Porsche 911 Carrera S (996)

CMS Performance RF1 DOT4 Racing Brake Fluid Real-Life High Boiling Point Without The Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid. RF1 Racing Brake Fluid Details: Typical dry boiling point: 328º C (622º F) Typical wet boiling point: 204º C (399º F) Exceeds DOT3 & DOT4 standards Bottle size: 500 ml (16.9 fl oz) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Girodisc Brake Pad Spreader This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Insert the spreading plates one way for wider six-piston calipers, then turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. The Girodisc Brake Pad Spreader will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.

    Fits These Vehicles: Make Model Build (Year) Front Rear Porsche 996 3.4 C & 3.6 97 - 05 X   Porsche 996 3.4 C Cup 99 - 01   X Porsche 996 3.4 C Cup 97 - 98   X Porsche 996 3.6 C 4S 03 - 05   X Porsche 996 GT2 02 - 05   X Porsche 996 GT3 02 - 05   X Porsche 996 GT3 99 - 01   X Porsche 996 GT3 Cup 02 - 05   X Porsche 996 GT3 RS [street car] 03 - 05   X Porsche 996 Turbo 99 - 05   X Porsche 997 3.6 C & 3.6 C4 05 - 09 X   Porsche 997 3.8 C S & 3.8 C 4S 05 - 12   X Porsche 997 3.8 Carrera GTS 09 - 11   X Porsche Boxster [987] [ceramic brakes] 05 - 12   X Porsche Boxster S [986] 99 - 05 X   Porsche Boxster S [987] 05 - 12 X   Porsche Cayman [987] 09 - 12 X   Porsche Cayman [987] [ceramic brakes] 06 - 12   X Porsche Cayman R [987] (none ceramic) 10 - X   Porsche Cayman S [981] [ceramic brakes] 13 -   X Porsche Cayman S [987] 06 - 12 X   RSL 29: The PAGID RS29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 14: The PAGID RS14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RS 44: The PAGID RS44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2.

PFC 11 COMPOUND A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 COMPOUND One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. FITMENT (Iron Rotors Only) Most Porsche 986, 987, 996, and 997 Front Calipers

Performance Friction PFC Brake Pads 7818.XX.17.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge Porsche Cup Racing, and Pirelli World Challenge. With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs. PFC 11 COMPOUND A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 COMPOUND One of PFC's most popular compounds which came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' endurance materials but with much higher bite and consistent performance across a broad temperature range. Porsche 996 1999-05 GT3 R / GT3 RS Porsche 996 3.4 litre 1998-04 C2 / C4 S Porsche 996 3.4 litre 1998-04 C Super-Cup Porsche 996 3.6 litre 2002-2005 Turbo 996T Porsche 997 3.8 litre 2005-12 C2 / C4 S Porsche 997 3.8 litre 2009-12 Carrera GTS

  Fits These Vehicles: Make Model Build (Year) Front Rear Porsche 996 3.4 C Cup 99 - 01 X   Porsche 996 3.6 C 4S 03 - 05 X   Porsche 996 GT3 99 - 01 X   Porsche 996 Turbo 99 - 05 X   Porsche 997 3.8 C S & 3.8 C 4S 05 - 12 X   Porsche 997 3.8 Carrera GTS 09 - 11 X     RSL 29: The PAGID RS29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 14: The PAGID RS14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying.