Stilo
Stilo ST5 FN ABP ZERO 8860-2018 Carbon Fiber Helmet
$6,862.00
Stilo Helmets ST5 FN ABP ZERO 8860-2018 Carbon Helmet
The Advanced Ballistic Protection (ABP) features reinforced areas above the visor opening, which is 10mm lower than non-ABP models. In short, this is the highest specification helmet ever developed.
The Stilo ST5 FN ABP Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection and impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere.
The Stilo ST5 FN ABP Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the integrated side ports of the Stilo Helmets ST5 GT 8860-2018 carbon helmet, it can still be outfitted with top forced air and a helmet eject system. The innovative design incorporates mounting and routing for these options at the time of manufacture, so integration is sleek and seamless with nothing hanging down or otherwise getting in the way. When not in use, you don't even know these features are there.
Looking for increased visibility? The Stilo Helmets ST5 N Zero 8860-2018 has a taller, lower-set eye port, giving you better visibility while not compromising safety. Stilo visors use a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves.
We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
FEATURES:
FIA 8860-2018 certified
Includes standard HANS post anchors
Includes Stilo Helmet & HNR bag
Sizing from XS through 3XL
All ST5 shields are interchangeable across all ST5 helmets
Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.)
Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets
Stilo ZERO shells are the lightest FIA 8860-2018 helmets available
WEIGHT:
Small shell: 930g / 2.1 lbs up to size L (59)
Large shell: 1.23kg / 2.7 lbs up to size 3XL (64)
For the GT version of this helmet (includes integrated side ports), please see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Fiber Helmet.
This helmet will require a signature for delivery.
Measuring Your Head:
An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
Chillout Systems
Chillout Cypher Pro Ultra-Lite Carbon Fiber Micro Cooler
$6,600.00
The Chillout Cypher Pro Ultra Light cooling system is designed for small cockpit race cars or teams needing to be at the lowest possible scale weight while providing driver comfort.
CHILLOUT CYPHER PRO ULTRA-LIGHT KIT DETAILS:
Manufacturer: Chillout
Manufacturer part number: CO-CYP1
Size: 7.87” x 4.09” x 6.90”
Weight: 5.7lbs
Input voltage: 10.6 - 14.2
Mounting plate material: Carbon fiber
CHILLOUT CYPHER PRO ULTRA-LIGHT KIT INCLUDES:
1x In-line voltage converter.
1x Carbon Fiber Mounting Plate.
1x Carbon Fiber Plenum
1x Wiring harness.
1x fill/priming bottle
1x Wired remote
36 inches of coolant tubes
1x External fan wiring harness. This is used to power a 12 volt external fan when eliminating the top fans and utilizing the carbon plenum.
This is an option in place of the dual 175 cfm fans allowing a 3 inch duct to permanently attach in their place. When using this duct, a 3 inch 275 CFM fan (Uber3) is required for operation.
LIGHTWEIGHT DESIGN
At a featherweight 5.7lbs, the carbon fiber intensive Cypher is the lightest Chillout cooler to date. Constructed using the lightest, most advanced materials, the 5.7lbs weight also includes the carbon fiber quick-release mounting plate.
SMALL FOR A REASON
Crew chiefs always need more space. The Chillout Cypher Pro Ultra-Lite measures 7.87” x 4.09” x 6.90” to increase your mounting location options.
DASH MOUNTED MULTI FUNCTION REMOTE
The easy to install remote control allows you to change your shirt temperature, Now control your remote mounted Chillout Cypher while strapped into your race seat.
DUAL 175 CFM FANS
Utilizing two 175 cfm internal brushless fan motors you will achieve 350 cfm of cooling air. This eliminates the need for an external blower system and the smallest footprint inside your race car.
Chillout Systems
Chillout Cypher Micro Cooler
$5,800.00
The Chillout Cypher Micro Cooler cooling system is designed for small cockpit race cars while providing excellence in driver temperature comfort.
CHILLOUT CYPHER MICRO COOLER DETAILS:
Manufacturer: Chillout
Manufacturer part number: CO-CYV1
Size: 7.87” x 4.09” x 6.90”
Weight: 5.7lbs
Input voltage: 10.6 - 14.2
Mounting plate material: Carbon fiber
CHILLOUT CYPHER MICRO KIT INCLUDES:
1x In-line voltage converter.
1x Carbon Fiber Mounting Plate.
1x Carbon Fiber Plenum
1x Wiring harness.
1x fill/priming bottle
1x Wired remote
36 inches of coolant tubes
1x External fan wiring harness. This is used to power a 12 volt external fan when eliminating the top fans and utilizing the carbon plenum.
This is an option in place of the dual 175 cfm fans allowing a 3 inch duct to permanently attach in their place. When using this duct, a 3 inch 275 CFM fan (Uber3) is required for operation.
LIGHTWEIGHT DESIGN
At a featherweight 5.7lbs, Chillout Cypher is the lightest Chillout cooler to date. Constructed using the lightest, most advanced materials, the 5.7lbs weight also includes the carbon fiber quick-release mounting plate.
SMALL FOR A REASON
Crew chiefs always need more space. The Chillout Cypher measures 7.87” x 4.09” x 6.90” to increase your mounting location options.
DASH MOUNTED MULTI FUNCTION REMOTE
The easy to install remote control allows you to change your shirt temperature, Now control your remote mounted Chillout Cypher while strapped into your race seat.
DUAL 175 CFM FANS
Utilizing two 175 cfm internal brushless fan motors you will achieve 350 cfm of cooling air. This eliminates the need for an external blower system and the smallest footprint inside your race car.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 GT ZERO 8860-2018 Carbon Fiber Helmet
$5,766.95
$6,408.00
Stilo ST5 GT Zero 8860-2018 Carbon Helmet
The Stilo Helmets ST5 GT Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere.
The Stilo Helmets ST5 GT Zero 8860-2018 carbon helmet is the lightest-weight carbon fiber racing helmet on the market (weight listed below). It has two integrated side ports each of which can accommodate electronics, forced air, helmet eject system, or a hydration system. This innovative design incorporates mounting and routing for these options into the helmet shell, so integration is sleek and seamless. When not in use, you don't even know the side ports are there.
For the "Naked" version of this helmet (without side ports), please see the Stilo Helmets ST5 N Zero 8860-2018 Carbon Fiber Helmet.
INCREASED VISIBILITY
The Stilo ST5 GT Zero 8860-2018 carbon fiber helmet has a taller, lower eyeport giving you better visibility without compromising your safety. Each visor has a center pinch-clip so opening and closing are easy even while wearing Nomex racing gloves.
We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
FEATURES:
FIA 8860-2018 certified
All ST5 shields are interchangeable across all ST5 helmets
Includes standard HANS post anchors
Includes Stilo Helmet Bag Plus HANS for your helmet and HNR
Eight top ventilation holes (can be used with Stilo ST5 Helmet Top Air System sold separately.)
Re-designed cheek pads are more contoured and comfortable than previous helmets
Stilo ZERO shells are the lightest FIA 8860-2018 helmets available
WEIGHT (including intercom):
Small Shell: 1130g / 2.5 lbs up to size L (59)
Large Shell: 1230g / 2.7 lbs up to size 3XL (64)
This helmet will ship to you with signature required for delivery.
Measuring Your Head:
An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 FN ZERO 8860-2018 Carbon Fiber Helmet
$5,766.95
$6,408.00
Stilo Helmets ST5 FN Zero 8860-2018 Carbon Helmet
The Stilo Helmets ST5 FN Zero 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance. Try as you may, you won’t find a safer, lighter-weight helmet anywhere.
The Stilo ST5 FN Zero 8860-2018 is the lightest-weight carbon fiber racing helmet on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 carbon helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to the innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless with nothing protruding from the helmet, hanging down or otherwise getting in the way. When not in use, you don't even know these features are there.
