Auto Racing Helmets

Stilo Helmets ST5 FN ABP ZERO 8860-2018 Carbon Helmet The Advanced Ballistic Protection (ABP) features reinforced areas above the visor opening, which is 10mm lower than non-ABP models. In short, this is the highest specification helmet ever developed. The Stilo ST5 FN ABP Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection and impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo ST5 FN ABP Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the integrated side ports of the Stilo Helmets ST5 GT 8860-2018 carbon helmet, it can still be outfitted with top forced air and a helmet eject system. The innovative design incorporates mounting and routing for these options at the time of manufacture, so integration is sleek and seamless with nothing hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo Helmets ST5 N Zero 8860-2018 has a taller, lower-set eye port, giving you better visibility while not compromising safety. Stilo visors use a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.   FEATURES: FIA 8860-2018 certified Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL All ST5 shields are interchangeable across all ST5 helmets Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Stilo ZERO shells are the lightest FIA 8860-2018 helmets available WEIGHT: Small shell: 930g / 2.1 lbs up to size L (59) Large shell: 1.23kg / 2.7 lbs up to size 3XL (64) For the GT version of this helmet (includes integrated side ports), please see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Fiber Helmet. This helmet will require a signature for delivery. Measuring Your Head: An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.

  Stilo ST5 GT Zero 8860-2018 Carbon Helmet The Stilo Helmets ST5 GT Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo Helmets ST5 GT Zero 8860-2018 carbon helmet is the lightest-weight carbon fiber racing helmet on the market (weight listed below). It has two integrated side ports each of which can accommodate electronics, forced air, helmet eject system, or a hydration system. This innovative design incorporates mounting and routing for these options into the helmet shell, so integration is sleek and seamless. When not in use, you don't even know the side ports are there. For the "Naked" version of this helmet (without side ports), please see the Stilo Helmets ST5 N Zero 8860-2018 Carbon Fiber Helmet. INCREASED VISIBILITY The Stilo ST5 GT Zero 8860-2018 carbon fiber helmet has a taller, lower eyeport giving you better visibility without compromising your safety. Each visor has a center pinch-clip so opening and closing are easy even while wearing Nomex racing gloves.   We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES: FIA 8860-2018 certified All ST5 shields are interchangeable across all ST5 helmets Includes standard HANS post anchors Includes Stilo Helmet Bag Plus HANS for your helmet and HNR Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous helmets Stilo ZERO shells are the lightest FIA 8860-2018 helmets available WEIGHT (including intercom): Small Shell: 1130g / 2.5 lbs up to size L (59) Large Shell: 1230g / 2.7 lbs up to size 3XL (64) This helmet will ship to you with signature required for delivery. Measuring Your Head: An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.  

Stilo Helmets ST5 FN Zero 8860-2018 Carbon Helmet The Stilo Helmets ST5 FN Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere. The Stilo ST5 FN Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 carbon helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to the innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless with nothing protruding from the helmet, hanging down or otherwise getting in the way. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo ST5 FN Zero 8860-2018 has a taller, lower eye port giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES: FIA 8860-2018 certified Includes standard HANS post anchors Includes Stilo Helmet & HNR bag Sizing from XS through 3XL ST5 shields are now interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Redesigned cheek pads are more contoured and comfortable than previous designs Stilo ZERO shells are the lightest FIA 8860-2018 helmets available WEIGHT (INCLUDING COMM SYSTEM): Small Shell: 1130g / 2.5 lbs up to size L(59) Large Shell: 1230g / 2.7 lbs up to size 3XL (64)   For the GT version of this helmet (includes integrated side ports), please see the Stilo ST5 GT Zero 8860-2018 Carbon Fiber Helmet. This helmet will require a signature for delivery. Measuring Your Head: An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.

Bell HP77 8860-2018 Carbon Fiber Helmet Based on Bell’s highly successful F1 World Champion proven HP7 design, the Bell HP77 8860-2018 provides the latest impact protection by lowering the visor opening 12 mm and reinforcing the front of the helmet with advanced ballistic protection (ABP). The HP77 is the most advanced FIA8860-2018 helmet in Bell’s line-up, setting a new standard for lightweight, aerodynamically superior carbon fiber helmet performance to meet the intense demands of open-wheel and open-cockpit racing. The Bell HP77 is homologated to the FIA 8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The HP77 was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who considers safety of paramount importance.   FEATURES: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm adding ballistic protection from medium-size debris High-strength and high-modulus carbon fiber shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 intake and exhaust channels Shell and shield design optimized for aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory-installed HANS anchors HP helmet bag included Color: Carbon, Matte Finish Sizes: 54cm to 59+ Shield: Bell SE077 Pivot Kit: SV (same as for the Bell SE07) Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply.) Grey interior is standard.

Arai GP-7 SRC ABP  The new GP-7SRC ABP is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF’s existing benefits of high strength and extreme light weight. But there's a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-7SRC ABP meets or exceeds the FIA 8860-2018 ABP homologation standard. ABP (ADVANCED BALLISTIC PROTECTION) FIA's new ABP (Advanced Ballistic Protection) specification is intended especially for drivers in open cars. The GP-7SRC ABP has been strengthened in the forehead area, incorporating an external intrusion panel (previously mounted to the shield) that is now integrated into the helmet shell itself. The ABP homologation was written to reduce the risk of injury from debris or other objects striking a driver’s head. VENTILATION Three large, closeable, intake vents combined with larger 10mm holes and two aditional exhaust vents in the center of the helmet greatly increase air flow. A redesigned exhaust cowling improves aerodynamics, drawing out hot air escaping the helmet. The GP-7SRC comes with all vents unattached so you can customize the vent configuration to your specific needs. POSITIVE SHIELD LATCH Arai's positive latch mechanism provides solid shield closure while allowing normal operation of the shield. Designed as an integral component of the shield system, not just an add-on afterthought, its functional simplicity belies the complexity of the design. HANS POST ANCHORS Integrated seats accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepts a variety of anchor systems, making installation easy. The flat surface around the mounting nut allows the anchor post to rest flush on the helmet surface. SHELL Available in sizes XS through Large. Arai's proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance while keeping weight and bulk to a minimum. EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. DRINK TUBE COMPATIBILITY The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements. Measuring Your Head: An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Stilo Helmets ST5 FN ABP 8860-2018 The Stilo Helmets ST5 FN ABP 8860-2018 carbon fiber helmet was designed for professional racers needing to satisfy the latest FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. ABP is an acronym for "Advanced Ballistic Protection". The ABP replaces the zylon panel required by FIA in the previous generation (FIA 8860-2010) helmets, integrating stronger protection into the front of the helmet shell. A brand new testing procedure was introduced to evaluate this area, based on military ballistic specifications with a projectile shot at 250 km/h. The Stilo ST5 FN ABP was the first helmet to be certified to this new standard, offering a higher safety degree while maintaining dimensions and weight. The ST5 FN ABP 8860-2018 is among the lightest carbon fiber racing helmets on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to an innovative design incorporating mounting and routing for these options, integration is sleek and seamless with nothing protruding, hanging down, or otherwise getting in the way. When not in use, you don't even know they're there. Looking for increased visibility? The Stilo ST5 FN ABP 8860-2018 has a taller and lower-placed eyeport, giving you better visibility while not compromising your safety. Every Stilo visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. SIZING NOTE: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES: FIA 8860-2018 certification Includes Stilo HANS posts CMS Stilo Owner's Kit sold separately. Significantly lighter than previous Stilo helmets Sizing from XS through 3XL Stilo ST5 shields are interchangeable across all ST5 helmets Eight top ventilation holes (can be used with the Stilo ST5 Helmet Top Air System sold separately.) Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets Made from 100% medium-tensile carbon Weight (+/-30 g): Small shell 1200g (2.6 lbs) Large shell 1320g (2.9 lbs) If you want the absolute lightest FIA 8860-2018 ABP helmet on the market, check out the amazing Stilo Helmets ST5 FN ABP ZERO 8860-2018 Carbon Helmet. Measuring Your Head: The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Arai GP-7SRC 8860-2018 The new GP-7SRC is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary carbon fiber weave that combines its existing properties of high strength and extreme light weight. Arai's proprietary carbon fiber has a property that standard carbon fiber does not possess: flexibility. (Standard carbon fiber tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-7SRC meets or exceeds the latest FIA 8860-2018 homologation standards.  Fits Intermediate-Oval head shapes. VENTILATION Large, closable intake vents combined with a 10mm vent greatly increase air intake. Larger 10mm rear vent hole increases air flow further compared to previous models. POSITIVE SHIELD LATCH Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design. HANS POST ANCHORS Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. SHELL Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum. EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. DRINK TUBE COMPATIBILITY  The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements.   GET THE BEST FIT The GP-7SRC 8860-2018 is available in sizes XS to Large. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell HP7 Carbon Fiber FIA 8860-218 Helmet Developed through close collaboration with leading F1 drivers and teams, the carbon fiber HP7 is aerodynamically sleek, lightweight and efficient for the intense demands of open-wheel and open-cockpit forms of racing. The updated HP7 EVO-III meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing in high-speed forms of motorsports, the HP7 allows racers to take advantage of the latest technological innovations including aerospace composite materials and advanced energy absorbing liner systems. FEATURES: High-strength and high-modulus carbon fiber ultra-light shell FIA 8860-2018 homologation Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Powerful top and chin bar ventilation system with 12 intake and extraction channels for maximum air flow Shell and shield optimized for aerodynamic performance, low internal noise, and enhance energy management Integrated channels offer multiple options to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Available chin bar hole for drinking tube HP helmet bag included Shield: SE07 Pivot kit: SV(SE07) Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. Color: Carbon, Matte Finish This helmet will ship with signature required for delivery.

STILO ST5 GT 8860 CARBON FIBER HELMET The Stilo Helmets ST5 GT 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. ULTRALIGHT & ADAPTABLE The Stilo Helmets ST5 GT 8860-2018 is among the lightest carbon fiber racing helmets on the market. With its two integrated side ports, it can be outfitted with any combination of electronics, side- or top-forced air, hydration, and a helmet eject system. Thanks to Stilo's innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless. When not in use, you don't even know these features are there. Looking for increased visibility? The Stilo ST5 GT 8860-2018 has a taller and lower eyeport, giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES FIA 8860-2018 certification Includes Stilo HANS posts Significantly lighter than the previous ST4 helmets Sizing from Extra Small through 3XL All ST5 shields are now interchangeable across all ST5 helmets Eight ventilation holes for use with Stilo Helmets Top Air systems Prepared for side and frontal drinking systems Redesigned cheek pads are more contoured and comfortable than previous ST4 helmets Made from 100% medium tensile carbon Weight (intercom included) +/-30g: small shell 1370g (3.0 lbs) large shell 1470g (3.2 lbs) OTHER FIA 8860-2018 HELMETS FROM STILO For the absolute lightest 8860-homologated helmet with integrated side ports, please see the Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet. For the ZERO version without side ports, please see the Stilo Helmets ST5 N ZERO 8860-2018 Carbon Helmet. This helmet will ship with signature required for delivery. Measuring Your Head The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.

