Driver Cooling & Hydration

Chillout Systems 3" Carbon Fiber NACA Duct Chillout Systems 3" NACA duct is manufactured in lightweight carbon fiber with the intention of reduced parasitic drag while providing cooling air for Chillout Systems coolers, driver helmets, oil coolers and more.  Chillout Systems 3" Carbon FIber NACA Duct Details: Manufacturer: Chillout Systems Manufacturer part number: NP-3 Material: Carbon Fiber Hose Outlet Diameter: 3" Color: Carbon Fiber NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn't separate and cause turbulence and drag. Chillout Cooler sold separately.

Chillout Systems Insulated Coolant Hose The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. Six to ten feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle. Hose too long for your set-up? Solution: cut hose to desired length. Our hoses comes with an extra supply of matching shrink wrap for a flawless, durable, clean look. FEATURES: The 10-Foot hose includes additional heat shrink tubing for custom sizing while maintaining a finished look. Male connectors, two pieces. Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length (including Y connector).  Double-Layer Insulation: one layer to protect the hose, a second to keep your coolant cool and efficient. 

Paragon 4.4AH Li-Ion Arctic Wolf/Fox Battery Paragon’s Arctic Wolf/Fox Battery is a 4.4 Amp-hour lithium-ion battery designed for use with your Paragon Arctic Wolf or Arctic Fox Cooler Bag. The Arctic Wolf/Fox 7.4V battery provides up to 132 minutes of continuous run time with each full charge. Paragon Arctic Wolf/Fox Battery Charger sold separately. Paragon Li-Ion Battery For Arctic Wolf/Fox Details Manufacturer: Paragon Manufacturer part no.: 02-29400 Battery voltage: 7.4V Battery amp/hours: 4.4 AH Charger included: no Weight: 1 lb.

Coolshirt Cool Water Hooded Shirt  The Coolshirt Cool Water shirt paired with a Coolshirt Club System or MobileCool Bag System (sold separately) circulates cooled water over the driver’s torso, keeping them comfortable and focused on the race track! The Coolshirt Cool Water shirt connects to any cooling system with a quick-disconnect insulated hose. Advanced moisture-wicking properties, antimicrobial protection, and “clean seam” tubing sewn into the interior of the Coolshirt Cool Water shirt keeps the driver cool, dry, and comfortable. The patented non-kink tubing helps ensure consistent, continual cooling. All Coolshirt Cool Water shirts are easy-care with no special laundering needed. Just machine wash and hang to dry. Won’t pick, fade, or shrink. Cool Water shirt is available in black or white.

FluidLogic WAVE Bottle and Mount  BOTTLE & MOUNT ONLY The new WAVE of hydration is here! This bottle and mount fit the FluidLogic WAVE hydration system, keeping your drink of choice cold and secure for your entire ride. FluidLogic WAVE Bottle & Mount Features & Benefits Kitchen grade stainless steel is rust resistant Quick release bottle mount secures to any roll bar for convenient filling Available in 32-oz. or 64-oz. capacity for short or long rides Keeps your drink cold for up to eight hours Stay hydrated outside your vehicle when parked at your favorite spot Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day This Kit Includes: 32-oz. or 64-oz. stainless steel FluidLogic WAVE bottle Roll bar quick-release mount & hardware Does not include drink tube

Maglock Air Kit **Maglock Air hose NOT included** Connection Perfection for forced air helmets. Universal helmet & air hose fitment from the high G's at Indianapolis to the weekend on/offroad racer, MagLock® holds strong. No more duct tape or zip ties, MagLock® technology creates an air-tight seal with 20lbs of force that will only let go when you need it to. Lightweight nylon-infused ABS construction stands up to the rigors of motorsports and recreation.  Designed in California, food safe, fire resistant, and features patented technology.

