992 GT3 Cup Car

AP Racing Radi-CAL 380mm Competition Brake Kit (Front) FIT The Following Cars Porsche 992.1 GT3 Cup Car Porsche 991.2 GT3 Cup Car Complete rear AP Racing Radi-CAL Competition Brake Kit. Fits the Porsche 991.2 and 992.1 GT3 Cup car. Complete front AP Racing by Essex Radi-CAL Competition Brake Kit for the Porsche 991.2 GT3 Cup (2017-2020): Eliminates the need to remove the caliper for pad changes Direct bolt-on to OE Porsche Motorsport 991.2 Cup uprights with included spacers AP Racing Radi-CAL CP9665 calipers with durable ventilated stainless steel pistons and anti-knockback springs Hard anodized caliper finish that is resistant to wear and deterioration at elevated temperatures 380mm x 32mm 2-piece floating 72-vane J Hook Discs with D54 radial depth Innovative spline drive system further mitigates knockback and offers highly consistent pedal effort Designed for: club racing, time trial, autocross, HPDE Every component designed to resist the heat of extended track sessions Works with standard OE master cylinder sizes Includes pad tension kit (eliminates noise) and disc burning at no additional cost Designed to work with Ap Racing front Brake Kit

AP Racing Radi-CAL 380mm Competition Brake Kit (Rear) Fit The Following Cars Porsche 992.1 GT3 Cup Car Porsche 991.2 GT3 Cup Car Complete rear AP Racing Radi-CAL Competition Brake Kit. Fits the Porsche 991.2 and 992.1 GT3 Cup car. Eliminates the need to remove the caliper for pad changes AP Racing Radi-CAL with durable ventilated stainless steel pistons and anti-knockback springs Hard anodized caliper finish that is resistant to wear and deterioration at elevated temperatures Large selection of brake pad options from all major pad manufacturers Fits OE 18" GT3 Cup wheels without a spacer 380x32mm, 72 vane AP Racing disc vs. only 48 cooling vanes in the OE disc Works with standard OE master cylinder sizes Every component designed to resist the heat of extended track sessions Designed for: club racing, time trial, autocross, HPDE Includes pad tension kit (eliminates noise) and disc burning at no additional cost Designed to work with Ap Racing front Brake Kit

Girodisc Porsche 992 GT3 Cup Rear Rotors These Girodisc A2-287 2-piece rear rotors match the front A1-287 kit for the Porsche 992 GT3 Cup iron-brake configuration. Floating assemblies reduce unsprung mass and maintain factory braking balance. A2-287 Vehicle Fitment Porsche 992 GT3 Cup – Rear (iron brakes) Durable Rings & Floating Hardware High‑carbon iron rings with curved vanes improve thermal stability and airflow. Reusable aluminum hats and spring‑preloaded hardware provide controlled float with street‑friendly noise characteristics. Features Direct bolt‑on; uses OEM calipers 2‑piece floating construction 6061‑T6 hats; cadmium‑plated hardware Manufactured and assembled in Bellingham, WA Sold/priced per pair

A1-287 Girodisc Porsche 992 GT3 Cup Front Rotors These Girodisc A1-287 2-piece front rotors are a direct replacement for the Porsche 992 GT3 Cup iron-brake setup. Fully floating construction reduces unsprung and rotational mass while keeping OEM calipers, ABS, and brake bias intact. Vehicle Fitment Porsche 992 GT3 Cup – Front (iron brakes) High-Carbon Rings & Curved-Vane Cooling Proprietary high‑carbon iron rings with curved internal vanes act as a centrifugal pump to draw cooling air through the disc during heavy use. Reusable aluminum hats accept replacement rings when service is due. Features Direct OE replacement; no modifications required 2‑piece floating design reduces unsprung & rotational mass 6061‑T6 aluminum hats; cadmium‑plated hardware Manufactured and assembled in Bellingham, WA Sold/priced per pair

Porsche 992 GT3 Cup Front Replacement Rings Restore world-class braking performance to your Porsche 992 GT3 Cup with the Girodisc D1-287 Front Replacement Rings. Engineered for endurance and precision, these 410x36mm iron rotor rings are direct replacements for Girodisc two-piece front rotors used in competition or iron conversion applications. Built to withstand extreme thermal loads and track punishment, the D1-287 rings deliver consistent, fade-free braking lap after lap. Each ring is machined from Girodisc’s proprietary U.S.-poured high-carbon cast iron, chosen for its exceptional strength, heat resistance, and stability. Designed with 48 curved directional vanes, these rotors channel air efficiently for superior cooling and reduced thermal stress. The result is braking performance you can rely on through every corner, every lap, every session. Features and Benefits Direct replacement rings for Girodisc 992 GT3 Cup 410x36mm two-piece front rotors Machined from proprietary U.S.-poured high-carbon cast iron for maximum thermal stability 48 curved directional vanes for optimal cooling and consistent performance Lightweight two-piece floating design reduces unsprung mass and enhances handling Includes all new hardware: drive pins, bolts, and washers Precision machined, balanced, and assembled in the USA Vehicle Fitment 2022+ Porsche 911 GT3 Cup (992) These replacement rings are designed exclusively for Girodisc aluminum hats. They will not fit OEM or other aftermarket hat systems. This set replaces the original Girodisc front assemblies used in GT3 Cup and iron conversion configurations. Why Choose Girodisc Girodisc has set the standard for performance braking systems through precision engineering and uncompromising quality. Each rotor ring is developed for motorsport environments, ensuring consistent friction characteristics and resistance to thermal cracking under the most demanding conditions. With the D1-287 rings installed, your Porsche 992 GT3 Cup will brake with the same confidence and control that define true race-winning performance. FAQs Do these include the aluminum hats?No. The D1-287 kit includes only the iron rotor rings and a complete hardware kit. Your existing Girodisc hats are reused. Can I install these with factory Porsche rotors?No. Girodisc replacement rings are engineered specifically for Girodisc hats and will not fit OEM or other aftermarket systems. Are the rotors directional?Yes. Each ring features curved internal vanes that must be installed on the correct side for optimal airflow and cooling efficiency. What’s included?Two 410x36mm front rotor rings (left and right) and a full hardware kit including new drive pins, bolts, and washers. Ready to Refresh? Bring your Porsche 992 GT3 Cup back to full braking potential with Girodisc D1-287 Front Replacement Rings. Designed for uncompromising performance on the track, these rotor rings deliver the cooling, balance, and durability needed for every race-winning lap. Order your set today from Competition Motorsport and keep your GT3 Cup braking with factory precision and motorsport strength.

Ferodo FRP3110G DS3.12 Porsche Front Brake Pads Designed for use with iron brake rotors only. Ferodo 11 FRP3110GB-N DS3.12 Front Brake Pad Fitment: Porsche 992 GT3 Cup Car (Front) Compound: DS3.12 The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo FRP3110G DS3.12 Relative Performance Chart  Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FRP3110G DS3.12 Friction Coefficient (Mu) Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FRP3110G DS3.12 Operating Temperature Chart

Cobalt Brake Pads Porsche 992 GT3 Cup Car Racing Brake Pads (Front) - 25mm Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Ferodo 11 FRP1078GB-N DS3.12 Porsche 992 GT3 Cup Car Rear Brake Pads   Ferodo 11 FRP1078GB-N DS3.12 Porsche 992 GT3 Cup Car Rear Brake Pad Fitment: Porsche 992 911 GT3 Cup Car Ferodo Brake Pad Compound DS3.12 The DS3.12 brake pad compound is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. Ferodo 11 FRP1078GB-N Comparison Chart The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same. This gives you tremendous consistency and repeatability. Ferodo 11 FRP1078GB-N Coefficient of Friction (Mu) Chart The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. In dyno testing, the Ferodo DS3.12 has shown superior wear rates compared to the other Ferodo compounds, while remaining kind to brake rotors. Ferodo 11 FRP1078GB-N Temperature Chart We believe the Ferodo DS3.12 will become the gold standard to which other race compounds will be compared.