Looking for increased visibility? The Stilo ST5 FN Zero 8860-2018 has a taller, lower eye port giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing Nomex racing gloves.
We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
FEATURES:
FIA 8860-2018 certified
Includes standard HANS post anchors
Includes Stilo Helmet & HNR bag
Sizing from XS through 3XL
ST5 shields are now interchangeable across all ST5 helmets
Eight ventilation holes for use with Stilo Helmets Top Air systems
Redesigned cheek pads are more contoured and comfortable than previous designs
Stilo ZERO shells are the lightest FIA 8860-2018 helmets available
WEIGHT (INCLUDING COMM SYSTEM):
Small Shell: 1130g / 2.5 lbs up to size L(59)
Large Shell: 1230g / 2.7 lbs up to size 3XL (64)
For the GT version of this helmet (includes integrated side ports), please see the Stilo ST5 GT Zero 8860-2018 Carbon Fiber Helmet.
This helmet will require a signature for delivery.
Measuring Your Head:
An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
Bell
Bell HP77 8860-2018 Carbon Fiber Helmet
$5,750.00
Bell HP77 8860-2018 Carbon Fiber Helmet
Based on Bell’s highly successful F1 World Champion proven HP7 design, the Bell HP77 8860-2018 provides the latest impact protection by lowering the visor opening 12 mm and reinforcing the front of the helmet with advanced ballistic protection (ABP). The HP77 is the most advanced FIA8860-2018 helmet in Bell’s line-up, setting a new standard for lightweight, aerodynamically superior carbon fiber helmet performance to meet the intense demands of open-wheel and open-cockpit racing.
The Bell HP77 is homologated to the FIA 8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The HP77 was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who considers safety of paramount importance.
FEATURES:
Homologation: FIA8860-2018 ABP
Visor opening lowered 12 mm adding ballistic protection from medium-size debris
High-strength and high-modulus carbon fiber shell
Advanced multi-density, multi-piece liner for energy absorption and impact performance
Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor
Top and chin bar ventilation system with 12 intake and exhaust channels
Shell and shield design optimized for aerodynamic performance
Integrated channels for drink tube and radio systems
Top spoiler, top and chin bar gurneys available separately
Factory-installed HANS anchors
HP helmet bag included
Color: Carbon, Matte Finish
Sizes: 54cm to 59+
Shield: Bell SE077
Pivot Kit: SV (same as for the Bell SE07)
Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply.) Grey interior is standard.
Arai
Arai GP-7SRC ABP 8860-2018 Carbon Fiber Helmet
$4,599.95
Arai GP-7 SRC ABP
The new GP-7SRC ABP is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF’s existing benefits of high strength and extreme light weight.
But there's a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-7SRC ABP meets or exceeds the FIA 8860-2018 ABP homologation standard.
ABP (ADVANCED BALLISTIC PROTECTION)
FIA's new ABP (Advanced Ballistic Protection) specification is intended especially for drivers in open cars.
The GP-7SRC ABP has been strengthened in the forehead area, incorporating an external intrusion panel (previously mounted to the shield) that is now integrated into the helmet shell itself. The ABP homologation was written to reduce the risk of injury from debris or other objects striking a driver’s head.
VENTILATION
Three large, closeable, intake vents combined with larger 10mm holes and two aditional exhaust vents in the center of the helmet greatly increase air flow. A redesigned exhaust cowling improves aerodynamics, drawing out hot air escaping the helmet. The GP-7SRC comes with all vents unattached so you can customize the vent configuration to your specific needs.
POSITIVE SHIELD LATCH
Arai's positive latch mechanism provides solid shield closure while allowing normal operation of the shield. Designed as an integral component of the shield system, not just an add-on afterthought, its functional simplicity belies the complexity of the design.
HANS POST ANCHORS
Integrated seats accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepts a variety of anchor systems, making installation easy. The flat surface around the mounting nut allows the anchor post to rest flush on the helmet surface.
SHELL
Available in sizes XS through Large. Arai's proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance while keeping weight and bulk to a minimum.
EJECT READY CROWN PAD
Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system.
DRINK TUBE COMPATIBILITY
The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements.
Measuring Your Head:
An effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 FN ABP 8860-2018 Carbon Fiber Helmet
$4,118.95
$4,577.00
Stilo Helmets ST5 FN ABP 8860-2018
The Stilo Helmets ST5 FN ABP 8860-2018 carbon fiber helmet was designed for professional racers needing to satisfy the latest FIA 8860-2018 regulation. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance.
ABP is an acronym for "Advanced Ballistic Protection". The ABP replaces the zylon panel required by FIA in the previous generation (FIA 8860-2010) helmets, integrating stronger protection into the front of the helmet shell. A brand new testing procedure was introduced to evaluate this area, based on military ballistic specifications with a projectile shot at 250 km/h. The Stilo ST5 FN ABP was the first helmet to be certified to this new standard, offering a higher safety degree while maintaining dimensions and weight.
The ST5 FN ABP 8860-2018 is among the lightest carbon fiber racing helmets on the market. While it lacks the side ports of the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, it can still be outfitted with electronics, top forced air and a helmet eject system. Thanks to an innovative design incorporating mounting and routing for these options, integration is sleek and seamless with nothing protruding, hanging down, or otherwise getting in the way. When not in use, you don't even know they're there.
Looking for increased visibility? The Stilo ST5 FN ABP 8860-2018 has a taller and lower-placed eyeport, giving you better visibility while not compromising your safety. Every Stilo visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves.
SIZING NOTE:
We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
FEATURES:
FIA 8860-2018 certification
Includes Stilo HANS posts
CMS Stilo Owner's Kit sold separately.
Significantly lighter than previous Stilo helmets
Sizing from XS through 3XL
Stilo ST5 shields are interchangeable across all ST5 helmets
Eight top ventilation holes (can be used with the Stilo ST5 Helmet Top Air System sold separately.)
Re-designed cheek pads are more contoured and comfortable than previous Stilo helmets
Made from 100% medium-tensile carbon
Weight (+/-30 g):
Small shell 1200g (2.6 lbs)
Large shell 1320g (2.9 lbs)
If you want the absolute lightest FIA 8860-2018 ABP helmet on the market, check out the amazing Stilo Helmets ST5 FN ABP ZERO 8860-2018 Carbon Helmet.
Measuring Your Head:
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Arai
Arai GP-7SRC 8860-2018 Carbon Fiber Helmet
$4,095.00
Arai GP-7SRC 8860-2018
The new GP-7SRC is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary carbon fiber weave that combines its existing properties of high strength and extreme light weight.
Arai's proprietary carbon fiber has a property that standard carbon fiber does not possess: flexibility. (Standard carbon fiber tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-7SRC meets or exceeds the latest FIA 8860-2018 homologation standards. Fits Intermediate-Oval head shapes.
VENTILATION
Large, closable intake vents combined with a 10mm vent greatly increase air intake. Larger 10mm rear vent hole increases air flow further compared to previous models.
POSITIVE SHIELD LATCH
Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design.
HANS POST ANCHORS
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface.
SHELL
Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum.
EJECT READY CROWN PAD
Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system.
DRINK TUBE COMPATIBILITY
The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements.
GET THE BEST FIT
The GP-7SRC 8860-2018 is available in sizes XS to Large.
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Bell
Bell HP7 EVO III 8860-2018 Carbon Fiber Helmet
$3,999.95
Bell HP7 Carbon Fiber FIA 8860-218 Helmet
Developed through close collaboration with leading F1 drivers and teams, the carbon fiber HP7 is aerodynamically sleek, lightweight and efficient for the intense demands of open-wheel and open-cockpit forms of racing. The updated HP7 EVO-III meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing in high-speed forms of motorsports, the HP7 allows racers to take advantage of the latest technological innovations including aerospace composite materials and advanced energy absorbing liner systems.
FEATURES:
High-strength and high-modulus carbon fiber ultra-light shell
FIA 8860-2018 homologation
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor
Powerful top and chin bar ventilation system with 12 intake and extraction channels for maximum air flow
Shell and shield optimized for aerodynamic performance, low internal noise, and enhance energy management
Integrated channels offer multiple options to install drink tube and radio systems
Available with or without duckbill (chin spoiler)
Top spoiler, top and chin bar gurneys available separately
Factory installed HANS anchors included
Available chin bar hole for drinking tube
HP helmet bag included
Shield: SE07
Pivot kit: SV(SE07)
Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard.
Color: Carbon, Matte Finish
This helmet will ship with signature required for delivery.
Chillout Systems
Chillout Systems Quantum Cooler Pro
$3,999.00
Chillout Systems Quantum Cooler Pro
The Chillout Systems Quantum Cooler series of coolers are the most powerful portable iceless cooling systems ever designed for auto-racing. Requiring no ice, this driver cooling system is completely maintenance-free, running solely off the strength of a rotary micro-compressor that is as powerful as other compressors 5x its size.
Rated at 20 liters per minute/16 psi, the Quantum Pro system is capable of chilling to under 35º F. Max amp draw is rated at 18-22 amps, depending on installation and environmental conditions. System contains less than 1.75 oz. of freon sealed within the rotary micro-compressor system. The Quantum Pro offers many different temperature settings that support varying performance conditions. Dual 220-cfm fans help decrease amp draw, and a bright, easy-to-read color digital display offers valuable information and data.
Weighing in at 10.5 lbs, the Quantum Pro is portable and hot-swappable so you can quickly move it from mounting location to mounting location within seconds. A dash-mountable digital control display is available for cooler installations out of the driver's reach.
When planning installation, please consider the interior temperature of your vehicle under racing conditions. Keep in mind that ducting is necessary for many installations to achieve the best results. Using four-inch ducting is highly recommended and eliminates the need for a supplemental blower. Three-inch ducting is restrictive and requires the use of a high performance (250+ cfm) blower.
Quantum Pro vs Quantum V3:
Full-color LCD display with extensive data
Internal bypass valve eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected.
Dual 4-inch, 220 cfm brushless fans
50% larger condenser vs V3
25% larger evaporator vs V3
LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources.
Coolant reservoir has double the capacity at 13 oz.
Eco mode maintains system under 18 amps at all times.
Carbon fiber mounting plate further reduces weight and heat-soak.
Two flow sensors for monitoring both sides of the flow valves for easy troubleshooting and maintenance.
IP65 rated.
In the Box:
Quantum Cooler Pro
Carbon Fiber Mounting Plate
Wiring Harness
Locking Ball Pins
Priming Tube
Cross Compatibility:
The Chillout Systems Quantum Cooler Pro is compatible with other brands of cooling shirts that use 1/4" tubing. You will need to purchase the Chillout Systems Dual Prong Adapter and Insulated Hose in order to connect to non-Chillout shirts.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 GT 8860-2018 Carbon Fiber Helmet
$3,603.95
$4,005.00
STILO ST5 GT 8860 CARBON FIBER HELMET
The Stilo Helmets ST5 GT 8860-2018 carbon helmet was designed for professional racers needing to satisfy the strict FIA 8860-2018 regulations. It’s also the helmet of choice for drivers who won’t compromise their safety, no matter where they’re racing. This certification provides an unparalleled level of puncture protection as well as impact resistance.
ULTRALIGHT & ADAPTABLE
The Stilo Helmets ST5 GT 8860-2018 is among the lightest carbon fiber racing helmets on the market. With its two integrated side ports, it can be outfitted with any combination of electronics, side- or top-forced air, hydration, and a helmet eject system. Thanks to Stilo's innovative design which incorporates mounting and routing for these options at the time of manufacture, integration is sleek and seamless. When not in use, you don't even know these features are there.
