C3 Carbon Ferrari 458 Carbon Fiber Rear Diffuser - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 458 Carbon Fiber Rear Diffuser $2,099.99
C3 Carbon Ferrari 458 Carbon Fiber Rear Diffuser FITS: Ferrari 458 Italia Replace the heavy fiberglass diffuser on the rear on your Ferrari F458 with a lightweight, beautifully crafted Carbon Fiber Rear Diffuser from C3. The hefty, drably painted OEM diffuser belies the Formula 1 roots of the 458, adding unnecessary weight aft of the rear axle. Ferrari offers a carbon replacement for $9,600! C3 makes an autoclaved, pre-impregnated 3k dry carbon fiber replacement for a reasonable price with no compromise in quality, fitment or finish. C3 has perfectly matched the OEM Ferrari 1x1 3K plain carbon fiber weave; both functional and beautiful, this is our most popular upgrade for the 458. A common complaint among 458 owners about the factory diffuser, which breaks easily, is that it's easy to break in daily driving. The C3 Carbon Fiber diffuser, by comparison, is far more robust. However, should any of the diffuser fins on our piece get scuffed or chipped, they can be easily replaced individually! FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave that matched to factory Ferrari carbon Weighs 67% (over 10 lbs.) less than the factory Ferrari piece Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit with ground clearance equal to the original factory diffuser Installs easily in minutes with no modification to your 458 Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 458 Carbon Fiber Rear Fog Light Trim - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 458 Carbon Fiber Rear Fog Light Trim $1,099.99
C3 Carbon Ferrari 458 Carbon Fiber Rear Fog Light Trim Replace the heavy, drably-painted fiberglass rear fog light surrounds on your Ferrari 458 with beautiful OEM-quality Carbon Fiber Surrounds from C3. Expertly crafted from autoclaved, pre-impregnated dry carbon fiber matched to the factory Ferrari 1×1 3K plain weave, the C3 Carbon Fiber Rear Fog Surrounds add a distinct touch of beauty and visual interest to the rear of the 458. C3 uses the same production processes Ferrari uses for their OEM parts, guaranteeing perfect fitment surround and requiring no modifications for installation. Includes two C3 Carbon Fiber Rear Fog Light Surrounds  FEATURES: Autoclaved, pre-preg dry carbon fiber in a 1x1 3K plain weave identical to factory Ferrari carbon Clear-coated with a automotive gloss urethane, hand polished to a mirror finish OEM-level quality and fitment Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler - Competition Motorsport
C3 Carbon C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler $1,649.99
C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler Upgrade your F12's rear end with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber rear spoiler from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon rear spoiler is fully functional, installs easily, and dramatically upgrades the look of your F12 Berlinetta! FITS Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser $3,099.00
C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser Replace the heavy, fragile fiberglass diffuser on the rear on your Ferrari 488 with a strong, lightweight, beautifully crafted carbon fiber rear diffuser from C3. The 488's heavy, drab-black factory diffuser belies the car's Formula 1 roots, adding unnecessary weight aft of the rear axles. Naturally, Ferrari offers a carbon fiber replacement -- for over $10,000! C3 Carbon uses an autoclave to create our pre-impregnated (pre-preg) dry carbon fiber 488 diffuser for uncompromising quality, fitment, and finish. All at a fraction of the cost of the Ferrari piece. C3 have perfectly matched the OEM Ferrari 1x1 3K plain carbon fiber weave to make a stunning diffuser that is functional, beautiful, and durable. A common complaint among 488 drivers is the factory diffuser being easily and irreparably damaged during everyday driving. Not only is the C3 Carbon rear diffuser more robust in this regard, but the fins are individually replaceable should one be scuffed or damaged. Not so with the Ferrari piece. FITS: 2016+ Ferrari 488 GTB FEATURES: Autoclaved pre-preg dry carbon fiber in a 1x1 3K plain weave identical to factory Ferrari carbon fiber Weighs 67% less than the original fiberglass Ferrari piece  Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit with ground clearance equal to the original factory diffuser Installs easily in minutes with no modification to your 488 Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 458 Carbon Fiber Side Mirrors - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 458 Carbon Fiber Side Mirrors $1,349.99
C3 Carbon Ferrari 458 Carbon Fiber Side Mirrors Direct replacement for the factory-fitted side mirrors on the Ferrari 458, these beautifully finished two-piece carbon fiber mirror cases from C3 Carbon add drama and style to your 458. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber side mirrors are a 1x1, 3K plain weave matching OEM Ferrar carbon precisely. They install easily and fit perfectly for a truly factory appearance, truly evoking the long motorsports heritage of your Ferrari 458. Kit contains both left and right mirror casings and stalks. You will re-use the mirror lenses from your 458. FITS: 2010+ Ferrari 458 models FEATURES: Includes both upper and lower mirror case for a completely factory appearance Autoclaved pre-preg dry carbon fiber with 1x1 3k plain weave matched to Ferrari OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 458 Carbon Fiber Front Intake Winglets - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 458 Carbon Fiber Front Intake Winglets $999.99
C3 Carbon Ferrari 458 Carbon Fiber Front Intake Winglets C3 Carbon replacements for the stock intake flaps on the nose of the Ferrari F458. The OEM pieces are boring painted fiberglass, perfect for replacement with stunning high-gloss carbon fiber from C3. Crafted using autoclaved, pre-impregnated 3k dry carbon fiber in a 1x1 weave matching OEM Ferrari carbon fiber, these replacement front winglets are things of beauty. Expertly matched to the identical specs of the OEM pieces, fit and finish are perfect. And with Ferrari's own carbon fiber replacements costing nearly $4,400, you get the OEM carbon look without the Ferrari price tag. Includes two front intake winglets for the Ferrari 458 Coupe or Spider. FEATURES: Autoclaved pre-preg dry carbon fiber in a 1x1 3k plain weave matching OEM Ferrari carbon Clear-coated using automotive urethane, hand polished to a mirror finish OEM-level fitment for a perfect replacement with no need for any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at over 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Front Trunk - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Front Trunk $2,199.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Front Trunk C3 uses digital 3D laser scanning to ensure that their autoclaved, pre-impregnated (pre-preg) dry carbon fiber front trunk panels fit and function as perfectly as the factory pieces. The difference is C3 does it for a fraction of the cost of Ferrari carbon! C3 has matched the OEM Ferrari 1x1 3K plain weave for a perfectly factory Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. FITS: All 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave identical to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Rear Fog Light Cover - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Rear Fog Light Cover $449.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Rear Fog Light Cover Very cool carbon fiber rear fog lamp cover for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber process results in a stunning piece that installs easily and fits perfectly, adding a dash of drama to the rear of your 488. C3 matches the factory Ferrari 1x1 3K plain weave for a perfectly original Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. Especially complementary to the C3 Carbon Fiber Rear Diffuser for the Ferrari 488. FITS: 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk Package - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 458 Carbon Fiber Front Trunk Package $1,999.99
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk C3's exacting quality, precise fitment, and a premium hand-polished finish come at a far more reasonable price than the factory Ferrari pieces. Precision-formed in an autoclave from the finest aerospace-grade pre-impregnated dry carbon fiber, each C3 piece matches the 1x1, 3K plain weave of OEM Ferrari carbon perfectly. Fit-and-finish are, of course, impeccable for a truly factory appearance. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1, 3K plain weave matched to OEM Ferrari Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Each piece installs in minutes without any modifications KIT INCLUDES: Four pre-preg dry carbon trim panels Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 458 Carbon Fiber Side Skirts $2,749.99
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts Made from aerospace-grade autoclaved dry carbon fiber and matched to the Ferrari factory's signature 1x1 3K plain weave pattern, these side skirts are a perfect match to the stunning carbon fiber on the 458. Ferrari can add them to your 458 build at the factory...for $9,000! You can easily install them yourself using only hand tools for a fraction of the factory cost, without sacrificing even the smallest bit of fitment, finish, or quality. Unlike many other brands, these are not carbon overlaid on fiberglass. C3 uses only 100% hand-laid pre-preg dry carbon fiber, formed in the autoclave at high pressure and temperature using billet aluminum molds. These Ferrari carbon fiber side skirts were originally developed using highly innovative fluid dynamics techniques and perfected in the wind tunnel in order to optimize the 458's aerodynamics. The lateral plane on each skirt plays a crucial role in reducing high-speed lift by minimizing air flowing from the side of the car into the underside. C3 Carbon's carbon fiber combines cosmetic appeal with outstanding technical performance, reducing the total weight of the car in the process. FEATURES: Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 458 Carbon Fiber Engine Trim - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 458 Carbon Fiber Engine Trim $1,649.99
C3 Carbon Ferrari 458 Carbon Fiber Engine Trim FITS: Ferrari F458 Italia Ferrari displays the incredible F458 engine under a glass bonnet, which is the perfect opportunity to surround it with beautiful C3 carbon fiber instead of the factory's dull black plastic. A $7,888 option offered by Ferrari, the C3 Carbon Fiber Engine Cover offers exacting quality, precise fit, and a premium finish at a much more reasonable price. Made from the finest aerospace-grade pre-impregnated (pre-preg) dry autoclaved carbon fiber, C3 matches the 1x1 3K plain weave of factory Ferrari carbon pieces perfectly. Fit and finish are impeccable for a truly factory look. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to factory Ferrari carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit! KIT INCLUDES: Two carbon fiber engine bay side panels One carbon fiber engine bay firewall panel Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Trim - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Trim $1,099.99
C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Bay Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 Spider! Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses an autoclave to mould pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish that rival the factory carbon upgrade (for which Ferrari charges a fortune), bringing the 488 Spider engine room up to standard! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Straightforward installation makes this a very popular upgrade for our 488 Spider customers. FITS: 2016+ Ferrari F488 Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel $799.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel FITS: 2016+ Ferrari F488 GTB Coupe only Stunning carbon fiber panel to add a bit of flair to your 488 GTB engine bay. This piece installs against the firewall under the glass backlight, replacing the stock flat-black plastic trim. C3 Carbon uses ultra-precise CNC-machined billet moulds to create this incredible pre-preg dry carbon fiber replacement with quality, fit, and finish equaling expensive factory Ferrari carbon pieces. C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship at a reasonable price. Installation is simple. This piece can be paired with C3 Carbon engine surrounds in the Engine Bay Carbon Kit for a stunning upgrade of your car's engine bay. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds $2,749.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds Stunning carbon fiber engine cover panels are an excellent upgrade for your 488 GTB! Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine covers are a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a favorite our 488 GTB customers. For the complete carbon treatment for your whole 488 GTB engine room, see our Complete 488 Engine Kit. FITS: 2016+ Ferrari F488 GTB Coupe (for Spider, click here). FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Engine Oil-Latch Cover - Competition Motorsport
C3 Carbon C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Engine Oil-Latch Cover $999.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Engine Oil/Latch Cover Stunning carbon fiber engine accessory cover sits front and center in your 488 engine bay. Ferrari displays the 488's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic oil fill/latch cover (front-and-center under the bonnet) is a significant let down. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber replacement fits and functions as perfectly as the factory piece (for which Ferrari charges a fortune) and brings the 488 engine bay up to standard. C3 matched the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Easy installation makes this a must-have for any 488 owner. FITS: 2016+ Ferrari F488 GTB and Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa