BMW E46 M3

CMS Performance RF1 DOT4 Racing Brake Fluid Real-Life High Boiling Point Without The Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid. RF1 Racing Brake Fluid Details: Typical dry boiling point: 328º C (622º F) Typical wet boiling point: 204º C (399º F) Exceeds DOT3 & DOT4 standards Bottle size: 500 ml (16.9 fl oz) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Girodisc Brake Pad Spreader This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Insert the spreading plates one way for wider six-piston calipers, then turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. The Girodisc Brake Pad Spreader will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.

Performance Friction PFC Brake Pads 0394.XX.20.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  The PFC 0394.11.16.44 and PFC 0394.08.18.44 have dominated the NASA Spec E46 class since inception. The PFC 0394 pad shape fits the front axle of the E46 non-M, M3 chassis and comes in three popular compounds, the 08, 11 and brand new 332. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC 331 Compound 331 is the next generation of PFC endurance material. Improved control with ABS, and gentle on discs. The 331 Carbon Metallic ® compound has been developed with higher initial bite than PFC’s renowned 08 endurance compound. The 331 has improved release, and continues to offer exceptional control and feel. It boasts low wear rate and exceptional disc conditioning. 0394.xx.20.44 FITS: BMW 120d / 130i 2006-12 E81 / E87 BMW M3 incl Evo 1992-99 E36 E36-M3 BMW 330i 2000-06 E46 E46-330i BMW M3 incl CSL 2000-06 E46 E46-M3 BMW 330d / 330i 2008- E92 E92-330i BMW 5 Series 1988-95 E34 incl M5 BMW 5 Series 1995- E39 (not M5) BMW 6 Series 1982-89 E24 BMW Z3 Z3M 1992-99 E36 BMW Z3 3.2 litre 1997- Coupé / Roadster BMW Z4M 2006- E85 M Roadster & Coupé

0396.11.17.44 (11 Compound) A new generation sprint and medium distance friction compound, offering the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of a stop while giving more cold and hot bite than the endurance-oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. 0396.08.17.44 (08 Compound) One of PFC's most popular compounds, the 08 came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' endurance materials but with much higher bite and more consistent performance across a broad temperature range. 0396.332.17.44 (332 Compound) 332 has been formulated with lower bite and torque for rear applications.  With smooth release, the 332 offers excellent stability and control.  The 332 has been designed to work with ABS applications, and has exceptionally low wear rates FITS: BMW E30 M3 BMW E36 M3 BMW E46 M3

    Fits These Vehicles: Make Model Build (Year) Front Rear Alfa Romeo 156 2.0 16V 95 - 98 X   BMW 120d & 130i [E81 & E87] 03 - 12 X   BMW 330i [E46] 00 - 05 X   BMW M3 [E36] 3.0 & 3.2 92 - 99 X   BMW M3 [E46] & M3 CSL 00 - 07 X   BMW M5 [E34] 88 - 97 X   BMW Z3 M Roadster 3.2i 97 - 03 X   BMW Z4 M Coupe 06 - X     RS 14:   The PAGID RS14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying.   RST 1: PAGID RST1 is a high average friction, aggressive pad with instant pedal response, quick release, a firm pedal at all temperatures, and a progressive torque curve. Suitable for applications with high down-force and/or very high grip.  RSL 1:  PAGID RSL1 is a complex formulation of ceramic materials. Compared to metallic compounds, it has superior thermal insulation and higher heat resistance. It is a medium-friction compound that is rotor friendly and was designed to meet the latest ecological standards in endurance racing.    

  Make Model Build (Year) Front Rear BMW 330i [E46] 00 - 05   X BMW 850 [E31] 90 - 99   X BMW M3 [E46] & M3 CSL 00 - 07   X BMW M5 [E39] 98 - 03   X BMW X5 4.4 00 -   X BMW Z4 M Coupe 06 -   X BMW Z8 4.9 00 - 03   X Maserati BiTurbo 2.5 & 2.8 94 - 99   X   RSL 29: The PAGID RS29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.   RSL1: PAGID RSL1 has a high ceramic content with superior thermal insulation and higher heat resistance than metallic pad compounds. They feature excellent pad wear under endurance conditions, excellent rotor life, and are less aggressive than RST pads with excellent brake balance and modulation. RST 3: Pagid RST brake pads were developed exclusively for use in Sprint Racing and Rally competition, with high average friction, aggressive instop behavior and instand pedal response.  They feature a consistantly firm brake pedal at all temperatures and are fade resistant at even the highest brake disc temperatures. The RST3 pads offer a medium friction metal-ceramic type compound with good initial bite and still excellent modulation and release characteristics.  Medium torque, fade resistant up to 800 degrees celcius, and the lowest heat conductivity in the RST range.