Evo X (2008-16)

Girodisc Mitsubishi Evo X Rear Rotors Enhance the braking performance of your Evo X with Girodisc’s lightweight two-piece rear rotors. Designed to bolt directly to your factory calipers, these precision-engineered rotors reduce unsprung mass, improve cooling, and deliver consistent stopping power for both spirited street driving and aggressive track use. Vehicle Fitment Mitsubishi Lancer Evolution X (2008–2015)Direct OEM replacement – no modifications requiredCompatible with factory calipers and hardware Precision Engineering, Race-Proven Performance The Girodisc system replaces the factory cast rotor with a fully rebuildable two-piece floating assembly. Each rotor features a CNC-machined 6061-T6 aluminum hat and Girodisc’s proprietary cast-iron friction ring, both manufactured in the USA. The curved internal vane design acts as a centrifugal pump to draw air through the rotor, keeping temperatures stable under heavy braking. This design maintains factory ABS function and brake bias while improving overall responsiveness and rotor longevity. Features • Direct OEM replacement – bolts to factory hubs• 6061-T6 billet aluminum hats, machined and anodized in the USA• Proprietary cast-iron friction rings with racing-grade metallurgy• Floating mount design with cadmium-plated steel drive pins• Anti-noise spring washers allow expansion and prevent rattle• Curved internal vanes maximize airflow and heat dissipation• Reduces unsprung and rotational mass for better handling• Maintains OEM brake balance and ABS calibration• Fully rebuildable – replace only rotor rings when needed• Sold/priced per pair Girodisc A2-047 Rear Rotor FAQs: Are these a direct fit for the Evo X? Yes. They bolt directly to the OEM hubs and work perfectly with factory calipers—no modifications or adapters required. What’s the advantage of Girodisc rotors? They’re lighter than OEM rotors, improving suspension response and heat control for more consistent braking performance. Are they suitable for track use? Absolutely. Girodisc rotors are engineered for high-temperature endurance, making them ideal for performance driving and competitive use. Do I need special pad

Mitsubishi Evo X Front Rotors Upgrade your Evo X braking system with Girodisc’s two-piece floating front rotors—precision-built to outperform factory discs while maintaining perfect OEM fitment. Designed to reduce unsprung and rotational mass, these rotors improve acceleration, suspension response, and braking consistency under high-performance conditions. Engineered for Lightweight Strength The Girodisc system bolts directly to your OEM calipers with no modifications required. Each rotor features a U.S.-sourced 6061-T6 aluminum hat mated to a proprietary cast iron disc, machined and assembled in-house for exceptional quality. The curved vane design promotes efficient cooling, keeping temperatures stable during repeated hard stops—perfect for both street and track use. Vehicle Fitment • 2008–2015 Mitsubishi Lancer Evolution X (All trims with Brembo front calipers) Girodisc A1-047 Features • Direct bolt-on replacement for OEM rotors• Two-piece floating design for reduced weight and improved cooling• 6061-T6 aluminum hats made in the USA• Proprietary cast iron with curved internal vanes• Floating mount system with anti-noise spring washers• Enhanced response, braking stability, and durability• Sold/priced per pair Mitsubishi Evo X Front Rotor FAQs: Are these compatible with the factory Brembo calipers? Yes, they are a direct replacement for the OEM rotors and work perfectly with factory Brembos. Do these reduce brake fade? Absolutely. The curved vane design and floating mount system improve heat dissipation and reduce fade during hard use. Are replacement rings available? Yes, you can replace just the iron rings and reuse the aluminum hats to save money over time. Are these rotors street-friendly? Yes, Girodisc rotors are designed to perform quietly and smoothly both on the street and track. Enhance your Evo X’s braking confidence with Girodisc—engineered for precision, performance, and reliability under every driving condition.

Pagid Racing Brake Pad Shape 2931 Fitment Guide for Pagid 2931 Brake Pad (FMSI D1029) Make Model Build (Year) Front Rear Audi R8 4.2 and 5.2 FSI quattro 07 - 15 X Audi R8 5.2 RWS (2nd generation) 18 - X Audi RS3 Sportback [8VA] 15 - X Audi RS4 quattro [B7] 05 - 08 X Audi RS5 (8TR) 10 - 15 X Audi RS6 (C5) 02 - 04 X Audi TT RS 2.5 Quattro [FV3] 16 - X Lamborghini Gallardo 04 - 13 X Lamborghini Huracán [iron rotors] 14 - X Mitsubishi EVO X R4 / Super Gr. N Tarmac Spec. 15 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

D1-047 Girodisc Front Rotor Rings Keep your braking system in peak condition with Girodisc D1-047 350x32mm front replacement rings. These precision-machined rotors are direct replacements for Girodisc’s two-piece assemblies and bolt to your existing aluminum hats using the included floating hardware kit. Each rotor is cast from Girodisc’s proprietary high-carbon iron alloy, delivering superior heat control, fade resistance, and consistent performance under repeated high-load braking. Vehicle Fitment Universal fit for performance vehicles utilizing Girodisc 350x32mm two-piece front rotor systems, including:• Custom Brembo GT, AP Racing, and StopTech big brake conversions• Track-prepared cars with 350mm iron rotor setupsNote: These rings are for Girodisc aluminum hats only and are not compatible with OEM one-piece or carbon-ceramic rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 350x32mm two-piece front rotors• CNC-machined from high-carbon cast iron for superior thermal capacity• Directional curved vanes promote airflow for improved cooling• Maintains brake balance and ABS function when paired with Girodisc systems• Precision-balanced to eliminate vibration• Designed for track, competition, and high-performance street use Specifications • Diameter: 350 mm• Thickness: 32 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and full hardware kit• Sold/priced per pair D1-047 Girodisc 350x32mm Front Ring FAQs Do these fit OEM rotor hats? No. These are designed only for Girodisc aluminum hats and are not compatible with OEM cast or carbon-ceramic assemblies. Which brake pads are recommended? For street and performance driving, Ferodo DS2500 or Hawk HPS 5.0 are ideal. For heavy track use, Pagid RS29 or Carbotech XP10 pads provide optimal bite and temperature stability. Do these need to be bedded in? Yes. Perform 8–10 moderate stops from 60 mph to evenly transfer pad material to the rotor surface and ensure consistent friction performance. What torque should be used on the mounting bolts? Torque each bolt to 12 ft-lbs (16 Nm) with blue Loctite. Recheck after one heat cycle for proper float and secure installation. Renew your braking system’s precision and power with Girodisc D1-047 350x32mm front replacement rings — engineered for control, cooling, and reliability on street or circuit.

Girodisc Mitsubishi Evo X Rear Rings Restore precision braking on your Mitsubishi Evo X with Girodisc D2-047 330mm rear replacement rings. Designed as direct-fit replacements for Girodisc two-piece rotors, these rings bolt to your existing aluminum hats using the included floating hardware kit. Refresh the wear surface without replacing the entire assembly, keeping your Evo’s braking system light, responsive, and track-ready. Vehicle Fitment Compatible with:• Mitsubishi Lancer Evolution X (2008–2015, rear)Note: For vehicles equipped with Girodisc 330 mm two-piece rear rotor systems. Not compatible with OEM or carbon-ceramic rotors. Girodisc D2-047 Features • Sold as a left/right pair with full floating hardware kit• Direct replacements for Girodisc 330 mm two-piece rear rotors• CNC-machined from proprietary high-carbon cast iron for heat stability• Directional curved vanes enhance airflow and reduce fade• Maintains factory brake bias and ABS calibration• Designed exclusively for Girodisc aluminum hats – not compatible with OEM or other brands Specifications • Diameter: 330 mm• Position: Rear• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rings and new hardware kit• Sold/priced per pair Girodisc D2-047 Evo X Rear Replacement Ring FAQs Do these fit the stock Evo X rotors? No. These are engineered for Girodisc two-piece rotor hats and won’t fit factory one-piece rotors. Are these compatible with OEM Brembo calipers? Yes. They are a direct fit with the factory Brembo calipers when used with Girodisc hats. Can I use aggressive track pads with these rings? Absolutely. The high-carbon alloy resists cracking and heat distortion under demanding race or time-attack conditions. How much weight do these save over OEM rotors? The two-piece Girodisc system typically saves 4–6 lbs per corner, reducing unsprung mass and improving suspension response. Upgrade your Mitsubishi Evo X with Girodisc D2-047 330 mm rear replacement rings — precision-built for fade-free performance, lighter weight, and superior thermal control on both street and circuit.

Pagid Racing Brake Pad Shape 2487 Fitment Guide Pagid 2487 Brake Pad (FMSI 2487) Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z51 14 - X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Mustang Boss 302 12 - 13 X Ford Mustang GT [4 piston Brembo] 11 - 14 X Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc] 07 - 14 X Honda Civic Type R [Brembo brakes] Gen IX and X 15 - X Hyundai Genesis Coupe 3.8 track 10 - 16 X KIA Stinger 3.3 T-GDI V6 [4 piston Brembo] 18- X Maserati Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm] 13 - X Mitsubishi Lancer Evo V - Evo IX 98 - 06 X Mitsubishi Lancer Evo X 07 - 16 X Subaru STI 3rd & 4th generation 03 - 16 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 2487 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 2487 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 2487 Brake Pad RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid Racing 2487 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid Racing 2487 Brake Pad RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Racing Technologies P1012 Brake Pads (Front) Fitment Guide Racing Technologies P1012 Brake Pad (FMSI 2487) Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C7 base 13 - 19 X Chevrolet Corvette C7 Z51 14 - 19 X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Mustang Boss 302 12 - 13 X Ford Mustang GT [4 piston Brembo] 11 - 14 X Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc] 07 - 14 X Honda Civic Type R [Brembo brakes] Gen IX and X 15 - X Hyundai Genesis Coupe 3.8 track 10 - 16 X KIA Stinger 3.3 T-GDI V6 [4 piston Brembo] 18- X Maserati Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm] 13 - X Mitsubishi Lancer Evo V - Evo IX 98 - 06 X Mitsubishi Lancer Evo X 07 - 16 X Subaru STI 3rd & 4th generation 03 - 16 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487   The Race Technologies P1012 brake pad is a performance-focused pad shape engineered for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth and 15 mm pad thickness, the P1012 features a distinctive backing plate profile and curved friction surface designed for demanding braking applications. Competition Motorsport offers the Race Technologies P1012 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for a track weekend or competitive racing, choosing the correct pad shape and compound is essential for predictable, consistent braking performance. Race Technologies P1012 Brake Pad Specifications Pad Shape: P1012 Overall Width: 132 mm Overall Height: 77 mm Friction Material Depth: 62 mm Pad Thickness: 15 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound The P1012 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its specialized mounting geometry makes accurate shape identification important when replacing existing brake pads or selecting friction materials for compatible performance calipers. Always compare the P1012 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 provides a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking performance across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1012 compound depends on the vehicle's intended use and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1012 Brake Pads? The Race Technologies P1012 combines a 132 mm overall width with a 77 mm height, 62 mm friction material depth, and 15 mm thickness. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible high-performance braking systems. Distinctive Race Technologies P1012 backing plate geometry 132 mm overall width and 77 mm overall height 62 mm friction material depth 15 mm nominal pad thickness Choice of RE10 racing or TS20 street/track compounds Race Technologies P1012 Brake Pad Fitment The Race Technologies P1012 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, 15 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1012 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1012 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.

Pagid Racing Brake Pad Shape 8069 Pagid 8069 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Mitsubishi Lancer Evo X 2007 - 16 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo hp 2 piston 84.7x70 17mm 8069 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RS 42 Compound RS 42 is a low metallic resin bonded material containing steel and aramid fibers. The characteristics make this material appropriate for small formula cars. Pagid RS 42 is regarded as a classic rally racing brake pad compound, as well as being very popular in small formula and touring cars.

Race Technologies P1013 Brake Pads (Rear) Fitment Guide Race Technologies P1013 / 1404 Brake Pad (FMSI 2487)Fits the Following Calipers: Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin DB11 [cast iron brakes] 16 - 23 X Aston Martin Vantage [cast iron brakes] street car 18 - X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z51 14 - X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Ford GT (second generation) ceramic brakes 17 - X Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487   The Race Technologies P1013 brake pad features a distinctive wide-format backing plate designed for compatible high-performance brake calipers. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth, the P1013 combines a curved friction surface with two angled friction grooves and specialized mounting features for demanding performance driving and motorsport applications. Competition Motorsport offers the Race Technologies P1013 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, selecting the correct pad shape and compound is essential for proper fitment and predictable braking performance. Race Technologies P1013 Brake Pad Specifications Pad Shape: P1013 / 1404 Overall Width: 132 mm Overall Height: 77 mm Friction Material Depth: 62 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1013 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers. Always compare the P1013 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1013 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1013 Brake Pads? The Race Technologies P1013 combines a 132 mm overall width with a 77 mm height and 62 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems. Distinctive Race Technologies P1013 backing plate geometry 132 mm overall width and 77 mm overall height 62 mm friction material depth Two angled friction grooves shown in the technical drawing Choice of RE10 racing or TS20 street/track compounds Race Technologies P1013 Brake Pad Fitment The Race Technologies P1013 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1013 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1013 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.

Race Technologies P1013 Brake Pads (Front) Fitment Guide Race Technologies P1013 / 1404 Brake Pad (FMSI 2487) Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z51 14 - X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Mustang Boss 302 12 - 13 X Ford Mustang GT [4 piston Brembo] 11 - 14 X Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc] 07 - 14 X Honda Civic Type R [Brembo brakes] Gen IX and X 15 - X Hyundai Genesis Coupe 3.8 track 10 - 16 X KIA Stinger 3.3 T-GDI V6 [4 piston Brembo] 18- X Maserati Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm] 13 - X Mitsubishi Lancer Evo V - Evo IX 98 - 06 X Mitsubishi Lancer Evo X 07 - 16 X Subaru STI 3rd & 4th generation 03 - 16 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487   The Race Technologies P1013 brake pad features a distinctive wide-format backing plate designed for compatible high-performance brake calipers. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth, the P1013 combines a curved friction surface with two angled friction grooves and specialized mounting features for demanding performance driving and motorsport applications. Competition Motorsport offers the Race Technologies P1013 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, selecting the correct pad shape and compound is essential for proper fitment and predictable braking performance. Race Technologies P1013 Brake Pad Specifications Pad Shape: P1013 / 1404 Overall Width: 132 mm Overall Height: 77 mm Friction Material Depth: 62 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1013 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers. Always compare the P1013 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1013 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1013 Brake Pads? The Race Technologies P1013 combines a 132 mm overall width with a 77 mm height and 62 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems. Distinctive Race Technologies P1013 backing plate geometry 132 mm overall width and 77 mm overall height 62 mm friction material depth Two angled friction grooves shown in the technical drawing Choice of RE10 racing or TS20 street/track compounds Race Technologies P1013 Brake Pad Fitment The Race Technologies P1013 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1013 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1013 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.