Early Black Friday Deals

Sparco Script T-Shirt Track-Inspired Heritage in a Clean, Everyday Crewneck The Sparco Script T-Shirt brings casual motorsport energy to your daily rotation. With its clean crewneck design, subtle Sparco branding, and Italian-made cotton blend, it’s a shirt built for comfort and designed for racing fans who appreciate the finer details—no nonsense, just pure paddock-ready style. Sparco Script T-Shirt Features Minimalist Vintage Design: A clean-cut crewneck tee with just enough to rep your racing roots without screaming it. Tri-blend Comfort: Made from a tri-blend of 60% Poly, 25% Rayon, 15% Ringspun Cotton, it’s soft, breathable, and moves with you. European Fit: a modern silhouette. If you're used to U.S. sizing, consider going one size up for a more relaxed fit. Made in Italy: Crafted with the same precision you'd expect from Sparco's racewear—because even off-track style should be dialed in. Available in Charcoal, Grey, Blue and Red: Four versatile colors that look just as good at the track as they do at your next car meet. Sparco Script T-Shirt FAQs Is this shirt tight-fitting? No too bad—it features a slimer European fit. Size up if you want a more relaxed feel or are in between sizes. Does this T-shirt have a pocket? No, this is a clean crewneck design with no pocket—just the Gulf logo stitched on the chest. Is the logo printed or embroidered? Printed for lightness Can I wear this casually, or is it more for track days? Both. It’s casual enough for everyday wear but sharp enough to turn heads at race events and meetups.

Sparco Handcrafted T-Shirt Track-Inspired Heritage in a Clean, Everyday Crewneck The Sparco Handcrafted T-Shirt brings casual motorsport energy to your daily rotation. With its clean crewneck design, subtle Sparco branding, and Italian-made cotton blend, it’s a shirt built for comfort and designed for racing fans who appreciate the finer details—no nonsense, just pure paddock-ready style. Sparco Handcrafted T-Shirt Features Minimalist Vintage Design: A clean-cut crewneck tee with just enough to rep your racing roots without screaming it. Tri-blend Comfort: Made from a tri-blend of 60% Poly, 25% Rayon, 15% Ringspun Cotton, it’s soft, breathable, and moves with you. European Fit: a modern silhouette. If you're used to U.S. sizing, consider going one size up for a more relaxed fit. Made in Italy: Crafted with the same precision you'd expect from Sparco's racewear—because even off-track style should be dialed in. Available in Charcoal: It looks just as good at the track as it does at your next car meet. Sparco Script T-Shirt FAQs Is this shirt tight-fitting? No too bad—it features a slimer European fit. Size up if you want a more relaxed feel or are in between sizes. Does this T-shirt have a pocket? No, this is a clean crewneck design with no pocket—just the Gulf logo stitched on the chest. Is the logo printed or embroidered? Printed for lightness Can I wear this casually, or is it more for track days? Both. It’s casual enough for everyday wear but sharp enough to turn heads at race events and meetups.

Titanium Wheel Lug Bolts for BMW Fits All Modern BMWs with 12x1.50 or 14x1.25 Bolts Competition Motorsport Titanium Lug Bolts come in sets of 10 for your BMW. They are machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength exceptionally light weight (45% lighter than high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for for superior strength, precision, and durability. Titanium Bolts in OEM and Plus Lengths For Wheel Spacers OEM lengths are used for cars with no added wheel spacers. Longer sizes are available for those using wheel spacers. Just choose the thickness of your spacers and we'll size the appropriate titanium lug bolts. Titanium Lug Bolt Details Grade 5 Ti-6AL-4V Titanium Alloy: Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in3 Extremely high resistance to corrosion Low heat conductivity. Note: Competition Motorsport Titanium Lug Bolts for BMW are sold in sets of ten (10) lug bolts. Two sets of lug bolts are required for one complete car.

Hub-Centric Racing Wheel Spacer Kit for BMW Fits BMW cars with the following: Bolt Pattern: 5 x 120 Center Bore: 72.6 mm Competition Motorsport premium BMW hub-centric racing wheel spacers add a much-needed wider, more aggressive stance to your BMW. The resulting wider track not only enhances aesthetics, it also improves handling and cornering grip. Competition Motorsport wheel spacers are precision CNC-machined from solid forgings of high-strength 7075-T6 aerospace-grade aluminum (stronger than 6061 aluminum). This allows us to skeletonize each spacer, machining out as much material as possible for ultra-light weight while maintaining superior strength. Then we hard-anodize them a deep black for exceptional beauty and durability. The result is the strongest, lightest, most durable spacers for your BMW! BMW Wheel Spacer Details Two hub-centric, 7075-T6 hard anodized BMW wheel spacers (5x120 bolt pattern). Precise CNC machining for perfect fit and balance. Ten high-tensile steel custom wheel bolts included. Optional Titanium wheel bolts for incredibly light weight and high strength. Choose either 14 x 1.25 or 12 x 1.50 bolt threads. Choose between 12, 15, 18, and 20mm spacers to customize the stance of your BMW sports car or sport sedan! Includes ten high-strength steel wheel bolts, or you can reduce unsprung weight with an upgrade to amazingly light and strong Titanium wheel bolts. Our Titanium lug bolts are forged from Ti-6Al-4V aerospace-grade titanium, with rolled threads for ultimate strength. They are incredibly light weight (35% lighter than steel bolts) with higher tensile strength than even high-strength steel.

