full annulus of the carbon-ceramic rotors and are too large for this conversion. Are these rotors noisy? No. Anti-noise spring washers prevent rattle during normal driving while allowing full float under heat. What are the main benefits over OEM carbon-ceramic rotors? Improved serviceability, enhanced thermal consistency, and a major cost reduction for replacement and maintenance. Can the rotors be serviced? Yes. When the cast iron rings wear out, they can be replaced individually, allowing the aluminum hats and hardware to be reused. Ordering Information Sold and priced per pair. Includes left and right Girodisc 394mm front iron rotors for McLaren models equipped with OEM carbon-ceramic brakes. Requires FMSI D1405 pad shape for installation.

Girodisc McLaren 380mm Rear Rotors Replace your factory carbon-ceramic rotors with Girodisc’s precision-engineered 380mm rear iron rotors for McLaren models. Designed as a direct bolt-on upgrade, these lightweight two-piece rotors deliver superior heat management, lower operating costs, and race-proven reliability—perfect for high-performance street driving or track duty. Direct Replacement for OEM Carbon-Ceramic Rotors The Girodisc system installs directly onto the McLaren’s factory hubs and calipers—no modifications required. Each rotor features a CNC-machined 6061-T6 aluminum hat and a proprietary high-carbon cast-iron friction ring. The floating two-piece design allows for controlled thermal expansion, maintaining consistent pad contact under extreme braking loads. The curved vane design functions as a centrifugal pump, drawing cooling air through the disc to regulate temperatures lap after lap. Features • Direct replacement for OEM 380mm carbon-ceramic rear rotors• 6061-T6 billet aluminum hats with hard-anodized finish• Proprietary high-carbon cast-iron friction rings poured and machined in the USA• Floating mount system with 12 cadmium-plated drive pins• Anti-noise spring washers eliminate rattle while maintaining float• Curved internal vanes provide superior airflow and cooling• Fully rebuildable—replace only the iron rings when worn• Sold/priced per pair Vehicle Fitment McLaren 650S (2014–2017)McLaren 675LT (2016–2017)McLaren 570S / 540C / 600LT (2015–2021)McLaren 720S (2018–2023)Compatible with OEM carbon-ceramic braking systems and Brembo rear calipers. Girodisc A2-159 Rear Rotor FAQs: Can these rotors replace McLaren’s OEM carbon-ceramic setup? Yes. Girodisc designed this kit as a direct iron conversion that reuses the original calipers, hubs, and mounting hardware. What benefits do iron rotors provide over CCM rotors? Iron rotors offer greater heat capacity, improved modulation, and much lower replacement costs while maintaining excellent street manners. Are these rotors compatible with factory ABS and traction control? Absolutely. Girodisc maintains OEM dimensions to ensure perfect compatibility with McLaren’s advanced brake electronics. How do these perform under extended track use? Expect consistent pedal feel, reduced fade, and stable braking throughout long sessions—especially when paired with high-temperature pads and fluid. Enhance your McLaren’s braking consistency and reliability with Girodisc’s 380mm rear rotors—precision-built for performance, endurance, and confidence at every corner.

D1-159 Girodisc McLaren 394mm Front Replacement Rings Renew your McLaren’s braking performance with Girodisc D1-159 394mm front replacement rings. These precision-engineered components bolt directly to your existing Girodisc aluminum hats using the supplied floating hardware kit. Each ring is machined from Girodisc’s proprietary high-carbon cast iron for superior thermal control, balanced response, and fade-free braking under extreme track conditions. Vehicle Fitment Compatible with:• McLaren 540C / 570S / 570GT / 600LT (Front)• McLaren 650S / 675LT (Front)• McLaren MP4-12C (Front)Note: Designed for Girodisc 394mm two-piece front rotor systems. Not compatible with OEM carbon-ceramic rotors or one-piece iron discs. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 394mm two-piece front rotors• CNC-machined from high-carbon cast iron for durability and high-temperature stability• Directional curved vanes accelerate airflow for maximum cooling efficiency• Maintains factory brake bias, ABS, and stability control calibration• Precision-balanced for smooth, vibration-free operation• Designed exclusively for Girodisc aluminum hats used in McLaren iron-conversion systems Specifications • Diameter: 394 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and new hardware kit• Sold/priced per pair Girodisc D1-159 McLaren 394mm Front Replacement Ring FAQs Can I use these with McLaren’s OEM carbon-ceramic rotors? No. These are for Girodisc steel rotor conversions only and will not fit OEM ceramic brake hardware. What pad compounds are best suited for these rotors? For street/track mix, Pagid RS29 or Ferodo DS2500 pads are excellent. For full track duty, Pagid RSL1 or Endless ME20 are ideal high-temp options. Are these rotors directional? Yes. Each rotor is marked for left and right orientation to ensure the curved vanes channel airflow correctly through the disc for optimal cooling. What’s the service life of these rotors under track use? Typically 20–30 hours of hard circuit time depending on track layout, pad compound, and cooling efficiency. Street-driven cars often exceed 40,000 miles. Upgrade your McLaren’s braking precision with Girodisc D1-159 394mm front replacement rings — race-bred components engineered for stability, cooling, and performance at any speed.

