Roll Bar Accessories

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette C8 Stingray & Z51 (2020-2024) Chevrolet Corvette C8 Z06 (2023-2024) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C8 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

Allstar Performance SFI 45.1 Roll Bar Padding Allstar Performance SFI 45.1 mini roll bar padding is ideal for tight areas in a race car when standard padding is too large. It features a unique, compact design to provide driver protection to specific areas and meets SFI 45.1 specifications. Allstar Performance Roll Bar Padding is easy to install, with a special peel-and-stick backing giving you a secure fit on roll bars ranging from  1.25 inches to 1.75 inches in diameter. Allstar Performance Roll Bar Padding Details: Manufacturer: Allstar Performance Thickness: 0.75 inches Length: sold in individual 36-inch lengths Maximum Bar Diameter: 1.75 inches Minimum Bar Diameter: 1.25 inches Certification: SFI 45.1 Attachment: attaches to roll bar with adhesive backing

CMS Performance Locking Harness Collars Designed for CMS Performance Roll Bars to Keep Harnesses In Place These locking roll bar collars from CMS Performance are designed and perfectly sized to fit roll bars with either 1.75" or 1.50" O.D. cross-bars. Precision CNC machined CMS Performance Roll Bar Harness Collars help keep your harness shoulder straps in exactly the right place on your roll bar. These easy-to-install double-split aluminum collars come with high-strength Allen bolt hardware. Anodized a deep rich satin black, the look as good as they perform. Strong and lightweight, the CMS Performance Harness Collars are a great safety addition to your CMS Performance roll bar. CMS Performance Roll Bar Harness Collar Details Manufacturer: CMS Performance Manufacturer Part Numbers: RB-COLLAR-AL175-BLK or RB-COLLAR-AL150-BLK Features: clamps tight to help keep your shoulder straps firmly located in the proper position Material: aluminum Inside diameter (when tightened): 1.50" or 1.75" Finish: satin black anodizing Roll bar collars are priced individually.

CMS Performance Sub Strap + Lap Belt Mount for GR Supra Fits the Following Vehicles: Toyota GR Supra, A90/91 (2020+) Toyota GR86 (2022+) Subaru BRZ, ZN8 (2022+) The Best Way to Mount Harness Lap and Sub Belts in Your Toyota/Subaru The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Harness Install Kit For GR Corolla This Product Fits The Following Cars: Toyota GR Corolla (2023+) Quick and Easy Installation of Harness Lap Belts in the GR Corolla The CMS Performance Harness Install Kit for the GR Corolla provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your GR Corolla. The kit is typically used along with the bolt-in CMS Performance Roll Bar for the GR Corolla. Together they give GR Corolla driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance GR Corolla Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance GR Corolla Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the GR Corolla, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the GR Corolla that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Sub Strap + Lap Belt Mount for BMW E46 This mount fits BMW E46 cars (1999-2006), driver or passenger side The Best Way to Mount Harness Lap and Sub Belts in Your BMW  The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount for BMW Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-E46 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

Shrader Performance Rear Seat Delete For Mustang S197 Weighing about 30 pounds less than the factory rear seats, the Shrader Rear Seat Delete kit removes as much weight as possible while retaining a strong, solid support. Tested on the S197 and confirmed fitment. The back panel easily folds down for access to the trunk (a first in Mustang RSD designs) by popping out two plastic clips.  The fully-carpeted rigid molded plastic panels are strong enough for luggage, tires, race tools, and more.  With sound insulation padding built into each panel, no detail was spared.  Even the trunk area has a finished look! Detailed instructions are included, using factory bolt holes for mounting.  Black carpet only.  Does not fit convertibles. This Rear Seat Delete Fits The Following Cars All 2005-2014 Mustang Fastback (hardtop) including V6. Does not fit convertibles. Straightforward Installation Basic metric sockets, T40 and T50 Torx bits. Some cutting is involved when fitting around the CMS Performance Roll Bar. Click here for basic installation instructions