CMS Performance RF1 DOT4 Racing Brake Fluid (500 ml) - Competition Motorsport
Competition Motorsport CMS Performance RF1 DOT4 622ºF Racing Brake Fluid from $21.95
CMS Performance RF1 DOT4 Racing Brake Fluid Real-Life High Boiling Point Without The Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid. RF1 Racing Brake Fluid Details: Typical dry boiling point: 328º C (622º F) Typical wet boiling point: 204º C (399º F) Exceeds DOT3 & DOT4 standards Bottle size: 500 ml (16.9 fl oz) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!
Girodisc Brake Pad Spreader GDPS01 - Competition Motorsport
Girodisc Girodisc Brake Pad Spreader GDPS01 $250.00
Girodisc Brake Pad Spreader This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Insert the spreading plates one way for wider six-piston calipers, then turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. The Girodisc Brake Pad Spreader will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.
Pagid Racing Brake Pads No. 2487 - Competition Motorsport
Pagid Pagid Racing Brake Pads No. 2487 from $360.95
 Fits These Vehicles: Make Model Build (Year) Front Rear Alfa Romeo Giulia 2.9 [952] 15 -   X Aston Martin DB 9 04 - X   Aston Martin Vantage V8 GT4 ProDrive [race car] 12 - X   Audi RS3 Sportback [8PA] 11 - 12 X   Audi TT RS 2.5 Quattro 09 - 14 X   Cadillac CTS-V (4 piston front caliper) 03 - 09 X   Chevrolet Camaro SS 09 - 15 X   Chevrolet Camaro SS - 4 Piston Brembo caliper 16 - X   Chevrolet Corvette Brembo 6 piston non ceramic 09 -   X Chevrolet Corvette C7 base 14 - X   Chevrolet Corvette C7 Z51 14 - X   Dodge Viper SRT TA (time attack) 14 - X X Ford GT 04 - 06 X X Ford Mustang Boss 302 12 - 13 X   Ford Mustang GT [4 piston Brembo] 15 - X   Ford Mustang Shelby GT500 [4 piston Brembo caliper / 15" disc] 07 - 14 X   Honda (Acura) Acura TL 04 - X   Honda (Acura) Civic IX Type R [Brembo brakes] 15 - X   Hyundai Genesis Coupe 3.8 track 10 - X   Maserati Ghibli (M157) [4 piston Brembo caliper / disc ø 345mm] 13 - X   Mitsubishi Lancer Evo V - Evo IX 98 - 06 X   Mitsubishi Lancer Evo X 07 - 16 X   Renault Mégane III 2.0 RS [Brembo brakes] without electronic hand brake 08 - X   Subaru STI 3rd & 4th generation 03 - 16 X   Volvo S60 Turbo R Brembo brakes 03 - X   Volvo V70 R 2.5T Brembo brakes 03 - X   RSL 29: The PAGID RS29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 14: The PAGID RS14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL1: PAGID RSL1 has a high ceramic content with superior thermal insulation and higher heat resistance than metallic pad compounds. They feature excellent pad wear under endurance conditions, excellent rotor life, and are less aggressive than RST pads with excellent brake balance and modulation.
MP-1001-2 Girodisc Magic Pads (Front) - Competition Motorsport
Girodisc MP-1001-2 Girodisc Magic Pads (Front) $95.00
GiroDisc "Magic Pads" are the solution to your squeaky, dusty, expensive factory replacement pads. They have lower dust than typical factory pads and much less than other performance pads. You won't be cleaning your wheels nearly as often! Additionally, they have great initial bite, something most less-expensive pads lack. But the real reason people like Magic Pads so much is they are the "silver bullet" to brake noise problems. Magic Pads are a semi-metallic composition that is easy on rotors and on your wallet. We recommend always replacing pads as a whole car set when switching compounds. All Magic Pads come with anti-noise shields pre-installed and included in the price. If you have any questions, give us a call at (844) 438-7244. We're happy to help!
Sold out
SS-1001  Girodisc S-S Pads (Front)
Girodisc SS-1001 Girodisc S-S Pads (Front) $120.00
The Girodisc S/S or "street/strip" pads represent the ultimate in high performance brake pads. The semi-metallic compound maintains a consistent coefficient of friction from 0o to 1000o F, making them an ideal option for people who are looking for a dual-purpose pad that works really well on both the street and the race track. The formula has very little compressibility, ensuring a very firm pedal and immediate bite and making the S/S pads a favorite among autocrossers and drivers who demand the most out of their street cars. Inevitably, these will dust more than Girodisc Magic Pads, but with the Girodisc anti-noise shims that come on every set of pads they will not make any noise if they are bedded-in properly. We recommend always replacing pads as a whole car set when switching compounds. All S/S pads come with anti-noise shims pre-installed and included in the price. If you have any questions, give us a call at (844) 438-7244. We're happy to help!
D1-007 Girodisc Front Replacement Rotor Rings (Subaru STI 2004+) - Competition Motorsport
Girodisc D1-007 Girodisc Front Replacement Rotor Rings (Subaru STI 2004+) $600.00
FITS: SUBARU STi 2004-2016 REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.
SS-0961 Girodisc S-S Pads (Rear)
Girodisc SS-0961 Girodisc S-S Pads (Rear) $85.00
The Girodisc S/S or "street/strip" pads represent the ultimate in high performance brake pads. The semi-metallic compound maintains a consistent coefficient of friction from 0o to 1000o F, making them an ideal option for people looking for a dual-purpose pad that works really well on both the street and the race track.  The formula has very little compressibility, ensuring a very firm pedal and immediate bite and making the S/S pads a favorite among autocrossers and drivers who demand the most out of their street cars. Inevitably, these will dust more than Girodisc Magic Pads, but with the included anti-noise shims that come on every set of pads, they will not make any noise when bedded-in properly. We recommend always replacing pads as a whole car set when switching compounds. All Girodisc S/S come with anti-noise shields pre-installed and included in the price. If you have any questions, give us a call at (844) 438-7244. We're happy to help!
Pagid Racing Brake Pads No. 1587 - Competition Motorsport
Pagid Pagid Racing Brake Pads No. 1587 from $242.92
Fits These Vehicles: Make Model Build (Year) Front Rear Hyundai Genesis Coupe 3.8 track 10 -   X KTM X-Bow 08 -   X Mitsubishi Lancer Evo V - Evo IX 98 - 06   X Nissan 350Z Coupe Track 02 -   X Nissan Skyline GTR 89 - 95   X Subaru STI 3rd & 4th generation 03 - 16   X Fits These Calipers: Make Type AP Racing CP5119 D50 Brembo 07.4180. [caliper family E] StopTech ST22 RSL 29: The PAGID RS29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 14: The PAGID RS14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying.  
D2-007 Girodisc Rear Replacement Rotor Rings (Subaru STI 2004-2007) - Competition Motorsport
Girodisc D2-007 Girodisc Rear Replacement Rotor Rings (Subaru STI 2004-2007) $600.00
FITS: SUBARU STi (2004-2007) REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.
A2-007 Girodisc 2pc Rear Brake Rotors (Subaru STI 2004-2007) - Competition Motorsport
Girodisc A2-007 Girodisc 2pc Rear Brake Rotors (Subaru STI 2004-2007) $900.00
FITS: SUBARU STi (2004-2007) **MINOR ARCHING OF THE REAR OUTBOARD PAD WILL BE REQUIRED DUE TO THE TIGHT TOLERANCES.** Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc.  The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly.  By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.  The Giro Disc rotors are lighter than OEM pieces.  The reduction in rotational and unsprung weight (7 lbs per corner) allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.
A1-007 Girodisc 2pc Front Brake Rotors (Subaru STI 2004+) - Competition Motorsport
Girodisc A1-007 Girodisc 2pc Front Brake Rotors (Subaru STI 2004+) $900.00
Girodisc A1-007 Front Rotors for Subaru STI (2004+) FITS: Subaru STI 2004+ (front) Competition Motorsport is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece floating rotor design will bolt directly to the Subaru STI front and work flawlessly with OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response. Combined with Pagid or PFC performance brake pads and Competition Motorsport RF-1 brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa