Bell Racing Helmets
Bell BR8 Sport Helmet SA2025
$759.95
Bell BR8 Sport Helmet SA2025
The Bell BR8 Sport Helmet SA2025 is built for racers who demand adaptability, airflow control, and protection in off-road and dirt racing environments. Designed to handle harsh conditions where dust, heat, and debris are constant challenges, the BR8 combines advanced ventilation engineering with Bell’s proven safety standards to keep drivers comfortable and focused during long sessions and intense competition.
Adaptable ventilation for dirt and off-road racing
The BR8 Sport Helmet is engineered around a modular forced-air system that allows racers to configure airflow based on vehicle setup, seating position, and race conditions. Using an included air kit system, the helmet can be run in standard configuration or converted to left or right side forced air, left or right three-quarter top forced air, or full top forced air. This flexibility allows one helmet to adapt across multiple vehicles and racing disciplines.
Bell BR8 Sport Helmet Key features
SA2025 Snell certification for competitive motorsports use
Designed specifically for off-road and dirt racing applications
Modular forced-air kit system included for multiple airflow configurations
Aerodynamic front duckbill to stabilize airflow at speed
Rear-facing Venturi exhaust vents to prevent dust intrusion
Double Screen Anti-Fog (DSAF) visor insert for consistent clarity
Internal air chamber system that evenly distributes airflow around the head
Compatible with or without ear cups for communication or noise control setups
Lightweight composite shell designed for durability and comfort
Ventilation engineered to keep dust out
Unlike traditional forced-air helmets that allow debris to enter through exhaust ports, the BR8 uses rear-facing Venturi vents that pull air out while reducing dust ingress. Combined with the internal air chamber system, airflow is evenly distributed regardless of which forced-air configuration is used, preventing hot spots and pressure points inside the helmet.
Bell BR8 Sport Helmet SA2025 FAQs
Is the Bell BR8 Sport Helmet SA2025 approved for racing competition?Yes. The BR8 meets Snell SA2025 certification requirements, making it legal for most sanctioned motorsports events that require current SA-rated helmets.
What types of racing is the Bell BR8 designed for?The BR8 is designed primarily for off-road, dirt, and short-course racing where dust control and forced-air capability are critical.
Can the Bell BR8 be used without a forced-air system?Yes. The helmet can be run in standard configuration without forced air or converted using the included kit depending on your needs.
Does the Bell BR8 prevent visor fogging?Yes. The BR8 includes a Double Screen Anti-Fog (DSAF) insert that creates a positive seal and significantly reduces shield fogging in varying conditions.
Can ear cups be removed from the Bell BR8 Sport Helmet?Yes. The helmet can be used with or without ear cups, allowing racers to customize comfort and communication setups.
When you need one helmet that adapts to multiple vehicles, race formats, and airflow requirements, the Bell BR8 Sport Helmet SA2025 delivers flexibility, protection, and comfort built specifically for demanding off-road competition.
Bell BR8 SA2025 Helmet Sizing Chart
Add a Competition Motorsport Performance Racing Helmet Bag to your order and keep your new Bell Racing BR8 helmet safe and secure throughout each race weekend.
Upgrade your gear with the Bell BR8 Helmet SA2025 and experience uncompromising safety and comfort every time you hit the track.
Arai Helmet Limited
Arai GP-7 Helmet SA2020
$749.66
$1,079.95
Arai GP-7 SA2020 Helmet
A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The Arai GP-7 is constructed with Arai’s own PBcLc (Peripherally Belted Complex Laminate) shell construction and the same shell shape as the Formula One-grade GP-7SRC model. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system.
The Arai GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet.
THE ARAI GP-7 AUTO RACING HELMET POSITIVE SHIELD LATCH
Simple yet effective, the positive latch mechanism on the Arai GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use.
NEW SHIELD PIVOT HARDWARE FOR THE ARAI GP-7 HELMET
The Arai GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the Arai GP-7 SA2020 helmet.
Additional Arai GP-7 shields in various tints and colors available here.
ARAI GP-7 AUTO RACING HELMET VENTILATION
Increased airflow is key to the GP-7 SA2020 helmet’s design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow.
M6 ANCHORS FOR THE ARAI GP-7 HELMET
Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.
NEW CHINBAR FOR THE ARAI GP-7
The Arai GP-7 SA2020’s new, ergonomic chinbar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance.
EJECT READY CROWN PAD OF THE ARAI GP-7 HELMET
Arai's optional Eject system can be easily accommodated via a pre-cut pocket under the helmet’s crown pad.
ARAI GP-7 HELMET SIZES
XS (54cm) - L (60cm)
ARAI GP-7 HELMET COLORS
Gloss White and Matte Black
Be sure to check out the Competition Motorsport Performance Racing Helmet Bag to keep your new Arai GP-7 safe and secure throughout each race weekend.
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Bell Racing Helmets
Bell MAG-10 Rally Sport Helmet FIA8859-2024
$699.95
Bell MAG-10 Rally Sport Helmet FIA8859-2024
The Bell MAG-10 Rally Sport Helmet FIA8859-2024 is designed specifically for rally drivers and co-drivers who demand clear communication, lightweight protection, and premium comfort. With advanced open-face styling and integrated electronics, it delivers confidence in the heat of competition.
Built for rally performance and endurance
Bell MAG-10 Rally Sport Helmet Features
- FIA 8859-2024 certified for compliance with current international rally safety standards- Lightweight composite shell construction for durability and reduced driver fatigue- Integrated ZeroNoise® electronics with high-power speakers and noise-cancelling microphone- Adjustable sun peak and built-in anti-scratch dark sun visor for glare protection- Removable, multi-density cheek pads for a customizable, secure fit- Factory-installed HANS/FHR anchors for head-and-neck restraint system compatibility- Noise-reducing ear cups to minimize outside interference during rally stages- Optimized ventilation for airflow and comfort during long events
Bell MAG-10 Rally Sport Helmet FAQs
Is this helmet approved for FIA rally events? Yes, the MAG-10 Rally Sport carries FIA 8859-2024 certification, making it suitable for most sanctioned rally competitions worldwide.
Does it include communication equipment? Yes, the helmet comes with integrated ZeroNoise® electronics, featuring speakers and a noise-cancelling microphone for crystal-clear communication.
Can I use this helmet with a HANS device? Absolutely. It includes factory-installed anchors for seamless HANS or other FHR system compatibility.
What makes it different from other Bell open-face helmets? The MAG-10 Rally Sport is purpose-built for rally, with advanced noise reduction, integrated comms, and a retractable sun visor tailored to the demands of stage and endurance driving.
The Bell MAG-10 Rally Sport FIA8859-2024 delivers a winning combination of safety, clarity, and comfort — everything a serious rally competitor needs to stay focused from start to finish.
Bell MAG-10 Rally Sport Helmet Size Chart
Bell Racing Helmets
Bell Racing Star Classic Vintage Helmet
$699.95
Bell Racing Star Classic Vintage Helmet
Reviving 1970s Formula One Heritage: The Bell Star Classic Racing Helmet
The Bell Star Classic harkens back to the famous Bell Star helmet design worn by Formula One drivers in the seventies. Fast-forward 50-odd years and Bell is re-launching this iconic helmet to the delight of true classic-car enthusiasts and historic-car racers around the world. The same shape as the iconic original Bell Helmets has been re-introduced while being fully updated to the latest safety standards of FIA 8859-2015 and Snell SA2020. By using the innovative modern production techniques and high-tech materials, Bell gives today's racing drivers a chance to experience the look of yesterday's pro driver heroes with modern comfort, safety, and features. Perhaps best of all is the stunning exterior in a specially-produced Bell Heritage White color with a gloss finish, complemented by the plush tan Comfort FR® interior.
Bell Star Classic Vintage Helmet Features and Design
Homologations: FIA 8859-2015 and Snell SA2020
Fiberglass composite shell
Exterior: Bell Heritage White
Interior: tan high-strength Comfort FR® fabric
Shield and pivot kit: clear Star Classic
Advanced single-density liner for excellent energy absorption and impact performance
M6 terminals for use with your FHR anchor attachment
Homologated for use with approved head-and-neck devices
Synthetic rubber gasket seal to prevent dirt and water entering the helmet
Dark Smoke shield available as an accessory
Sizes: Small through XL
For racers who refuse to compromise on style, comfort, or safety, the Bell Star Classic Helmet stands out as the ultimate helmet for circuit use.
Stilo S.r.l.
Stilo ST5 GT Composite Helmet SA2020
$649.00
$999.00
Stilo ST5 GT Composite Racing Helmet
The Most Customizable Helmet in the World
The Stilo ST5 GT Composite is Stilo's Snell SA2020 version of their best-selling kevlar-carbon composite helmet. With an autoclave molded shell, the Stilo ST5 GT Composite auto racing helmet offers superior safety and protection compared to fiberglass and composites of competitors helmets. You get all this without sacrificing comfort or features, as Stilo continues to focus on minimizing weight and maximizing flexibility.
With its large eye port, the Stilo ST5 GT Composite offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves.
Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (although some sanctioning bodies require FIA 8860 homologated helmets.)
Flexibility and Functionality Built In
The Stilo ST5 GT Composite is unsurpassed in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5 GT is sleek and seamless. When not in use, you don't even know the features are there.
Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market.
Additional shields in many tints and colors can be added in the dropdown above.
Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use.
Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the larger shell. Please order accordingly.
Stilo ST5.1 GT Racing Helmet Details
Noise attenuating earmuffs are included to reduce exterior noise.
Seamlessly integrate communications, forced air, hydration and/or eject options into your Stilo ST 5.1 GT helmet.
Snell SA2020 certification offers increased protection at higher g-forces and speeds than SA2015.
Existing Stilo ST5 visor shields and accessories work on ST5.1 SA2020 helmets.
Sizes shown in centimeters
Other Stilo ST5-Series Helmets Available
Stilo Helmets ST5.1 GT Carbon Helmet
Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet
Stilo Helmets ST5 GT 8860-2018 Carbon Helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Stilo S.r.l.
Stilo Venti4 Trophy Jet Titanium | FIA 8859 Helmet - No Hans
from $615.00
Stilo Venti4 Trophy Jet Titanium FIA 8859 Helmet - No Hans
Modern Open-Face Performance for Rally, Autocross, and Track Competition
The Stilo Venti4 Trophy Jet Titanium SA2025 FIA 8859 Helmet is a premium open-face auto racing helmet built for drivers who want updated safety certification, a refined interior, and a lightweight composite shell in a clean titanium finish. This No Hans version is a strong fit for competitors who need an open-face helmet platform without factory HANS posts included.
Stilo designed the Venti4 Trophy Jet around its latest Venti interior concept, combining upgraded plush padding, built-in top ventilation, and a prepreg composite shell layout aimed at dependable impact performance. With Snell SA2025 and FIA 8859 approval, this helmet is ready for a wide range of motorsports applications where an open-face design is preferred.
Stilo Venti4 Trophy Jet Titanium Features
Snell SA2025 approved open-face racing helmet
FIA 8859 certified
Prepreg composite outer shell construction
Gloss titanium finish with gray shell color
Updated Venti4 plush interior padding
Built-in top ventilation holes for improved airflow
Three shell sizes across the helmet range for improved fit scaling
Speaker cutouts included
Wired for audio
No intercom system included
No face shield included
Tear-off post compatible with posts included
Removable interior liner
Double D-ring chin strap
Helmet bag included
Sold individually
Open-Face Visibility with a Refined Venti4 Interior
The Venti4 Trophy Jet is designed for racers who value a wide, unobstructed field of view and an open-face feel. Stilo’s updated interior padding gives the helmet a more finished, comfort-focused fit, while the built-in top ventilation holes help maintain airflow during long driving sessions and warm competition days.
Prepreg Composite Shell with Current Safety Approvals
Stilo lists the Trophy Jet Titanium with a prepreg composite layup and certification to both Snell SA2025 and FIA 8859. That combination gives the helmet modern sanctioning relevance while keeping the product positioned as an accessible, high-quality option within Stilo’s open-face lineup.
No Hans Configuration
This listing is for the No Hans version of the Venti4 Trophy Jet Titanium. It is intended for drivers who want the helmet without HANS posts installed from the factory. Be sure to choose the configuration that matches your series requirements and personal safety setup.
