Porsche 997

COBB Tuning Accessport V3 for Porsche 997.2 Carrera S/4S/GTS/4 GTS The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.2. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need! Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime. OFF THE SHELF MAPS AND POWER GAINS With the release of tuning support for the 997.2 Carrera S/GTS, owners are able to enjoy an increase in overall power and smoother power delivery.  The following Off The Shelf Maps are available for supported vehicles: Stage 0 v101 Stage 1 91 v101 Stage 1 93 v101 Stage 1 100 v101 The Stage 0 OTS map is simply the factory calibration data. The Stage 1 OTS maps are intended for vehicles in an otherwise stock mechanical configuration.  An upgraded cat-back exhaust/mufflers will be fine and will not cause any issues. Below are dyno graphs representing pulls using the included Stage 1 OTS maps for both 91 and 93 octane fuels. As you can see, both maps provide gains in power and torque across the board. The Stage 1 100 map will produce an additional 4-5 peak horsepower. The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need. SUPPORTED VEHICLES: 2009-2012 Porsche Carrera S (997.2) MT WM 2009-2012 Porsche Carrera S (997.2) PDK WM 2009-2012 Porsche Carrera 4S (997.2) MT WM 2009-2012 Porsche Carrera 4S (997.2) PDK WM 2011-2012 Porsche Carrera GTS (997.2) MT WM 2011-2012 Porsche Carrera GTS (997.2) PDK WM 2011-2012 Porsche Carrera 4GTS (997.2) MT WM 2011-2012 Porsche Carrera 4GTS (997.2) PDK WM

COBB Tuning Accessport V3 for 997.2 Turbo/Turbo S The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.2 Turbo and Turbo S. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need! Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.  Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions. Stage 1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust. Stage 2 maps are designed for a high-flow exhaust/cats and an upgraded intake like the IPD Intake Plenum and Y-Pipe. Stage 3 maps designed for a high-flow exhaust, thicker core intercoolers, upgraded IPD intake, and COBB 3BAR MAP/PUT Sensors. The Stage 3 map includes tuning for 100-octane racing fuel for when you absolutely, positively must go faster. We recommend using Race Gas to chemically reformulate pump gas to match 100-octane race fuel. (We use Race Gas at the track in our race cars.) There's also a valet mode that limits RPM to 4,000, and an anti-theft mode that prevents the vehicle from starting. The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need. SUPPORTED VEHICLES: 2010-2013 Porsche 911 (997.2) Turbo PDK 2010-2013 Porsche 911 (997.2) Turbo S PDK FEATURES: Large, full color, higher resolution screen Customizable multi-gauge display In vehicle mount, with on/off switch User-customizable start-up screen Interchangeable faceplates

COBB Tuning Accessport V3 for Porsche 997.1 Turbo/GT2 The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for all turbocharged Porsche 997.1 Turbo and GT2. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need! Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.   Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions. Stage 1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust. Stage 2 maps are designed for a high-flow exhaust and cats with an otherwise-stock engine, etc. Stage 3 1000 maps designed for a high-flow exhaust, thicker core intercoolers, and COBB 1000-cc injectors. Stage 3 1300 maps designed for a high-flow exhaust, thicker core intercoolers, and COBB 1300-cc injectors. Each stage map enables brake boosting for two seconds. This allows you to floor the gas with your foot on the brake to build boost. The timer on the sport button has also been raised to 30 seconds so you can use the overboost feature longer. There's also a valet mode that limits RPM to 4,000, and an anti-theft mode that prevents the vehicle from starting. The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need. SUPPORTED VEHICLES: 2007-2009 Porsche 911 (997.1) Turbo AT, MT 2008-2009 Porsche 911 (997.1) GT2 MT 2011 Porsche 911 (997.1) GT2 RS MT FEATURES: Large, full color, higher resolution screen Customizable multi-gauge display In vehicle mount, with on/off switch User-customizable start-up screen Interchangeable faceplates 

COBB Tuning Accessport V3 for Porsche 997.1 GT3 & GT3RS The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.1 GT3 and GT3RS. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need! Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime. Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions. Stage1 maps are designed for a stock engine and intake, with either stock exhaust or muffler bypass. Stage 2 maps are designed for full aftermarket exhaust (Cup car headers can be used), with an otherwise stock engine. Left-foot braking is enabled (a major reason to get the COBB Stage 2 tune). Rev limit is raised to 8,550 RPM. There is also a valet-mode (rev limit of 4,000 RPM) and an anti-theft mode that will not allow the engine to start. COBB has even provided a 100-octane map that takes maximum advantage of using high-octane racing fuel. We have had incredible success using Race Gas in our race cars to chemically reformulate pump gas into real 100-octane racing fuel. The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need. SUPPORTED VEHICLES: 2007-2008 Porsche 911 (997.1) GT3 MT 2007-2008 Porsche 911 (997.1) GT3 RS MT FEATURES: Large, full color, higher resolution screen Customizable multi-gauge display In vehicle mount, with on/off switch User-customizable start-up screen Interchangeable faceplates

COBB Tuning Accessport V3 for Porsche 997.2 GT3 & GT3RS The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 997.2 GT3 and GT3RS. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Plus, easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need! Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime.  Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions. STAGE 1 MAPS Stage1 maps are designed for a stock engine configuration. Left-foot braking is enabled (a major reason to get the COBB tune). The rev limiter is raised to 8,650 RPM in all Stage 1 calibrations. (ACN91 is for Arizona/California gas formulations.) There is also a valet-mode (rev limit of 4,000 RPM) and an anti-theft mode that will not allow the engine to start. The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need. SUPPORTED VEHICLES: 2010-2011 Porsche 911 (997.2) GT3 MT 2010-2011 Porsche 911 (997.2) GT3 RS MT 2011 Porsche 911 (997.2) GT3 RS 4.0 MT FEATURES: Large, full color, higher resolution screen Customizable multi-gauge display In vehicle mount, with on/off switch User-customizable start-up screen Interchangeable faceplates