Camaro SS (Gen 6)

Girodisc Chevrolet Camaro SS (6th Gen) Rear Rotors The Girodisc A2-271 Rear Rotors are a precision-engineered, direct replacement for the OEM discs on the sixth-generation Chevrolet Camaro SS. Designed to enhance braking performance, reduce weight, and improve cooling, these 2-piece floating rotors deliver track-ready reliability and street-friendly refinement—all while retaining factory fitment and ABS function. Lightweight Construction & Improved Cooling By upgrading to Girodisc’s two-piece rotor design, you eliminate unnecessary rotational mass. The lightweight 6061-T6 aluminum hat significantly reduces unsprung weight, improving suspension response and acceleration. The cast-iron outer rings are produced from Girodisc’s proprietary high-carbon alloy, featuring curved internal vanes that act as a centrifugal pump to draw cooling air through the rotor—perfect for high-performance driving and track sessions. Race-Grade Floating Mount System The rotors utilize a fully floating mount system that connects the rotor ring to the hat via 10 high-strength alloy steel drive pins. Each pin is cadmium-plated for corrosion resistance and secured with class 12.9 cap screws and hardened washers. Girodisc incorporates anti-noise spring washers to allow thermal expansion while maintaining a rattle-free, quiet operation suitable for both street and track use. Vehicle Fitment Chevrolet Camaro SS (6th Generation, 2016+) Compatible with factory rear calipers No modifications required — direct bolt-on replacement Technical Specifications CMS Number: A2-271 Position: Rear Design: 2-piece floating rotor Material: High-carbon cast iron ring with 6061-T6 aluminum hat Vane Design: Curved directional vanes Hardware: Cadmium-plated steel drive pins, class 12.9 cap screws Rebuildable: Yes — replace the rotor rings, reuse the hats Sold/Price: Per pair FAQs for the Girodisc A2-271 Are these rotors a direct fit? Yes, the Girodisc A2-271 rear rotors are a direct bolt-on replacement using the OEM calipers and hardware—no modifications needed. Do they improve braking performance? Absolutely. The reduced rotational mass improves throttle response and suspension compliance, while the curved vanes enhance cooling and fade resistance. Are they noisy? No. The floating hardware design uses anti-noise spring washers to eliminate rattle and vibration during street driving. Are these rotors rebuildable? Yes. The rotor rings can be replaced independently, allowing cost-effective rebuilds and extended service life. Upgrade your Chevrolet Camaro SS (6th Gen) with Girodisc’s lightweight, performance-engineered rear rotors for improved stopping power, cooling efficiency, and long-term value.

Cobalt Front Brake Pads Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win. Fits the Following Cars (Front): Camaro SS w/ 6-Piston Brembo (2016-2019) Camaro ZL1 (2012-2015) Corvette C8 Z06 Iron Rotor (2022+) Corvette C7 Z06 Corvette C7 Z07 w/ Iron Rotors Conversion Dodge Viper ACR w/ Iron Rotors Conversion (2014-2017) Mercedes C63 AMG Black Series

Pagid Racing Brake Pads 8208 Pagid 8208 Brake Pad Fitment Guide Make Model  Years Front Rear Chevrolet Camaro SS [Gen 6] 4-piston Brembo caliper 2016 -     X Chevrolet Camaro SS [Gen 6] 6-piston Brembo caliper - upgrade kit 2016 -     X Chevrolet Camaro SS 1LE [Gen 6] 6-piston Brembo 2016 -     X Chevrolet Camaro GT4 R [race car] 2017 -     X Chevrolet Corvette C7 base 2013 - 20     X Chevrolet Corvette C7 Z06 [iron brakes] 2015 -     X Chevrolet Corvette C7 Z51 2014 -     X Ford Mustang Shelby GT350 [6-piston Brembo caliper / 15.5-inch rotor] 2015 -     X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19-5 Compound Pagid RSL 19-5 has a slightly higher and more aggressive coefficient of friction and a stronger initial bite compared to RSL 19. Often used on the rear axle of heavier GT3 and GTE cars to fine-tune brake bias. It can also be used on the front of lighter cars for a more aggressive feel than RSL 19. Pagid RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Pagid Racing Brake Pad Shape 2487 Fitment Guide Pagid 2487 Brake Pad (FMSI 2487) Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z51 14 - X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Mustang Boss 302 12 - 13 X Ford Mustang GT [4 piston Brembo] 11 - 14 X Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc] 07 - 14 X Honda Civic Type R [Brembo brakes] Gen IX and X 15 - X Hyundai Genesis Coupe 3.8 track 10 - 16 X KIA Stinger 3.3 T-GDI V6 [4 piston Brembo] 18- X Maserati Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm] 13 - X Mitsubishi Lancer Evo V - Evo IX 98 - 06 X Mitsubishi Lancer Evo X 07 - 16 X Subaru STI 3rd & 4th generation 03 - 16 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 2487 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 2487 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 2487 Brake Pad RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid Racing 2487 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid Racing 2487 Brake Pad RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Girodisc GP-Series Pads No. 592 (Front) The Girodisc GP-Series No. 592 front pad family delivers precise fitment and confident braking for Brembo-equipped performance applications using the D592 pad shape. Available in GP10 street, GP35 all-around race, and GP40 sprint race compounds, these pads let you tailor bite, heat capacity, and rotor friendliness to your driving style. Whether you daily-drive the car, run frequent HPDE events, or push in sprint races, there is a 592-series compound that fits your needs. Fits the Following Vehicles Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Dodge Viper 01 - 02 X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X KTM X-Bow 08 - X Lancia Delta 2.0 HF Int.16V Evo 91 - 94 X Lotus Esprit Turbo 94 - 96 X X Maserati Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm] 13 - X Maserati Grand Turismo 07 - X Peugeot 406 Coupe Brembo brake 97 - 04 X Renault Clio II 3.0 V6 mid engine 00 - 05 X X Seat Leon 1.8T Cupra R (Brembo) 03 - 06 X Seat Leon 2.8 Cupra 4 (Brembo) 01 - 06 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Features • Multiple compounds available to match street, HPDE, and sprint racing use• Direct-fit 592 pad shape for popular Brembo performance calipers• Consistent pedal feel and modulation across a wide temperature range• Dedicated iron-rotor formulation for reliable performance on track• Available as a complete axle set for the front brakes Compound Overview GP10 Street Pads for 592 Shape – GP10-0592.15Designed for performance-minded street drivers, GP10 semi-metallic pads balance daily drivability with the ability to handle occasional track sessions. They offer reduced noise and dust compared to full race pads while still delivering responsive pedal feel and solid stopping power when you pick up the pace. For drivers planning frequent or extended track use, Girodisc recommends stepping up to a dedicated race compound for better high-heat durability. GP35 Race Pads for 592 Shape – GP35-0592.15GP35 is the all-around race compound that blends the bite of sprint pads with the durability of endurance pads. It beds quickly and is designed to work with both street car ABS and motorsport-grade ABS. A smooth, linear torque curve gives excellent modulation and release under trail braking, making GP35 a favorite for advanced HPDE drivers and cars competing in a wide range of professional and club racing series. GP40 Sprint Race Pads for 592 Shape – GP40-0592.15GP40 is a sprint-focused compound that offers strong race-ready bite without punishing your rotors. Sitting between a pure sprint and endurance formulation, it maintains good pedal feel and heat capacity while remaining relatively rotor friendly. These pads have been proven in demanding sprint and long-distance events and are ideal for drivers who want aggressive braking performance with controlled wear. Specifications • Pad Shape: 592 (D592 pattern)• Position: Front• Available Compounds: GP10 performance street, GP35 all-around race, GP40 sprint race• Thickness: 15 mm (592.15 specification)• Rotor Type: Iron rotors only• Sold as: One front axle set Girodisc GP-Series 592 Pad FAQs Which compound should I choose for a mostly street-driven car with occasional track days? GP10 is the best fit for primarily street use with light track work. It offers quieter operation and lower dust than the race pads while still giving you confident braking when you drive harder. When is GP35 the right choice? Choose GP35 if you run frequent HPDE events or club racing and want a single race pad that can handle a wide range of tracks and tires. It offers strong bite, good life, and excellent modulation, making it a versatile “do-it-all” race option. Who should run GP40? GP40 is aimed at more serious sprint-race and aggressive track drivers who want a higher-friction feel and strong initial bite while still keeping rotor wear under control. It’s a great option if you’re chasing lap times and running shorter, intense sessions. Are these pads compatible with carbon-ceramic rotors? No. All GP10, GP35, and GP40 592 pads are designed specifically for iron brake rotors and should not be used with carbon-ceramic (CCB) systems. Do these pads work with factory ABS and stability control? Yes. The GP-series compounds are formulated to work properly with modern ABS and stability-control systems when matched to appropriate tires and properly bedded in. Upgrade your Brembo-equipped performance car with Girodisc GP-Series 592 pads and choose the compound that matches how you drive—whether that’s daily commuting, flat-out sprint racing, or something in between.

Racing Technologies P1012 Brake Pads (Front) Fitment Guide Racing Technologies P1012 Brake Pad (FMSI 2487) Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C7 base 13 - 19 X Chevrolet Corvette C7 Z51 14 - 19 X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Mustang Boss 302 12 - 13 X Ford Mustang GT [4 piston Brembo] 11 - 14 X Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc] 07 - 14 X Honda Civic Type R [Brembo brakes] Gen IX and X 15 - X Hyundai Genesis Coupe 3.8 track 10 - 16 X KIA Stinger 3.3 T-GDI V6 [4 piston Brembo] 18- X Maserati Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm] 13 - X Mitsubishi Lancer Evo V - Evo IX 98 - 06 X Mitsubishi Lancer Evo X 07 - 16 X Subaru STI 3rd & 4th generation 03 - 16 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487   The Race Technologies P1012 brake pad is a performance-focused pad shape engineered for compatible high-performance braking systems used in HPDE, track days, club racing, and motorsport. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth and 15 mm pad thickness, the P1012 features a distinctive backing plate profile and curved friction surface designed for demanding braking applications. Competition Motorsport offers the Race Technologies P1012 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for a track weekend or competitive racing, choosing the correct pad shape and compound is essential for predictable, consistent braking performance. Race Technologies P1012 Brake Pad Specifications Pad Shape: P1012 Overall Width: 132 mm Overall Height: 77 mm Friction Material Depth: 62 mm Pad Thickness: 15 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, sprint racing, and motorsport, depending on compound The P1012 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its specialized mounting geometry makes accurate shape identification important when replacing existing brake pads or selecting friction materials for compatible performance calipers. Always compare the P1012 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Engineered to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is particularly well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-oriented compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 provides a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking performance across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where strong braking response and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1012 compound depends on the vehicle's intended use and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1012 Brake Pads? The Race Technologies P1012 combines a 132 mm overall width with a 77 mm height, 62 mm friction material depth, and 15 mm thickness. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible high-performance braking systems. Distinctive Race Technologies P1012 backing plate geometry 132 mm overall width and 77 mm overall height 62 mm friction material depth 15 mm nominal pad thickness Choice of RE10 racing or TS20 street/track compounds Race Technologies P1012 Brake Pad Fitment The Race Technologies P1012 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, 15 mm thickness, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1012 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1012 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.

Carbotech CT1474 Brake Pads Carbotech CT1474 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin DB11 [cast iron brakes] 16 - 23 X Aston Martin Vantage [cast iron brakes] street car 18 - X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z51 14 - X Dodge Viper SRT TA (time attack) 14 - 17 X X Ford GT 04 - 06 X X Ford Ford GT (second generation) ceramic brakes 17 - X Ford Mustang Boss 302 12 - 13 X Ford Mustang GT [4 piston Brembo] 11 - 14 X Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15 disc] 07 - 14 X Honda (Acura) Civic Type R [Brembo brakes] IX and X generation 15 - X Hyundai Genesis Coupe 3.8 track 10 - 16 X KIA Stinger 3.3 T-GDI V6 [4 piston Brembo] 18- X Maserati Ghibli (M157) [4 piston Brembo caliper / disc ø 345mm] 13 - X Mitsubishi Lancer Evo V - Evo IX 98 - 06 X Mitsubishi Lancer Evo X 07 - 16 X Renault Mégane III 2.0 RS [Brembo brakes] without electronic hand brake 08 - 16 X Subaru STI 3rd & 4th generation 03 - 16 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Available Carbotech Compounds 1521 — High-performance street compound with low dust, low noise, and excellent release and modulation. AX6 — Autocross-focused compound with strong low-temperature bite and progressive control. XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior. XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance. XP12 — More aggressive race compound with added bite and high-temperature capability. RP2 — Endurance racing compound designed for sustained performance and strong fade resistance. XP20 — Very aggressive racing compound with high torque and extreme heat capability. XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands. How to Choose the Right Compound 1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use. Carbotech CT1474 Brake Pads FAQs How do I know if CT1474 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle. Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications. Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound. Choose the Carbotech CT1474 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.

