Roll Bar Accessories

CMS Performance Sub Strap Mount for Porsche Lightweight Carbon Bucket Seats This Product Fits the Following Cars: 992 GT3/GT3RS 991.1 & 991.2 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 718 Cayman GT4RS The Best Way to Install Sub Straps in your Porsche The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Light Weight Bucket seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The CMS Performance Sub Strap Mount fits the driver- and/or passenger-side seats. Born In The USA CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety. Custom Porsche Colors Available For Personalized Look The standard powder coat color of the CMS Performance Sub Strap Mount is a silky-smooth satin black. If you want your sub strap mounts to show a bit of flair, we have color-matched several Porsche paint colors and can powder coat your sub strap mounts in any of those colors for an additional $95 per mount. CMS Performance Sub Strap Mount Details Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated satin black standard; several Porsche colors available (custom colors are an additional $95 per mount) Fits driver or passenger seat (Porsche Carbon LWB only) Simple to install Compatible with OEM seat belt and airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550 This Mount Fits All Variants of the Following Cars: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-003 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for BMW This Mount Fits All Sub-Models Of Current BMW Cars The Best Way to Mount Harness Lap and Sub Belts in Your BMW  The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount for BMW Details: Manufacturer: CMS Performance Manufacturer part no.: CMSP-SS-BLACK-BMW Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86 This Mount Fits All Variants of the Following Cars: Toyota GR Supra A90/A91 (2019+) Toyota GR86 (2021+) The Best Way to Mount Harness Lap and Sub Belts in Your GR Supra or GR86 The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-005 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap Mount for Corvette C8 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C8  Chevrolet Corvette C8 Z51 Chevrolet Corvette C8 Z06 Chevrolet Corvette C8 ZR-1 The Best Way to Mount Harness Lap and Sub Belts in Your C8 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Manufacturer Part Number: Harninstall-C8 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C8 (2020+) Chevrolet Corvette Z06, C8 (2023+) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C8 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For Gen 6 Camaro This Product Fits The Following Cars: Chevrolet Camaro Coupe, all (2016+) Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro. Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-G6C Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

Allstar Performance SFI 45.1 Roll Bar Padding Allstar Performance SFI 45.1 mini roll bar padding is ideal for tight areas in a race car when standard padding is too large. It features a unique, compact design to provide driver protection to specific areas and meets SFI 45.1 specifications. Allstar Performance Roll Bar Padding is easy to install, with a special peel-and-stick backing giving you a secure fit on roll bars ranging from  1 1/4 inches to 1 3/4 inches in diameter. Allstar Performance Roll Bar Padding Details: Manufacturer: Allstar Performance Thickness: 0.75 inches Length: sold in individual 36-inch lengths Maximum Bar Diameter: 1.75 inches Minimum Bar Diameter: 1.25 inches Certification: SFI 45.1 Attachment: attaches to roll bar with adhesive backing

CMS Performance Locking Roll Bar Harness Collars Designed For CMS Performance Roll Bars To Keep Harnesses In Place These locking roll bar collars from CMS Performance are designed and perfectly sized to fit roll bars with either 1.75" or 1.50" O.D. cross-bars. Precision-machined CMS Performance Roll Bar Harness Collars help keep your harness shoulder straps in exactly the right place on your roll bar. These easy-to-install double-split aluminum collars come with high-strength Allen bolt hardware. CMS Performance powder coats them in rich satin black so they look as good as they perform. CMS Performance Roll Bar Harness Collar Details: Manufacturer: CMS Performance Manufacturer Part Numbers: RB-COLLAR-AL175 or RB-COLLAR-AL150 Features: Clamp tight to help keep your shoulder straps firmly located in the proper position Finish: Satin black powder coating for long-lasting great looks Roll bar collars are priced individually

CMS Performance Rear Seat Delete For BMW M2 (F87) The CMS Performance Rear Seat Delete for the BMW F87 M2 is specifically designed and manufactured by CMS Performance in the USA to fit seamlessly with the CMS Performance Roll Bar for BMW F87 M2 (2016-20). While it will fit the M2 without the roll bar, it has cut-outs to allow the tubing of the CMS Performance roll bar to pass through.

CMS Performance Rear Seat Delete BMW G87 M2 The CMS Performance rear seat delete for the BMW G87 M2 is specifically designed and manufactured by CMS Performance in the USA to fit seamlessly with the CMS Performance Roll Bar for BMW G87 M2 (2023+). While it will fit the M2 without the roll bar, it has cut-outs intended for use with the CMS Performance roll bar.

Shrader Performance Rear Seat Delete For Mustang S550/Shelby GT350/GT350R/GT500 Weighing about 30 pounds less than the factory rear seats, the Shrader Rear Seat Delete kit removes as much weight as possible while retaining a strong, solid support. Tested on the GT350 and confirmed fitment. The back panel easily folds down for access to the trunk (a first in Mustang RSD designs) by popping out two plastic clips.  The fully-carpeted rigid molded plastic panels are strong enough for luggage, tires, race tools, and more.  With sound insulation padding built into each panel, no detail was spared.  Even the trunk area has a finished look! Detailed instructions are included, using factory bolt holes for mounting.  Black carpet only.  Does not fit convertibles. As seen in the 2016 SEMA show at the Ford Motor Company booth featured in the 2017 VMP Track Attack Mustang. This Rear Seat Delete Fits The Following Cars All 2015+ Mustang Fastback (hardtop) including V6, Mustang GT, Ecoboost, Shelby GT350, GT500. Does not fit convertibles. (Not necessary in Shelby GT350R, which comes with a factory rear seat delete.) Straightforward Installation Basic metric sockets, T40 and T50 Torx bits. Some cutting is involved when fitting around the CMS Performance Roll Bar. Click here for basic installation instructions

Shrader Performance Rear Seat Delete For Gen 6 Camaro The Shrader Performance rear seat delete for the 6th generation Chevy Camaro includes features like a fold-down rear panel for access through the trunk. Simply pop out four plastic pins and the rear panel folds down in seconds. Shrader Performance also built the support braces under the rear seat delete's lower panels to support over 100 lbs. of cargo! The lower panels can be lifted to provide access to a small out-of-sight storage space for things like small tools, a handbag, and anything else you don’t want visible. Or this space can be used to mount aftermarket components. The foundation of Shrader Performance rear seat delete kits is a strong ABS plastic platform, formed for superior rigidity and strength and covered in high quality black carpet to match the factory OEM carpeting. They are the only manufacturer using this exclusive design, and all rear seat delete kits are made at their facility in North Carolina. Shrader puts sound-insulating padding on all carpeted panels as standard equipment to help subdue exterior road noise. Still, your Camaro will instantly shed about 20 lbs.! Installation is easy with the link to full instructions below. No removal of the interior side panels is needed. Simply remove your seats and a few components and install the new RSD panels. Completely reversible in minutes if you decide to put your seats back in. Shrader Performance Rear Seat Delete Fits: 2016 - 2024 Chevrolet Camaro Hardtop Coupe (not convertible) Can be easily modified to fit the CMS Performance Roll Bar for Gen 6 Camaro Installation Notes Tools required include basic metric sockets and a T50 Torx bit. Some cutting is involved to fit the rear seat delete around a CMS Performance Roll Bar, or you can choose to have your rear seat delete pre-cut to fit the CMS Performance Roll Bar. Click here for basic installation instructions