360

Girodisc Ferrari 360 & F430 Front or Rear Rotors Reduce unsprung weight and improve braking performance on your Ferrari 360 or F430 with Girodisc lightweight two-piece rotors. Designed as a direct replacement for OEM iron rotors, these assemblies can be installed on either the front or rear axle and deliver exceptional cooling, reduced fade, and superior durability for high-performance driving. Vehicle Fitment Compatible with:• Ferrari 360 Modena (1999–2005)• Ferrari 360 Spider (2000–2005)• Ferrari F430 Coupe (2005–2009)• Ferrari F430 Spider (2005–2009)Note: Fits vehicles without factory carbon-ceramic brakes (CCM).Front or rear fitment – sold/priced per pair. Engineered for Performance and Precision Each Girodisc 2-piece assembly is a fully floating design that replaces the factory one-piece rotor to reduce unsprung and rotating mass. The 6061-T6 aluminum hats are CNC-machined and hard anodized for strength and corrosion resistance. The friction rings are machined from Girodisc’s proprietary high-carbon iron castings—developed for high thermal stability and superior resistance to cracking. The 48 curved internal vanes act as centrifugal pumps to pull cooling air through the rotor, keeping temperatures stable under aggressive braking. Specifications • Rotor Diameter: 330mm• Thickness: 28mm (replace at 26mm)• Weight: 15.8 lbs per rotor• Fitment: Front or Rear axle• Material: High-carbon cast iron friction rings / 6061-T6 aluminum hats• Fully floating assembly with spring clips and Belleville washers• Made and assembled in the USA• Sold/priced per pair Features • Direct OEM replacement for Ferrari 360 and F430 models without CCM brakes• Two-piece floating rotor design reduces unsprung and rotational mass• 6061-T6 aluminum hats anodized for corrosion resistance• Proprietary high-carbon iron friction rings for durability and consistent performance• Curved vane design pulls air through the rotor for optimal cooling• Fully rebuildable – reuse the aluminum hats with replacement rings (P/N D1-001)• Race-ready floating hardware provides controlled expansion without noise• Assembled in Bellingham, WA from U.S.-sourced materials Girodisc A1-001 Front or Rear Rotor FAQs: Do these rotors fit both the front and rear axles? Yes. The A1-001 Girodisc rotors are designed for interchangeable use on either the front or rear of Ferrari 360 and F430 models without carbon-ceramic brakes. Are these rotors lighter than stock? Absolutely. Each assembly weighs only 15.8 lbs, helping reduce unsprung and rotating mass for faster suspension response and improved handling. Can the rotor rings be replaced? Yes. The aluminum hats are reusable, and replacement iron rings (P/N D1-001) are available when needed, reducing long-term maintenance cost. Are these suitable for track use? Definitely. The curved vane cooling and floating design provide excellent thermal control and consistent braking even under extreme heat cycles. Upgrade your Ferrari 360 or F430 with Girodisc two-piece rotors for unmatched stopping precision, reduced weight, and rebuildable performance worthy of Maranello’s finest.

D1-001 Girodisc Ferrari 360, F430 Front or Rear Replacement Rings Maintain your Ferrari’s legendary braking performance with Girodisc D1-001 replacement rings, designed for both front and rear Girodisc two-piece rotor systems. These precision-machined rings are made from Girodisc’s proprietary high-carbon cast iron, providing outstanding heat capacity, fade resistance, and durability under aggressive braking. The included floating hardware kit allows quick, straightforward installation using your existing Girodisc aluminum hats. Vehicle Fitment Compatible with:• Ferrari 360 Modena / Spider (1999–2005)• Ferrari 360 Challenge Stradale (2003–2004)• Ferrari F430 / F430 Spider (2005–2009)Note: Designed exclusively for Girodisc 2-piece front or rear rotors. Not compatible with OEM or carbon-ceramic systems. Features • Direct replacements for Girodisc two-piece front or rear rotors• Sold as a matched left/right pair with complete floating hardware kit• High-carbon alloy offers superior heat control and crack resistance• Directional curved vanes maximize airflow and cooling• Maintains factory brake bias and ABS function• Machined and precision-balanced in the USA• Sold/priced per pair Specifications • Diameter: 330 mm (application dependent)• Position: Front or Rear• Material: High-carbon cast iron• Mount Type: Floating two-piece system• Includes: Two rotor rings and hardware kit• Sold/priced per pair Girodisc D1-001 Ferrari 360 / F430 Front or Rear Replacement Ring FAQs Can these fit OEM Ferrari hats? No. These are designed only for Girodisc aluminum hats used in the Girodisc two-piece system. Are these rotors suitable for both front and rear positions? Yes. The D1-001 rings can be used in either position when paired with the correct Girodisc hat assemblies. How do they compare to OEM Ferrari rotors? Girodisc rotors offer better heat management, reduced unsprung weight, and lower replacement costs compared to factory cast or CCM rotors. Which pads should I use with these? For road use, Ferodo DS2500 or Hawk HPS 5.0 pads are excellent. For track or spirited driving, Pagid RS29 or Carbotech XP10 pads deliver top performance. Preserve the braking precision of your Ferrari 360 or F430 with Girodisc D1-001 replacement rings — engineered for consistent heat control, lightweight performance, and track-proven reliability.

Pagid Racing Brake Pad Shape 4906 Pagid 4906 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 15 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 09 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 15 - X Dodge Viper ACR [ceramic brakes] 14 - 17 X Ferrari 360 Challenge Stradale [ceramic brakes] 03 - 05 X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 07 - 10 X Ferrari 458 Italia [ceramic brakes] 10 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 16 - X Ferrari 599 GTB Fiorano 06 - 12 X Ferrari Enzo [ceramic brakes] 02 - 04 X Ferrari F430 [ceramic brakes] 05 - 10 X Ferrari Several ceramic brakes CCM X Lamborghini Aventador LP700-4 [ceramic brakes] 11 - X Lamborghini Several ceramic brakes X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. These Pagid Racing Brake compounds are for ceramic rotors only. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

Cobalt D1001 Racing Brake Pads Cobalt D1001 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Dodge Viper 01 - 02 X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X KTM X-Bow 08 - X Lancia Delta 2.0 HF Int.16V Evo 91 - 94 X Lotus Esprit Turbo 94 - 96 X X Maserati Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm] 13 - X Maserati Grand Turismo 07 - X Peugeot 406 Coupe Brembo brake 97 - 04 X Renault Clio II 3.0 V6 mid engine 00 - 05 X X Seat Leon 1.8T Cupra R (Brembo) 03 - 06 X Seat Leon 2.8 Cupra 4 (Brembo) 01 - 06 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X   Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Pagid Racing Brake Pads 1408 Pagid Racing 1408 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 1408 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 1408 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 1408 Brake Pad RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid Racing 1408 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pads 1408 Pagid Racing 1408 Brake Pads Fitment Guide Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 1408 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 1408 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 1408 Brake Pad RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid Racing 1408 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Girodisc GP-Series Pads No. 592 (Front) The Girodisc GP-Series No. 592 front pad family delivers precise fitment and confident braking for Brembo-equipped performance applications using the D592 pad shape. Available in GP10 street, GP35 all-around race, and GP40 sprint race compounds, these pads let you tailor bite, heat capacity, and rotor friendliness to your driving style. Whether you daily-drive the car, run frequent HPDE events, or push in sprint races, there is a 592-series compound that fits your needs. Fits the Following Vehicles Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Dodge Viper 01 - 02 X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X KTM X-Bow 08 - X Lancia Delta 2.0 HF Int.16V Evo 91 - 94 X Lotus Esprit Turbo 94 - 96 X X Maserati Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm] 13 - X Maserati Grand Turismo 07 - X Peugeot 406 Coupe Brembo brake 97 - 04 X Renault Clio II 3.0 V6 mid engine 00 - 05 X X Seat Leon 1.8T Cupra R (Brembo) 03 - 06 X Seat Leon 2.8 Cupra 4 (Brembo) 01 - 06 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Features • Multiple compounds available to match street, HPDE, and sprint racing use• Direct-fit 592 pad shape for popular Brembo performance calipers• Consistent pedal feel and modulation across a wide temperature range• Dedicated iron-rotor formulation for reliable performance on track• Available as a complete axle set for the front brakes Compound Overview GP10 Street Pads for 592 Shape – GP10-0592.15Designed for performance-minded street drivers, GP10 semi-metallic pads balance daily drivability with the ability to handle occasional track sessions. They offer reduced noise and dust compared to full race pads while still delivering responsive pedal feel and solid stopping power when you pick up the pace. For drivers planning frequent or extended track use, Girodisc recommends stepping up to a dedicated race compound for better high-heat durability. GP35 Race Pads for 592 Shape – GP35-0592.15GP35 is the all-around race compound that blends the bite of sprint pads with the durability of endurance pads. It beds quickly and is designed to work with both street car ABS and motorsport-grade ABS. A smooth, linear torque curve gives excellent modulation and release under trail braking, making GP35 a favorite for advanced HPDE drivers and cars competing in a wide range of professional and club racing series. GP40 Sprint Race Pads for 592 Shape – GP40-0592.15GP40 is a sprint-focused compound that offers strong race-ready bite without punishing your rotors. Sitting between a pure sprint and endurance formulation, it maintains good pedal feel and heat capacity while remaining relatively rotor friendly. These pads have been proven in demanding sprint and long-distance events and are ideal for drivers who want aggressive braking performance with controlled wear. Specifications • Pad Shape: 592 (D592 pattern)• Position: Front• Available Compounds: GP10 performance street, GP35 all-around race, GP40 sprint race• Thickness: 15 mm (592.15 specification)• Rotor Type: Iron rotors only• Sold as: One front axle set Girodisc GP-Series 592 Pad FAQs Which compound should I choose for a mostly street-driven car with occasional track days? GP10 is the best fit for primarily street use with light track work. It offers quieter operation and lower dust than the race pads while still giving you confident braking when you drive harder. When is GP35 the right choice? Choose GP35 if you run frequent HPDE events or club racing and want a single race pad that can handle a wide range of tracks and tires. It offers strong bite, good life, and excellent modulation, making it a versatile “do-it-all” race option. Who should run GP40? GP40 is aimed at more serious sprint-race and aggressive track drivers who want a higher-friction feel and strong initial bite while still keeping rotor wear under control. It’s a great option if you’re chasing lap times and running shorter, intense sessions. Are these pads compatible with carbon-ceramic rotors? No. All GP10, GP35, and GP40 592 pads are designed specifically for iron brake rotors and should not be used with carbon-ceramic (CCB) systems. Do these pads work with factory ABS and stability control? Yes. The GP-series compounds are formulated to work properly with modern ABS and stability-control systems when matched to appropriate tires and properly bedded in. Upgrade your Brembo-equipped performance car with Girodisc GP-Series 592 pads and choose the compound that matches how you drive—whether that’s daily commuting, flat-out sprint racing, or something in between.

Ferodo FCP1348 Brake Pads (Front) Fitment Guide Ferodo FCP1348 Brake Pad (FMSI D592) Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Dodge Viper 01 - 02 X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X KTM X-Bow 08 - X Lancia Delta 2.0 HF Int.16V Evo 91 - 94 X Lotus Esprit Turbo 94 - 96 X X Maserati Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm] 13 - X Maserati Grand Turismo 07 - X Peugeot 406 Coupe Brembo brake 97 - 04 X Renault Clio II 3.0 V6 mid engine 00 - 05 X X Seat Leon 1.8T Cupra R (Brembo) 03 - 06 X Seat Leon 2.8 Cupra 4 (Brembo) 01 - 06 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP1348 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP1348 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP1348 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Ferodo FCP1348 Brake Pads (Rear) Fitment Guide Ferodo FCP1348 Brake Pad (FMSI D592) Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Dodge Viper 01 - 02 X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X KTM X-Bow 08 - X Lancia Delta 2.0 HF Int.16V Evo 91 - 94 X Lotus Esprit Turbo 94 - 96 X X Maserati Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm] 13 - X Maserati Grand Turismo 07 - X Peugeot 406 Coupe Brembo brake 97 - 04 X Renault Clio II 3.0 V6 mid engine 00 - 05 X X Seat Leon 1.8T Cupra R (Brembo) 03 - 06 X Seat Leon 2.8 Cupra 4 (Brembo) 01 - 06 X Volvo S60 Turbo R Brembo brakes 03 - 07 X Volvo V70 R 2.5T Brembo brakes 03 - 07 X Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. The Ferodo DS3.12 is a top-tier endurance racing brake pad compound built for maximum fade resistance, high friction, and extremely consistent performance at elevated temperatures. If you need a Ferodo track brake pad for aggressive braking, long sessions, and serious motorsport use, DS3.12 is one of the strongest options in the lineup. The DS3.12 compound provides strong initial bite, a highly stable torque curve, and dependable braking performance in demanding track conditions. It is ideal for experienced drivers, endurance racing, and high-grip applications where repeatable stopping power matters most. Maximum fade resistance in the Ferodo range High friction and strong initial bite Very consistent braking response at track temperatures Excellent durability in endurance racing use Best for: advanced track-day drivers and racers who want a high-performance race brake pad with elite heat capacity and confidence-inspiring consistency. Note: DS3.12 is a full race compound and may produce increased dust, disc wear, and reduced cold performance compared with street-oriented pads. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. The Ferodo DS1.11 is a proven endurance racing brake pad compound designed for drivers who need outstanding fade resistance, long pad life, and precise control under repeated high-temperature braking. For track cars and serious HPDE builds, DS1.11 is a trusted Ferodo race brake pad with a strong reputation for consistency. This DS1.11 features stable braking performance, excellent modulation, and durability in demanding track conditions. Compared with more street-focused compounds, DS1.11 is better suited to aggressive lapping, endurance sessions, and drivers who value a progressive pedal feel. Exceptional fade resistance for track use Long wear characteristics in endurance-style driving Progressive, controllable pedal feel Excellent choice for HPDE and racing applications Best for: drivers looking for a track brake pad with durability, modulation, and high-temperature stability for repeated hard use. Note: DS1.11 is a race compound and is not ideal for customers seeking low noise, low dust, or refined street manners. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. The Ferodo DS2500 is one of the most popular performance brake pad compounds for drivers who want strong braking on the street and dependable performance at the track. If you are looking for a street and track brake pad with excellent cold bite, low noise, and impressive fade resistance, the DS2500 is a proven choice. The DS2500 delivers confident pedal feel, consistent stopping power, and better high-temperature performance than typical street pads. It is an excellent option for spirited driving, autocross, HPDE, and dual-purpose performance cars. Strong cold bite for street use Low noise when properly bedded Excellent fade resistance for a dual-purpose pad Great match for performance street tires Best for: drivers who want a versatile Ferodo brake pad for daily driving, canyon runs, and light to moderate track use without giving up refinement. Note: DS2500 is a race-derived compound and may produce more dust than an ordinary OEM street pad. Ferodo DS3000 Brake Compound Details The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP1348 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP1348 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP1348 Operating Temperature Comparison Chart **Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors.**

Castrol React SRF Racing Brake Fluid Ultra-High Wet Boiling Point Makes Castrol SRF A Standout Castrol React SRF Racing Brake Fluid is an ultra-high performance brake fluid popular with many of the highest performing auto racing teams around the world. The key to Castrol SRF brake fluid's performance is its silicon-ester technology. Not only is it less hygroscopic (i.e., it absorbs less water) than typical glycol-based brake fluids, Castrol SRF also reacts chemically with any absorbed water to further reduce its adverse effects on high-temperature braking performance. The result is an almost unheard of 518° F (270° C) wet boiling point, more than 100° F higher than most other racing brake fluids! Exceeds SAE 1703, ISO 4925, JIS K2233, FMVSS No. 116 DOT3 and DOT 4 specifications. Note: Castrol SRF is not a silicone-based brake fluid (i.e., DOT 5) and is compatible with most factory brake systems and fluids, including DOT 3 and DOT 4 fluids. Always follow vehicle manufacturer's recommendations when adding brake fluid. Castrol React SRF Racing Brake Fluid Typical Properties: Dry Boiling Point: 590°F (310°C) Wet Boiling Point: 518°F (270°C) Superior anti-vapor lock properties One-liter (1000ml) bottle

HALO P1 High Performance Brake Fluid The World's Most Advanced Racing Brake Fluid Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide. Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times.Sold in 590 ml (20 fl. oz.) bottles. Features & Benefits That'll Make You Weep Tears of Joy Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners. Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot). World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard. Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills. What Makes Halo P1 The Secret Weapon? While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures. FAQs That'll Clear the Air Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have: Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended. How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb. The Call to Action You've Been Waiting For So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.