Looking for increased visibility? The Stilo ST5 GT 8860-2018 has a taller and lower eyeport, giving you better visibility while not compromising your safety. Each visor has a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves.
We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
FEATURES
FIA 8860-2018 certification
Includes Stilo HANS posts
Significantly lighter than the previous ST4 helmets
Sizing from Extra Small through 3XL
All ST5 shields are now interchangeable across all ST5 helmets
Eight ventilation holes for use with Stilo Helmets Top Air systems
Prepared for side and frontal drinking systems
Redesigned cheek pads are more contoured and comfortable than previous ST4 helmets
Made from 100% medium tensile carbon
Weight (intercom included) +/-30g:
small shell 1370g (3.0 lbs)
large shell 1470g (3.2 lbs)
OTHER FIA 8860-2018 HELMETS FROM STILO
For the absolute lightest 8860-homologated helmet with integrated side ports, please see the Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet.
For the ZERO version without side ports, please see the Stilo Helmets ST5 N ZERO 8860-2018 Carbon Helmet.
This helmet will ship with signature required for delivery.
Measuring Your Head
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally then around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
Sabelt
Sabelt Custom Superlight TS-10 Fire Suit
$3,575.00
Sabelt Custom Superlight TS-10 Fire Suit
If you've ever wanted a fully customized fire suit tailored to your body and designed specifically for you in every way, Sabelt has the solution for you!
The Sabelt Superlight TS-10 is unquestionably the lightest fire suit on the market, weighing in at only 265 g/m² while still meeting the latest FIA 8856-2018 homologation for unsurpassed driver safety. The custom version of this suit can be tailored to your specific needs, including choosing from a wide array of colors. You can select Primary, Secondary and Tertiary colors in addition to selecting thread colors (if desired). You'll have the ability to add custom logos, manufacturer logos, series logos and more.
Whether you drive in IMSA, WEC, Ferrari Challenge, etc., we've made suits for drivers of all levels campaigning in the these and many other racing series.We already know which series logos need to be placed in what locations for series compliance, guaranteeing your customization options are hassle-free.
Perhaps you don't run in a pro or semi-pro series and you simply want a fire suit specifically tailored to fit your body (and to match your livery) perfectly. We can make that happen, too; without the need for series compliance, the door is wide open to have your fire suit made whatever ways suit your desires.
Suit production and delivery typically ranges from 3-4 weeks. Once in production, custom suit orders can't be canceled, changed, or refunded.
OPTIONS INCLUDE:
Name on suit
Country flag on suit
Belt on suit
Fit (slim or regular)
Cooling shirt tube pass-through (none, left, or right)
Bootcut or standard cuff
Pockets (none, normal, and/or cellphone)
Logos printed or embroidered
(The Bell helmet, shoes, and gloves pictured above are not included.)
IMPORTANT PRICING & ORDERING NOTES:
The standard price includes basic customization, colors and patterns. Once you place your order, a custom suit specialist from Competition Motorsport will reach out to you to ensure your specific needs are met. You'll be sent a measurement chart and we'll confirm color options, series compliance, logos, and other details.
You will be able to submit photos of your livery, examples of suits similar to what you want, and anything else that will help us create the artwork for your custom suit. A proof will be sent to you for revisions and/or approval, typically within two to three business days. Once design, colors, sizing, etc. is approved, the final cost of your custom suit will be sent to you in a supplemental invoice. (Factors affecting cost include number of logos, complexity of design, custom colors, etc.)
STANDARD SUPERLIGHT TS-10 FEATURES:
FIA8856-2018 approved
Fabric weight 265 g/m²
Full floating sleeves
Large stretch panel in lumbar and hips
Driver cooling tube pass-through on left hip
Cellphone pocket on front right thigh
Pre-curved arms
