Sparco Martini Racing Collection

Sparco Air Pro RF-5W Martini Racing Helmet Spectacular limited edition Sparco Air Pro RF-5W features a beautiful Martini Racing paint scheme With its strong Carbon-Kevlar reinforced fiberglass shell, the Sparco RF-5W provides superior levels of comfort and safety. The Martini Racing livery takes the design of this phenomenal helmet to the next level. As a limited-edition Sparco exclusive, this helmet sets itself apart from any other in the paddock. Inside the helmet, the EPS padding and linings can be removed for washing, and can be re-positioned for more personalized fit and comfort. The helmet features exceptional ventilation with grilles on the front chin bar and six ducts on the top and back, keeping the driver cool and dry in the heat of racing. The RF-5W can also accommodate a drinking/hydration system. The visor features a center-positioned locking tab with a continual adjustment. Available in two different shell sizes (one for Small through Med-Large, another for Large on up) in order to get you the perfect fit. The Air Pro RF-5W Martini Racing helmet is supplied with factory fitted FHR / HANS posts. FIA 8859-2015 and Snell SA2015 approved. FEATURES Limited edition Martini Racing color scheme Strong and lightweight Carbon Kevlar reinforced shell Excellent ventilation to help keep you cooler and more focused FIA 8859-2015 and Snell SA2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. This helmet will ship to you with signature required for delivery.

Sparco Martini Racing Fire Suit In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing replica suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability and comfort when compared to the original. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica suit is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and a large lower back stretch panel for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and the Sparco signature epaulettes.  Available in sizes 48-66. FIA approved. TECHNOLOGY AND FEATURES: Martini Racing embroideries Lightweight Three-layer Fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA approved

Sparco Pro 2000 QRT Martini Racing Seat SIZE: Medium, up to a 34” waist (as measured)  The Pro 2000 QRT Martini Racing Edition is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT Martini Edition is a unique FIA seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options. EVOLUTION OF AN ICON The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches.  The Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT is FIA approved.  WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved DIMENSIONS

Sparco Air Pro 1977 SNELL SA2020 The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of the new Snell SA2020 and FIA 8859-2015 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact. AIR PRO 1977 The Air Pro 1977 is a painted version of the Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes and has a clear coat painted over. The Air Pro 1977 features a carbon-Kevlar/fiberglass construction. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Air Pro 1977 has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro 1977 has been designed to accommodate a drink tube and an intercom system. Available in white with blue or red stripes. Sizes XS to XXL (including size M/L). Air Pro 1977 has Hans clips pre-installed. SNELL SA2020 and FIA 8859-2015 approved. TECHNOLOGY Painted Retro design Light-weight carbon-Kevlar/fiberglass construction New Medium/Large size which uses the lighter and more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system SNELL SA2020 and FIA 8859-2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest.

Sparco Martini Racing Top Shoe In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing Top shoe is made with high-quality suede and is embroidered with the classic Martini Racing stripes. It offers superior fire protection, breathability and comfort when compared to the original. The Martini Racing Top shoe features a wide Velcro strap for greater ankle support and guaranteed fit and hold. The outer sole is anti-static and oil/fuel resistant and utilizes anti-slip technology for greater pedal feel. A balance point on the heel improves driving sensitivity. Available in black, blue and red in sizes from 37 to 48. The Martini Racing Top is FIA approved. FEATURES: Martini Racing embroidery Suede upper with adjustable ankle strap Breathable lining Balance point at the heel for improved comfort while driving Sole design allows for both maximum comfort and pedal grip Anti-static, fuel- and oil-resistant sole FIA approved

Sparco Martini Racing Land Nomex Glove In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing Land glove provides excellent protection and feedback. The classic design features Martini Racing and Sparco logos in “period correct” embroidered patches. The palm features an ergonomic design with reinforced stitching that conforms to the hand’s position. The glove has anti-slip suede fingertips and provide grip and feedback. The elastic wrist and wide range of sizes helps ensure proper fitment. Colors: Navy or Red. The Martini Racing Land is FIA approved. TECHNOLOGY Period-correct embroidered Martini Racing patches Ergonomic palm design with reinforced stitching conforms to the hand’s position Suede grip for finger tips and palm Elastic wrist support FIA approved

Sparco Martini SL-17 Shoe The SL-17 shoe is designed for the ultimate street performance.  It features a thin sole for maximum pedal feel and control.  This sole continues up the back of the heel to provide a smooth and stable point for heel-toe shifting.  The SL-17's are avaialble n sizes from 36 to 46. TECHNOLOGY Lightweight leather upper for unbelievable comfort Thin sole gives maximum pedal feel Back heel provides a smooth and stable pivot point for heel-toe shifting