Race Technologies P1013 Brake Pads (Rear) Fitment Guide Race Technologies P1013 / 1404 Brake Pad (FMSI 2487)Fits the Following Calipers: Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin DB11 [cast iron brakes] 16 - 23 X Aston Martin Vantage [cast iron brakes] street car 18 - X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C6 Brembo 6 piston non ceramic 09 - 13 X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z51 14 - X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Ford GT (second generation) ceramic brakes 17 - X Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487   The Race Technologies P1013 brake pad features a distinctive wide-format backing plate designed for compatible high-performance brake calipers. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth, the P1013 combines a curved friction surface with two angled friction grooves and specialized mounting features for demanding performance driving and motorsport applications. Competition Motorsport offers the Race Technologies P1013 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, selecting the correct pad shape and compound is essential for proper fitment and predictable braking performance. Race Technologies P1013 Brake Pad Specifications Pad Shape: P1013 / 1404 Overall Width: 132 mm Overall Height: 77 mm Friction Material Depth: 62 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1013 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers. Always compare the P1013 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1013 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1013 Brake Pads? The Race Technologies P1013 combines a 132 mm overall width with a 77 mm height and 62 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems. Distinctive Race Technologies P1013 backing plate geometry 132 mm overall width and 77 mm overall height 62 mm friction material depth Two angled friction grooves shown in the technical drawing Choice of RE10 racing or TS20 street/track compounds Race Technologies P1013 Brake Pad Fitment The Race Technologies P1013 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1013 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1013 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.

Race Technologies P1013 Brake Pads (Front) Fitment Guide Race Technologies P1013 / 1404 Brake Pad (FMSI 2487) Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Audi RS3 Sportback [8PA] 11 - 12 X Audi TT RS 2.5 Quattro 09 - 14 X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z51 14 - X Dodge Viper SRT TA (time attack) 14 - 17 X Ford GT 04 - 06 X Ford Mustang Boss 302 12 - 13 X Ford Mustang GT [4 piston Brembo] 11 - 14 X Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc] 07 - 14 X Honda Civic Type R [Brembo brakes] Gen IX and X 15 - X Hyundai Genesis Coupe 3.8 track 10 - 16 X KIA Stinger 3.3 T-GDI V6 [4 piston Brembo] 18- X Maserati Ghibli (M157) [4-piston Brembo caliper / disc ø 345mm] 13 - X Mitsubishi Lancer Evo V - Evo IX 98 - 06 X Mitsubishi Lancer Evo X 07 - 16 X Subaru STI 3rd & 4th generation 03 - 16 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo M4 in combination w/ 62mm radial disc swept depth 16mm 2487   The Race Technologies P1013 brake pad features a distinctive wide-format backing plate designed for compatible high-performance brake calipers. Measuring 132 mm wide by 77 mm high with a 62 mm friction material depth, the P1013 combines a curved friction surface with two angled friction grooves and specialized mounting features for demanding performance driving and motorsport applications. Competition Motorsport offers the Race Technologies P1013 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, selecting the correct pad shape and compound is essential for proper fitment and predictable braking performance. Race Technologies P1013 Brake Pad Specifications Pad Shape: P1013 / 1404 Overall Width: 132 mm Overall Height: 77 mm Friction Material Depth: 62 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1013 features two upper retaining holes, a gently curved upper friction edge, two angled friction grooves, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers. Always compare the P1013 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1013 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1013 Brake Pads? The Race Technologies P1013 combines a 132 mm overall width with a 77 mm height and 62 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems. Distinctive Race Technologies P1013 backing plate geometry 132 mm overall width and 77 mm overall height 62 mm friction material depth Two angled friction grooves shown in the technical drawing Choice of RE10 racing or TS20 street/track compounds Race Technologies P1013 Brake Pad Fitment The Race Technologies P1013 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 132 mm overall width, 77 mm overall height, 62 mm friction material depth, and retaining-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1013 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1013 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.

Carbotech CT1718 Brake Pads Vehicle Fitment Make Model Build (Year) Front Rear Chevrolet Camaro SS [Gen 6] 4 Piston Brembo caliper 16 - X Chevrolet Camaro SS [Gen 6] 6 Piston Brembo caliper - upgrade kit 16 - X Chevrolet Camaro SS 1LE [Gen 6] (6 piston Brembo) 16 - X Chevrolet Camaro GT4 R [race car] 17 - X Chevrolet Corvette C7 base 13 - 20 X Chevrolet Corvette C7 Z06 [iron brakes] 15 - X Chevrolet Corvette C7 Z51 14 - X Ford Mustang Shelby GT350 [6 piston Brembo caliper / 15.5 disc] 15 - X Available Carbotech Compounds 1521 — High-performance street compound with low dust, low noise, and excellent release and modulation. AX6 — Autocross-focused compound with strong low-temperature bite and progressive control. XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior. XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance. XP12 — More aggressive race compound with added bite and high-temperature capability. RP2 — Endurance racing compound designed for sustained performance and strong fade resistance. XP20 — Very aggressive racing compound with high torque and extreme heat capability. XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands. How to Choose the Right Compound 1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use. Carbotech CT1718 Brake Pads FAQs How do I know if CT1718 fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle. Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications. Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound. Choose the Carbotech CT1718 compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.