D2-159 Girodisc McLaren 380mm Rear Replacement Rings Refresh the braking performance of your McLaren with Girodisc D2-159 380mm rear replacement rings. These are direct-fit replacements for Girodisc two-piece rear rotors, designed to bolt to your existing aluminum hats using the included floating hardware kit. Replace only the wear surface and maintain your lightweight, high-performance Girodisc setup. Vehicle Fitment Compatible with:• McLaren MP4-12C (rear)• McLaren 570S / 570GT (rear)• McLaren 650S (rear)• McLaren 675LT (rear)• McLaren 720S (rear)Note: For vehicles equipped with Girodisc 380mm two-piece rear rotor systems. Not compatible with OEM or carbon-ceramic rotors. Features • Sold as a left/right pair and includes full hardware kit• Direct replacements for Girodisc 380mm two-piece rear rotors• CNC-machined from high-carbon cast iron for superior heat control• Curved directional vanes increase cooling efficiency• Maintains OEM brake balance and ABS calibration• Designed exclusively for Girodisc aluminum hats – not compatible with OEM or other brands Specifications • Diameter: 380mm• Position: Rear• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rings and new hardware kit• Sold/priced per pair Girodisc D2-159 Replacement Ring FAQs Will these fit OEM McLaren rotors? No. These are made specifically for Girodisc two-piece rotor hats and will not fit factory or carbon-ceramic assemblies. Are both sides included? Yes. Each D2-159 kit includes both left and right replacement rings plus a complete hardware kit. Why replace just the rings instead of the full rotor? It saves cost, retains your Girodisc hats, and restores performance without replacing the full assembly. Can I reuse the old hardware? No. Always install the new floating hardware included in the kit for proper fitment and long-term safety. Upgrade your McLaren’s braking performance with Girodisc D2-159 380mm rear replacement rings — engineered for durability, heat control, and consistent stopping power on both street and track.

Pagid Racing Brake Pad Shape 8091 Fitment Guide for Pagid 8091 Brake Pad Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 2015 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 2009 - 13 X Chevrolet Corvette C6 Brembo [6-piston iron rotors] 2009 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 2015 + X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 2007 - 10 X Ferrari 458 Italia [ceramic brakes] 2010 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 2016 + X Ferrari 599 GTB Fiorano [iron rotors] 2006 - 12 X Ferrari Several ceramic (CCM) brakes X McLaren 570S [ceramic brakes] 2015 + X McLaren 650S / Spyder [ceramic brakes] 2014 - 17 X McLaren 675LT [ceramic brakes] 2015 + X McLaren MP4-12C [ceramic brakes] 2011 - 14 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo XA5.71.xx 6-piston D85 16mm 8091   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. In the 8091 pad shape, the RSL 1 comes in an RSL 1 Special compound, both specified for Brembo and Ford Multimatic applications. Pagid RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.

Performance Friction PFC 1395 Racing Brake Pads Performance Friction PFC 1395 Racing Brake Pad Fitment Guide Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 2015 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 2009 - 13 X Chevrolet Corvette C6 Brembo [6-piston iron rotors] 2009 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 2015 + X Ferrari 430 Challenge [ceramic brakes] 2007-09 X Ferrari 430 Scuderia [ceramic brakes] 2008 - 09 X Ferrari 458 Italia [ceramic brakes] 2010 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 2016 - 23 X Ferrari 599 GTB Fiorano [iron rotors] 2006 - 12 X Ferrari Several ceramic (CCM) brakes X McLaren 570S [ceramic brakes] 2015 + X McLaren 650S / Spyder [ceramic brakes] 2014 - 17 X McLaren 675LT [ceramic brakes] 2015 + X McLaren MP4-12C [ceramic brakes] 2011 - 14 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo XA5.71.xx 6-piston D85 16mm 8091   The Performance Friction PFC 1395 racing brake pad is designed for compatible high-performance brake calipers used in demanding track and motorsport applications. Measuring 189.6 mm wide by 97 mm high, with an 85 mm friction material depth and 17 mm overall thickness, the PFC 1395 features a wide friction surface, distinctive retaining geometry, and two friction grooves. Available at Competition Motorsport in PFC 11 and PFC 331 racing compounds, the 1395 pad shape gives drivers two different approaches to braking performance. Whether you prefer the smooth, progressive characteristics of Compound 11 or the ABS-friendly, high-initial-bite characteristics of Compound 331, selecting the right friction material is essential for consistent braking and driver confidence. Performance Friction PFC 1395 Brake Pad Specifications Manufacturer: Performance Friction (PFC) Pad Shape: 1395 Overall Width: 189.6 mm Overall Height: 97 mm Friction Material Depth: 85 mm Pad Thickness: 17 mm Available Compounds: PFC 11 and PFC 331 Applications: Compatible motorsport brake calipers requiring the 1395 pad shape PFC 11 Racing Compound – Smooth Bite and Progressive Braking Performance Friction Compound 11 is a racing friction material developed for sprint and medium-distance competition. Known for its smooth initial bite and increasing friction characteristics as temperature rises, PFC 11 provides a progressive braking response for drivers who prioritize predictable pedal feel and precise modulation. Compound 11 is well suited to competitive road racing, advanced HPDE, and demanding track applications where repeatable braking response is essential. PFC 331 Racing Compound – High Initial Bite and ABS Compatibility Performance Friction Compound 331 is a degressive racing brake compound developed primarily for front-axle applications. It combines strong initial bite with controlled friction characteristics, making it particularly attractive for racing vehicles equipped with sophisticated ABS systems. Its degressive friction behavior is designed to support braking stability and control while offering favorable pad and rotor wear characteristics. PFC 331 is an excellent option for compatible front brake systems where ABS interaction and predictable high-performance braking are priorities. PFC 11 vs. PFC 331 – Which Compound Should You Choose? PFC 11: Smooth initial bite with friction that increases as temperature rises. Designed for sprint and medium-distance racing applications. PFC 331: Strong initial bite with degressive friction behavior. Developed for front-axle racing applications, with an emphasis on ABS compatibility and low wear. The ideal compound depends on vehicle weight, tire grip, brake balance, ABS calibration, rotor configuration, operating temperatures, and driving style. Contact Competition Motorsport for help selecting the correct PFC friction material. Why Choose Performance Friction PFC 1395 Brake Pads? Competition-focused Performance Friction braking technology 189.6 mm wide backing plate with distinctive retaining geometry 85 mm friction material depth 17 mm overall pad thickness Available in PFC 11 and PFC 331 racing compounds PFC 1395 Brake Pad Fitment and Compatibility The Performance Friction 1395 pad shape is intended for compatible brake calipers requiring its specific backing plate geometry, retaining-hole locations, friction surface dimensions, and overall thickness. Before ordering, verify the 189.6 mm width, 97 mm height, 85 mm friction material depth, and 17 mm thickness against your existing pads or the brake caliper manufacturer's technical specifications. Vehicle make and model alone may not confirm fitment, especially when aftermarket racing calipers or optional performance brake systems are installed. Buy PFC 1395 Racing Brake Pads at Competition Motorsport Competition Motorsport specializes in Performance Friction racing brake pads, high-performance braking components, and professional motorsport equipment for HPDE enthusiasts, club racers, and competitive race teams. Select your preferred PFC 1395 compound, 11 or 331, above. If you need assistance confirming pad shape compatibility or selecting the correct compound, contact our motorsports specialists before ordering.

Pagid Racing Brake Pad Shape 8187 Pagid 8187 Brake Pad Fitment Guide  Make Model Build (Year) Front Rear McLaren 570S [ceramic brakes] 2015 +     X McLaren 650S / Spyder [ceramic brakes] 2014 - 17     X McLaren 675LT [ceramic brakes] 2015 +     X McLaren MP4-12C [ceramic brakes] 2011 - 14     X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.

