C3 Carbon
C3 Carbon McLaren MP4-12C-650S Carbon Fiber Coolant Tank Cover (Smooth)
$599.00
C3 Carbon McLaren MP4-12C/650S Carbon Fiber Coolant Tank Cover (Smooth)
FITMENT:
McLaren MP4-12C (2012-2014)
McLaren 650S (2015-2016)
Add beauty to your McLaren's engine bay with a new carbon fiber coolant tank cover from C3 Carbon. A direct replacement for the factory part on the McLaren MP4-12C or 650S, this beautifully finished and easy to install carbon fiber piece adds a bit of drama that reflects the McLaren's racing heritage.
C3's autoclaved, pre-impregnated dry carbon fiber cover is engineered for a perfect fit and is finished flawlessly. C3 has matched the OEM McLaren 3K, 2x2 twill weave for a factory-original McLaren appearance. With the engine on display, the 12C and 650S really need carbon in the engine bay! Choose between brilliant high gloss or satin clear finishes.
This part can also be purchased as part of a complete McLaren Engine Bay Carbon Package!
FEATURES:
Autoclaved pre-preg dry 3K carbon fiber with 2x2 twill weave matched to McLaren OEM carbon fiber
Clear-coated with automotive urethane
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon McLaren MP4-12C-650S Carbon Fiber Coolant Tank Cover (Ribbed)
$649.00
C3 Carbon McLaren MP4-12C/650S Carbon Fiber Coolant Tank Cover (Ribbed)
FITMENT:
McLaren MP4-12C (2012-2014)
McLaren 650S (2015-2016)
Add visual flair to your McLaren's engine bay with a new carbon fiber coolant tank cover from C3 Carbon. A direct replacement for the factory part on the McLaren MP4-12C or 650S, this beautifully finished and easy to install carbon fiber piece adds a bit of drama that reflects the McLaren's racing heritage.
C3's autoclaved, pre-impregnated dry carbon fiber cover is engineered for a perfect fit and is finished flawlessly. C3 has matched the OEM McLaren 3K, 2x2 twill weave for a factory-original McLaren appearance. Choose between brilliant high-gloss or satin clear finishes.
This part can also be purchased as part of a complete McLaren Engine Bay Carbon Package!
FEATURES:
Autoclaved pre-preg dry 3K carbon fiber with 2x2 twill weave matched to McLaren OEM carbon fiber
Clear-coated with premium automotive urethane
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon McLaren MP4-12C Carbon Fiber Shift Paddles
$449.99
C3 Carbon McLaren MP4-12C Carbon Fiber Shift Paddles
Enhance the beauty of your MP4-12C cockpit with C3 Carbon shift paddles. C3's autoclaved, pre-impregnated dry carbon cfiber shift paddles install easily and fit perfectly, bringing you the beauty of carbon fiber every time you drive your McLaren.
C3 has matched the OEM McLaren 3K twill weave for a perfect original factory appearance. Easy installation using incredibly strong 3M VHB 5952 double-sided tape makes this a must-have for any 12C owner.
All 2012-15 McLaren MP4-12C models
FEATURES:
Autoclaved pre-preg dry 3K carbon fiber with OEM McLaren-matched twill weave.
Clear-coated with automotive urethane, hand polished to a mirror finish
Precise fit without any modification
Installs in minutes using 3M VHB (Very High Bond) double-sided tape
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon McLaren Carbon Fiber Intake Housing
$749.99
C3 Carbon McLaren MP4-12C/650S/570S Carbon Fiber Intake Housing Cover
Add visual flair to your McLaren's engine bay with a new carbon fiber Intake Housing Cover from C3 Carbon. A direct replacement for the factory part on the McLaren MP4-12C, 650S, and 570S, this beautifully finished and easy to install carbon fiber piece really helps make the McLaren's motor visually pop.
C3's autoclaved, pre-impregnated dry carbon fiber cover is engineered for a perfect fit and is finished flawlessly. C3 expertly matches the OEM McLaren 3K, 2x2 Twill weave for a factory-original McLaren appearance. Choose high gloss or satin finish.
This can also be purchased as part of a complete McLaren engine bay carbon package.
FITMENT:
2012 - 2014 MP4-12C
2015 - 2016Â 650S
2016+Â Â 570S
FEATURES:
Autoclaved pre-preg dry 3K carbon fiber with 2x2 twill weave matched to McLaren OEM carbon fiber
Clear-coated with premium automotive urethane
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products:
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
