F80 M3, F82/F83 M4

Brembo Front 380x34 Floating Rotors & Six-Piston GT-R System Calipers For: BMW M2 (F87) BMW M3 (F80) BMW M4 (F82) The Most Sophisticated High Performance Braking System Ever Manufactured For Your BMW This is a lightweight two-piece rotor and caliper system for racing, track days, and high-performance driving. The Brembo GT System combines increased thermal capacity and lightweight characteristics of 2-piece floating rotors for an extremely versatile and durable system on or off the track. Brembo GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. Racing-Derived Monoblock Calipers in Billet Aluminium Lightweight, rigid and resistant to high temperatures, Brembo GT-R calipers are made from billet aluminum with a radial 6-piston arrangement. Brembo GT-R calipers reduce unsprung weight, a key to improving suspension dynamics and vehicle performance. These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum. Brembo GT-R calipers are nickel plated to protect against corrosion, giving you extraordinary Brembo quality that lasts. The Brembo logo is CNC machined in red embossing. Two-Piece Floating Discs Reduce Unsprung Weight and Dissipate Heat Quickly Brembo GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc uses anti-noise hardware that is the direct result of Brembo's experience with brakes designed for Formula 1 competition. Each disc is 380mm in diameter and 34mm thick. Brembo Brake Pads Provide Optimum Performance in Various Driving Conditions The Brembo GT-R range offers a series of friction material which is able to meet a wide range of driving types. Brembo gives you optimum braking performance in various driving conditions, both on and off the track. In addition to High Performance Street brake pads, pads with racing/track-day friction material are also available. In order to guarantee correct installation, the GT-R kit includes all the necessary hardware, such as billet brackets and installation adaptors plus stainless steel Goodridge brake lines.

Brembo Rear 380mm x 28mm Floating Rotors & Six-Piston GT-R Calipers For: BMW M2 (F87) BMW M3 (F80) BMW M4 (F82) The Most Sophisticated High Performance Braking System Ever Manufactured For Your BMW This is a lightweight two-piece rotor and caliper system for racing, track days, and high-performance driving. The Brembo GT System combines increased thermal capacity and lightweight characteristics of 2-piece floating rotors for an extremely versatile and durable system on or off the track. Brembo GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. Racing-Derived Monoblock Calipers in Billet Aluminium Lightweight, rigid and resistant to high temperatures, Brembo GT-R calipers are made from billet aluminum with a radial 6-piston arrangement. Brembo GT-R calipers reduce unsprung weight, a key to improving suspension dynamics and vehicle performance. These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum. Brembo GT-R calipers are nickel plated to protect against corrosion, giving you extraordinary Brembo quality that lasts. The Brembo logo is CNC machined in red embossing. Two-Piece Floating Discs Reduce Unsprung Weight and Dissipate Heat Quickly Brembo GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc uses anti-noise hardware that is the direct result of Brembo's experience with brakes designed for Formula 1 competition. Each disc is 380mm in diameter and 28mm thick. Brembo Brake Pads Provide Optimum Performance in Various Driving Conditions The Brembo GT-R range offers a series of friction material which is able to meet a wide range of driving types. Brembo gives you optimum braking performance in various driving conditions, both on and off the track. In addition to High Performance Street brake pads, pads with racing/track-day friction material are also available. In order to guarantee correct installation, the GT-R kit includes all the necessary hardware, such as billet brackets and installation adaptors plus stainless steel Goodridge brake lines.

Girodisc A1-186 Two-Piece Floating Front Racing Brake Rotors FITMENT: BMW F80 M3 with blue calipers, Front BMW F82 M4 with blue calipers, Front BMW F87 M2 with blue calipers, Front Upgrade Your BMW F8X To The Best Racing Rotors Available If you have a BMW M2, M3, or M4 with blue calipers and iron rotors, this Girodisc floating iron rotor system is a direct replacement for your BMW ;front rotors. No modifications to your car are necessary. The 380mm diameter rotors will bolt directly to your BMW and work with the original blue calipers perfectly. By upgrading your BMW brakes with lightweight high-performance replacements, your factory bias is maintained as well as your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Girodisc A2-186 Two Piece Floating Rear Racing Brake Rotors Girodisc Rotors to Replace the Rear Rotors on the Following Cars: BMW F80 M3 with blue calipers BMW F82 M4 with blue calipers BMW F87 M2 with blue calipers Upgrade Your BMW F8x To The Best High Performance Rotors Available Whether you have a BMW M2, M3, or M4 with blue calipers and iron rotors, this Girodisc floating iron rotor system is a direct replacement for your BMW front rotors. No modifications to your car are necessary. The 380mm diameter rotors will bolt directly to your BMW and work perfectly with the original blue calipers. By upgrading your BMW brakes with lightweight high-performance replacements from Girodisc and Competition Motorsport, your factory bias is maintained as well as your ABS efficiency. The central hat section of the Girodisc rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's proprietary American-made cast iron and machined from start to finish in house at Girodisc. The disc utilizes a curved vane design, developed in racing to act as a centrifugal pump forcing cooling air through the disc. The disc and hat are joined by a floating mount system using 12 high-strength alloy steel drive pins manufactured by Girodisc in the USA and cadmium plated for long-lasting corrosion resistance. The drive pins bear the braking load while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side, allowing the rotor to grow with heat expansion while eliminating the rattle typically associated with floating rotors. A floating rotor will also self-center between the pads. Once your Girodisc system is in place, you can simply replace the cast iron discs as needed. Sold/priced per pair.

Girodisc D1-186 Replacement Rotor Rings (Discs) Girodisc replacement rotor rings are direct replacements for the iron discs on your Girodisc A1-186 two-piece rotors, with no modifications necessary. New cap screws and washers are included with these replacement rotors. We do not recommend re-using the old hardware. (This kit is contains two cast-iron discs and associated hardware. No aluminum center hat.) The replacement rotor rings and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. Rotor ring-only replacement helps to minimize costs and deliver outstanding performance. Sold/priced per pair.

Girodisc D2-186 Replacement Rotor Rings (Discs) Girodisc replacement rotor rings are direct replacements for the iron discs on your Girodisc A2-186 two-piece rear rotors, with no modifications necessary. New cap screws and washers are included with these replacement rotors. We do not recommend re-using the old hardware. (This kit is contains two cast-iron discs and associated hardware. No aluminum center hat.) The replacement rotor rings and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. Rotor ring-only replacement helps to minimize costs and deliver outstanding performance. Sold/priced per pair.

Girodisc A1-220 Two-Piece Floating Front Racing Brake Rotors FITMENT: BMW F80 M3 (incl. CS) w/ CCB (gold calipers) BMW F82 M4 (incl. CS) w/ CCB (gold calipers) BMW F87 M2/M2 Competition/M2 CS (red or silver calipers) BMW F87 M2 CS w/ CCB (gold calipers) Racing Brake Rotors To Replace Your Fragile BMW Rotors Whether you have a BMW M2 with red or silver calipers and drilled rotors or a BMW M2, M3, or M4 with gold calipers and the OEM CCB, this Girodisc floating iron rotor system is a direct replacement for your BMW front rotors. No modifications to your car are necessary. The 400mm diameter rotors will bolt directly to your BMW and work with the original red, silver, or gold calipers (depending on your model) perfectly. By upgrading your BMW CCB brakes with lightweight high performance iron replacements, your factory bias is maintained as well as your ABS efficiency. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

Girodisc A2-220 Two Piece Floating Rear Racing Brake Rotors Girodisc Rotors to Replace the Rear Rotors on the Following Cars: BMW F80 M3 including CS with optional carbon ceramic brake package (gold calipers) BMW F82 M4 including CS with optional carbon ceramic brake package (gold calipers) BMW F87 M2, M2 Competition & M2 CS with red or silver calipers BMW F87 M2 CS with optional carbon ceramic brake package (gold calipers) High Performance Brake Rotors to Replace Your Fragile BMW Rotors Whether you have a BMW M2 with red or silver calipers and drilled rotors or a BMW M2, M3, or M4 with gold calipers and the OEM CCB, this Girodisc floating iron rotor system is a direct replacement for your BMW rear rotors. No modifications to your car are necessary. The 380mm diameter rotors will bolt directly to your BMW and work with the original red, silver, or gold calipers (depending on your model) perfectly. By upgrading your BMW CCB brakes with lightweight high performance iron replacements, your factory bias is maintained as well as your ABS efficiency. The central hat section of the Girodisc rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's proprietary American-made cast iron and machined from start to finish in house at Girodisc. The disc utilizes a curved vane design, developed in racing to act as a centrifugal pump forcing cooling air through the disc. The disc and hat are joined by a floating mount system using 12 high-strength alloy steel drive pins manufactured by Girodisc in the USA and cadmium plated for long-lasting corrosion resistance. The drive pins bear the braking load while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side, allowing the rotor to grow with heat expansion while eliminating the rattle typically associated with floating rotors. A floating rotor will also self-center between the pads. Once your Girodisc system is in place, you can simply replace the cast iron discs as needed. Sold/priced per pair.

CMS Performance RF1 DOT4 Racing Brake Fluid Real-Life High Boiling Point Without The Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid. RF1 Racing Brake Fluid Details: Typical dry boiling point: 328º C (622º F) Typical wet boiling point: 204º C (399º F) Exceeds DOT3 & DOT4 standards Bottle size: 500 ml (16.9 fl oz) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Pagid Racing RSL 29 (Yellow) The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsports.  This racing compound combines the outstanding wear rate of the RS 19 with a slightly higher coefficient of friction and initial bite. Based on the more aggressive Pagid RS 14 (Black), a slight reduction of the friction value improves the modulation (control) of RSL 29. Nevertheless, RSL 29's friction value is high enough for cars without power-assisted brake system and ensures comfortable low effort on the brake pedal. Constant temperatures up to 600°C (1,100°F) are possible. This combination of friction value, fade stability and low wear on pads and rotors is unmatched. Pagid RSL 29 provides very high levels of performance and response at all temperatures; not much heat is needed to bring the pad up to its optimum performance level. It's a favorite with endurance racers, having won many classes at major endurance events at Le Mans, Daytona, Spa, Nurburgring, etc. Exceptional pad life and very low rotor wear have made it possible to run 24 hours without a change of pads or rotors! Although designed primarily for endurance racing, RSL 29's consistent levels of performance and user friendliness make it popular for sprint- and short distance races as well. RSL 29 has also found favor in the growing track day market due to the level of control, good cold performance, long life, and low rotor wear.

Pagid Racing RSL 29 (Yellow) The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsports.  This racing compound combines the outstanding wear rate of the RS 19 with a slightly higher coefficient of friction and initial bite. Based on the more aggressive Pagid RS 14 (Black), a slight reduction of the friction value improves the modulation (control) of RSL 29. Nevertheless, RSL 29's friction value is high enough for cars without power-assisted brake system and ensures comfortable low effort on the brake pedal. Constant temperatures up to 600° C (1100° F) are possible. This combination of friction value, fade stability and low wear on pads and rotors is unmatched. Pagid RSL 29 provides very high levels of performance and response at all temperatures; not much heat is needed to bring the pad up to its optimum performance level. It's a favorite with endurance racers, having won many classes at major endurance events at Le Mans, Daytona, Spa, Nurburgring, etc. Exceptional pad life and very low rotor wear have made it possible to run 24 hours without a change of pads or rotors! Although designed primarily for endurance racing, RSL 29's consistent levels of performance and user friendliness make it popular for sprint- and short distance races as well. RSL 29 has also found favor in the growing track day market due to the level of control, good cold performance, long life, and low rotor wear.  

Performance Friction PFC Brake Pads 1609.XX.17.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  PFC 11 Compound A new generation sprint and medium-distance friction compound, PFC 11 gives you the ultimate in control and modulation, along with superior disc conditioning. Developed from PFC's ultra-popular 01 compound with improved bite, modulation, and release characteristics. PFC 11 is ultra-smooth, developed to reduce wheel locking at the end of braking while giving more hot and cold bite than the endurance-oriented 08 compound. Brake with ultimate control, modulation, and confidence. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance sports car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds, easily matching the wear characteristics of competitors' materials but with much higher bite and consistent performance across a broad temperature range. FITMENTS: BMW F2x 2-Series with Sport calipers BMW F3x 3- and 4-Series with Sport calipers BMW F8x M2/M3/M4 (without carbon ceramic brakes) BMW M135i / M140i F20/F21 2011-BMW M2 excluding C/CS 2016-BMW 228i Blue Caliper 2014-BMW 228i xDrive Blue Caliper 2015-BMW 320d / 320i Blue Caliper 2016-BMW 320i xDrive Blue Caliper 2016-BMW 328d xDrive Blue Caliper 2014-BMW 328i 2012-BMW 328i Blue Caliper 2013-BMW 328i M Sport 2016-BMW 328i GT xDrive Blue Caliper 2014-BMW 328i xDrive Blue Caliper 2013-BMW 330i M Sport 2017-BMW 335d xDrive 2013-BMW 335i Sedan 2012-BMW 335i 2013-BMW 335i Blue Caliper 2013-BMW 335i M Sport 2013-BMW 335i Blue Caliper 2014-BMW 335i 2014-BMW 335i M Sport 2014-BMW 335i 2015-BMW 335i Blue Caliper 2015-BMW 335i M Sport 2015-BMW 335i GT xDrive 2014-BMW 335i GT xDrive Blue Caliper 2014-BMW 335i GT xDrive M Sport 2014-BMW 335i GT xDrive 2015-BMW 335i GT xDrive Blue Caliper 2015-BMW 335i GT xDrive M Sport 2015-BMW 335i GT xDrive 2016-BMW 335i xDrive 2013-BMW 335i xDrive Blue Caliper 2013-BMW 335i xDrive M Sport 2013-BMW 340i 2016-BMW 340i GT xDrive 2017-BMW 340i xDrive 2016- BMW M235i 2014-BMW M235i xDrive 2015-BMW M3 2015-BMW M4 2015-BMW 428i Blue Caliper 2014-BMW 428i M Sport 2016-BMW 428i Gran Coupé Blue Caliper 2015-BMW 428i Gran Coupé M Sport 2016-BMW 428i xDrive Blue Caliper 2014-BMW 428i xDrive M Sport 2016-BMW 428i xDrive Gran Coupé Blue Caliper 2015-BMW 428i xDrive Gran Coupé M Sport 2016-BMW 430i M Sport 2017-BMW 430i Gran Coupé M Sport 2017-BMW 430i xDrive M Sport 2017-BMW 430i xDrive Gran Coupé M Sport 2017-BMW 435i Blue Caliper 2014-BMW 435i 2014-BMW 435i M Sport 2014-BMW 435i Gran Coupé 2015-BMW 435i Gran Coupé Blue Caliper 2015-BMW 435i Gran Coupé M Sport 2015-BMW 435i xDrive 2014-BMW 435i xDrive Blue Caliper 2014-BMW 435i xDrive M Sport 2014-BMW 435i xDrive Gran Coupé 2015-BMW 435i xDrive Gran Coupé Blue Caliper 2015-BMW 435i xDrive Gran Coupé M Sport 2015-BMW 440i 2017-BMW 440i Gran Coupé 2017-BMW 440i xDrive 2017-BMW 440i xDrive Gran Coupé 2017-BMW ActiveHybrid 3 2013-BMW ActiveHybrid 3 Blue Caliper 2013-BMW ActiveHybrid 3 M Sport 2013-BMW i8 2015-. .

Performance Friction PFC Brake Pads 1656.XX.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  PFC 11 Compound A new generation sprint and medium distance friction compound, PFC 11 gives you the ultimate in control with superior disc conditioning. Developed from their ultra-popular 01 compound, PFC 11 has improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance-oriented PFC 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds, PFC 08 came to fame in Endurance sports car and GT racing due to its high performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, featuring excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds, easily matching the wear characteristics of competitors' endurance materials but with much higher bite and more consistent performance across a broad temperature range. FITMENTS: BMW F87 M2 BMW F80 M3 BMW F82 M4 BMW M135i / M140i F20/F21 2011-BMW M2 2016-BMW M240i 2017-BMW M240i xDrive 2017-BMW 228i Blue Caliper 2014-BMW 228i xDrive Blue Caliper 2015-BMW 320i Blue Caliper 2016-BMW 320i xDrive Blue Caliper 2016-BMW 328d xDrive Blue Caliper 2014-BMW 328i 2012-BMW 328i Blue Caliper 2013-BMW 328i GT xDrive Blue Caliper 2014-BMW 328i xDrive Blue Caliper 2013-BMW 330i Blue Caliper 2017-BMW 335d xDrive 2013-BMW 335i Sedan 2012-BMW 335i Blue Caliper 2013-BMW 335i GT xDrive Blue Caliper 2014-BMW 335i xDrive Blue Caliper 2013-BMW 340i Blue Caliper 2016-BMW 340i xDrive Blue Caliper 2016- BMW M235i Racing 2014-BMW M235i xDrive 2015-BMW M3 2015-BMW M4 2015-BMW 428i Blue Caliper 2014-BMW 428i Gran Coupe Blue Caliper 2015-BMW 428i xDrive Blue Caliper 2014-BMW 428i xDrive Gran Coupe Blue Caliper 2015-BMW 430i Blue Caliper 2017-BMW 430i Gran Coupe Blue Caliper 2017-BMW 430i xDrive Blue Caliper 2017-BMW 430i xDrive Gran Coupe Blue Caliper 2017-BMW 435i Blue Caliper 2014-BMW 435i Gran Coupe Blue Caliper 2015-BMW 435i xDrive Blue Caliper 2014-BMW 435i xDrive Gran Coupe Blue Caliper 2015-BMW 440i Blue Caliper 2017-BMW 440i Gran Coupe Blue Caliper 2017-BMW 440i xDrive Blue Caliper 2017-BMW 440i xDrive Gran Coupe Blue Caliper 2017-BMW ActiveHybrid 3 Blue Caliper 2013-

Race Technologies Racing Brake Pads RT RE10 COMPOUND1 RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, Race Technologies RE10 offers consistent performance in the most demanding environments. Typical applications include professional endurance racing, club racing, and HPDE on high braking demand platforms. RACING PAD NOTES: Running a "racing use only" pad on the street could produce excessive noise and dust. Rotor wear could be accelerated if driven at consistently cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are tested on a brake dynamometer over repeated brake applications to test the materials in a controlled environment. Real-world wear rates and temperatures will be influenced by car setup, grip levels, track layout and other variables. Note 1: "RE" denotes a "racing use only" pad compound.

Race Technologies Racing Brake Pads RT RE10 COMPOUND1 RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, Race Technologies RE10 offers consistent performance in the most demanding environments. Typical applications include professional endurance racing, club racing, and HPDE on high braking demand platforms. RACING PAD NOTES: Running a "racing use only" pad on the street could produce excessive noise and dust. Rotor wear could be accelerated if driven at consistently cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are tested on a brake dynamometer over repeated brake applications to test the materials in a controlled environment. Real-world wear rates and temperatures will be influenced by car setup, grip levels, track layout and other variables. Note 1: "RE" denotes a "racing use only" pad compound.

Race Technologies Racing Brake Pads RT RE10 COMPOUND1 RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, Race Technologies RE10 offers consistent performance in the most demanding environments. Typical applications include professional endurance racing, club racing, and HPDE on high braking demand platforms. RACING PAD NOTES: Running a "racing use only" pad on the street could produce excessive noise and dust. Rotor wear could be accelerated if driven at consistently cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are tested on a brake dynamometer over repeated brake applications to test the materials in a controlled environment. Real-world wear rates and temperatures will be influenced by car setup, grip levels, track layout and other variables. Note 1: "RE" denotes a "racing use only" pad compound.