Ferodo FCP5030 Porsche Brake Pads Ferodo FCP5030 Brake pad Fitment Guide (FMSI D1395) Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Several ceramic brakes CCM X McLaren 570S [ceramic brakes] 15 - X McLaren 650S / Spyder [ceramic brakes] 14 - 17 X McLaren 675LT [ceramic brakes] 15 - X McLaren MP4-12C [ceramic brakes] 11 - 14 X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo FCP5030 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP5030 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP5030 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Pagid Racing Brake Pad Shape 4346 Pagid 4346 Brake Pad Fitment Guide Make Model Build (Year) Front Rear McLaren 570S. 540C, 570GT 2015 + X McLaren 570S GT4 race car 2016 - 17 X McLaren 650S / Spyder 2014 - 17 X McLaren 675LT 2015 + X McLaren MP4-12C 2011 - 14 X McLaren GT 2019 + X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSL 2 Compound RSL 2 is a low metallic resin bonded material containing steel and aramid fibers with high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races on applications with high cooling efficiency. RSL 2 features excellent pad life and modulation, as well as friction stability at high temperatures. Applications include GT cars, touring cars and prototype endurance racing. Due to excellent modulation characteristics, RSL 2 is often also used in sprint races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape 4345 Pagid 4345 Brake Pad Fitment Guide Make Model Build (Year) Front Rear McLaren 570S. 540C, 570GT 2015 + X McLaren 570S GT4 race car 2016 - 17 X McLaren 570S GT4 [race car] (wider front caliper) 2018 + X McLaren 570 S GT4 [race car] Alcon front Calipers 2020 + X McLaren 650S / Spyder 2014 - 17 X McLaren 675LT 2015 + X McLaren MP4-12C 2011 - 14 X McLaren GT 2019 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSL 2 Compound RSL 2 is a low metallic resin bonded material containing steel and aramid fibers with high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races on applications with high cooling efficiency. RSL 2 features excellent pad life and modulation, as well as friction stability at high temperatures. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Carbotech CT1395 Brake Pads Carbotech CT1395 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Several ceramic brakes CCM X McLaren 570S [ceramic brakes] 15 - X McLaren 650S / Spyder [ceramic brakes] 14 - 17 X McLaren 675LT [ceramic brakes] 15 - X McLaren MP4-12C [ceramic brakes] 11 - 14 X Available Carbotech Compounds 1521 — High-performance street compound with low dust, low noise, and excellent release and modulation. AX6 — Autocross-focused compound with strong low-temperature bite and progressive control. XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior. XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance. XP12 — More aggressive race compound with added bite and high-temperature capability. RP2 — Endurance racing compound designed for sustained performance and strong fade resistance. XP20 — Very aggressive racing compound with high torque and extreme heat capability. XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands. How to Choose the Right Compound 1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use. Carbotech CT1395 Brake Pads FAQs How do I know if CT1395 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle. Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications. Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound. Choose the Carbotech CT1395 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.

Pagid Racing Brake Pad Shape 4349 Pagid 4349 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Caterham SP/300.R 2012 - X X Lotus Exige V6 Sport 360 Cup 2015 - X Lotus Exige Sport Cup 2006 - X Fits the Following Caliper: Make Type Remarks Shape No. AP Racing CP7600 D46 14.4mm,16mm 4349, 8076 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

PFC Brake Pads 7838.08.17.44 Fits the Following Cars: Make Model Build (Years) Front Rear McLaren 650S  2014 - 17 X   McLaren 675LT  2015 - 17 X   McLaren MP4-12C  2011 - 14 X   PFC 08 Compound This is one of PFC's most popular compounds, coming to fame in Endurance sports car and GT racing due to its exceptional performance when smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds. PFC08 can easily match the wear characteristics of competitors' friction materials, but with much higher bite and more consistent performance across a broad temperature range.

Carbotech CT1165 Brake Pads Carbotech CT1165ZR Brake Pad Fitment Guide Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Dodge Viper ACR [ceramic brakes] 14 - 17 X Ferrari 360 Challenge Stradale [ceramic brakes] 03 - 05 X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Enzo [ceramic brakes] 02 - 04 X Ferrari F430 [ceramic brakes] 05 - 10 X Ferrari Several ceramic brakes CCM X Lamborghini Aventador LP700-4 [ceramic brakes] 11 - X Lamborghini Several ceramic brakes X Available Carbotech Compounds 1521 — High-performance street compound with low dust, low noise, and excellent release and modulation. AX6 — Autocross-focused compound with strong low-temperature bite and progressive control. XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior. XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance. XP12 — More aggressive race compound with added bite and high-temperature capability. RP2 — Endurance racing compound designed for sustained performance and strong fade resistance. XP20 — Very aggressive racing compound with high torque and extreme heat capability. XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands. How to Choose the Right Compound 1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use. Carbotech CT1165ZR Brake Pads FAQs How do I know if CT1165ZR fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle. Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications. Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound. Choose the Carbotech CT1165ZR compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.

Castrol React SRF Racing Brake Fluid Ultra-High Wet Boiling Point Makes Castrol SRF A Standout Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance. The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids! Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications. Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid. Castrol React SRF Racing Brake Fluid Typical Properties: Dry Boiling Point: 590°F (310°C) Wet Boiling Point: 518°F (270°C) Superior anti-vapor lock properties One-liter (1000ml) bottle