Stilo Venti4 Trophy Jet Titanium Specifications
Brand: Stilo
Model: Venti4 Trophy Jet Titanium SA2025 8859
Configuration: No Hans
Helmet Family: Venti Trophy Jet
Helmet Type: Open Face Auto Racing Helmet
Certification Rating: Snell SA2025 and FIA 8859
Outer Shell Material: Composite
Finish: Gloss
Graphic Design: Titanium
Shell Color: Gray
Face Shield Included: No
Inside Liner Color: Black
Removable Inside Liner: Yes
Intercom Included: No
Speaker Cutouts: Yes
Wired for Audio: Yes
Internal Sun Visor Included: No
Tear-Off Film Included: No
Tear-Off Post Compatible: Yes
Tear-Off Posts Included: Yes
Chin Strap Type: Double D Ring
Ventilation: Yes
Helmet Bag Included: Yes
Quantity Sold: Individually
Stilo Venti4 Trophy Jet Titanium FAQs
Is the Stilo Venti4 Trophy Jet Titanium approved for auto racing?Yes. Stilo lists this helmet with Snell SA2025 and FIA 8859 certification.
Does this No Hans version include HANS posts?No. This listing is specifically for the No Hans configuration.
Does the helmet include an intercom system?No. Stilo lists the helmet as not including an intercom, although it does have speaker cutouts and is wired for audio.
Does the Venti4 Trophy Jet Titanium come with a visor or face shield?No. Stilo lists the helmet with no face shield included. The product overview notes that an optional short visor is available for the Venti4 helmet line.
What is the shell made from?The helmet uses a prepreg composite outer shell construction.
What updates does the Venti4 Trophy Jet bring compared with older open-face designs?Stilo highlights updated plush interior padding, built-in top ventilation, and the latest Venti interior design as key refinements in this helmet line.
The Stilo Venti4 Trophy Jet Titanium SA2025 FIA 8859 Helmet gives open-face racers a sharp titanium look, modern certification, and a refined comfort-focused platform built for serious motorsports use.
Bell Racing Helmets
Bell K1 Sport Helmet SA2025
$599.95
Bell K1 Sport Helmet SA2025
The Bell K1 Sport SA2025 is a versatile, track-ready auto racing helmet that blends modern protection with dependable comfort. It’s built for drivers who want a predictable fit, clear vision, and reliable airflow for everything from HPDE to club racing.
SA2025-rated safety with all-day track comfort
Bell K1 Sport SA2025 Helmet Features
- Snell SA2025 certified for current auto racing requirements- Lightweight composite shell engineered for strength without excess bulk- Wide eyeport for excellent peripheral vision and easy mirror checks- Effective ventilation with front intakes and rear exhausts to help manage heat- Energy-absorbing EPS and comfort liner for stable, secure fit at speed- Removable/replaceable interior pads to fine-tune fit and keep it fresh- Pre-threaded for head-and-neck restraint hardware (posts sold separately)- Clear shield with positive seal; tear-off ready- Compatible with common hydration and radio kits (sold separately)
Bell K1 Sport SA2025 Helmet Sizing Chart
Bell K1 Sport Helmet SA2025 FAQs
Is the K1 Sport approved for my events? It carries the Snell SA2025 certification, which is widely accepted for track days, time trials, and most club racing series. Always confirm with your sanctioning body.
How does the fit compare to other Bell helmets? It uses a familiar Bell oval/neutral shape designed to feel secure without pressure points when sized correctly.
Can I install HANS posts and comms? Yes. The shell is pre-threaded for head-and-neck restraint hardware, and there’s space to route common radio and hydration accessories.
Is the visor compatible with tear-offs? Yes. The shield accepts standard tear-offs and locks down firmly to maintain a clean seal at speed.
Step into a proven, SA2025-certified platform that keeps vision clear and temperatures manageable, so you can focus on braking points, turn-in, and lap-time consistency.
Add a Competition Motorsport Performance Racing Helmet Bag to your order and keep your new Bell Racing BR8 helmet safe and secure throughout each race weekend.
Upgrade your gear with the Bell K1 Sport Helmet SA2025 and experience uncompromising safety and comfort every time you hit the track.
Bell Racing Helmets
Bell Europe 500 TX Open Face Helmet | FIA 8859-2015 & SA2020
$599.95
Bell Europe 500 TX Open Face Helmet
Bell Europe 500 TX Open Face Helmet Features
Latest release of the 500 TX helmet
Designed in accordance with current FIA and Snell standards
Interior made of fire-resistant material
Removable sun-peak fitted
HANS clips are not included
Bell Europe 500 TX Open Face Helmet Size Chart
Bell Europe 500 TX Open Face Helmet Details
Color: Heritage White
Material: fiberglass
Homologations: FIA 8859-2015 and Snell SA2020
Bell Racing Helmets
Bell M.8 Sport Helmet SA2025
$499.95
Bell M.8 Sport Helmet SA2025
Premium Safety and Track-Ready Features
The Bell M.8 SA2025 is engineered for serious racers demanding maximum protection, superior ventilation, and consistent performance during endurance and sprint events. Designed to deliver safety, comfort, and visibility without compromise.
Bell M.8 SA2025 Helmet Features
Snell SA2025 certified to meet the latest auto racing safety standards
Shell made from high-strength composite materials for impact resistance and light weight
Wide, clear eyeport for excellent visibility and easy mirror adjustment
Comprehensive ventilation system with front intakes and rear exhausts to reduce heat buildup
Multi-density energy-absorbing liner to manage varying impact forces
Comfortable interior padding, fully removable and washable to maintain fit and hygiene
Pre-threaded posts for head-and-neck restraint system compatibility
Tear-off ready visor with secure locking mechanism to handle track conditions
Accessory-friendly design with space for communications/radio & hydration solutions
Bell M.8 Helmet SA2025 Sizing Chart
BELL M.8 SA2025 Helmet FAQs
What types of racing is the M.8 helmet suitable for? The SA2025 certification makes it suitable for most road racing, endurance, sprint, and club racing series. Always check with your sanctioning body or event organizer.
How true to size is the Bell M.8? It follows Bell’s standard “neutral/oval” shape. Many racers find that their usual Bell size works well. Fit should be snug but not painful, with no pressure points.
Can I use tear-offs with this helmet? Yes. The visor is designed to accept standard tear-offs and to seal tightly under high speed to prevent lift and fog.
Does the ventilation work well under hot track conditions? Yes, the combination of front intake vents and rear exhausts is engineered to promote continuous airflow, helping reduce heat soak during long sessions.
When every millisecond and moment of comfort matters, the Bell M.8 SA2025 delivers the protection, fit, and airflow to help you stay sharp from warm-ups to checkered flag.
Bell Racing Helmets
Bell MAG Rally Sport Helmet FIA 8859-2024
from $459.95
Bell MAG Rally Sport Helmet FIA 8859-2024
The Bell MAG Rally Sport Helmet delivers the perfect balance of safety, comfort, and communication. Certified to FIA 8859-2024 standards, this open-face helmet is designed for rally drivers and co-drivers who need lightweight protection and reliable audio performance on every stage.
Confidence in Every Stage
With its FIA-approved construction and built-in communications, the Bell MAG Rally Sport provides peace of mind and a competitive edge where it matters most.
Bell MAG Rally Sport Helmet FIA 8859-2024 Features
FIA 8859-2024 certified for the latest international safety standards. (no Snell SA rating)
Lightweight composite shell reduces fatigue during long rally stages.
Integrated ZeroNoise electronics with high-output speakers and noise-canceling microphone.
Female Nexus connector for easy plug-and-play intercom compatibility.
Adjustable sun peak for glare control during bright conditions.
Optimized ear cups for excellent noise isolation and communication clarity.
Bell MAG Rally Sport Helmet FIA 8859-2024 Size Chart
Bell MAG Rally Sport Helmet FIA 8859-2024 FAQs
Is the MAG Rally Sport Helmet approved for FIA rally events? Yes, it is FIA 8859-2024 certified and eligible for international rally competition.
Does this helmet come with built-in communications? Yes, it includes pre-installed ZeroNoise electronics with speakers, a microphone, and a Nexus connector.
Can I connect this helmet to my existing intercom system? Absolutely. The Nexus connector works with most leading rally intercom setups.
How comfortable is the MAG Rally Sport for long rally days? Its lightweight build, padded liner, and noise-isolating ear cups provide lasting comfort during multi-stage events.
Equip yourself with the Bell MAG Rally Sport Helmet FIA 8859-2024 and take on your next rally with proven safety, lightweight performance, and built-in communications you can count on.
OMP Racing
OMP GP-A Helmet | SA2025
$399.95
OMP GP-A Racing Helmet Snell SA2025
The OMP GP-A Composite Full Face Racing Helmet delivers professional-grade protection, lightweight comfort, and exceptional ventilation for serious racers competing across multiple motorsports disciplines. Featuring an updated optic white finish and Snell SA2025 homologation, the GP-A is designed for formula cars, GT racing, touring cars, and track day applications where safety and visibility are critical.
Lightweight Composite Helmet Designed for Modern Motorsport
The GP-A helmet utilizes a lightweight composite shell engineered to reduce fatigue during long race sessions while maintaining the strength and protection required for competitive motorsports. Its versatile standard-sized eyeport allows compatibility with both traditional shields and the optional touring sun peak visor for expanded functionality.
OMP GP-A Helmet Features
Lightweight composite shell construction
Updated optic white helmet design
Snell SA2025 certified
Four chin air intakes for enhanced airflow
Eight upper ventilation ports for cooling performance
Standard eyeport compatible with classic shields and optional touring peak
Suitable for formula, GT, touring, and multiple racing disciplines
Soft interior fabrics for superior comfort and fit
Factory-installed HANS posts
Double D-ring closure system
Available sizes: S through XL
Advanced Ventilation for Driver Comfort
The OMP GP-A helmet is equipped with an aggressive ventilation system featuring four chin vents and eight upper intake vents to maximize airflow through the helmet. This helps reduce heat buildup and improves driver comfort during demanding race conditions and endurance events.
Versatile Eyeport Design
The standard eyeport configuration allows racers to use either a traditional visor setup or the optional SC179 touring sun peak, giving the GP-A flexibility across different racing categories and driving environments.
Professional Interior Comfort
Soft interior padding materials provide a comfortable and secure fit while helping minimize pressure points during extended use. The helmet interior is designed to maintain stability and comfort while wearing communication systems and head restraint devices.
OMP GP-A Helmet FAQs
Does the helmet include HANS posts?
No, but they are available here.
What racing disciplines is this helmet suitable for?
The GP-A helmet is suitable for formula racing, GT racing, touring cars, track days, and various other motorsports applications.
Can I install a sun peak on this helmet?
Yes. The standard eyeport is compatible with the optional OMP SC179 touring sun peak, sold separately.
What sizes are available?
The OMP GP-A Composite Full Face Racing Helmet is available in sizes S through XL.
The OMP GP-A Composite Full Face Racing Helmet combines lightweight construction, advanced ventilation, Snell-certified protection, and versatile performance for racers who demand comfort and safety at every level of competition. Competition Motorsport is your source for premium OMP motorsport safety equipment.
Bell Racing Helmets
Bell MAG Sport Helmet SA2025
$399.95
Bell MAG Sport Helmet SA2025
The Bell MAG Helmet SA2025 delivers modern open-face performance in a lightweight and comfortable design. Perfect for drivers who prefer maximum visibility and ventilation while meeting the latest safety standards, the MAG is a versatile choice for track days, club racing, and vintage events.
Classic open-face design with modern safety
Bell MAG Sport Helmet SA2025 Features
- Snell SA2025 certified for current auto racing safety standards- Lightweight composite shell for strength without excess weight- Open-face design providing wide field of vision and natural airflow- Energy-absorbing multi-density EPS liner for impact protection- Comfortable interior padding designed for extended wear- Removable and replaceable cheek pads for personalized fit- Factory-installed HANS/FHR anchor points for head-and-neck restraint systems- Adjustable visor peak for sun and glare protection- Clean, simple design that works well for road racing, autocross, and rally
Bell MAG Sport Helmet SA2025 Sizing Chart
Bell MAG Sport Helmet SA2025 FAQs
Is the MAG Helmet SA2025 Snell approved? Yes, it meets the Snell SA2025 standard, making it legal for most racing organizations and track-day events.
What type of driver is this helmet best for? The open-face MAG is ideal for drivers in vintage racing, rally, and environments where airflow and visibility are priorities.
Can I use a HANS device with this helmet? Yes. The helmet includes factory-installed anchors for HANS or other FHR systems.
Does the Bell MAG have an adjustable visor? Yes, the included sun peak helps reduce glare and can be adjusted to driver preference.
The Bell MAG Helmet SA2025 combines trusted Bell safety with open-face comfort, making it a great fit for racers who want simplicity, protection, and visibility in one helmet.
Arai Helmet Limited
Arai GP-5W Helmet SA2020
$399.66
$849.95
Arai Auto Racing GP-5W SA2020 Helmet
The Arai Auto Racing GP-5W SA2020 Helmet is perfect for stock car, sedan, and rally drivers. The GP-5W Helmet is a favorite because of its wider, 90mm (approx 3.5” top to bottom) eye port opening. The GP-5W uses its own exclusive shield with this larger opening.
The Arai GP-5W is Snell SA2020 certified with M6 washer/nuts installed at the factory. Drivers of any experience level will be able to easily install their Head and Neck Restraint system anchor posts (sold separately). The Arai Auto Racing GP-5W SA2020 also comes with the FIA 8859-2015 certification sticker found on the shell’s interior lining.
Arai GP-5W Innovative SCLC Construction
The Arai GP-5W Helmet SA2020 is built with Arai's exclusive, very-lightweight SCLC (Super Complex Laminate Construction) shell technology. This ensures a low overall weight to balance the added weight of the helmet’s larger shield.
Arai GP-5W Helmet Shell Shape
he Arai Auto Racing GP-5W Helmet SA2020 helps reduce fatigue for the driver due to its more natural head shape, smaller shell size, and lower center of gravity to assist with balance and stability.
Interior Fit of the Arai GP-5W
The Arai Auto Racing GP-5W Helmet SA2020 is designed to closely match the shape of the human head, allowing for a snug, yet comfortable, fit. Arai has developed this “natural” shape over more than 50 years of helmet design research and refinement.
Wide-View Eye Port
Sedan drivers will appreciate the larger, 90mm eye port, top to bottom. A visor peak is available for drivers not needing a shield on the The Arai Auto Racing GP-5W Helmet SA2020.
Removable/Replaceable Cheek Pads
Low maintenance, easy-to-clean cheek pads are removable, washable, and replaceable with pads of varying thickness to provide a snug, safe fit.
M6 HANS Anchor Threads
The FIA 8859-2015 certified GP-5W helmet has M6 threaded washer/nuts with 6mm threads pre-installed. This convenient feature lets the driver use the anchor system that works best with their Head and Neck Restraint. The anchor posts are made to rest flush on the helmet surface, accepting a variety of HNR anchor systems.
Arai GP-5W Extraordinary Ventilation
Closed-cockpit drivers need greater airflow when racing. The upper ventilation system of the GP-5W SA2020 helmet incorporates two exhaust vents and two large intake ducts to help keep the driver cool and comfortable.
Available Visors for the Arai GP-5W
Available shields for the Arai GP-5W are available here. Arai anti-fog shields are available in clear, light tint and dark smoke. Standard shields also come in clear, light tint and dark smoke.
Don't forget to check out the Competition Motorsport Performance Racing Helmet Bag to keep your new Arai GP-5W safe and secure throughout each race weekend.
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship to you with signature required for delivery.
Stilo S.r.l.
Stilo Venti Sport Jet Composite Helmet SA2020
from $289.00
$414.00
Stilo Venti Sport Jet Composite Helmet
Hey speed demons and track day enthusiasts! Are you ready to turn heads while protecting yours? Meet the latest game-changer in the world of open-faced rally helmets: the Stilo SA2020 Venti Sport Jet Composite Helmet. It's not just a helmet; it's your new best friend on the track.
Stilo SA2020 Venti Sport Jet Composite Helmet Features & Benefits:
Snell SA2020 & FIA 8858 Homologation: Because your noggin deserves nothing less than top-notch protection.
New for 2024: Be the trendsetter in your racing circle with the latest and greatest from Stilo.
Fiberglass Kevlar Composite Shell: Like wearing a fortress on your head, but way cooler and much lighter.
Adjustable Peak with HANS Post Pre-Installed: Because the sun shouldn't be your biggest challenge on the track.
Two Slick Designs: Choose between the "Jet" and the "Plus" – because why not look fabulous while lapping everyone else?
Venti Sport Plus: Comes with a Boom Mic + Speakers. Talk about having a soundtrack to your victory!
White Only: Because sometimes, classic is best. Plus, it matches with everything!
Stilo SA2020 Venti Sport Jet Composite Helmet Product Specifications
Shell Construction: Fiberglass/Kevlar MSF (multi sandwich fiber) – like a superhero's armor, but for racing.
Certifications: Snell SA2020, FIA 8859 – because safety is sexy.
Design Variations: "Jet" for the purists, "Plus" for the tech-savvy racers.
Communication Ready: Only in Venti Sport Plus, because who doesn't like to stay connected?
Stilo SA2020 Venti Sport Jet Composite Helmet FAQs
Q: Can I use this helmet for professional racing? A: Absolutely! With Snell SA2020 and FIA 8859 certifications, you're more than ready for the big leagues.
Q: Is it comfortable for long races? A: You bet! It's like a cloud on your head. Well, a very safe and stylish cloud.
Q: Can I customize it? A: The white canvas is yours to personalize. Go wild!
Why You Need This Helmet
Imagine this: You're on the track, the engine's roaring, adrenaline's pumping. You feel invincible, yet safe. That's the Stilo SA2020 Venti Sport Jet experience. It's not just about safety; it's about making a statement. Whether you're a seasoned racer or a weekend track warrior, this helmet will elevate your game.
Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market.
Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use.
Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the larger shell. Please order accordingly.
Other Stilo ST5-Series Helmets Available
Stilo Helmets ST5.1 GT Carbon Helmet
Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet
Stilo Helmets ST5 GT 8860-2018 Carbon Helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
Bell Racing Helmets
Bell M.8 Helmet SA2020
$199.66
$549.95
Bell Racing Helmets M.8 SA2020 Helmet
The Bell Racing M.8 Composite Helmet SA2020 succeeds the Bell M-Series Concept, ideal for racers who want a larger field of vision (perfect for eyeglass wearers) along with the latest Bell performance and styling. The Bell M.8 Composite racing helmet has traditional styling while offering a wide range of updated features for all types of racing: open wheel, closed car, karting, and more.
The lightweight composite shell of the Bell M.8, Comfort-Plus FR® interior, manual air intake vents, and bigger eye opening all contribute to superior protection, comfort, and air flow to keep you safe and cool under pressure.
ADDITIONAL BELL M.8 HELMET SHIELDS AVAILABLE HERE
Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL M.8 racing helmet safe and secure throughout each race weekend.
BELL M.8 AUTO RACING HELMET SIZE CHART
BELL M.8 AUTO RACING HELMET AVAILABLE COLORS
Gloss White
Matte Black
BELL M.8 AUTO RACING HELMET FEATURES
Snell SA2020 homologation.
All sizes are in centimeters.
SRV-8 3mm SRV clear shield (SRV-1 pivot system).
Lightweight composite shell with high-pressure molding system for improved shell strength.
High-impact, multi-piece, multi-density custom bead absorbing liner improves low- and high-velocity impact protection.
Install integrated radio microphone, drinking tube systems (both sold separately) with integrated channels in the face piece.
Black Comfort-Plus FR® interior fabric for excellent moisture wicking and durable quality.
Multi-foam density standard interior for superior fit.
Optimum airflow ventilation system with direct-flow chin bar vents, manual level air intake vents.
Air, dirt, and water won’t get past the hollow synthetic rubber gasket seal.
Larger eyeport than many other models.
M6 terminal hardware and hex wrench to install your Head and Neck Restraint Device