PFC Brake Pads 7797.xx.xx.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. The folks at PFC take pride in the accomplishments of the drivers and race teams that run PFC products. With More Championships than Any Other™, PFC are among the best racing brakes on the market. Known around the globe in the sports car market, PFC is involved with numerous sports car events including: IMSA Continental Tire Sports Car Challenge Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge and on-track experience, PFC's process enables them to provide you with the proper friction every time. NO COMPROMISES All PFC pad compounds have been thoroughly processed and are “race ready”. That means very easy burnishing to bed pads and rotors. PFC 82 Compound 82 Compound is the new standard for PFC endurance compounds. It has gained an immediate following upon release in the endurance sportscar world after its debut win in the 2023 24hrs of Nürburgring. The 82 is a degressive pad specifically designed to work together with ABS to give superior control and a smooth release, minimizing lockups. The 82 compound has an extremely low wear rate while simultaneously being extra gentle on discs, making this compound the ultimate endurance option. Long distances aren’t this pad’s only strong suit though! With a very high initial bite, this pad can also be used for medium distance sprint applications, where ABS compatibility and a low wear rate are requested. The 82 compound was developed by working closely with experienced teams and drivers to ultimately tailor this pad to have the perfect combination of durability and speed! PFC 39 Compound 39 compound is our newest choice for sprint and semi-endurance races in GT, TCR, NASCAR or rally tarmac/gravel. 39 has a high initial bite and the highest average torque of any PFC compound. Recommended for high downforce and severe environments. Very good retardation. Release and modulation characteristics are its best qualities, providing excellent control to the drivers, and avoiding lock-up. There is virtually no torque rise with temperature. A very positive and firm pedal when braking is another of its advantages. 39 offers excellent wear, better than 13, 15 or 333. Compound 39 is designed to handle the most severe applications. The winner’s choice! PFC 13 Compound The PFC 13 is the new generation of ultimate high bite/high friction performance. Performance Friction's 13 compound has been developed with increased bite, excellent modulation, and superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. It is the ultimate combination of high bite and infinite control. Ideal where high bite in the first one-third of the stop is desired. PFC 13 exhibits wear on a par with PFC’s legendary 01 compound, but will operate at higher temperatures if called on. PFC 13 has a very high threshold for fade resistance. Out of all the high bite/high torque pads on the market, PFC 13 has been shown to have some of the lowest taper wear in a properly designed race caliper. PFC 08 Compound The 08 compound has gained immediate favor in endurance sportscar and GT racing and also in endurance production car racing due to its performance in applications where smooth initial bite is a must. 08 has a slight friction rise with temperature with excellent release and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite. PFC 01 Compound 01 race compound is one of the most accepted in the PFC’s arsenal, and has become the standard by which all brake pads are judged. 01 has good initial bite, with very little torque rise with temperature. At the end of the stop, 01 compound has less torque scatter than the competition for improved modulation with excellent release. 01 compound has good disc conditioning properties with low wear. 01 compound is one of PFC’s most popular race compounds, and wins more World and National championships annually than any other brake pad on the market. Performance Friction PFC 7797 Brake Pad Fitment Alpine A110 Cup / GT4 Race GT4 – 29mm Aston Martin Vantage V12 (sprint) Race GT3/GT4 – 25mm Aston Martin Vantage V12 (endurance) Race GT2/GT3 – 29mm Audi R8 LMS (2012-15) Race GT3 – 25mm Dodge Viper GTS-R (sprint) Race GT – 29mm Dodge Viper GTS-R (endurance) Race GT – 29mm Ferrari 360/430 Race GT / GT2 Ferrari 458 Race GT2 – 29mm Ferrari 458 (endurance) Race GT3 – 29mm Ginetta LMP3 (2015-) Race GT3 – 29mm Hyundai Elantra N TCR (2020-) Race TCR – 25mm Hyundai i30 N TCR (2017-) Race TCR – 25mm Hyundai Veloster TCR (2017-) Race TCR – 25mm Lamborghini Gallardo LP 600 (2012-) Race GT3 – 29mm Ligier JS P3 (2017-) Race F/R LMP3 – 25mm Maserati GranTurismo MC Trofeo Race GT4 – 29mm Mercedes SLR (Sprint) Race GT3 – 25mm Mercedes SLS (sprint) Race GT3 – 25mm Porsche 992 GT3 Cup Race GT3 – 25mm Porsche 996 GT3/RS (1998-04) Race GT3 – 29mm Porsche 996 GT3/RS (1998-04 sprint) Race GT3 – 29mm Porsche 997 GT3 Grand AM (2008-10 endurance) Race Cup – 20mm Porsche 997 GT3 Grand AM (2008-10 sprint) Race Cup – 20mm Porsche 997 GT2 (2007> sprint) Race GT2 – 29mm Porsche 997 GT2 (2007> endurance) Race GT2 – 29mm Porsche 997 GT3 Grand AM / R / RSR (2007>) Race GT3 – 29mm Renault Alpine A110 Cup Race GT4 – 29mm Saleen S7-R (sprint) Race GT – 29mm

PFC Front Slotted Replacement Disc V3 Porsche 992 GT3 Cup/718 GT4 RS Clubsport Dimensions: 380mm diameter, 34mm thickness Brake disc only, does not include brake hat (fits on OEM hat). Not for use in official Porsche Carrera Cup championships. PFC has released their new V3 disc and hat technology. This advanced design features a patented attachment mechanism using a retention ring to hold the hat and disc together. This eliminates the need for torque wrenches, giving you a no-hassle solution to the need for a quick, efficient disc replacement. In addition to being convenient, PFC's new V3 technology is much lighter than previous designs, reducing unsprung weight on your car. This V3 disc retention method is based on the use of a two- or three-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat. PFC V3 Disc Features: Reduced mass on disc connecting flanges, which reduces thermal distortion (more specifically, coning) at race temperatures. Reduced coning allows the pads to sit flatter on the disc, which better utilizes the available radial depth. There is better pad force distribution and the brakes will run cooler, reducing hot spots on the disc. This will also have the benefit of reduced taper wear of the pads. More heat will be contained in the brake faces because there is less of a heat sink in the flanges. This reduces thermal stress at the ID of the disc and reduces the chance of thermal cracking to occur. Consistent disc float from race beginning to end. As a race progresses with a bobbin disc, float will often be reduced when a bobbin is no longer sitting square in the disc. Reduced float will increase piston knockback, increase pedal travel and add vibration. Reduced complexity. The number of brake assembly parts is reduced from 38+ for a bobbin drive disc to just 3 in a V3 disc assembly Decreased assembly time. You can assemble a V3 race disc in a matter of seconds. Part numbers: 380.34.0052.452 380.34.0052.462

PFC Rear Slotted Replacement Disc V3 Porsche 992 GT3 Cup/718 GT4 RS Clubsport Dimensions: 380mm diameter, 32mm thickness, 52mm radial depth Brake disc only, does not include brake hat (fits on OEM hat). Not for use in official Porsche Carrera Cup championships. PFC has released their new V3 disc and hat technology. This advanced design features a patented attachment mechanism using a retention ring to hold the hat and disc together. This eliminates the need for torque wrenches, giving you a no-hassle solution to the need for a quick, efficient disc replacement. In addition to being convenient, PFC's new V3 technology is much lighter than previous designs, reducing unsprung weight on your car. This V3 disc retention method is based on the use of a two- or three-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat. PFC V3 Disc Features: Reduced mass on disc connecting flanges, which reduces thermal distortion (more specifically, coning) at race temperatures. Reduced coning allows the pads to sit flatter on the disc, which better utilizes the available radial depth. There is better pad force distribution and the brakes will run cooler, reducing hot spots on the disc. This will also have the benefit of reduced taper wear of the pads. More heat will be contained in the brake faces because there is less of a heat sink in the flanges. This reduces thermal stress at the ID of the disc and reduces the chance of thermal cracking to occur. Consistent disc float from race beginning to end. As a race progresses with a bobbin disc, float will often be reduced when a bobbin is no longer sitting square in the disc. Reduced float will increase piston knockback, increase pedal travel and add vibration. Reduced complexity. The number of brake assembly parts is reduced from 38+ for a bobbin drive disc to just 3 in a V3 disc assembly Decreased assembly time. You can assemble a V3 race disc in a matter of seconds. Part numbers: 380.32.0052.452 380.32.0052.462

Pagid Racing Brake Pads Shape No. 8087 Fits the Following Vehicles: Make Model Build (Year) Front Rear Aston Martin Vantage V8 GT4 ProDrive [race car] 6 piston front 2011 - 17     X Aston Martin Vantage V8 GT4 ProDrive [race car] 6 piston front. larger rear caliper 2011 - 17     X Aston Martin Vantage V12 GT3 [race car] 2013 - 14     X Aston Martin Vantage V12 GT3 [race car] sprint 2015 - 17     X Audi R8 LMS Ultra GT3 [race car] 2012 - 15     X Hyundai i30 N TCR race car [Brembo caliper] 2017 -     X Lamborghini Gallardo LP 600 GT3 [race car] 2013 - 15     X Maserati Trofeo MC 2013 +     X Maserati Trofeo GT4 2016 +     X Hyundai Veloster N TCR 2018 +     X Porsche 992 GT3 Cup 2021 +     X Porsche 992 GT3 Cup [Endurance] 2021+     X Fits the Following Calipers: Make Type Remarks Shape No. Brembo 07.7293 6-piston [type 164 or B24] 20mm, 22mm, 25mm, 29mm, 31mm 2488, 2687, 8038, 8087, 8173 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound: The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 2E Compound: RST 2E is perfect as a front axle application in mid-endurance GT and touring car racing, in the range of 2-6h race duration. Front and rear axle application on rally race cars. RST 2 and RST 2E are semi-metallic resin bonded materials containing steel fibers. Cold friction and initial bite make these materials most appropriate for rallying and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 5 Compound: Developed for high friction level sprint applications where extreme thermal stability is key. Comes in a variety of different pad shapes used in GT racing front axles, touring car front axles, rally sports, especially FIA Rally 3, Rally 2, Rally 1, and RX Rallycross. Excellent fade resistance as well as one of the highest initial bite and friction levels of the PAGID Racing compound portfolio. RST 5 is suitable for high-thermal load applications, making it a top choice for sprint racers in terms of performance. RST 5 delivers the ideal balance between maximum performance and excellent modulation.

Pagid Racing Brake Pad Shape No. 8287 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 992 GT3 Cup 2021 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RST D1 Compound: Pagid RST D1 is especially for race cars with high aerodynamic downforce levels and with a wide brake balance range. Specifically developed for rear axle applications. The RST D1 compound provides benefits in terms of vehicle stability during the turn-in and corner-exit unloading of the front axle.

Performance Friction PFC Brake Pads 7700.XX.YY.44 Race-Ready, High-Performance Brake Pads Performance Friction 7700 Brake Pad Fitments: Alpine A110 Cup / GT4 – Rear Race – 25mm Aston Martin Vantage GT3 (inc endurance) – Rear (2018-23) Race – 25mm Aston Martin Vantage GT3 (inc endurance) – Rear (2024-) Race – 26mm Aston Martin Vantage GT4 – Rear (2018-) Race – 20mm Audi R8 LMS GT3 (2016-) – Rear Race – 25mm Audi R8 LMS GT2 / GT4 (2022-) – Rear Race – 25mm Bentley Continental GT3 (inc endurance) – Rear Race – 25mm BMW M4 GT3 / GT4 (2023-) – Rear Race – 25mm BMW M8 GTE – Rear Race – 25mm Chevrolet Corvette C7 GT3 – Rear Race – 25mm Citroen C3 R5 – Front & rear Rally – 16mm Citroen S1600 Rally – 16mm Citroen DS3 R3T (Gravel & Tarmac) – Front Rally – 16mm Citroen DS3 R5 (Gravel & Tarmac) – Front & Rear Rally – 16mm Ferrari 296 GT3 (2023-) Rear Race – 25mm Ferrari 355 (Challenge 1993-) – Front & Rear F355 Race – 25mm Ferrari 360/430/458 Race – 25mm Ferrari 360/430 (Challenge) Rear Race – 16mm Ferrari 458 (GT2 / GT3 Sprint & Endurance) Race – 25mm Ferrari 488 (GT3 Sprint & Endurance) Race – 25mm Ferrari 488 2017- (GTE) Race – 25mm Fiat Punto S1600 (Gravel & Tarmac) – Front & Rear Rally – 16mm Ford Fiesta R2 2016- (Tarmac) – Front Rally – 16mm Ford Fiesta S2000 (Tarmac) – Front & Rear Rally – 18mm Ford Focus WRC (Gravel) – Front & Rear Rally – 18mm Ford Mustang Boss 302S (2013-) – Front Ford Mustang GT3 (2022-) – Front Race – 25mm Ford Mustang GT3 (2024-) – Rear Race – 26mm Ginetta G50 (Ginetta supply) Race – 16mm Ginetta G55 GT4 (Endurance) – Rear Race – 16mm Ginetta G56 GT4 (Endurance) – Rear Race – 20mm Honda NSX GT3 (2022-) – Rear Race – 25mm KTM Xbow GT4 (2015-) – Rear Race – 25mm Lamborghini Gallardo GT3 / LP600 (2012) – Rear Race – 25mm Lamborghini Huracán GT3 – Rear 2017-2022 Race – 25mm Lamborghini SuperTrofeo – Rear 2017-2022 Race – 25mm Lexus RC F GT3 – Rear Race – 25mm Lotus Evora Race – 25mm McLaren 570S GT4 (2019-) – Rear Race – 20mm McLaren 650S GT3 (2015-) – Rear Race – 25mm McLaren 720S GT3 EVO – Rear Race – 26mm McLaren MP4-12C GT3 (2013-) – Rear Race – 25mm McLaren Artura GT4 (2033-) – Rear Race – 20mm Mercedes-AMG GT2 Race – 25mm Mercedes-AMG SLR / SLS (Sprint) GT3 / GT4 Race – 25mm Mercedes-AMG SLR / SLS (Endurance) GT3 / GT4 Race – 25mm NASCAR 20mm / 25mm Peugeot 208 R2 – Front Rally – 16mm Peugeot 208 Rally 4 (2020-) Front Rally – 16mm Peugeot 208 T16 R5 – Front & Rear Rally – 16mm Porsche 991 GT3 R (2019-) Rear Race – 25mm Porsche 991 RSR GTE (2017-) Rear Race – 25mm Porsche 992 GT3 Cup Rear Race – 22mm Porsche 992 GT3 R (2023-) Race – 25mm Porsche 996 GT3/RS (1998-04 inc Sprint) Rear Race – 25mm Porsche 997 GT3 Grand AM (2008-10 Sprint & Endurance) Rear Race – 20mm Porsche 997 GT2 (2007- Sprint & Endurance) Rear Race – 25mm Porsche 997 GT3 Grand AM / R / RSR (2007-) Rear Race – 25mm Renault Clio 1 Group A (Tarmac) Rally – 16mm Renault Clio S1600 (Tarmac) Rally – 16mm Riley & Scott Mark III Race – 25mm Skoda Fabia R5 Evo 2020- (Gravel & Tarmac) – Front & rear Rally – 16mm Subaru Impreza Prodrive P1 (Alcon upgrade) Rally – 16mm Suzuki Swift S1600 (Gravel & Tarmac) Rally – 15mm Toyota GT86 R3 (Gravel & Tarmac) Rally – 16mm Toyota Supra GT4 Race – 25mm VW Polo R5 (Gravel & Tarmac) – Front & Rear Rally – 16mm Performance Friction Corporation (PFC) Brake Pads 7700.XX.YY.44 deliver unmatched stopping power, precision control, and proven durability for sports car racing. Engineered with over 35 years of friction expertise, these premium brake pads are built to perform at the highest levels of motorsport competition. Each PFC brake pad is manufactured using proprietary friction materials and a zero-compromise design process to ensure consistent, fade-free braking under extreme track conditions. All PFC pad compounds are “Race Ready,” offering a fast and easy bed-in process with rotors for immediate performance gains. Trusted by Championship Teams Worldwide PFC Brake Pads are trusted by professional drivers and racing teams competing in some of the world’s most demanding series, including: NTT IndyCar Series IMSA Continental Tire SportsCar Challenge Porsche Cup Racing Pirelli World Challenge ...and many more! Why Choose PFC Brake Pads 7700.XX.YY.44? High-performance, race-proven friction materials Consistent pedal feel and fade resistance Quick, reliable burnishing with minimal downtime Used by winning teams with More Championships than Any Other™ When it comes to professional-grade racing brakes, PFC Brake Pads 7700.XX.YY.44 are the performance upgrade your car needs. Join the global community of champions who trust PFC for faster laps, better control, and superior stopping power. PFC 11 Compound A new generation sprint and medium-distance friction compound, PFC 11 gives you the ultimate in control and modulation, along with superior disc conditioning. Developed from PFC's ultra-popular 01 compound with improved bite, modulation, and release characteristics. PFC 11 is ultra-smooth, developed to reduce wheel locking at the end of braking while giving more hot and cold bite than the endurance-oriented 08 compound. Brake with ultimate control, modulation, and confidence. PFC 19 Compound Performance Friction Brake Compound 19 is a specially engineered compound tailored for open-wheel and lightweight race cars, delivering precise and effortless control thanks to its slightly rising torque curve and lower coefficient of friction. This compound excels in endurance racing scenarios, making it an ideal choice for the rear axle of GT cars—particularly front-engine GTs and front-wheel-drive platforms—where balanced brake performance and long pad life are critical. Designed to withstand the rigors of 24-hour races, Compound 19 offers exceptional durability, often eliminating the need to change rear axle pads throughout the event. PFC 39 Compound Performance Friction 39 compound is PFC's newest choice for sprint and semi-endurance races in GT, TCR, NASCAR or rally tarmac/gravel. PFC 39 has a high initial bite, with the highest average torque of any PFC compound. Recommended for high downforce and severe environments. Release and modulation characteristics are its best qualities, providing excellent control to help drivers avoid lock-up. There is virtually no torque rise with temperature. A very firm, positive pedal when braking is another of its advantages. PFC 39 offers excellent wear, better than PFC 13, 15 or 333. Compound 39 is designed to handle the most severe applications. PFC 84 Compound PFC 84 is a new rear endurance compound in the PFC lineup. It shook the endurance sports car world when it took its first win upon release at the 2023 24hr of Nürburgring. This pad is heavily degressive, limiting braking power as pedal pressure increases, to work together with modern ABS systems, providing a stable, controllable rear end and minimized lockups. Its degressive curve allows this pad to not only be the perfect low wear endurance option, but also can be used in medium distance applications. Like its front counterpart (PFC 82) the PFC 84 compound has an extremely low wear rate and is gentle on discs.  PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates.

Cobalt Brake Pads Porsche 992 GT3 Cup Car Racing Brake Pads (Rear)  Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Girodisc Brake Pad Spreader The Right Tool for the Job This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment. No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers. The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable. Built Like a Tank. Works Like a Charm. Insert the spreading plates one way for wider six-piston calipers, or turn the spreader 90o and use the plate sides for four-piston calipers. The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. It will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.