Paragon Everest Helmet Cooling Insert The Paragon Everest Helmet Cooling Insert is designed specifically to cool your head while you're wearing a racing helmet, and it works in concert with any other Paragon cooling garments. The Paragon Everest Helmet Insert requires replacement after each racing season due the material qualities that provide its extremely light weight and flexibility. The Paragon Everest Helmet Cooling Insert is designed for optimum performance and cooling efficiency under the harshest, hottest racing conditions. Pair It With A Paragon Cooling System The Paragon Everest Helmet Cooling Insert can be used on its own, but it is especially effective when paired with Paragon Cooling Water Shirt and a Viking System or Arctic Bag System (each sold separately). Using a Paragon Guardian Y-Hose, this allows you to circulate ice-chilled water over the wearer's head and torso, keeping you comfortable and focused especially during those hot, late laps when heat fatigue can easily set in. Paragon Everest Helmet Cooling Insert Details Manufacturer: Paragon Sizes: one size Weight: 1 lb. Dimensions in inches: 12 x 5 x 1

Chillout Systems No Drip 1/4" Shirt Adapters No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.  Chillout Systems No Drip 1/4" Shirt Adapter Details: Manufacturer: ChillOut Systems Manufacturer Part Number: CO-DLC-1 Works with other ¼" cooling shirts: Yes Quantity: 4 Pieces (2 complete sets) We have found in very long endurance races such as the 2021 World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.

Paragon Viking Cooler Mounting Tray Paragon’s Viking Cooler Mounting Tray is designed to provide a customized mounting option with protection for Paragon’s Viking and Viking Pro driver cooling systems. The Paragon Viking Cooler Mounting Tray includes two Viking tray straps that secure the cooler while allowing access to the interior without having to remove the cooler from the tray. Made from a single sheet of steel and powder-coated black for durability. The Viking Cooler Mounting Tray is available to fit either the 12L or 18L Paragon Viking cooler. Paragon Viking Cooler Mounting Tray Dimensions Fits 18L cooler: 4 lbs., 16" x 10" x 6" Fits 12L cooler: 3 lbs., 14" x 9" x 4"

The Rapid Release dry break system, makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure. Just a quick press, and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied. FEATURES: Effortless dry break system Emergency release feature  INCLUDED: 2 x 1/4" barbed quick-release fittings 1 x driver-side handle 2 x 36" reinforced, non-kinking extensions 2 x 1/4th to 5/16th barrel connectors 2 x 1/4th to 1/4th barrel connectors 2 x 36" reinforced cooling tubes

Paragon 240 CFM Air Blower The Paragon 240 CFM Air Blower is designed for efficient, high-output performance in the stressful environment of a race car. Paragon's 240 CFM Blower runs on 12V, features front and rear shaft seals, and a corrosion resistant motor housing for superior durability and longevity. All while providing high air flow, with a low 4.3 amp draw and smooth, quiet operation. Paragon 240 CFM Air Blower Details Manufacturer: Paragon Manufacturer part no.: 01-51000 Inlet diam: 4.0" Outlet diam: 4.0" Weight: 1 lbs. Voltage: 12V Amps: 4.3A

Coolshirt Cool Water Shirt The Coolshirt Cool Water shirt paired with a Coolshirt Club System or MobileCool Bag System (sold separately) circulates cooled water over the driver’s torso, keeping them comfortable and focused on the race track! The Coolshirt Cool Water shirt connects to any cooling system with a quick-disconnect insulated hose. Advanced moisture-wicking properties, antimicrobial protection, and “clean seam” tubing sewn into the interior of the Coolshirt Cool Water shirt keeps the driver cool, dry, and comfortable. The patented non-kink tubing helps ensure consistent, continual cooling. All Coolshirt Cool Water shirts are easy-care with no special laundering needed. Just machine wash and hang to dry. Won’t pick, fade, or shrink. Cool Water shirt is available in black or white.

Chillout Systems Wiring Harness This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.

Paragon Guardian Water Hose Set Paragon’s innovative Guardian Water Supply/Return Hose Set is designed for efficiency and durability. The Guardian Hose is insulated to keep your cooling garment supplied with icy cold water from a Paragon Viking or Arctic Fox cooler. The supply side of the Paragon Guardian Water Supply Hose delivers cooling water to the tubing inlet of your garment, while the return side of the hose set returns water warmed by body heat back to the cooler to be re-chilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to your cooling garment. Paragon Guardian connectors on the hose set are designed for emergency release, allowing you to easily disconnect with a quick pull on the hose set or garment. Paragon Guardian Supply Hose Lengths 4 feet (2 lbs.) 8 feet (2 lbs.) 12 feet (3 lbs.) 20 feet (4 lbs.)