Aventador

Lamborghini Aventador Front Rotors The Girodisc two-piece floating front rotor upgrade is a precision-engineered replacement for the factory discs on all Lamborghini Aventador models. Designed for direct fitment with no modifications required, these rotors bolt straight to the OEM calipers, maintaining factory brake balance and ABS functionality while delivering massive gains in thermal efficiency, cooling, and durability. By replacing the stock one-piece rotors with Girodisc’s lightweight two-piece design, you’ll shed unsprung weight for sharper steering feedback and faster suspension response. Each rotor features a 6061-T6 aluminum hat paired with Girodisc’s proprietary cast-iron rotor rings—poured, machined, and finished entirely in the USA. The directional curved vane system acts as a centrifugal pump, pulling cool air through the disc to minimize fade and ensure consistent braking performance during high-speed track sessions or aggressive canyon runs. Precision-Built Performance Vehicle Fitment Lamborghini Aventador LP700-4 Lamborghini Aventador S / SV / SVJ Girodisc A1-119 Features Direct OEM replacement: Bolts directly to stock calipers with no adapters or modifications. Curved vane internal design: Actively pumps cooling air through the disc for exceptional heat management. Floating mount hardware: Uses cadmium-plated steel drive pins and anti-noise washers to allow thermal expansion without rattle. Lightweight construction: Reduces unsprung and rotational mass for better handling and response. Serviceable two-piece system: Replace only the cast-iron rings when worn—reuse the aluminum hats for long-term savings. Made in the USA: 100% designed, cast, and machined domestically for ultimate precision and quality control. Girodisc A1-119 FAQs Will these fit the stock Aventador calipers? Yes. The Girodisc rotors are a direct bolt-on replacement that works perfectly with OEM calipers. Do these rotors reduce weight? Absolutely. The two-piece design sheds unsprung weight compared to the factory setup, improving handling and acceleration. Are these rotors suitable for track use? Yes. The curved vane design and floating mount system are proven under extreme track temperatures. Do they affect brake balance or ABS? No. Girodisc rotors retain factory bias and full ABS functionality. How are they sold? Sold and priced per pair. Upgrade your Lamborghini Aventador’s braking performance with Girodisc front rotors—precision-crafted, race-proven, and engineered to outperform the factory setup both on the street and the circuit.

Girodisc Lamborghini Aventador Rear Rotors Developed for one of the most demanding supercars ever built, Girodisc rear rotors for the Lamborghini Aventador deliver exceptional heat control, lower weight, and improved braking consistency. These rotors are a direct OEM replacement, engineered for drivers who expect race-level precision with factory refinement. Vehicle Fitment Lamborghini Aventador LP700-4 (2011–2016)Lamborghini Aventador S (2017–2020)Lamborghini Aventador SV / SVJ (2016–2022)Compatible with OEM Brembo rear calipers and hardware. Engineered for Supercar-Level Braking The Girodisc system bolts directly to factory hubs—no modifications required. Each two-piece rotor features a lightweight 6061-T6 aluminum hat mated to Girodisc’s proprietary cast-iron friction ring. The floating design allows the rotor to expand evenly under extreme temperatures, maintaining pad alignment and consistent pedal feedback. Internal curved vanes act as centrifugal pumps, drawing air through the disc to maximize cooling efficiency during high-speed braking. Features • Direct OEM replacement—no adapters or modifications needed• 6061-T6 billet aluminum hats with hard-anodized finish• Proprietary high-carbon cast-iron rings cast and machined in the USA• Floating mount system with 12 cadmium-plated steel drive pins• Anti-noise spring washers prevent rattle and ensure smooth operation• Curved vane internal design improves airflow and cooling• Lighter than OEM rotors for reduced unsprung weight• Fully rebuildable—replace only the friction rings when worn• Sold/priced per pair Girodisc A2-119 Rear Rotor FAQs: Are these rotors a direct replacement for OEM? Yes. They bolt directly to the factory hubs and calipers, maintaining OEM geometry and full compatibility with Aventador braking systems. Do these rotors affect ABS or traction control? No. Girodisc rotors preserve the original rotor dimensions and weight distribution, ensuring seamless integration with factory electronics. What benefits will I see over stock carbon or iron rotors? Girodisc rotors offer improved cooling, smoother pedal feel, and rebuildable construction—ideal for track use or high-performance street driving. Can they handle extended high-temperature operation? Absolutely. The floating design and curved vane cooling system allow these rotors to manage repeated high-speed stops without fade or distortion. Bring race-proven precision to your Aventador with Girodisc rear rotors—crafted for strength, serviceability, and supercar-worthy braking performance.

Girodisc Lamborghini Aventador Rear Replacement Rings Refresh the braking power of your Lamborghini Aventador with Girodisc D2-119 380mm rear replacement rings. These high-performance rings are designed as direct replacements for Girodisc two-piece rotors, attaching seamlessly to your existing Girodisc aluminum hats with the included floating hardware kit. Replace only the wear surface while retaining your precision-machined hats for consistent braking performance and reduced operating costs. Vehicle Fitment Compatible with:• Lamborghini Aventador LP700-4 (rear)• Lamborghini Aventador S (rear)• Lamborghini Aventador SV / SVJ (rear)Note: For vehicles equipped with Girodisc 380mm two-piece rear rotor systems. Not compatible with OEM or carbon-ceramic rotors. Features • Sold as a left/right pair and includes full hardware kit• Direct replacements for Girodisc 380mm two-piece rear rotors• CNC-machined from proprietary high-carbon cast iron• Directional curved vanes optimize airflow for improved cooling• Maintains OEM brake bias and ABS calibration• Designed exclusively for Girodisc aluminum hats – not compatible with OEM or other brands Specifications • Diameter: 380mm• Position: Rear• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rings and full hardware kit• Sold/priced per pair Girodisc D2-119 Replacement Ring FAQs Will these fit OEM Lamborghini rotors? No. These are designed for Girodisc two-piece rotor systems only and are not compatible with factory carbon-ceramic or steel rotors. Are both sides included? Yes. Each D2-119 kit includes both left and right replacement rings with a complete hardware kit. Why replace just the rings instead of the entire rotor? Replacing only the rings retains your Girodisc hats, saves cost, and restores braking performance without the need for a full rotor assembly. Do I need to use the new hardware? Yes. Always use the included new hardware to ensure proper fitment, torque, and safety. Upgrade your Lamborghini Aventador braking system with Girodisc D2-119 380mm rear replacement rings — engineered for precision, heat control, and fade-free braking performance on both street and track.

Pagid Racing Brake Pad Shape No. 4937 Fits the Following Vehicles: Make Model Build (Year) Front Rear Audi S6 [ceramic brakes] 12 - X Audi S7 [ceramic brakes] 12 - X Bentley Continental GT [ceramic brakes] 11 - X Bentley Mulsanne [ceramic brakes] 10 - X Lamborghini Aventador LP700-4 [ceramic brakes] 11 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

Pagid Racing Brake Pad Shape No. 4906 Fits the Following Vehicles: Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Dodge Viper ACR [ceramic brakes] 14 - 17 X Ferrari 360 Challenge Stradale [ceramic brakes] 03 - 05 X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Enzo [ceramic brakes] 02 - 04 X Ferrari F430 [ceramic brakes] 05 - 10 X Ferrari Several ceramic brakes CCM X Lamborghini Aventador LP700-4 [ceramic brakes] 11 - X Lamborghini Several ceramic brakes X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. These Pagid Racing Brake compounds are for ceramic rotors only. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

Girodisc Brake Pad Spreader The Right Tool for the Job This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Built Like a Tank. Works Like a Charm. Insert the spreading plates one way for wider six-piston calipers, or turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. It will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.

CMS Performance RF1 DOT4 Racing Brake Fluid Real Life 622º Boiling Point Without the Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 622º F / 328º C, RF1 exceeds all DOT 3 & DOT 4 requirements and is compatible with all DOT 3, DOT 4, and DOT 5.1 fluids. Note: RF1, like all DOT 4 brake fluids, is not compatible with DOT 5 silicone-based or any mineral-based brake fluids. On the race track, there is perhaps no single safety system more important than your brakes. No single part of that system is more critical than brake fluid, given the extraordinarily high temperatures it operates under. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. We found more than a few brands whose product was all hype and not high performance. No Hype. All Performance. No Kidding. So we did something about it. CMS Performance RF1 is manufactured in partnership with Orthene, maker of the also-excellent Halo P1 racing brake fluid and a brake fluid supplier to many racing teams in Formula 1, WEC, and other professional series. RF1 was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend a lot more on brake fluid, but it's hard to find higher-performance than RF1 Racing Brake Fluid. CMS Performance RF1 Racing Brake Fluid Details: Manufacturer: CMS Performance Manufacturer part no.: CMSRF1 Typical dry boiling point: 622º F / 328º C Typical wet boiling point: 399º F / 204º C Exceeds DOT 3 & DOT 4 standards Bottle size: 500 ml (16.9 fl. oz.) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!