488 GTB

Ferrari 398mm Front Rotors Girodisc 398mm front rotors bring race-level braking performance to your Ferrari, replacing the stock carbon-ceramic setup with a durable, serviceable iron system. Designed as a direct-fit solution, these rotors require no modifications and work seamlessly with the factory calipers once fitted with brake pads that feature a 66mm swept area or less. The result is a lighter, cooler-running system that delivers exceptional pedal feel and fade resistance on both street and track. Each Girodisc rotor is crafted in the USA using a combination of 6061-T6 aluminum hats and proprietary high-carbon cast-iron rings. The internal curved vane design actively pumps air through the rotor to dissipate heat under extreme braking, ensuring consistent performance lap after lap. Track-Tested Iron Replacement for Carbon-Ceramic Rotors Vehicle Fitment Ferrari 458 Italia / 458 Speciale Ferrari 488 GTB / Pista Ferrari F8 Tributo Ferrari California T (with 398mm front rotor option) Features Direct OEM replacement: Fits stock calipers; designed for use with pads featuring ≤66mm annulus. Optimized performance: Offers consistent, confident braking in place of heavier CCM rotors. Curved vane ventilation: Centrifugal air channels actively cool rotors under hard braking. Floating 2-piece design: Uses cadmium-plated hardware to allow thermal float and prevent distortion. Serviceable construction: Replace only the iron rings for cost-effective long-term maintenance. Made in the USA: Fully designed, cast, and machined in-house by Girodisc. Girodisc A1-111 FAQs Do these rotors fit OEM Ferrari calipers? Yes. They’re a direct-fit replacement for factory carbon-ceramic discs when using pads with ≤66mm annulus. Can I use standard pads? You’ll need pads with a smaller swept area—common on many 6-piston Brembo-style calipers. Girodisc can recommend compatible compounds. Are they lighter than the factory setup? Yes. Despite being iron, the design maintains a manageable weight while offering more consistent thermal performance. Will they make noise like other floating rotors? No. Girodisc’s anti-noise spring washers allow float without rattling. How are they sold? Sold and priced per pair. Upgrade your Ferrari’s braking performance and reliability with Girodisc 398mm front rotors—engineered to perform, cool, and endure where carbon-ceramics fall short.

Girodisc Ferrari 458, F12, FF, GTC4Lusso Rear Rotors Girodisc rear rotors for Ferrari’s most celebrated V8 and V12 models offer precision braking performance worthy of Maranello’s finest. Engineered as a direct OEM replacement, these rotors reduce unsprung weight, enhance heat control, and deliver a more consistent pedal feel under high-speed braking. Vehicle Fitment Ferrari 458 Italia / 458 Spider / 458 SpecialeFerrari F12berlinettaFerrari FFFerrari GTC4LussoCompatible with OEM calipers and factory hardware. Precision Engineering, Race-Inspired Design The Girodisc system bolts directly to the factory hubs—no modifications required. Each two-piece rotor combines a U.S.-sourced 6061-T6 aluminum hat with Girodisc’s proprietary cast-iron friction ring, providing superior heat management and durability. The curved vane design acts as a centrifugal pump, moving cooling air through the rotor to stabilize temperatures during aggressive driving. This advanced construction ensures consistent brake torque and extended component life, whether on the street or circuit. Features • Direct OEM replacement – no adapters or modifications required• 6061-T6 billet aluminum hats, hard-anodized for corrosion resistance• Proprietary cast-iron friction rings, cast and machined in the USA• Floating mount system with cadmium-plated steel drive pins• Anti-noise spring washers prevent rattle while maintaining float• Curved vane internal design enhances airflow and cooling efficiency• Reduces unsprung mass for improved handling response• Fully rebuildable—replace only the friction rings when worn• Sold/priced per pair Girodisc A2-111 Rear Rotor FAQs: Are these rotors compatible with both V8 and V12 Ferrari models? Yes. They fit the 458, F12, FF, and GTC4Lusso using factory hardware and OEM calipers with no modifications required. Will these work with factory carbon ceramic brakes? No. These are designed for vehicles originally equipped with iron rotors. For PCCB conversions, a specific Girodisc kit is required. Do they improve braking feel? Absolutely. Expect better modulation, faster heat recovery, and improved pedal consistency thanks to reduced rotational mass and optimized cooling. Are they suitable for track use? Yes. Girodisc rotors are engineered to handle repeated high-temperature cycles typical of spirited track driving or heavy road use. Experience race-level braking performance in your Ferrari with Girodisc’s lightweight rear rotors—precision-built to balance power, control, and refinement.

A1-111 Girodisc Two-Piece 398mm Front Brake Rotors (Discontinued Design) Fitment (FRONT): Ferrari 458 Italia Ferrari 488 Ferrari 488 Pista Ferrari F8 Discontinued New old stock rotor.  These have the straight grooves as images show, not the new curved grooves.  Final Sale, no returns or exchanges. Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement1 for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than traditional cast iron brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 racing brake fluid, you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: These Girodisc rotors have a different annulus (pad swept area) than the OEM CCM rotors, to maintain their light weight. A brake pad with an annulus of 66mm or less must be used with these Girodisc rotors. The necessary pad shape is very common, found on the Nissan GT-R, Cadillac CTS-V, and most AMG Mercedes equipped with six-piston calipers. If there's a specific pad and/or compound you're after please, contact us at (844) 438-7244 and we'll get you what you need!

Girodisc A2-111 Two-Piece Rear Brake Rotors (Discontinued Design) Discontinued New old stock rotor.  These have the straight grooves as images show, not the new curved grooves.  Final Sale, no returns or exchanges. Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The two-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rotors are lighter than OEM Ferrari parts. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid, you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotor's curved vane design was developed in racing, acting as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA and cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair.

Pagid Racing Brake Pads No. 4580 Fits the Following Vehicles: Make Model Build (Year) Front Rear Ferrari 458 Speciale [ceramic brakes] 2013 - X Ferrari 488 [ceramic brakes] 2015 - X Ferrari 488 Pista [ceramic brakes] 2018 - X Ferrari F8 Tributo [ceramic brakes] 2019 X Fits the Following Caliper: Make Type Remarks Shape No. Brembo Extrema 6-piston 15.25mm 4580 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.

Pagid Racing Brake Pad Shape No. 4581 Fits These Vehicles: Make Model Build (Year) Front Rear Ferrari 458 Speciale [ceramic brakes] 2013 - X Ferrari 488 [ceramic brakes] 2015 - X Ferrari 488 Pista [ceramic brakes] 2018 - X Ferrari F8 Tributo [ceramic brakes] 2019 X Fits the Following Caliper: Make Type Remarks Shape No. Brembo Extrema 4-piston 15mm 4581 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.

Girodisc Ferrari 398mm Front Replacement Rings Restore peak braking performance on your Ferrari with Girodisc 398mm front replacement rings. These high-carbon iron friction rings are designed to bolt directly to your existing Girodisc two-piece rotor hats, offering a precise fit and consistent stopping power for both street and track applications. Vehicle Fitment Compatible with:• Ferrari 458 Italia• Ferrari 458 Speciale• Ferrari 488 GTB / Spider• Ferrari F8 TributoNote: These are replacement rings only. They attach directly to your existing Girodisc aluminum hats using the included hardware. Track-Ready Performance and Quality Each Girodisc 398mm replacement ring is cast and machined in the USA using a proprietary high-carbon iron alloy that delivers superior heat stability and minimal distortion under extreme braking. The directional curved vane design acts as a centrifugal air pump, dramatically improving cooling efficiency and fade resistance. Whether you’re on the street or at the track, Girodisc ensures consistent pedal feel and reliable braking lap after lap. Features • Direct replacement for 398mm Girodisc front rotor assemblies• Compatible with OEM Ferrari calipers• High-carbon cast iron improves thermal stability and wear resistance• Curved vane internal design for optimal cooling• Precision balanced and machined in the USA• Includes complete new hardware kit• Sold/priced per pair Specifications • Diameter: 398mm• Position: Front• Material: High-carbon cast iron• Includes new hardware• Made in the USA• Sold/priced per pair Girodisc D1-111 Replacement Ring FAQs Do these fit the OEM Ferrari carbon-ceramic setup? No, these replacement rings are designed only for Girodisc two-piece iron conversions. OEM carbon-ceramic systems require a full iron-conversion kit. Will these work with my factory calipers? Yes, these are engineered to retain the OEM Ferrari calipers and maintain proper brake bias and pedal feel. Are new hats required? No. The Girodisc two-piece system allows re-use of your aluminum hats, making future rebuilds more cost-effective. Do the rings include hardware? Yes, each pair includes new floating pin and bolt hardware for proper installation. Refresh your Ferrari’s braking performance with Girodisc D1-111 398mm front replacement rings — engineered for precision, cooling efficiency, and endurance-grade reliability.

D1-111 Girodisc Rear Replacement Rotor Rings FITS: FERRARI 458 ITALIA and 488 GTB REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc replacement rotor system is a direct rotor disc replacement for the Girodisc 2-piece hat and rotor and no modifications are necessary. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from heavy braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece Girodisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.