Alpinestars Tech-1 Race v3 Nomex Gloves The Alpinestars Tech-1 Race v3 Nomex Gloves deliver excellent steering feel, lightweight protection, and premium driving comfort at an accessible price. Developed with construction techniques found in higher-priced racing gloves, the Tech-1 Race v3 combines a bonded aramidic fiber shell, pre-curved fingers, strategically printed silicone grip, and a full-length protective gauntlet. A minimal-seam design helps reduce bulk and pressure points, while the open cuff and 180-degree elasticated wrist allow quick entry without sacrificing a secure fit. Certified to FIA 8856-2018, the Tech-1 Race v3 provides current fire-resistant protection for competitive motorsport. Lightweight Aramidic Fiber Construction The glove’s main structure is made from flame-resistant aramidic fiber bonded for an effective balance of protection, flexibility, and comfort. Alpinestars combines lightweight materials with carefully selected construction methods to reduce overall glove weight without compromising coverage. The lighter design allows the driver to move naturally between the steering wheel, shifter, paddle controls, and cockpit switches while helping reduce fatigue during extended sessions. Pre-Curved Fingers and Palm The Tech-1 Race v3 is shaped around the natural position of the hand while gripping a steering wheel. Pre-curved fingers and a contoured palm reduce the effort required to close the hand and help prevent material from bunching in high-contact areas. This driving-specific shape promotes a more relaxed grip, allowing the driver to maintain control without unnecessary hand tension. Comfort-Focused Finger Construction Inside-stitched seams on all five fingers create a clean exterior and support dependable durability. The carefully shaped finger construction provides a close, responsive fit while maintaining the flexibility needed for steering and cockpit operation. Minimal seam placement across the glove helps reduce unnecessary material and creates a smoother connection between the hand and steering wheel. Extended Silicone Grip Printing Silicone printing extends across the palm and fingers to improve steering-wheel traction and tactile control. The grip pattern is positioned in key contact areas to help the driver maintain a secure hold during braking, cornering, shifting, and rapid steering corrections. Because the silicone is printed directly onto the glove, it provides dependable grip without the thickness of a separate palm layer. Direct Steering Feel and Control The lightweight palm and low-profile silicone print preserve sensitivity through the steering wheel. Drivers can feel steering resistance, vibration, and changes in vehicle balance while maintaining consistent traction. This combination of grip and feedback helps reduce the need to squeeze the wheel excessively, supporting improved comfort and precision over longer runs. Single-Panel Full-Gauntlet Top A full-gauntlet single-panel upper provides streamlined coverage from the hand through the extended cuff. Reducing the number of material transitions helps lower weight and creates a clean, close-fitting profile. The extended cuff provides additional protection around the wrist and supports proper overlap with the sleeve of a compatible fire-resistant racing suit. Open Cuff with 180-Degree Elasticated Wrist Alpinestars’ open-cuff design makes the Tech-1 Race v3 quick and easy to put on between sessions. A 180-degree elasticated wrist holds the glove securely once fitted without requiring a bulky external strap. The design combines easy entry in the pits with stable retention while the driver is in the car. Reduced-Weight Printed Graphics External printed design details give the glove a distinctive Alpinestars appearance without adding the weight and stiffness associated with heavier embroidered overlays. The low-profile graphics complement the glove’s lightweight construction while maintaining a professional competition look. FIA 8856-2018 Homologated Protection The Alpinestars Tech-1 Race v3 Nomex Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. The fire-resistant aramidic construction and extended cuff meet modern requirements for heat and flame protection. Drivers should verify the homologation requirements of their specific racing organization before competition. Alpinestars Tech-1 Race v3 Glove Construction Bonded flame-resistant aramidic fiber main construction Lightweight materials reduce overall glove weight Minimal-seam design improves comfort and sensitivity Inside-stitched seams on all five fingers Pre-curved fingers and palm follow the natural driving position Full-gauntlet single-panel upper construction Extended silicone printing across the palm and fingers Low-profile printed graphics reduce added weight Alpinestars Tech-1 Race v3 Glove Features Excellent steering-wheel feel and tactile feedback Silicone palm and finger grip improves control Pre-curved construction helps reduce hand fatigue Open cuff allows easy entry and removal 180-degree elasticated wrist provides secure retention Extended cuff improves wrist and sleeve coverage Lightweight construction supports natural hand movement FIA 8856-2018 homologated Alpinestars Tech-1 Race v3 Glove Specifications Manufacturer: Alpinestars Model: Tech-1 Race v3 Product Type: Nomex Auto Racing Gloves Main Material: Flame-resistant aramidic fiber Finger Construction: Pre-curved with inside-stitched seams Palm: Extended silicone grip print Upper: Single-panel full-gauntlet construction Wrist: 180-degree elasticated design Cuff: Open extended gauntlet Homologation: FIA 8856-2018 Premium Performance Without the Premium Price The Tech-1 Race v3 offers a strong combination of advanced fit, lightweight materials, secure silicone grip, and modern FIA protection. Its pre-curved shape supports natural steering control, while the minimal-seam construction and elasticated wrist improve comfort and convenience. For drivers seeking a responsive FIA-approved glove with many of the features found in Alpinestars’ higher-level models, the Tech-1 Race v3 delivers excellent performance and value. Alpinestars Tech-1 Race v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Race v3 Gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard. What material are the gloves made from?The main construction uses bonded flame-resistant aramidic fiber for protection, comfort, and reduced weight. Do the gloves have silicone palm grip?Yes. Extended silicone printing is positioned across the palm and fingers to improve grip and steering control. How do the pre-curved fingers improve comfort?The pre-curved shape follows the natural position of the hand around the steering wheel, helping reduce resistance, bunching, and fatigue. Do the Tech-1 Race v3 Gloves have a wrist strap?No. A 180-degree elasticated wrist provides secure retention without a separate adjustment strap. What is the benefit of the open-cuff design?The open cuff makes the gloves easier to put on and remove while the elasticated wrist keeps them securely positioned during driving. Why is the cuff extended?The extended gauntlet provides additional wrist coverage and proper overlap with a compatible racing suit sleeve. How should the Tech-1 Race v3 Gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excessive material at the fingertips.

Alpinestars Tech-1 Start v3 Nomex Racing Gloves The Alpinestars Tech-1 Start v3 Nomex Gloves are engineered to provide lightweight protection, precise steering-wheel control, and lasting comfort for competitive auto racing. Designed with a single upper panel and an innovative finger construction, these racing gloves reduce excess material throughout the fingers while lowering the overall weight of the glove. The streamlined design creates a close, anatomically optimized fit that is especially beneficial inside confined racing cockpits. Drivers receive improved freedom of movement, reduced bulk, and a more direct connection with the steering wheel and vehicle controls. Lightweight Single-Panel Construction The single-panel upper construction minimizes unnecessary seams and material across the glove. This helps improve flexibility and reduces potential pressure points during long races, qualifying sessions, and track days. By reducing excess fabric in the fingers, the Tech-1 Start v3 offers a more precise fit and improved dexterity without sacrificing the protection required for motorsport competition. Innovative Finger Design Box-cut fingertip construction provides a comfortable and natural finger position while helping reduce material buildup near the fingertips. The middle and ring fingers use a seamless, no-fourchette design that eliminates the traditional fabric panels between the fingers. This construction creates a less restrictive feel and allows the glove to conform more closely to the driver’s hand. The reduced bulk is particularly useful when operating steering-wheel buttons, switches, paddles, and other controls inside compact racing cockpits. Silicone Palm Grip Ergonomically positioned silicone-printed zones across the palm provide enhanced grip on the steering wheel. The strategically placed silicone helps reduce unwanted hand movement and allows the driver to maintain control without applying excessive gripping pressure. The improved grip can help reduce hand fatigue while providing a more consistent steering feel during demanding driving conditions. Extended Elasticated Cuff The close-fitting, straight cuff extends beyond the wrist to provide dependable coverage between the gloves and racing suit. An elasticated wrist allows for easy entry while helping keep the glove securely positioned once fitted. The streamlined cuff design also reduces unnecessary bulk around the wrist and fits comfortably beneath or over the cuff of a compatible racing suit. FIA and SFI-Certified Racing Protection The Alpinestars Tech-1 Start v3 Gloves are certified to FIA 8856-2018 and SFI 3.3/5 standards for use in sanctioned motorsport competition. These certifications make the gloves suitable for many professional, club-level, endurance, road-racing, and grassroots motorsport applications. Always confirm the required safety standard with your racing organization or sanctioning body before competition. Alpinestars Tech-1 Start v3 Nomex Glove Features Lightweight Nomex auto-racing glove construction Single upper panel reduces seams and overall weight Innovative finger construction reduces excess material Box-cut fingertip design for improved comfort and fit Seamless no-fourchette construction on the middle and ring fingers Anatomically optimized for confined racing cockpits Ergonomically positioned silicone palm grip zones Enhanced steering-wheel grip and control Close-fitting straight extended cuff Elasticated wrist for easy entry and a secure fit Designed to improve dexterity and reduce hand fatigue FIA 8856-2018 certified SFI 3.3/5 certified Ideal for Multiple Racing Applications The Tech-1 Start v3 is an excellent choice for drivers who need certified protection without the weight and bulk of a heavier racing glove. Its close-fitting design and silicone palm grip make it suitable for road racing, autocross, time trials, endurance racing, track days, and other forms of competitive motorsport. Why Choose the Alpinestars Tech-1 Start v3 Gloves? These gloves combine certified fire-resistant protection with a lightweight, driver-focused construction. The reduced-material finger design improves comfort and dexterity, while the silicone palm zones provide the grip needed for accurate steering input. For drivers seeking an affordable Alpinestars racing glove with FIA and SFI certification, the Tech-1 Start v3 delivers a strong balance of protection, comfort, and control. Alpinestars Tech-1 Start v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Start v3 Gloves fire resistant?Yes. These gloves are designed for auto racing and use fire-resistant materials appropriate for certified motorsport competition. What certifications do the Tech-1 Start v3 Gloves have?They are certified to FIA 8856-2018 and SFI 3.3/5 standards. What is a no-fourchette finger design?A no-fourchette design removes the traditional material panels between selected fingers. This reduces bulk and creates a closer, more anatomically optimized fit. Do these gloves have silicone on the palm?Yes. Ergonomically positioned silicone-printed zones provide enhanced grip on the steering wheel. Are these gloves suitable for kart racing?They are designed as fire-resistant auto-racing gloves. Karting organizations may use different certification requirements, so drivers should confirm the rules for their specific series. How should Alpinestars racing gloves fit?They should fit closely without restricting movement or causing uncomfortable pressure at the fingertips. A secure fit helps preserve steering feel and control.

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide certified fire-resistant protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Homologated to the FIA 8856-2018 standard, these racing gloves are well suited for HPDE events, autocross, time trials, club racing, and other motorsport applications requiring approved driver equipment. Silicone printing across the palm creates a secure connection with the steering wheel, while the elasticated wrist makes the gloves easy to put on and helps keep them securely positioned throughout each session. Their straightforward construction gives drivers the protection and control they need without unnecessary bulk. Certified Protection at an Accessible Price The OMP Sport Gloves are designed for drivers who need current FIA-approved protection without moving into a premium racing-glove price category. They combine essential safety features with a comfortable construction that works well for both developing drivers and experienced club-level competitors. FIA 8856-2018 homologation makes them suitable for many competitive motorsport events requiring certified fire-resistant driver apparel. Drivers should always confirm the specific equipment requirements of their sanctioning organization or racing series. Silicone-Printed Palm Grip Silicone printing across the palm improves traction between the glove and steering wheel. The low-profile design helps provide a secure grip without adding a bulky reinforcement layer that could reduce steering feedback. The additional traction allows the driver to maintain control with a more relaxed grip, which can help reduce unnecessary hand and forearm fatigue during longer sessions. Lightweight Driving Comfort The lightweight construction allows natural hand movement and maintains sensitivity through the steering wheel. This makes the OMP Sport a practical option for track days, qualifying sessions, sprint races, and extended driving events. A close-fitting design minimizes excess material around the hand while allowing the driver to operate paddle shifters, switches, buttons, and other cockpit controls with confidence. Elasticated Wrist Entry An elasticated wrist opening allows quick entry and removal while helping keep the glove securely positioned during competition. The streamlined closure eliminates the need for a bulky adjustment strap and provides a clean overlap with compatible racing-suit sleeves. Versatile OMP Styling The OMP Sport Gloves are offered in multiple color combinations, allowing drivers to coordinate them with OMP racing suits, shoes, helmets, and other equipment. Their modern graphics provide a recognizable competition look while maintaining a practical, performance-focused design. OMP Sport Racing Glove Features Fire-resistant auto racing glove construction FIA 8856-2018 homologated Silicone-printed palm for secure steering-wheel grip Low-profile grip design preserves steering sensitivity Lightweight construction for extended driving comfort Elasticated wrist for easy entry and secure retention Close-fitting design supports dexterity and cockpit control Available in multiple OMP color combinations OMP Sport Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-Printed Grip Wrist Closure: Elasticated Entry Homologation: FIA 8856-2018 Recommended Use: HPDE, Autocross, Time Trial, Club Racing, and Competitive Motorsport Why Choose the OMP Sport Gloves? The OMP Sport Gloves focus on the features drivers use every lap: certified fire protection, secure steering grip, comfortable hand movement, and a simple elasticated wrist. Their approachable price makes them a strong choice for new competitors purchasing their first FIA-approved gloves or experienced drivers looking for dependable track equipment. OMP Sport Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver clothing. Can these gloves be used for wheel-to-wheel racing?Yes, provided FIA 8856-2018-approved gloves meet the requirements of the racing series, sanctioning organization, or event. Are the OMP Sport Gloves suitable for beginners?Yes. Their combination of certified protection, comfortable construction, dependable grip, and accessible pricing makes them a practical choice for developing drivers. Do the palms have silicone grip?Yes. Silicone printing across the palm improves traction and steering-wheel control without adding excessive bulk. How do the OMP Sport Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Most drivers begin with their usual OMP glove size. Do the gloves have an adjustable wrist strap?No. The elasticated wrist provides a secure fit without requiring a separate hook-and-loop adjustment strap. Are they comfortable for long track sessions?Yes. Their lightweight construction and streamlined fit are designed to support comfort and dexterity during extended driving sessions. How should the OMP Sport Gloves be cleaned?Gently hand wash them using mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

