HALO P1 Advanced High Performance Brake Fluid (590 ml)
HALO P1 Advanced High Performance Brake Fluid (590 ml) $110.00
HALO P1 High Performance Brake Fluid The World's Most Advanced Racing Brake Fluid Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide. Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times.Sold in 590 ml (20 fl. oz.) bottles. Features & Benefits That'll Make You Weep Tears of Joy Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners. Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot). World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard. Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills. What Makes Halo P1 The Secret Weapon? While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures. FAQs That'll Clear the Air Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have: Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended. How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb. The Call to Action You've Been Waiting For So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.
AP Racing Radi-CAL R3 racing brake fluid 617º F boiling point
AP Racing Radi-CAL R3 Racing Brake Fluid (500 ml) $46.00
AP Racing Radi-CAL R3 Racing Brake Fluid Designed for the Top Levels of Motorsports AP Radi-CAL R3 Racing Brake Fluid was developed for use in very-high-temperature racing conditions. It conforms to or exceeds FMVSS 116, DOT 4, SAE J1703 and J1704 standards. AP Racing Radi-CAL R3 Racing Brake Fluid is one of the most popular brake fluids at the highest levels of professional auto and motorcycle racing. It was specifically developed for coping with extraordinary temperatures, such as those encountered when running a carbon/carbon composite brake system. To ensure that the fluid stays fresh, AP brake fluids are furnished in 500 ml (16.9 oz) easy-pour plastic bottles with double-sealed caps. When switching your fluid to AP Racing Radi-CAL R3, we recommend purging all of the old fluid from the system. Three to four bottles of fluid are enough to completely replace existing brake fluid and still have enough left over for a bleed at the track to remove any remaining air bubbles. AP Racing Radi-CAL R3 Brake Fluid Details: Manufacturer: AP Racing Manufacturer part number: AP-CP5660 UPC: 48238040081 DOT Rating: DOT 4 Dry Boiling Point: 617º F / 325º C Wet Boiling Point: 383º F / 195º C Compatible with other DOT 4 fluids: yes Bottle size: 500 ml (16.9 fl oz)
AP Racing Radi-CAL R1 Racing Brake Fluid (500 ml)
AP Racing Radi-CAL R1 Racing Brake Fluid (500 ml) $28.00
AP Racing Radi-CAL R1 Racing Brake Fluid Brake Fluid Suitable for All Forms of Motorsport AP Racing Radi-CAL R1 DOT 4 racing brake fluid was developed for road cars being used in events such as autocross and track days, where drivers need brake fluid with a higher boiling point than that of standard OEM brake fluid. While AP Racing Radi-CAL R1 fluid has the lowest dry boiling point of AP Racing's racing brake fluid lineup at 516º F (269º C), it far exceeds that of ordinary DOT 4 brake fluid. It was developed for applications needing more heat resistance than typical OEM brake fluid. AP Racing Radi-CAL R1 Brake Fluid Details: Manufacturer: AP Racing Conforms to FMVSS 116 DOT3 specification Manufacturer part number: AP-CP7551 New Dry Boiling Point: 516º F / 269º C Wet Boiling Point: 284º F / 140º C Bottle Size: 500 ml (16.9 fl. oz.)
AP Racing Radi-CAL R4 racing brake fluid 644ºF dry boiling point
AP Racing Radi-CAL R4 Racing Brake Fluid (500 ml) $60.00
AP Racing Radi-CAL R4 Racing Brake Fluid Among the Highest Dry Boilings Point On The Market Today AP Racing Radi-CAL R4 racing brake fluid has an ultra-high typical dry boiling point, at 644º F / 340º C. Radi-CAL R4 racing brake fluid has been designed to perform better than any other product at the extremes of heavy-duty braking in top levels of professional racing. AP Racing Radi-CAL R4 has outstanding resistance to vapor lock and pedal fade under the most exacting conditions. A higher vapor lock point means a firmer brake pedal at the extremes of brake temperatures. Enhanced lubricity means R4 is a better lubricant than other market-leading racing brake fluids. This helps extend the life of the metal moving parts in your brake system while increasing system efficiency. Radi-CAL R4 can be mixed with other DOT 3 and DOT 4 racing brake fluid, although for maximum performance your braking system should be thoroughly purged with R4 fluid. AP Racing Radi-Cal Pro R4 Brake Fluid Details: Manufacturer: AP Racing Manufacturer part number: AP-CP7005 DOT rating: DOT 4 Dry Boiling Point: 644º F / 340º C Wet Boiling Point: 383º F / 195º C Bottle Size: 500 ml (16.9 fl. oz.)
Castrol React SRF racing brake fluid 1000ml bottle
Castrol React SRF Synthetic Racing Brake Fluid (1000 ml) from $146.00
Castrol React SRF Racing Brake Fluid Ultra-High Wet Boiling Point Makes Castrol SRF A Standout Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance. The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids! Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications. Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid. Castrol React SRF Racing Brake Fluid Typical Properties: Dry Boiling Point: 590°F (310°C) Wet Boiling Point: 518°F (270°C) Superior anti-vapor lock properties One-liter (1000ml) bottle
Girodisc replacement rotor rings
D2-123 Girodisc Mercedes 360mm Rear Replacement Rings $1,353.00
Girodisc Mercedes Rear Replacement Rings Maintain the stopping power of your Mercedes AMG with Girodisc D2-123 360mm rear replacement rings. These precision-machined rings are designed to bolt directly to your existing Girodisc two-piece rotor hats using the included floating hardware kit, allowing you to refresh the wear surface without replacing the full assembly. Perfect for both street and track use, these rings restore braking consistency and thermal performance. Vehicle Fitment Compatible with:• Mercedes-Benz C63 AMG (W204 / W205 chassis)• Mercedes-Benz E63 AMG (W212 / W213 chassis)• Mercedes-Benz CLS63 AMG (C218 chassis)• Mercedes-Benz S63 AMG (W222 chassis, steel rotor applications)Note: For use with Girodisc 360mm two-piece rear rotor systems only. Not compatible with OEM or carbon-ceramic rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 360mm two-piece rear rotors• CNC-machined from high-carbon cast iron for strength and heat control• Directional curved vanes provide superior cooling under heavy braking• Maintains OEM brake bias and ABS function• Designed exclusively for Girodisc aluminum hats – not compatible with OEM or other brands Specifications • Diameter: 360mm• Position: Rear• Material: High-carbon cast iron• Surface: Plain (non-dimpled/slotted)• Mount type: Floating two-piece system• Includes: Two rings and hardware kit• Sold/priced per pair• MSRP: $880.00 Girodisc D2-123 Replacement Ring FAQs Will these fit OEM Mercedes rotors? No. These are engineered specifically for Girodisc two-piece rotor systems and will not bolt to OEM or carbon-ceramic assemblies. Are both sides included? Yes. Each D2-123 kit includes left and right replacement rings along with all new hardware. Why replace just the rings instead of the full rotor? Replacing only the rings saves cost while maintaining your Girodisc hats and original performance characteristics. Do I need to use the new hardware? Yes. Always install the supplied new hardware for proper fitment, safety, and longevity. Refresh your AMG’s braking system with Girodisc D2-123 360mm rear replacement rings — precision-built for heat management, consistency, and fade-free stopping performance on the road or track.
Girodisc replacement rotor rings
D1-308 Girodisc Mercedes 360mm Front Replacement Rings $1,353.00
D1-308 Girodisc Mercedes 360mm Front Replacement Rings These Girodisc D1-308 front replacement rings are sold in pairs and include new hardware. They are designed to bolt to existing Girodisc aluminum hats only (not compatible with OEM or other hats). Vehicle Fitment Mercedes-AMG GT (C190) 2017+ – Front (for Girodisc 360 mm kits) Design & Performance High-carbon iron rings with 48 curved internal vanes draw cooling air through the rotor. Floating two-piece construction reduces unsprung weight while reusable aluminum hats allow ring-only replacement. Features Replacement rings only; reuse your Girodisc hats Includes new drive pins, spring clips, and Belleville washers High-carbon iron rings with directional internal vanes Slotted face for stable friction and pad cleanup For Girodisc 360 mm front kits on the listed models D1-308 Girodisc Mercedes 360mm Front Replacement Rings FAQs: How do I know these rings match my hats? Verify your hat part number from the original Girodisc kit; D1‑308 mates to 360 mm front hats used in the listed AMG GT applications. What is the minimum thickness? Replace when worn to Girodisc’s stated discard thickness or if cracks reach an edge (inspect regularly for track use). Do I need threadlocker on the hardware? Use the supplied hardware and follow Girodisc torque/spec sheet; do not substitute fasteners. Can I run these with drilled pads or track pads? Yes. Slotted rings are compatible with OEM and aggressive compounds; follow pad bedding procedures. Related Products A1-308 Girodisc Mercedes 360mm Front Rotors A2-148 Girodisc Mercedes 360mm Rear Rotors D1-308 Girodisc Mercedes 360mm Front Replacement Rings D2-123 Girodisc Mercedes 360mm Rear Replacement Rings
Girodisc replacement rotor rings
D2-123DS Girodisc Mercedes 360mm Rear Replacement Rings (Dimpled & Slotted) $1,498.00
Girodisc Mercedes Rear Replacement Rings (Dimpled & Slotted) Upgrade your Mercedes AMG’s braking performance with Girodisc D2-123DS 360mm dimpled and slotted rear replacement rings. Designed as direct-fit replacements for Girodisc two-piece rear rotors, these rings bolt to your existing Girodisc aluminum hats using the included floating hardware kit. The dimpled and slotted design enhances bite, clears debris, and helps maintain consistent braking under extreme conditions. Vehicle Fitment Compatible with:• Mercedes-Benz C63 AMG (W204 / W205 chassis)• Mercedes-Benz E63 AMG (W212 / W213 chassis)• Mercedes-Benz CLS63 AMG (C218 chassis)• Mercedes-Benz S63 AMG (W222 chassis, steel rotor applications)Note: For vehicles equipped with Girodisc 360mm two-piece rear rotors. Not for OEM or carbon-ceramic systems. Features • Sold as a left/right pair and includes new floating hardware kit• Dimpled and slotted surface increases pad bite and gas evacuation• CNC-machined from high-carbon cast iron for superior heat control• Curved directional vanes provide maximum cooling under load• Maintains OEM brake bias and ABS function• Designed exclusively for Girodisc aluminum hats – not compatible with OEM or other brands Specifications • Diameter: 360mm• Position: Rear• Material: High-carbon cast iron• Surface: Dimpled and slotted• Mount type: Floating two-piece system• Includes: Two rings and full hardware kit• Sold/priced per pair• MSRP: $980.00 Girodisc D2-123DS Replacement Ring FAQs Will these fit OEM Mercedes rotors? No. These are engineered for Girodisc two-piece rotor systems and will not fit factory or carbon-ceramic setups. What’s the advantage of the dimpled and slotted design? It improves initial pad bite, helps vent gases, and maintains a cleaner braking surface for consistent stopping power. Are both sides included? Yes. Each D2-123DS kit includes left and right replacement rings plus a complete hardware kit. Do I need to replace the hardware? Yes. Each kit includes new floating hardware that must be used for proper installation and long-term reliability. Enhance your AMG’s braking response with Girodisc D2-123DS 360mm rear replacement rings — the ideal blend of precision, durability, and cooling performance for the street or track.
Girodisc replacement rotor rings
D1-308DS Girodisc Mercedes 360mm Front Replacement Rings (Dimpled & Slotted) $1,498.00
D1-308DS Girodisc Mercedes 360mm Front Replacement Rings (Dimpled & Slotted) These Girodisc D1-308DS front replacement rings are sold in pairs and include replacement hardware. They are designed for use with existing Girodisc aluminum hats and are not compatible with OEM or other aftermarket hats. Vehicle Fitment Mercedes models with Girodisc 360 mm front rotor kits Not for 370 / 380 / 390 mm systems Refresh Your Two-Piece Rotor Setup Dimpled and slotted high-carbon iron rings deliver strong initial pad bite and stable performance under heat. Reusing your Girodisc hats keeps service costs down while maintaining braking performance. Features Replacement rings only; reuse Girodisc aluminum hats Sold in pairs with replacement hardware Dimpled & slotted surface for bite and gas evacuation High-carbon iron with 48 curved vanes for cooling Cost-effective rotor refresh solution D1-308DS Girodisc Mercedes 360mm Front Replacement Rings FAQs: Do these include hats? No, these are rings only and require existing Girodisc hats. Are they sold individually? No, they are sold as a pair. Can I use OEM hats? No, these rings are only compatible with Girodisc hats. Are these track-ready? Yes, they offer excellent cooling and bite for performance driving.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-308 Girodisc Mercedes 360mm Front Rotors $2,037.00
A1-308 Girodisc Mercedes 360mm Front Rotors These Girodisc A1-308 2-piece slotted front rotors are a direct OEM replacement for 360 mm front discs on select Mercedes-AMG models. Bolt-on fit with stock calipers; no modifications required. Vehicle Fitment Mercedes-Benz E63 AMG (W212) 2010–2014 – Front (360 mm) Design & Performance High-carbon iron rings with 48 curved internal vanes draw cooling air through the rotor. Floating two-piece construction reduces unsprung weight while reusable aluminum hats allow ring-only replacement. Features Direct OEM replacement (360 mm) for listed AMG applications 2-piece floating rotor reduces unsprung weight vs. OE Slotted face improves pad refresh and debris evacuation High-carbon iron rings; reusable 6061‑T6 aluminum hats Approx. 23.6 lb per rotor vs. ~34.5 lb OE (application dependent) Manufactured and assembled in Bellingham, WA A1-308 Girodisc Mercedes 360mm Front Rotors FAQs: Do these rotors require new calipers or brackets? No. They bolt to the factory hubs and work with OEM calipers and pads on the listed applications. Are they directional? Yes. Each rotor has directional internal vanes; install left/right as marked to ensure proper airflow. What pads are recommended? They are compatible with OEM pads and popular street/track compounds (e.g., Ferodo DS1.11, Pagid, Hawk). Bed-in per the pad manufacturer. How do they compare to OE one-piece discs? Lower rotating mass and better heat rejection reduce fade and can improve response on track. Related Products A1-308 Girodisc Mercedes 360mm Front Rotors A2-148 Girodisc Mercedes 360mm Rear Rotors D1-308 Girodisc Mercedes 360mm Front Replacement Rings D2-123 Girodisc Mercedes 360mm Rear Replacement Rings
GiroDisc brake rotor with curved grooves, representative image for A1-447
A2-148 Girodisc Mercedes 360mm Rear Rotors $2,182.00
A2-148 Girodisc Mercedes 360mm Rear Rotors These Girodisc A2-148 2-piece slotted rear rotors directly replace factory 360 mm rear discs on select AMG models listed below. Lighter hats and a floating design improve cooling and serviceability. Vehicle Fitment Mercedes-AMG GT / GT S / GT C / GT R (C190) 2016–2021 – Rear (360 mm) Mercedes-AMG GT 4-Door (X290) 2019–2021 – Rear (360 mm) Mercedes-Benz S63 / S65 AMG (W222) 2014–2020 – Rear (non-CCB) Mercedes-Benz SL63 / SL65 AMG (R231) 2012–2017 – Rear (non-CCB) Mercedes-AMG C63 / C63 S (W205) 2015–2019 – Rear (360 mm) Design & Performance High-carbon iron rings with 48 curved internal vanes draw cooling air through the rotor. Floating two-piece construction reduces unsprung weight while reusable aluminum hats allow ring-only replacement. Features Direct OEM replacement (360 mm) for listed rear applications Slotted face pattern for consistent bite and pad deglazing Floating 2-piece construction reduces heat transfer to hubs High-carbon iron rings with reusable aluminum hats 8–12 lb per-axle weight savings vs. OE (model dependent) No brake bias changes; ABS and stability systems remain stock A2-148 Girodisc Mercedes 360mm Rear Rotors FAQs: Will these work with carbon-ceramic packages? No. These rotors are for iron-brake cars only; models with CCB must use CCB-specific components. Do I need to code or recalibrate anything? No coding required. The rotor dimensions match OEM spec for the listed vehicles. Can I replace just the rings later? Yes. Use D2-123 or the correct rear ring kit specified for your hat/kit. Are parking brake shoes affected? No. The rotor hat retains the OEM drum parking brake interface.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-308DS Girodisc Mercedes 360mm Front Rotors (Dimpled & Slotted) $2,182.00
A1-308DS Girodisc Mercedes 360mm Front Rotors (Dimpled & Slotted) These Girodisc A1-308DS 2-piece dimpled and slotted front rotors are a direct replacement for factory 360 mm front rotors on Mercedes performance models. The floating two-piece design reduces unsprung weight and improves cooling, while the surface pattern enhances pad bite and gas evacuation. Vehicle Fitment Mercedes-AMG / Mercedes models using 360 mm front rotors Factory OEM 360 mm brake systems on select AMG / performance models High-Performance Dimpled & Slotted Design The 48 curved vane internal structure pulls cooling air through the rotor like a centrifugal pump. Combined with high-carbon iron rings and reusable aluminum hats, this design delivers excellent thermal stability and cost-effective service. Features Direct OEM replacement for 360 mm front rotors Dimpled & slotted rotor surface improves bite and pad cleaning 2-piece floating rotor design reduces unsprung weight High-carbon iron rings with reusable aluminum hats 48 curved vanes for outstanding cooling Manufactured and assembled in Bellingham, WA A1-308DS Girodisc Mercedes 360mm Front Rotors FAQs: Are these a direct fit? Yes, they bolt to factory hubs and work with OEM calipers. Do they work with OEM pads? Yes, and they are compatible with performance pad compounds. Can I replace just the rings later? Yes, reuse the hats with D1-308DS replacement rings. Why dimpled & slotted instead of drilled? The pattern improves bite and gas evacuation while minimizing cracking risk versus fully drilled rotors.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A2-148DS Girodisc Mercedes 360mm Rear Rotors (Dimpled & Slotted) $2,327.00
A2-148DS Girodisc Mercedes 360mm Rear Rotors (Dimpled & Slotted) These Girodisc A2-148DS 2-piece dimpled and slotted rear rotors are a direct replacement for factory 360 mm rear rotors on Mercedes performance models. They reduce unsprung weight, enhance cooling, and provide improved pad bite while maintaining street-friendly refinement. Vehicle Fitment Mercedes models matched with 360 mm front / rear rotor setups Performance / AMG systems specifying 360 mm rear rotors Track-Ready Performance with Street Manners High-carbon iron rings paired with reusable aluminum hats deliver strong thermal stability and cost-effective service. The 48 curved vane internal structure promotes airflow and heat management during repeated braking events. Features Direct OEM replacement for 360 mm rear rotors Dimpled & slotted surface for improved bite and pad cleaning 2-piece floating design reduces unsprung weight High-carbon iron rings with reusable aluminum hats 48 curved vanes for efficient cooling Manufactured and assembled in Bellingham, WA A2-148DS Girodisc Mercedes 360mm Rear Rotors FAQs: Do these fit stock calipers? Yes, they are a direct bolt-on with OEM calipers. Are they noisy? No, the floating hardware is engineered for quiet street operation. Can I replace the rings only? Yes, reuse your Girodisc hats with the appropriate rear replacement rings when available. Are they track-capable? Yes, they are designed for repeated heat cycles and performance use.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa