Girodisc
A1-153 Girodisc 2pc Front Brake Rotors
$1,300.00
A1-153 Girodisc Two-Piece 350mm Front Brake Rotors
FITMENT: Porsche Boxster S and Cayman S (981), Front
This Girodisc system is an upgrade from Porsche's 330mm one-piece OEM front rotors to 350mm two-piece floating steel rotors with aluminum hats, a direct replacement for the OEM brake disc. The two-piece floating disc will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Girodisc
A2-035 Girodisc 2pc REAR Brake Rotors (325mm)
$1,200.00
PORSCHE 981 CAYMAN/BOXSTER BASE AND S (2013+)
The Girodisc system is an upgrade to a 325mm two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The two-piece floating disc will bolt directly to the car and work with OEM calipers perfectly.  By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.  The Girodisc rotors are lighter than OEM pieces.  The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Girodisc Magic Pads on the street, Pagid or PFC racing pads on track, and Competition Motorsport RF1 brake fluid (all available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. Â The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. Â The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. Â
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. Â The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs.
Sold/Priced per pair
Girodisc
A2-049 Girodisc 2pc REAR Brake Rotors (OEM PCCB)
$1,300.00
FITS:
PORSCHE 987Â Boxster S / Spyder / Cayman S / Cayman R WITH OEM PCCB
PORSCHE 981 Cayman S / Boxster S WITH OEM PCCB
The Girodisc system is an upgrade to a 350mm 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.
When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheated or cracking PCCB rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. Â
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. Â The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs.
Sold/Priced per pair.
Girodisc
A1-032 Girodisc 2pc Front Brake Rotors (OEM PCCB)
$1,300.00
A1-032 Girodisc 2pc Front Brake Rotors (OEM Porsche PCCB)
FITS THE FOLLOWING CARS:
Porsche 981 Boxster/Cayman (w/ OEM PCCB)
Porsche 991 Carrera (w/ OEM PCCB)
Competition Motorsport is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.
This Girodisc system upgrades your Porsche 981 or 991 equipped with factory PCCB brakes to a 350mm two-piece steel disc and aluminum hat. This two-piece floating rotor design will bolt directly to your Porsche front and work flawlessly with the OEM calipers.
Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Girodisc rotors maintain the low rotational and unsprung mass of your PCCB rotors while being far more durable -- particularly when swapping wheels on and off at the race track.
Combined with Pagid or PFC performance brake pads and Competition Motorsport RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.
The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.
The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.
This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.
Sold/priced per pair.
Pagid
Pagid Racing Brake Pads No. 8074
$542.45
RSL 29:
The PAGID RS29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport.  The racing compound combines the outstanding wear rate of the RS19 with a slightly higher coefficient of friction and initial bite. Based on the RS14, A slight reduction of the friction value improves the modulation (controllability). Nevertheless, the friction value is enough for cars without power-assisted brake system and ensures comfortable low effort on the brake pedal. Constant temperatures up to 600°C (1,100°F) are possible. This combination of friction value, fading stability and low wear rates on pads and discs (rotors) is unmatched. Due to its excellent release characteristics and controllability PAGID endurance materials are also often used for sprint races.
Pagid RS29 with a very similar friction coefficient to RS19 with improvements in initial bite offering quicker response and slightly more temperature stable at the upper levels of the temperature range. Developments in raw material selection and compounding have resulted in improvements also in pedal feel and feedback, helping with modulation particularly on lighter applications.
This material provides very good levels of performance and response at all temperature levels, only slight temperature inputs are required to bring the pad up to its optimum performance level. Another favourite with endurance racers having won many classes at all major endurance events, such as Le-Mans, Daytona, Spa, Nurburgring, etc. Due to the exceptional pad life and very low wear on brake discs it has been possible to run 24 hours without a change of pads or discs. Able to withstand slightly higher disc temperatures than RS19, this has proved more suitable for applications running very high disc temperatures.
Although designed primarily for endurance racing, because of the consistent levels of performance and user friendliness many competitors use this material successfully for sprint and short distance races also. RS29 has also found favour in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Â
Pagid
Pagid Racing Brake Pads No. 2406
from $288.75
Fits These Vehicles:
Make
Model
Build (Year)
Front
Rear
Porsche
718 Boxster 2.0 [982]
16 -
Â
X
Porsche
718 Boxster S 2.5 [982]
16 -
Â
X
Porsche
718 Cayman 2.0 [982]
16 -
Â
X
Porsche
718 Cayman S 2.5 [982]
16 -
Â
X
Porsche
996 3.4 C & 3.6
97 - 05
Â
X
Porsche
997 3.6 C & 3.6 C4
05 - 09
Â
X
Porsche
Boxster 2.7 [981]
12 -
Â
X
Porsche
Boxster [986]
96 - 05
Â
X
Porsche
Boxster [987]
05 -
Â
X
Porsche
Boxster GTS 3.4 [981]
14 -
Â
X
Porsche
Boxster S 3.4 [981]
12 -
Â
X
Porsche
Boxster S [986]
99 - 05
Â
X
Porsche
Boxster S [987]
05 - 12
Â
X
Porsche
Cayenne Turbo [18" wheels]
02 - 10
Â
X
Porsche
Cayman 2.7 [981]
13 -
Â
X
Porsche
Cayman [987]
09 - 12
Â
X
Porsche
Cayman [987]
06 - 09
Â
X
Porsche
Cayman GTS 3.4 [981]
14 -
Â
X
Porsche
Cayman R [987] (none ceramic)
10 -
Â
X
Porsche
Cayman S 3.4 [981]
13 -
Â
X
Porsche
Cayman S [987]
06 - 12
Â
X
RSL 29:
The PAGID RS29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
RS 14:
The PAGID RS14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying.
Performance Friction
PFC Brake Pads 1389.08.17.44 FRONT
$449.95
PFC 08 COMPOUND
One of PFC's most popular compounds which came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, excellent release and modulation characteristics.
Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' endurance materials, but with much higher bite and consistent performance across a broad temperature range.
¬â€
¬â€
¬â€
¬â€
Performance Friction
PFC Brake Pads 0738.XX.16.44 REAR
$373.95
PFC 11 COMPOUND
A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation.
PFC 08 COMPOUND
One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range.
FITMENT (Iron Rotors Only)
Most Porsche 986, 987, 996, & 997 Rear Calipers
Competition Motorsport
CMS Performance RF1 DOT4 622ºF Racing Brake Fluid
from $21.95
CMS Performance RF1 DOT4 Racing Brake Fluid
Real-Life High Boiling Point Without The Real High Price
RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.)
On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot.
So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days.
The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid.
RF1 Racing Brake Fluid Details:
Typical dry boiling point: 328º C (622º F)
Typical wet boiling point: 204º C (399º F)
Exceeds DOT3 & DOT4 standards
Bottle size: 500 ml (16.9 fl oz)
Click Here for Product MSDS Sheet
A Word About Flushing Brake Fluid
All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point.
To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!
Girodisc
Girodisc Brake Pad Spreader GDPS01
$250.00
Girodisc Brake Pad Spreader
This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The Girodisc Brake Pad Spreader is designed to easily spread brake pads and pistons to facilitate quick replacement of pads and/or rotors in a shop or racing environment.
No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons fully and evenly into their bores with one squeeze of the levers.
The Girodisc Brake Pad Spreader was designed to be used with popular racing brake calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help it fit into any caliper, the amount of throw is adjustable.
Insert the spreading plates one way for wider six-piston calipers, then turn the spreader 90o and use the plate sides for four-piston calipers.
The Girodisc Brake Pad Spreader is made from heavy-gauge steel, powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action.
The Girodisc Brake Pad Spreader will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors frequently.
Race Technologies
Race Technologies RE10 Brake Pad - 2421.15.5.RE10
$549.00
RT RE10*:RE10 is the ultimate endurance race compound offering a balance of excellent stopping power, low thermal conductivity, extremely low pad and disc wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments.
Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms
*Denotes a "race only" pad.
Running a "racing use only" pad on the street could produce excessive noise and dust.
Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range.
Racing pads are designed to work in specific temperature ranges so it is important to choose the desired compound for the correct environment the vehicle will be used in.
Pad Compounds are run on a brake dynamometer over multiple brake applications (stops) to test the materials in a controlled environment for the most accurate data. Wear rates and temperatures can be influenced by car setup, grip levels, track layout/configuration and many other variables.
Race Technologies
Race Technologies RE10 Brake Pad - 2403.17.RE10
$649.00
RT RE10*:RE10 is the ultimate endurance race compound offering a balance of excellent stopping power, low thermal conductivity, extremely low pad and disc wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments.
Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms
*Denotes a "race only" pad.
Running a "racing use only" pad on the street could produce excessive noise and dust.
Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range.
Racing pads are designed to work in specific temperature ranges so it is important to choose the desired compound for the correct environment the vehicle will be used in.
Pad Compounds are run on a brake dynamometer over multiple brake applications (stops) to test the materials in a controlled environment for the most accurate data. Wear rates and temperatures can be influenced by car setup, grip levels, track layout/configuration and many other variables.
Race Technologies
Race Technologies RE10 Brake Pad - 2283.15.5.RE10
$549.00
RT RE10*:RE10 is the ultimate endurance race compound offering a balance of excellent stopping power, low thermal conductivity, extremely low pad and disc wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments.
Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms
*Denotes a "race only" pad.
Running a "racing use only" pad on the street could produce excessive noise and dust.
Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range.
Racing pads are designed to work in specific temperature ranges so it is important to choose the desired compound for the correct environment the vehicle will be used in.
Pad Compounds are run on a brake dynamometer over multiple brake applications (stops) to test the materials in a controlled environment for the most accurate data. Wear rates and temperatures can be influenced by car setup, grip levels, track layout/configuration and many other variables.
Girodisc
D1-153 Girodisc FRONT Replacement Rotor Rings
$800.00
REPLACEMENT ROTOR RINGS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Need new rings for your Girodisc two-piece rotors? We've got them. Rings come complete with brand new hardware and full instructions for re-assembly.Price is for one pair of rotor rings and two hardware kits.
Girodisc
D2-035 Girodisc REAR Replacement Rotor Rings
$800.00
REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Need new rings for your Girodisc 2pc rotors? We've got them. Rings come complete with all new hardware and full instructions for re-assembly.Price is for a pair of rings and two hardware kits.