OMP First-S Race Gloves The OMP First-S Race Gloves combine dependable fire-resistant protection, secure steering-wheel grip, and everyday comfort in an affordable competition glove. Updated to meet the FIA 8856-2018 homologation standard, the First-S is designed for drivers who want modern safety and straightforward performance without stepping into a premium price category. Silicone printing across the palms and fingers improves traction and control, while redesigned finger inserts provide a closer, more comfortable fit. A straight-cut cuff with an elasticated wrist allows quick entry and keeps the glove securely positioned throughout each session. Affordable FIA-Approved Performance The OMP First-S is built for drivers who need certified protection and reliable control at a practical price. Its lightweight construction focuses on the features that matter most behind the wheel: grip, comfort, flexibility, and current FIA approval. This makes the First-S a strong choice for drivers replacing older equipment or purchasing their first pair of FIA-homologated racing gloves. Silicone Palm and Finger Grip Silicone printing is applied across the palm and fingers to create a secure connection with the steering wheel. The low-profile grip pattern improves traction without adding the bulk of a separate reinforcement layer. Extending the silicone onto the fingers also improves control of paddle shifters, switches, buttons, and other cockpit controls. Improved Finger Inserts Redesigned finger inserts help the glove follow the natural shape of the hand more closely. The improved construction reduces excess material and supports better comfort around the fingers during repeated steering inputs. A more precise fit can also improve dexterity and reduce hand fatigue during longer sessions. Comfort for Extended Track Use The OMP First-S is designed to remain comfortable through repeated laps and long track days. Its lightweight materials allow natural hand movement while minimizing unnecessary pressure and bulk. The close-fitting construction helps the driver maintain a relaxed grip rather than squeezing the wheel excessively to stay in control. Straight-Cut Elasticated Wrist A straight-cut cuff gives the First-S a clean, traditional appearance and allows easy overlap with a compatible racing suit sleeve. The elasticated wrist keeps the glove securely positioned without requiring a bulky hook-and-loop strap. The flexible opening also makes the gloves quick and easy to put on or remove between sessions. Modern OMP Styling The OMP First-S features updated graphics and is available in multiple color options. Drivers can coordinate the gloves with OMP suits, shoes, helmets, and other racing equipment for a consistent competition look. FIA 8856-2018 Homologated Protection The OMP First-S Race Gloves are homologated to FIA 8856-2018, the current standard for fire-resistant driver clothing used in many forms of automobile competition. Drivers should always confirm the exact equipment requirements of their sanctioning organization before entering an event. OMP First-S Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone printing across the palm and fingers Low-profile grip preserves steering sensitivity Improved finger inserts enhance fit and comfort Straight-cut cuff provides a clean, streamlined fit Elasticated wrist allows easy entry and secure retention Available in multiple modern colorways FIA 8856-2018 homologated OMP First-S Nomex Glove Specifications Manufacturer: OMP Model: First-S Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Fingers: Silicone grip print with improved inserts Wrist: Elasticated closure Cuff: Straight cut Available Sizes: XS through XXL Homologation: FIA 8856-2018 Why Choose the OMP First-S? The First-S offers a practical balance of certified protection, secure grip, and comfort. Its silicone palm and finger print improve control, while the updated finger construction and elasticated wrist keep the fit simple and dependable. For drivers seeking a current FIA-approved glove with strong value and recognizable OMP styling, the First-S is an excellent competition-ready option. OMP First-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP First-S Race Gloves FIA approved?Yes. The OMP First-S is homologated to the FIA 8856-2018 standard. Can the OMP First-S Gloves be used for competitive racing?Yes, when FIA 8856-2018-approved gloves meet the requirements of the racing organization or event. Do the gloves have silicone grip on the fingers?Yes. Silicone printing covers both the palm and fingers to improve steering-wheel and cockpit control. What is the benefit of the improved finger inserts?They provide a closer, more comfortable fit while reducing excess material and helping maintain dexterity. Do the OMP First-S Gloves have a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate adjustment strap. What sizes are available?The OMP First-S Race Gloves are available in sizes XS through XXL. Are these gloves suitable for long races or track sessions?Yes. Their lightweight construction and improved finger fit are designed to reduce fatigue during extended use. How should I clean the OMP First-S Gloves?Hand wash them gently with mild soap and cool water, then allow them to air dry. Avoid machine washing, bleach, strong chemicals, and high heat. How should the OMP First-S Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips.

OMP ONE-S Racing Gloves The OMP ONE-S Racing Gloves combine lightweight construction, direct steering feedback, and long-session comfort in a proven competition design. Updated graphics give the ONE-S a modern appearance, while external seams, pre-curved fingers, and ergonomically positioned silicone grip zones help the glove feel natural around the steering wheel. A diagonal-cut gauntlet keeps excess material away from the wrist, and the strapless elastic closure allows quick entry without adding bulk. FIA 8856-2018 homologation provides current fire-resistant protection for competitive motorsport. Pre-Curved for a Natural Driving Position The ONE-S is shaped around the position of the hand while gripping a steering wheel. Its pre-curved construction reduces resistance when closing the fingers and helps prevent excess fabric from gathering across the palm. This natural shape allows the driver to maintain a more relaxed grip, which can reduce hand fatigue during longer races and repeated track sessions. External Seams for Improved Comfort External stitching moves the primary finger seams away from the inside of the glove. This creates a smoother interior and reduces pressure points against the fingers while holding the wheel. The external-seam construction also improves fingertip comfort without compromising the close fit needed for accurate use of shifters, switches, buttons, and cockpit controls. Ergonomic Silicone Palm Grip Thin fire-retardant silicone-rubber inserts are printed directly onto the palm to improve steering-wheel traction while preserving sensitivity. The updated grip layout follows the contact areas of the hand rather than covering the entire palm with unnecessary material. Strategic placement helps reduce bunching and allows the glove to flex naturally as the driver changes grip or steering position. Direct Feedback Without a Bulky Palm The low-profile silicone print adds traction without creating a thick barrier between the hand and the steering wheel. This helps the driver feel steering effort, vibration, and changes in front-end grip more clearly. The result is a secure connection that does not require excessive squeezing pressure to maintain control. Diagonal-Cut Gauntlet The ONE-S uses a distinctive diagonal-cut gauntlet designed to reduce interference around the wrist. The angled cuff follows the natural overlap between the glove and racing suit sleeve, helping maintain freedom of movement. Its extended length provides the additional wrist coverage required by modern FIA standards while keeping the glove streamlined. Strapless Elastic Wrist An elastic wrist band keeps the glove securely positioned without using a hook-and-loop strap. The simple closure makes the ONE-S easy to put on and remove while eliminating a bulky adjustment point beneath the suit sleeve. The close wrist fit also helps prevent the glove from shifting during rapid steering corrections and high-load cornering. Latex-Treated Interior The interior receives a latex treatment designed to improve resistance and help the glove remain stable against the hand. This treatment supports a more consistent fit and reduces unwanted internal movement during aggressive driving. OMP ONE-S Racing Glove Construction Lightweight fire-resistant racing glove design Pre-curved construction follows the natural driving position External seams reduce pressure points inside the fingers Thin silicone-rubber grip inserts printed directly onto the palm Ergonomic grip placement helps reduce material bunching Diagonal-cut gauntlet improves wrist movement Elastic wrist provides secure strapless retention Latex-treated interior improves grip and resistance Extended cuff provides increased wrist coverage OMP ONE-S Racing Glove Protection Fire-resistant Nomex construction Extended cuff developed for modern homologation requirements Designed to protect the hands and wrists against heat and flame exposure FIA 8856-2018 homologated OMP ONE-S Racing Glove Specifications Manufacturer: OMP Model: ONE-S Product Type: Nomex Auto Racing Gloves Finger Construction: External seams Fit: Pre-curved Palm: Fire-retardant silicone-rubber grip inserts Interior: Latex-treated Wrist: Elasticated, strapless design Gauntlet: Diagonal-cut extended cuff Homologation: FIA 8856-2018 Why the Diagonal Cuff Matters Most racing gloves use a straight cuff that can create additional material around the wrist. The ONE-S diagonal gauntlet removes material where it is not needed and provides coverage where the racing suit sleeve and glove overlap. This small design detail improves wrist flexibility and helps the glove remain comfortable when the hands are positioned at different points around the wheel. OMP ONE-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP ONE-S Racing Gloves FIA approved?Yes. The OMP ONE-S is homologated to the FIA 8856-2018 standard. What is the benefit of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points and improving comfort. Do the ONE-S Gloves have silicone palm grip?Yes. Thin fire-retardant silicone-rubber inserts are printed directly onto the palm for improved traction and steering sensitivity. Why are the grip inserts strategically positioned?The grip is placed in the primary steering-wheel contact zones to improve control while reducing unnecessary material and bunching. What is the purpose of the diagonal-cut gauntlet?The angled cuff improves wrist mobility and creates a cleaner overlap with the sleeve of a compatible racing suit. Do the gloves have a wrist strap?No. The ONE-S uses an elastic wrist band for secure retention and quick entry. What does the latex-treated interior do?It improves resistance and helps reduce movement between the glove and the driver’s hand. How should the OMP ONE-S Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excess material at the fingertips.

Sparco Windbreaker Lightweight Protection, Legendary Sparco Racing Style The Sparco Windbreaker Jacket is a thin, lightweight layer perfect for handling sudden downpours at the track. This versatile jacket features a comfortable net liner for increased breathability and a concealed hood for quick protection from the elements. Sparco Racing Windstopper Windbreaker Details The Sparco Windbreaker Jacket is a thin, lightweight jacket that is perfect for those sudden downpours at the track. Features a net liner for increased comfort and a concealed hood. EUROPEAN FIT This item is made in Italy with a European cut. It runs smaller when compared to standard US sizing. We recommend selecting one size up when ordering. Sparco Windbreaker FAQs Does this windbreaker have a relaxed fit? No, it features a European cut. We strongly recommend ordering one size up for the best fit if you're used to U.S. sizing. Is the windbreaker waterproof? It is wind- and light rain-resistant, but not fully waterproof like a rain jacket. Does it have interior lining? Yes, it's lined with a net lining for breathability Can I wear this casually or is it strictly for track use? Absolutely—it’s just as stylish for everyday wear as it is functional at the track or paddock.

Sparco Racing Hooded Full-Zip Lightweight Trackside Style, Sparco Racing Heritage The perfect balance of vintage racing style and modern-day comfort, the Sparco Racing Hooded Full Zip Jacket keeps things lightweight and authentic. Whether you're in the paddock or just want to rep your favorite livery in the wild, this hoodie-style zip jacket is your go-to layer for everyday motorsport life. Sparco Racing WWW Hooded Full Zip Jacket Features Soft and Lightweight: Made from a premium 100% pre-shrunk cotton, this full zip jacket is ideal for layering without the bulk. Iconic Racing Design: Featuring timeless motorsport style. Made in Italy: Tailored in Italy for a sleek European fit—runs smaller than standard U.S. sizing. We recommend ordering one size up. Color Options: Available in Black or Grey to suit your team look or everyday vibe. Sparco Racing Hooded Full Zip FAQs Does the Sparco Hooded Full Zip Jacket fit true to size? It has a European fit that runs smaller than typical U.S. sizing. Order one size up for best comfort and fit. Is the jacket heavy or more lightweight? It’s lightweight and perfect for layering or wearing during spring/fall temperatures—not overly bulky. Can I wear this jacket at the track? Absolutely—it's ideal for paddock wear, race weekends, or everyday use if you live the racing lifestyle.

Sparco Racing Hooded Full-Zip Lightweight Trackside Style, Sparco Racing Heritage The perfect balance of vintage racing style and modern-day comfort, the Sparco Racing Hooded Full Zip Jacket keeps things lightweight and authentic. Whether you're in the paddock or just want to rep your favorite livery in the wild, this hoodie-style zip jacket is your go-to layer for everyday motorsport life. Sparco Racing Hooded Full Zip Jacket Features Soft and Lightweight: Made from a premium 100% pre-shrunk cotton, this full zip jacket is ideal for layering without the bulk. Iconic Racing Design: Featuring timeless motorsport style. Made in Italy: Tailored in Italy for a sleek European fit—runs smaller than standard U.S. sizing. We recommend ordering one size up. Color Options: Available in Black to suit your team look or everyday vibe. Sparco Racing Hooded Full Zip FAQs Does the Sparco Hooded Full Zip Jacket fit true to size? It has a European fit that runs smaller than typical U.S. sizing. Order one size up for best comfort and fit. Is the jacket heavy or more lightweight? It’s lightweight and perfect for layering or wearing during spring/fall temperatures—not overly bulky. Can I wear this jacket at the track? Absolutely—it's ideal for paddock wear, race weekends, or everyday use if you live the racing lifestyle.

Alpinestars Tech-1 KX v3 Karting Gloves The Alpinestars Tech-1 KX v3 Karting Gloves are premium performance gloves engineered for racers who prioritize lightweight steering feel, precise grip, and long-session comfort. Their dual-layer stretch construction follows the movement of the hand while minimizing unnecessary bulk between the driver and steering wheel. A synthetic suede palm combines with strategically positioned silicone printing to deliver dependable traction and detailed steering feedback. External finger seams, pre-curved construction, ventilated sidewalls, and a 180-degree elasticated wrist create a close competition fit designed for demanding kart races, qualifying sessions, and extended practice days. Premium Lightweight Karting Performance The Tech-1 KX v3 uses technical construction methods intended to reduce weight without sacrificing durability or support. Its streamlined chassis allows the driver to feel steering loads and front-tire behavior without the disconnected sensation created by heavily padded gloves. This lightweight approach is particularly useful for racers who prefer a direct connection with the wheel and make frequent, precise steering corrections throughout a session. Dual-Layer Stretch Nylon-Cotton Construction The main glove assembly combines stretch nylon and cotton in a flexible two-layer structure. The material conforms closely to the hand while allowing the knuckles and fingers to move naturally through repeated steering inputs. A close fit also helps prevent loose fabric from shifting, folding, or bunching between the palm and steering wheel. Synthetic Suede Palm The synthetic suede palm provides a durable and consistent contact surface for the steering wheel. It balances abrasion resistance with the sensitivity required to recognize changes in steering weight, tire grip, and chassis response. A camo-style palm treatment gives the glove a distinctive appearance while maintaining the low-profile construction expected from a high-level karting glove. Strategically Positioned Silicone Grip Silicone printing is applied across the palm and fingers to improve steering-wheel traction. The ergonomic pattern is positioned to support the areas of the hand that experience the greatest contact and load while driving. The flexible print helps reduce unwanted hand movement without creating a thick or rigid layer that would interfere with steering feel. External Seams for Reduced Pressure External finger seams move the stitching away from sensitive areas inside the glove. This creates a smoother interior and helps prevent rubbing, pressure points, and irritation during long races. Drivers who find conventional internally stitched gloves uncomfortable may especially appreciate the reduced seam bulk around the fingertips and finger joints. Pre-Curved Finger Construction The fingers are shaped around the natural position of the hand while gripping a kart steering wheel. This pre-curved profile minimizes material bunching and reduces the effort required to keep the hand closed. By allowing the hand to rest in a more natural driving position, the glove can help reduce fatigue during endurance races, repeated heats, and long testing sessions. Breathable Finger Sidewalls Mesh material along the finger sidewalls promotes airflow through areas where heat and perspiration commonly accumulate. Improved ventilation helps maintain comfort and keeps the glove from becoming excessively damp during warm-weather competition. The breathable panels are integrated without compromising the close fit or flexibility of the fingers. Touchscreen-Compatible Thumb and Index Finger Touch-compatible printing on the thumb and index finger allows the driver to operate many smartphones, tablets, timing devices, and data displays without removing the gloves. This is useful between sessions when reviewing lap times, checking schedules, recording setup changes, or communicating with the team. 180-Degree Elasticated Wrist The cuff incorporates an elasticated wrist section extending through 180 degrees for easier entry and secure retention. The opening stretches while the glove is being put on and then contracts around the wrist once positioned. This construction eliminates the bulk of a large external strap while helping prevent the glove from shifting during aggressive steering movements. Alpinestars Tech-1 KX v3 Karting Glove Features Premium lightweight karting-glove construction Dual-layer stretch nylon-cotton main assembly Synthetic suede palm provides durability and steering feel Ergonomic silicone grip printing across the palm and fingers External seams reduce internal pressure points Pre-curved fingers minimize material bunching Breathable mesh finger sidewalls improve ventilation Flexible construction supports precise hand movement Touchscreen-compatible thumb and index finger 180-degree elasticated wrist allows easy entry Close performance fit supports steering sensitivity Alpinestars Tech-1 KX v3 Karting Glove Specifications Manufacturer: Alpinestars Model: Tech-1 KX v3 Product Type: Kart Racing Gloves Main Construction: Dual-Layer Stretch Nylon and Cotton Palm: Synthetic Suede Grip: Ergonomic Silicone Print Finger Shape: Pre-Curved Finger Seams: External Ventilation: Mesh Finger Sidewalls Touchscreen Compatibility: Thumb and Index Finger Wrist: 180-Degree Elasticated Construction Intended Use: Kart Racing Tech-1 KX v3 Versus Tech-1 K v3 The Tech-1 KX v3 is positioned as the more premium and technically focused option. It emphasizes weight reduction, external-seam comfort, ventilated finger sidewalls, a synthetic suede palm, and a more advanced silicone grip layout. The Tech-1 K v3 provides strong competition performance at a lower tier, while the KX model is better suited to drivers seeking a more refined fit, lighter feel, and greater attention to steering sensitivity. Who Should Choose the Tech-1 KX v3? The Tech-1 KX v3 is a strong choice for experienced club racers, national-level competitors, endurance drivers, and anyone who finds internal finger seams uncomfortable. Its lightweight construction also suits drivers who prefer direct steering feedback rather than thick palm cushioning. Because this is an earlier-generation model, racers competing under mandatory equipment rules should inspect the glove’s physical homologation label and confirm that it meets the current requirements of their championship. Alpinestars Tech-1 KX v3 Kart Racing Glove Size Chart Frequently Asked Questions Is the Tech-1 KX v3 still the current Alpinestars KX glove?No. It is an earlier-generation model that has been succeeded by the Tech-1 KX v4. The v3 can still be an excellent choice when available in the correct size and color. Does the Tech-1 KX v3 have FIA 8877-2022 approval?Do not assume that it does based only on the model name. Check the homologation label sewn into the specific gloves and verify the accepted standard with your race series before purchasing them for regulated competition. What makes the KX v3 more premium than the Tech-1 K v3?The KX v3 uses more technical lightweight construction, ventilated finger sidewalls, a synthetic suede palm, external seams, and a refined silicone grip pattern intended to improve comfort and steering sensitivity. Is the palm heavily padded?No. The glove emphasizes direct steering feedback and low weight rather than substantial vibration-damping padding. Racers wanting more cushioning may prefer a thicker kart glove. Does the silicone cover the entire palm?The silicone is strategically printed across the palm and fingers rather than forming one solid rubber layer. This provides grip while allowing the glove to remain flexible. Will the synthetic suede palm stretch with use?The glove may settle slightly as it conforms to the hand, but it should not be purchased excessively tight. The fingers and palm should move freely from the first use. Why are the finger seams on the outside?External seams keep bulky stitching away from the inside of the fingers, reducing pressure and irritation during long sessions. Are these cooler than the standard Tech-1 K v3?The mesh finger sidewalls are specifically intended to improve airflow and reduce perspiration buildup. Actual comfort will still depend on temperature, session duration, and individual heat sensitivity. Do both touchscreen fingertips work with every device?The thumb and index finger include touch-compatible printing, but performance can vary with the device, screen protector, moisture, and fingertip contact angle. How should these gloves fit at the fingertips?The fingertips should be fully filled without painful pressure. Empty space at the ends can reduce steering sensitivity, while a glove that is too short may restrict movement and stress the seams. Are the Tech-1 KX v3 Gloves suitable for endurance karting?Yes. Their external seams, pre-curved fingers, breathable sidewalls, and lightweight construction are well suited to extended driving sessions. Can these gloves be used for sim racing?Yes. The silicone grip and lightweight construction can provide excellent control for sim racing, although the gloves were developed primarily for kart competition. How should the synthetic suede palm be cleaned?Gently hand wash the gloves in cool water with mild soap. Avoid aggressive scrubbing, bleach, machine washing, and direct heat, which can damage the palm and silicone printing. How should the gloves be stored between events?Allow them to air dry completely before placing them in a gear bag. Store them flat or loosely shaped in a cool, dry area away from heat and direct sunlight.

OMP First Evo Racing Gloves   The OMP First Evo Racing Gloves deliver premium comfort, responsive steering feel, and FIA-certified protection at an accessible price. Their lightweight construction combines external seams, a pre-curved hand shape, and low-profile silicone-rubber palm inserts to provide many of the features normally associated with higher-priced competition gloves. An elasticated wrist keeps the glove securely positioned without adding a bulky closure, while the straight-cut extended gauntlet provides clean overlap with a compatible racing suit sleeve. FIA 8856-2018 homologation makes the OMP First Evo a dependable option for modern motorsport competition. Premium Comfort Without the Premium Price The OMP First Evo is designed for drivers who want advanced glove construction without moving into the highest price category. Its streamlined design focuses on the features that make the greatest difference behind the wheel: reduced pressure points, secure grip, natural hand movement, and lightweight fire-resistant protection. This combination makes the First Evo a strong choice for drivers who value both performance and overall value. External Seams Reduce Pressure Points The primary finger seams are positioned on the outside of the glove rather than against the driver’s skin. This creates a smoother interior and reduces pressure along the fingers while gripping the steering wheel. External stitching is often found on premium racing gloves because it can significantly improve comfort during endurance races, testing sessions, and long track days. Pre-Curved Driving Fit The OMP First Evo is shaped around the natural position of the hand while holding a steering wheel. Its pre-curved fingers require less effort to close and help prevent excess material from gathering across the palm. This driving-specific shape promotes a more relaxed grip, reducing hand fatigue while maintaining precise operation of paddle shifters, switches, buttons, and gear levers. Printed Silicone-Rubber Palm Grip Fire-retardant silicone-rubber inserts are printed directly onto the palm to provide dependable steering-wheel traction with minimal added thickness. The low-profile grip improves control while preserving sensitivity through the wheel. Drivers can maintain a secure hold while still feeling steering resistance, vibration, and changes in front-end grip. Maximum Grip with Minimum Bulk The printed grip surface eliminates the need for a thick, separate palm reinforcement layer. This helps the glove flex naturally and keeps unnecessary material away from the primary steering-wheel contact areas. The combination of silicone grip and a pre-curved palm allows the driver to maintain control without squeezing the wheel excessively. Straight-Cut Extended Gauntlet The straight-cut gauntlet gives the OMP First Evo a clean, traditional appearance while providing additional wrist coverage. Its extended length helps maintain proper overlap with the sleeve of a compatible fire-resistant racing suit. The longer cuff is designed in accordance with current FIA homologation requirements for increased protection against heat and flame exposure. Elasticated Wrist for Secure Retention An elastic band around the wrist keeps the glove securely fitted without requiring a hook-and-loop strap. The flexible opening makes the First Evo easy to put on and remove while helping prevent unwanted movement during aggressive steering inputs. The strapless design also eliminates a bulky adjustment point beneath the racing suit sleeve. FIA 8856-2018 Homologated Protection The OMP First Evo Racing Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. Their fire-resistant construction and extended cuff provide current protection for the hands and wrists in demanding motorsport environments. Drivers should verify the exact glove certification required by their sanctioning organization before competition. OMP First Evo Nomex Glove Construction Lightweight fire-resistant racing glove construction External seams reduce interior pressure points Pre-curved fingers follow the natural driving position Printed fire-retardant silicone-rubber palm inserts Low-profile grip preserves steering sensitivity Straight-cut extended gauntlet Elastic wrist provides secure retention Easy on-and-off strapless design OMP First Evo Nomex Glove Protection Fire-resistant construction developed for auto racing Extended cuff increases wrist and sleeve coverage Designed for protection against heat and flame exposure FIA 8856-2018 homologated OMP First Evo Racing Glove Specifications Manufacturer: OMP Model: First Evo Product Type: Fire-Resistant Auto Racing Gloves Fit: Pre-curved Seams: External Palm: Printed fire-retardant silicone-rubber inserts Wrist: Elasticated Gauntlet: Straight-cut extended cuff Homologation: FIA 8856-2018 Why Drivers Choose the OMP First Evo The OMP First Evo combines several construction features normally associated with more expensive racing gloves. External seams help keep stitching away from the fingers, the pre-curved shape reduces hand fatigue, and the printed silicone palm provides secure traction without dulling steering feedback. For drivers seeking an FIA-approved glove with a refined fit, dependable grip, and strong overall value, the OMP First Evo is an excellent competition-ready choice. OMP First Evo Nomex Glove Size Chart Frequently Asked Questions Are the OMP First Evo Racing Gloves FIA approved?Yes. The OMP First Evo is homologated to the FIA 8856-2018 standard. What is the benefit of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points and improving comfort while holding the steering wheel. Do the OMP First Evo Gloves have silicone palm grip?Yes. Fire-retardant silicone-rubber inserts are printed directly onto the palm to improve traction and steering sensitivity. How does the pre-curved shape improve comfort?The pre-curved design follows the natural position of the hand around the steering wheel, reducing resistance, material bunching, and fatigue. Do these gloves use a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate closure strap. Why does the OMP First Evo have an extended cuff?The extended gauntlet provides additional wrist protection and proper overlap with a compatible racing suit sleeve. How should OMP First Evo Racing Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Are the OMP First Evo Gloves comfortable for long races?Yes. Their external seams, pre-curved construction, lightweight design, and low-profile palm grip are intended to improve comfort during extended driving sessions.

Sparco Targa Florio Full-Zip Sweatshirt Sparco Targa Florio Collection - Heritage and Everyday Wear The Sparco Targa Florio Full Zip sweatshirt is a testament to the enduring appeal of classic motorsport style. Part of the celebrated Targa Florio collection, this sweatshirt offers a comfortable and stylish option for everyday wear, reflecting a heritage of speed and passion. Detailed appearance of the sweatshirt The sweatshirt is presented in a clean, white color and a Navy version as well. It features a full-length zipper down the front. There are two side welt pockets providing a sleek look. The cuffs and the bottom hem are finished with fine ribbing, ensuring a snug fit. The design is simple and classic, emphasizing clean lines and functionality. Comfortable and Durable Construction While the specific material composition is not detailed in the photo descriptions, the construction appears sturdy and designed for comfort, suitable for layering or wearing on its own. Functional Design Elements The full zip allows for easy on and off and adjustable ventilation. The side pockets offer practical storage or a place to warm hands. The ribbed cuffs and hem provide a secure and comfortable fit, helping to retain warmth. Versatile Style This sweatshirt's classic design makes it a versatile addition to any casual wardrobe. It can be easily paired with jeans, track pants, or shorts for a relaxed, sporty look, subtly referencing the motorsport world. Why Choose This Sweatshirt? Classic Style: Timeless design inspired by the Targa Florio heritage. Everyday Comfort: Designed for ease of wear and versatility. Practical Features: Full zip and side pockets for functionality. Clean Aesthetic: Simple and elegant look in a white finish. The Sparco Targa Florio Full Zip sweatshirt is an excellent choice for those who appreciate understated style with a hint of motorsport history. Sparco Targa Florio Full Zip FAQs Is it fleece-lined or insulated? No, it’s lightweight and unlined—perfect for mild weather or trackside layering, not deep winter use. How should I choose a size? It runs small due to its European fit. We suggest ordering one size up from your usual U.S. jacket size. Can I machine wash it? Yes, but we recommend cold wash and air drying to preserve the shape and embroidery details.

Alpinestars Tech-1 ZX v2 Nomex Racing Gloves The Alpinestars Tech-1 ZX v2 Nomex Racing Gloves are premium fire-resistant driving gloves engineered for exceptional comfort, steering-wheel feel, and protection. Designed for serious competitors, the Tech-1 ZX v2 combines strategically positioned seams, a lightweight aramidic construction, and advanced palm grip technology. Internal stitching around the thumb improves sensitivity when operating steering-wheel buttons and cockpit controls, while externally stitched finger seams reduce pressure points and provide a smooth, comfortable fit during long races. Premium Nomex Racing Glove Construction The Tech-1 ZX v2 features a flame-resistant aramidic fiber main construction with a bonded aramidic lining. This lightweight assembly helps regulate temperature while maintaining the flexibility and sensitivity required for precise driving. Alpinestars uses lightweight printed graphics instead of heavier sewn-on details, helping reduce overall glove weight without sacrificing its professional appearance. Alpinestars Tech-1 ZX v2 Glove Features FIA 8856-2018 homologated for motorsport competition Flame-resistant aramidic fiber main construction Bonded aramidic lining for temperature control and comfort Internal thumb seam for improved control sensitivity External finger seams to reduce pressure points Ergonomic chassis with pre-curved fingers Strategically positioned silicone grip on the palm and fingers Latex-treated inner palm to help reduce micro-slipping Outer grip zones for precise cockpit control Touchscreen-compatible thumb and index fingertips Open-cuff design with a 180-degree elasticated wrist Extended cuff length for increased fire and heat protection Lightweight printed graphics Advanced Palm Grip and Control The inner palm is treated with latex to reduce small movements between the hand and glove while gripping the steering wheel. This helps provide a more secure and consistent connection during high-intensity driving. Ergonomically positioned silicone grip sections across the palm and fingers improve traction without making the glove feel overly stiff. Additional outer grip zones provide improved control when operating switches, paddles, and other cockpit equipment. Internal and External Seam Construction The Tech-1 ZX v2 uses internal stitching around the thumb to improve tactile feedback when operating multiple push-buttons commonly found on modern racing steering wheels. The four fingers use external seams that move bulky stitching away from the inside of the glove. This reduces pressure points and improves comfort, especially during endurance racing and extended track sessions. Pre-Curved Ergonomic Fit The ergonomic chassis and pre-curved fingers follow the natural position of the hands while holding a steering wheel. This helps reduce material bunching and driver fatigue while maintaining a secure and responsive fit. An open-cuff design with a 180-degree elasticated wrist makes the gloves easier to put on and remove while keeping them securely positioned during competition. FIA 8856-2018 Protection The Alpinestars Tech-1 ZX v2 Gloves are certified to the FIA 8856-2018 homologation standard. The extended cuff provides increased wrist and forearm coverage to help protect against fire and heat when worn with an approved racing suit. Touchscreen Compatibility Touch-sensitive material on the thumb and index fingertips allows drivers to operate compatible touchscreen devices, including mobile timing applications and data acquisition equipment, without removing their gloves. Sizing Chart Alpinestars Tech-1 ZX v2 Nomex Racing Gloves FAQs Are the Alpinestars Tech-1 ZX v2 Gloves FIA approved?Yes. The gloves are certified to the FIA 8856-2018 homologation standard for fire-resistant motorsport apparel. Why are the finger seams located on the outside?External finger seams reduce internal pressure points and provide a smoother, more comfortable fit while driving. Why is the thumb seam stitched internally?The internal thumb seam improves sensitivity when operating steering-wheel buttons, switches, and other cockpit controls. What improves the steering-wheel grip?The palm combines a latex treatment with strategically positioned silicone grip sections to reduce slipping and improve control. Are the Tech-1 ZX v2 Gloves touchscreen compatible?Yes. The thumb and index fingertips are designed to operate compatible touchscreen devices. Do these gloves have pre-curved fingers?Yes. The fingers are pre-curved to follow the natural driving position and help reduce material bunching and fatigue. How does the open-cuff design work?The open cuff and 180-degree elasticated wrist make the gloves easier to put on and remove while providing a secure fit around the wrist.