Bell HP6 8860-2018 Carbon Fiber Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmets, the HP6, with its modern and aggressive design, has been developed for racers in closed-car environments. The HP6 features a wide eye port for extended vision with an ultra-lightweight advanced carbon shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Also available is a fully-integrated radio communication kit, as well as hydration systems (available separately, or as an integrated feature of the Bell GT6 RD). FEATURES Ultra-lightweight advanced full carbon shell FIA 8860-2018 homologation Wide eye port for extended vision in closed cockpit cars Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Integrated channels offering multiple options for drink tube and radio systems Extraction vents to maximize cooling air circulation Factory installed HANS anchors Optional top forced air intake can be installed on the left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation HP helmet bag included Interior: Dark grey high strength, high comfort FR fabric Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Exterior Color: Carbon, matte finish Sizes: 6 3/4" (54cm) to 7 5/8"+ (61cm+) IN THE BOX HP6 helmet Clear SE06 3mm DSAF shield installed HP helmet bag Plastic tear-off posts installed Hex wrench key

Stilo ST5.1 GT Carbon SA2020 Helmet The ST5.1 GT Carbon is Stilo's Snell SA2020-compliant version of their best-selling carbon helmet. With an autoclave molded carbon fiber shell, the Stilo Helmets ST5.1 GT Carbon offers strength superior to fiberglass and composites while minimizing weight. With its large eyeport, the Stilo ST5.1 GT Carbon offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT Carbon retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (except for those sanctioning bodies requiring FIA 8860 homologation). INTEGRATED FLEXIBILITY The Stilo Helmets ST5.1 GT Carbon is unsurpassed in built-in flexibility. Its two side ports can be fitted separately with integrated communication electronics, forced air, helmet eject system, or a driver hydration system. Thanks to its innovative shell design, mounting and routing these options into the ST5.1 GT is sleek and seamless. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo simply offers the best-designed modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for your head-and-neck restraint. SIZING NOTE We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. FEATURES: Noise-attenuating earmuffs to reduce exterior noise Integrated side ports for adding communications, forced air, or hydration Snell SA2020 certification All Stilo ST5 shields and accessories work on the newer ST5.1 SA2020 helmets OTHER VERSIONS OF THE STILO ST5.1 HELMET: For the composite version, see the Stilo Helmets ST5.1 GT Composite Helmet. For the FIA 8860-2018 version, see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Helmet. Measuring Your Head The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

  Bell RS7C LTWT Carbon Fiber Helmet SA2020 Based on the design of the HP7, the Bell RS7 LTWT features an extraordinary lightweight carbon-composite shell made using Bell’s high-pressure proprietary molding system. The RS7 LTWT Carbon's innovative shell and shield design improve acoustic comfort, aerodynamic performance, and energy absorption. The Double Screen Anti-Fog (DSAF) shield and rubber eye port gasket ensure air, water, and dust don't enter the helmet. FEATURES Aerospace-grade, ultra-light carbon fiber shell Snell SA2020 certified Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Multi-purpose fitment system can be used with or without included ear cups Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 14 intake and extraction channels Interior ventilation channels maximize air flow Shell and shield optimized to improve aerodynamic performance Integrated channels offer multiple options for drink tube and radio systems Top spoiler, top and chin-bar gurneys available separately Top air attachments available separately Factory installed HANS anchors Color: carbon matte clear Shield: SE07 Pivot kit: SV(SE07) Sizes: 54cm to 61cm+

Schuberth SP1 Carbon Fiber Helmet SNELL SA2020 & FIA 8859-2015 With nearly 100 years dedicated to developing head protection solutions, and 20 years of providing the most technologically advanced helmets to top drivers in F1, IndyCar and other top series,  Schuberth presents its first motorsport helmet with both FIA 8859-2015 and SNELL SA2020 certifications: the SP1 Carbon. AERODYNAMICS & VENTILATION The SP1 Carbon was developed with extensive wind tunnel testing to achieve ideal aerodynamics and optimum air flow. It offers a perfect aerodynamic balance that can be customized with various spoilers and ventilation scoops to meet the requirements of every type of racing. With 12 ventilation channels across the SP1's shell, optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS (interior padding), providing the ideal flow for intake of cool air and exhaust of hot air. COMMUNICATION SYSTEM READY Channels in the cheek pads allow for easy installation of radio communications. A full selection of plug & play integrated electronics are available as options. From comfortable ear cup speakers to a 3.5mm jack for your ear buds -- or a system with both! -- you can choose a mic integrated into your chin pad or a boom mic. Schuberth helmet communications options make it easy to seamlessly integrate your race comms.  FULL CARBON SHELL & 3MM VISOR Every SP1 Carbon helmet is produced in Schuberth's own factory in Italy, by the same hands that produce the masterpiece SF3 FIA 8860-2018 ABP helmets used by many F1 drivers. The SP1 uses an exclusive, autoclave-cured carbon fiber shell handcrafted to create a unique helmet combining light weight, solid construction and superior safety in an iconic design. The SP1's 3D Injected visor is directly derived from their F1 expertise, offering 12 hues ranging from transparent to dark with several mirroring and multi-layered coating options. All standard visors are Pinlock 120 lens equipped for optimum fog resistant performance. External tear-off buttons are also installed. AVAILABLE ACCESSORIES: Schuberth SP1 Top Air Schuberth SP1 Individual Vent Scoops Schuberth SP1 Visors Schuberth SP1 Scoops Shuberth SP1 Helmet Bag Schuberth SP1 Visor Pouch WEIGHT: Small shell (XS to L): 3.0 lb (1360g) Large shell (L+ to XXL): 3.2 lb (1460g)          

Bell GT6 RD Carbon w/ Comms Derived from HP6, the Bell GT6 RD Carbon features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. The GT6 RD is fitted with a fully-integrated radio communication kit, including a front-mounted microphone and ear cup speakers providing excellent sound along with insulation from external noise. The kit includes a wired four-pin male IMSA radio connector.  FEATURES: Ultra-light premium carbon composite shell FIA 8859-2015 and Snell SA2020 homologations Wide eye port for better vision in closed cockpit cars Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Integrated channels offer options to install optional drink tube (not included, can be added at additional cost) Extraction vents to maximize cooling air circulation Factory installed communication system with microphone and ear cups (IMSA connector) Factory installed HANS anchors Optional top- and side-air intakes available for use with external cooling system Ear cups for increased noise insulation Interior: dark grey high-strength, high-comfort FR fabric Color: carbon, gloss finish Sizes: 6 3/4 (54cm) to 7 5/8+ (61cm+) IN THE BOX: GT6 Carbon Fiber helmet Clear SE06 3mm DSAF shield installed Draw-string helmet bag Plastic tear-off posts installed Hex wrench key Drink tube system (shown) is not included.

Bell RS7 Carbon Fiber The Bell RS7 Carbon Fiber SA2020 helmet features Bell’s proprietary high-pressure molding system based on the innovative design of the Bell HP7. The ultra-light carbon fiber shell is designed for optimum acoustic comfort, energy absorbing capability, and ideal aerodynamic performance. Top forced-air inserts improve internal ventilation while the hollow synthetic rubber gasket seal ensures that air, water, and dust won’t enter the helmet in outdoor racing environments. The Bell RS7 Carbon Fiber SA2020 helmet’s advanced ventilation system features 14 intake and extraction channels with air intake covers in a refined aero design for the most discerning racers. FEATURES: Snell SA2020 and FIA 8859-2015 homologations Includes clear SE07 3mm DSAF shield (SV SE07 pivot system) and DSAF anti-fog insert Ultra-light carbon fiber shell (high-pressure molded for improved strength) Fourteen intake and exhaust channels move hot air out of the helmet Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Excellent high-speed aerodynamic stability with optional chin bar, top Gurneys, and rear spoiler (sold separately) Top forced-air inserts including eyeport, eight-hole and ten-hole options when used with forced air system (sold separately) Integrated channels for optional integrated drink tube and radio systems. Ultra-plush grey Comfort-Max FR® interior fabric provides superior moisture wicking Pro-style, multi-density foam interior with contoured cheek pads for professional fit Narrow eye port M6 terminal hardware and hex wrench for Head and Neck Restraint anchors   This helmet will ship with signature required for delivery.