F40

Girodisc Rear Brake Rotors – Ferrari F40 The Girodisc A2-221 Rear Rotor Kit is a precision-engineered, direct replacement for the factory rear rotors on the legendary Ferrari F40. Designed to deliver superior heat management, reduced unsprung mass, and uncompromised performance, these lightweight two-piece rotors bring modern racing technology to one of the most iconic supercars ever built. Modern Engineering for a Legendary Supercar Each Girodisc A2-221 rotor combines a CNC-machined 6061-T6 aluminum hat with Girodisc’s proprietary cast-iron friction ring. The floating two-piece design allows the iron ring to expand under heat without warping or coning, maintaining consistent pedal feel and reducing stress on the braking system. The curved-vane internal geometry acts as a centrifugal air pump, improving airflow through the rotor for cooler, more stable braking under extreme conditions. Features • Direct replacement for OEM Ferrari F40 rear rotors• Two-piece floating design: cast-iron friction ring + 6061-T6 aluminum hat• Curved-vane internal construction for enhanced cooling efficiency• Floating mount system with cadmium-plated drive pins and anti-noise spring washers• Class 12.9 cap screws and hardened washers for strength and reliability• Reusable aluminum hats – replace only the iron rings when needed• Reduces unsprung weight and improves handling response• Sold/priced per pair Vehicle Fitment • Ferrari F40 (1987–1992) – Rear• Direct OEM replacement, compatible with factory calipers and ABS• No modifications required for installation Girodisc A2-221 Rear Rotors – Ferrari F40 FAQs Do these rotors fit directly without modification? Yes. The Girodisc A2-221 rotors bolt directly to the factory calipers and hubs without requiring any changes to your OEM components. What makes these rotors better than stock? The two-piece floating design reduces weight, improves cooling, and prevents distortion under high temperatures for more consistent braking and longer life. Are replacement rings available? Yes. Girodisc offers replacement cast-iron rings so you can reuse your existing aluminum hats and hardware, reducing long-term maintenance costs. Do these rotors make noise? No. Anti-noise spring washers are used to eliminate rattling at low speeds while maintaining full float during heat expansion. Are they sold individually or as a set? The Girodisc A2-221 rear rotors are sold as a matched pair for the rear axle. Will they affect braking balance or ABS? No. These rotors maintain the factory bias and ABS function while offering improved performance and reliability. Upgrade your Ferrari F40 with the Girodisc A2-221 2-Piece Rear Brake Rotors—modern performance engineering built to complement the timeless design and racing pedigree of Maranello’s most celebrated icon.

Ferrari F40 Front Rotors Bring your legendary Ferrari F40 up to modern braking performance with Girodisc’s precision-engineered 2-piece floating front rotors. Designed as a direct bolt-on replacement for the factory rotors, these lightweight assemblies deliver vastly improved heat control, reduced fade, and quicker pedal response—without altering factory brake balance or ABS calibration. Modern Engineering for an Iconic Supercar Handcrafted in the USA, each Girodisc rotor is built from premium materials to match the precision of the F40 itself. The aluminum hat is CNC-machined from 6061-T6 aircraft-grade billet and hard-anodized for corrosion resistance. The iron rotor ring is cast from Girodisc’s proprietary high-carbon alloy, developed to withstand extreme temperatures without distortion. The curved vane internal structure acts like a centrifugal fan, pulling cool air through the rotor for exceptional thermal management on both street and circuit. Girodisc A1-221 Vehicle Fitment Ferrari F40 (1987–1992) Ferrari F40 LM / Competizione variants (with OEM brake configuration) Features Direct OEM Replacement: Bolts to factory hubs and works perfectly with OEM calipers—no modifications required. Lightweight Two-Piece Construction: Reduces unsprung and rotational mass, sharpening suspension response and steering precision. Curved Vane Cooling Design: Internal directional vanes actively channel airflow through the rotor to dissipate heat efficiently. Floating Mount Hardware: Twelve cadmium-plated steel drive pins with spring washers allow for controlled thermal expansion without rattle or vibration. Serviceable Design: Replace only the cast-iron rings when worn—the aluminum hats are fully reusable. Proudly Made in the USA: Each component is designed, cast, machined, and assembled domestically under strict quality control. FAQs –  Girodisc A1-221 Front Rotors for Ferrari F40 Do these rotors fit OEM F40 calipers? Yes, they’re a direct fit for the original Ferrari F40 braking system and hardware. How do they compare to OEM rotors? Girodisc rotors offer superior cooling, lower weight, and better resistance to fade—without altering the car’s balance or character. Can they handle high-temperature track use? Absolutely—these rotors are designed to perform flawlessly in extended track sessions and racing conditions. Do they retain the classic F40 pedal feel? Yes. The floating design maintains a consistent pedal and bite even as temperatures rise, delivering modern performance while preserving the F40’s authentic driving dynamics. Upgrade your Ferrari F40 with Girodisc’s 2-piece floating front rotors for performance that matches its legend. Expect faster cooling, reduced fade, and pure, confidence-inspiring braking on every drive.

GiroDisc Replacement Rotor Rings for Brembo / StopTech 332x32mm Big Brake Kits Replacement Rotor Rings for GiroDisc Two-Piece Brake Rotors Keep your GiroDisc-equipped Brembo or StopTech big brake kit performing at its best with genuine GiroDisc 332x32mm replacement rotor rings. Designed as direct replacements for worn GiroDisc rotor discs, these rings reuse your existing GiroDisc aluminum hats and floating hardware for a cost-effective brake refresh. Fits: Brembo and StopTech 332x32mm Big Brake Kits equipped with compatible GiroDisc two-piece rotors. Important: These are replacement rotor discs only. Aluminum hats are not included. GiroDisc Replacement Rotor Features 332x32mm replacement rotor rings Designed for compatible Brembo and StopTech big brake kits Direct replacement for existing GiroDisc two-piece rotor assemblies Reuses your existing GiroDisc aluminum hats Fully floating two-piece rotor design High-strength alloy steel drive pin system Designed to accommodate radial and axial thermal expansion Anti-noise spring washers help minimize floating rotor rattle Rotor-only replacement reduces long-term brake system operating costs Excellent heat management and cooling for demanding street and track use GiroDisc Floating Rotor Design GiroDisc's two-piece rotor system uses a fully floating connection between the cast-iron rotor ring and aluminum hat. High-strength alloy steel drive pins transfer braking loads while allowing the rotor to expand independently as temperatures increase under hard braking. The drive pins are manufactured by GiroDisc in the USA to its own specifications and are cadmium plated for corrosion resistance. Grade 12 cap screws, hardened washers, and anti-noise spring washers secure the assembly while allowing the necessary axial and radial float. The result is a durable, high-performance rotor system that manages heat effectively without the excessive noise commonly associated with traditional floating rotors. Replace the Wear Item, Not the Entire Rotor One of the primary advantages of the GiroDisc two-piece system is serviceability. Once the rotor rings reach their wear limit, the existing aluminum hats can be reused rather than replacing the complete rotor assembly. This significantly reduces replacement cost while maintaining the braking performance, cooling, and durability expected from GiroDisc. Authorized GiroDisc Dealer Competition Motorsport is an authorized GiroDisc dealer and one of the largest stocking GiroDisc dealers in the country. We stock a wide range of GiroDisc brake components for fast shipment and knowledgeable support. Sold and priced as a pair.

GiroDisc 0810.18 Brake Pads for 810 Shape Choose the Brake Pad Compound That Matches Your Setup This consolidated listing groups the shared 0810.18 brake pad shape into one product page with compound options available as variants. Select the pad compound that best matches your street, track, sprint, or endurance braking needs. Brake Pad Application 810 Shape Available Compound Variants GP10 Street — SKU GP10-0810.18 Important Fitment Note Confirm the exact compound, SKU, caliper, axle position, and brake pad application before ordering. Some variants share the same pad-shape code but may have application notes that differ slightly by compound. GiroDisc 0810.18 Brake Pads for 810 Shape FAQs Why are multiple SKUs combined on this listing?These options share the same GiroDisc brake pad shape code, so they are grouped together with the pad compound selected as the variant. How do I choose the correct variant?Select the compound that matches your use case, then confirm the exact SKU and application text before checkout. Are GP10, GP30, GP35, GP40, and other compounds the same pad?No. They may share the same pad shape, but the compounds are designed for different street, track, sprint, or endurance uses. Should I verify fitment before ordering?Yes. Always verify the caliper, rotor conversion, axle position, and pad-shape requirement for your specific setup. Choose the compound that fits your driving goals while keeping all matching pad-shape options in one easy-to-shop listing.

Ferodo FCP1281 Brake Pads Fitment Guide for FCP01281 Brake pad (FMSI D810) Make Model Build (Year) Front Rear Aston Martin Vanquish 03 - 08 X Audi R8 4.2 and 5.2 FSI quattro 07 - 15 X Audi R8 4.2 and 5.2 FSI quattro [ceramic brakes] 09 - 15 X Audi R8 5.2 FSI quattro (2nd generation) 15 - X Audi R8 5.2 FSI quattro (2nd generation) [ceramic brakes] 15 - X Audi R8 5.2 RWS (2nd generation) 18 - X BMW M2 [F87] Competition 18 - 19 X BMW M4 [F82] [ceramic brakes] 14 - X Dodge Viper Competition Coupe 03 - X X Dodge Viper SRT-10 04 - 08 X X Ferrari 512 Testarossa 92 - 96 X Ferrari F40 Street and race 87 - 92 X X Ferrari F50 95 - 97 X X Lamborghini Diablo [Brembo brakes] 92 - 99 X X Lamborghini Gallardo 04 - 13 X Lamborghini Gallardo [ceramic brakes] 04 - 13 X Lamborghini Huracán [iron brakes] 14 - X Lamborghini Huracán and Performance [ceramic brakes] 14 - X Lamborghini Murciélago [non ceramic] 01 - 10 X X McLaren F1 / shape rear on inquiry 92 - 98 X Nissan R35 GTR 08 - X Ligier JS 2R (GT car. Brembo 6 piston front caliper) 19 - X BMW M2 CS Racing [Permit B 365PS] 20 - X BMW M2 CS Racing [Permit B 365PS] 2020 X BMW M3 [F80] [ceramic brakes] 14-18 X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP1281 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP1281 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP1281 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Pagid Racing Brake Pads 1287 Fitment Guide for Pagid 1287 Brake Pad (FMSI D810) Make Model Build (Year) Front Rear Aston Martin Vanquish 03 - 08 X Audi R8 4.2 and 5.2 FSI quattro 07 - 15 X Audi R8 4.2 and 5.2 FSI quattro [ceramic brakes] 09 - 15 X Audi R8 5.2 FSI quattro (2nd generation) 15 - X Audi R8 5.2 FSI quattro (2nd generation) [ceramic brakes] 15 - X Audi R8 5.2 RWS (2nd generation) 18 - X BMW M2 [F87] Competition 18 - 19 X BMW M4 [F82] [ceramic brakes] 14 - X Dodge Viper Competition Coupe 03 - X X Dodge Viper SRT-10 04 - 08 X X Ferrari 512 Testarossa 92 - 96 X Ferrari F40 Street and race 87 - 92 X X Ferrari F50 95 - 97 X X Lamborghini Diablo [Brembo brakes] 92 - 99 X X Lamborghini Gallardo 04 - 13 X Lamborghini Gallardo [ceramic brakes] 04 - 13 X Lamborghini Huracán [iron brakes] 14 - X Lamborghini Huracán and Performance [ceramic brakes] 14 - X Lamborghini Murciélago [non ceramic] 01 - 10 X X McLaren F1 / shape rear on inquiry 92 - 98 X Nissan R35 GTR 08 - X Ligier JS 2R (GT car. Brembo 6 piston front caliper) 19 - X BMW M2 CS Racing [Permit B 365PS] 20 - X BMW M2 CS Racing [Permit B 365PS] 2020 X BMW M3 [F80] [ceramic brakes] 14-18 X CALIPERS Make Type Remarks Shape No. Brembo 07.4865. GT (F-40) [caliper family B. H, P] 18mm 1287 Brembo M4 in combination with 52mm radial disc swept depth 18mm 1287 Pagid Racing 1287 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 1287 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 1287 Brake Pad RS 14 Compound The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. Pagid Racing 1287 Brake Pad RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid Racing 1287 Brake Pad RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid Racing 1287 Brake Pad RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid Racing 1287 Brake Pad RST 2E Compound RST 2E is perfect as a front axle application in mid-endurance GT and touring car racing, in the range of 2-6h race duration. Front and rear axle application on rally race cars. RST 2 and RST 2E are semi-metallic resin bonded materials containing steel fibers. Cold friction and initial bite make these materials most appropriate for rallying and NASCAR applications. Pagid Racing 1287 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid Racing 1287 Brake Pad RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Pagid Racing Brake Pads 1287 Fitment Guide for Pagid 1287 Brake Pad (FMSI D810) Make Model Build (Year) Front Rear Aston Martin Vanquish 03 - 08 X Audi R8 4.2 and 5.2 FSI quattro 07 - 15 X Audi R8 4.2 and 5.2 FSI quattro [ceramic brakes] 09 - 15 X Audi R8 5.2 FSI quattro (2nd generation) 15 - X Audi R8 5.2 FSI quattro (2nd generation) [ceramic brakes] 15 - X Audi R8 5.2 RWS (2nd generation) 18 - X BMW M2 [F87] Competition 18 - 19 X BMW M4 [F82] [ceramic brakes] 14 - X Dodge Viper Competition Coupe 03 - X X Dodge Viper SRT-10 04 - 08 X X Ferrari 512 Testarossa 92 - 96 X Ferrari F40 Street and race 87 - 92 X X Ferrari F50 95 - 97 X X Lamborghini Diablo [Brembo brakes] 92 - 99 X X Lamborghini Gallardo 04 - 13 X Lamborghini Gallardo [ceramic brakes] 04 - 13 X Lamborghini Huracán [iron brakes] 14 - X Lamborghini Huracán and Performance [ceramic brakes] 14 - X Lamborghini Murciélago [non ceramic] 01 - 10 X X McLaren F1 / shape rear on inquiry 92 - 98 X Nissan R35 GTR 08 - X Ligier JS 2R (GT car. Brembo 6 piston front caliper) 19 - X BMW M2 CS Racing [Permit B 365PS] 20 - X BMW M2 CS Racing [Permit B 365PS] 2020 X BMW M3 [F80] [ceramic brakes] 14-18 X CALIPERS Make Type Remarks Shape No. Brembo 07.4865. GT (F-40) [caliper family B. H, P] 18mm 1287 Brembo M4 in combination with 52mm radial disc swept depth 18mm 1287 Pagid 1287 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid 1287 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid 1287 Brake Pad RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid 1287 Brake Pad RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid 1287 Brake Pad RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid 1287 Brake Pad RST 2E Compound RST 2E is perfect as a front axle application in mid-endurance GT and touring car racing, in the range of 2-6h race duration. Front and rear axle application on rally race cars. RST 2 and RST 2E are semi-metallic resin bonded materials containing steel fibers. Cold friction and initial bite make these materials most appropriate for rallying and NASCAR applications. Pagid 1287 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid 1287 Brake Pad RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Race Technologies 2337 / P1010 Brake Pads Race Technologies 2337 / P1010 Brake Pad Fitment Guide (FMSI D810) Make Model Build (Year) Front Rear Aston Martin Vanquish 03 - 08 X Audi R8 4.2 and 5.2 FSI quattro 07 - 15 X Audi R8 4.2 and 5.2 FSI quattro [ceramic brakes] 09 - 15 X Audi R8 5.2 FSI quattro (2nd generation) 15 - X Audi R8 5.2 FSI quattro (2nd generation) [ceramic brakes] 15 - X Audi R8 5.2 RWS (2nd generation) 18 - X BMW M2 [F87] Competition 18 - 19 X BMW M4 [F82] [ceramic brakes] 14 - X Dodge Viper Competition Coupe 03 - X X Dodge Viper SRT-10 04 - 08 X X Ferrari 512 Testarossa 92 - 96 X Ferrari F40 Street and race 87 - 92 X X Ferrari F50 95 - 97 X X Lamborghini Diablo [Brembo brakes] 92 - 99 X X Lamborghini Gallardo 04 - 13 X Lamborghini Gallardo [ceramic brakes] 04 - 13 X Lamborghini Huracán [iron brakes] 14 - X Lamborghini Huracán and Performance [ceramic brakes] 14 - X Lamborghini Murciélago [non ceramic] 01 - 10 X X McLaren F1 / shape rear on inquiry 92 - 98 X Nissan R35 GTR 08 - X Ligier JS 2R (GT car. Brembo 6 piston front caliper) 19 - X BMW M2 CS Racing [Permit B 365PS] 20 - X BMW M2 CS Racing [Permit B 365PS] 2020 X BMW M3 [F80] [ceramic brakes] 14-18 X CALIPERS Make Type Remarks Shape No. Brembo 07.4865. GT (F-40) [caliper family B. H, P] 18mm 1287 Brembo M4 in combination with 52mm radial disc swept depth 18mm 1287   The Race Technologies P1010 brake pad features a wide, low-profile backing plate designed for compatible high-performance brake calipers. Measuring 131.5 mm wide by 68 mm high with a 50.5 mm friction material depth, the P1010 combines a curved friction surface with a centrally divided pad face for demanding performance driving and motorsport applications. Competition Motorsport offers the Race Technologies P1010 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Choosing the correct P1010 pad shape and compound is essential for proper fitment and predictable braking performance. Race Technologies P1010 Brake Pad Specifications Pad Shape: P1010 / 2337 Overall Width: 131.5 mm Overall Height: 68 mm Friction Material Depth: 50.5 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1010 features two upper retaining openings, a gently curved upper friction edge, a center division, and a shallow curved lower edge. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers. Always compare the P1010 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1010 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1010 Brake Pads? The Race Technologies P1010 combines a 131.5 mm overall width with a 68 mm height and 50.5 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems. Distinctive Race Technologies P1010 backing plate geometry 131.5 mm overall width and 68 mm overall height 50.5 mm friction material depth Choice of RE10 racing or TS20 street/track compounds Designed for demanding performance driving and motorsport applications Race Technologies P1010 Brake Pad Fitment The Race Technologies P1010 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 131.5 mm overall width, 68 mm overall height, 50.5 mm friction material depth, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1010 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1010 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.

Race Technologies 2337 / P1010 Brake Pads Race Technologies 2337 / P1010 Brake Pad Fitment Guide (FMSI D810) Make Model Build (Year) Front Rear Aston Martin Vanquish 03 - 08 X Audi R8 4.2 and 5.2 FSI quattro 07 - 15 X Audi R8 4.2 and 5.2 FSI quattro [ceramic brakes] 09 - 15 X Audi R8 5.2 FSI quattro (2nd generation) 15 - X Audi R8 5.2 FSI quattro (2nd generation) [ceramic brakes] 15 - X Audi R8 5.2 RWS (2nd generation) 18 - X BMW M2 [F87] Competition 18 - 19 X BMW M4 [F82] [ceramic brakes] 14 - X Dodge Viper Competition Coupe 03 - X X Dodge Viper SRT-10 04 - 08 X X Ferrari 512 Testarossa 92 - 96 X Ferrari F40 Street and race 87 - 92 X X Ferrari F50 95 - 97 X X Lamborghini Diablo [Brembo brakes] 92 - 99 X X Lamborghini Gallardo 04 - 13 X Lamborghini Gallardo [ceramic brakes] 04 - 13 X Lamborghini Huracán [iron brakes] 14 - X Lamborghini Huracán and Performance [ceramic brakes] 14 - X Lamborghini Murciélago [non ceramic] 01 - 10 X X McLaren F1 / shape rear on inquiry 92 - 98 X Nissan R35 GTR 08 - X Ligier JS 2R (GT car. Brembo 6 piston front caliper) 19 - X BMW M2 CS Racing [Permit B 365PS] 20 - X BMW M2 CS Racing [Permit B 365PS] 2020 X BMW M3 [F80] [ceramic brakes] 14-18 X CALIPERS Make Type Remarks Shape No. Brembo 07.4865. GT (F-40) [caliper family B. H, P] 18mm 1287 Brembo M4 in combination with 52mm radial disc swept depth 18mm 1287   The Race Technologies P1010 brake pad features a wide, low-profile backing plate designed for compatible high-performance brake calipers. Measuring 131.5 mm wide by 68 mm high with a 50.5 mm friction material depth, the P1010 combines a curved friction surface with a centrally divided pad face for demanding performance driving and motorsport applications. Competition Motorsport offers the Race Technologies P1010 brake pad in RE10 racing and TS20 street/track compounds, allowing drivers to select the friction characteristics best suited to their vehicle, braking system, tire grip, and intended use. Choosing the correct P1010 pad shape and compound is essential for proper fitment and predictable braking performance. Race Technologies P1010 Brake Pad Specifications Pad Shape: P1010 / 2337 Overall Width: 131.5 mm Overall Height: 68 mm Friction Material Depth: 50.5 mm Available Compounds: RE10 and TS20 Intended Use: HPDE, track days, club racing, and motorsport, depending on compound The P1010 features two upper retaining openings, a gently curved upper friction edge, a center division, and a shallow curved lower edge. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible calipers. Always compare the P1010 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering. RE10 Racing Brake Compound Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to maintain consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear. RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions. As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation. TS20 Street and Track Brake Compound Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions. TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important. RE10 vs. TS20: Which Compound Should You Choose? Choosing the correct Race Technologies P1010 brake compound depends on how the vehicle is used and the demands placed on its braking system. RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability. TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important. Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application. Why Choose Race Technologies P1010 Brake Pads? The Race Technologies P1010 combines a 131.5 mm overall width with a 68 mm height and 50.5 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems. Distinctive Race Technologies P1010 backing plate geometry 131.5 mm overall width and 68 mm overall height 50.5 mm friction material depth Choice of RE10 racing or TS20 street/track compounds Designed for demanding performance driving and motorsport applications Race Technologies P1010 Brake Pad Fitment The Race Technologies P1010 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness. Before ordering, verify the 131.5 mm overall width, 68 mm overall height, 50.5 mm friction material depth, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications. Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed. Buy Race Technologies P1010 Brake Pads at Competition Motorsport Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops. Select your preferred Race Technologies P1010 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.