Driver Cooling & Hydration

Chillout AirCon V2 Helmet Cooler The Ultimate Solution for Motorsport Stay cool, focused, and at peak performance with the AirCon V2 Helmet Cooling System—the most advanced helmet cooling technology engineered for professional and amateur motorsport drivers. Whether you're racing in extreme heat or need to maintain cognitive clarity during long stints, the AirCon V2 delivers continuous, powerful, and dry cooling airflow directly to your helmet, reducing heat stress and moisture buildup. Designed with cutting-edge micro-compressor technology, this compact and lightweight system is built to withstand the harshest racing conditions, ensuring maximum reliability and efficiency on track. Chillout Aircon V2 Key Features 500W Cooling Power – Delivers temperature-controlled, dry air to prevent overheating and improve driver endurance. Adjustable Cooling & Airflow – Set your preferred cooling level with temperature adjustments from 50°F – 80°F and three fan speeds (Low, Medium, High). Lightweight & Compact – Weighing just 7.8 lbs (5.8 kg), the system can be mounted in various locations for maximum convenience. Quick-Release Mounting System – Securely fastens using a carbon fiber baseplate with ball-lock pins for rapid installation and removal. 12V/24V DC Compatibility – Easily integrates into most race car electrical systems or external power sources. Wired Remote Controller – Provides cockpit control over temperature, fan speed, and system settings for on-the-fly adjustments. Eco Mode – Optimized power management to keep amp draw under 15A, ensuring efficient cooling without compromising vehicle performance. Integrated Safety Protections – Low-voltage shutoff (9V-10V) and overcurrent protection (35A max) to safeguard electrical systems. Unmatched Performance From endurance racing to off-road, the AirCon V2 is engineered for drivers who push the limits. Capable of reducing air temperature by up to 32°F (18°C) below ambient conditions, this system ensures sustained comfort in extreme environments, preventing sweat accumulation and maintaining focus when it matters most. Built for rugged durability, high-efficiency cooling, and rapid deployment, the AirCon V2 sets the new standard for driver cooling technology across all forms of motorsport. What’s Included AirCon V2 Helmet Cooling Unit Carbon Fiber Mounting Plate 10 ft Insulated Wiring Harness Quick-Release Ball-Lock Pins Rubber Stand-Offs Wired Remote Controller DESIGN WITHOUT COMPROMISE Crafted with precision and powered by cutting-edge cooling technology, the Chillout AirCon V2 Helmet Cooler is designed for drivers who refuse to compromise on performance, safety, or comfort. The AirCon V2 Helmet Cooler is extraordinarily lightweight, ensuring that it doesn't add any unnecessary burden as you navigate those sharp turns at high speeds. Its streamlined design fits seamlessly into your racing gear bag, making it an extension of your drive to win. ENGINEERED FOR FLEXIBLE, SUPERIOR COOLING What sets this helmet cooler apart is its superior cooling capabilities. Engineered to generate nearly 32 CFM of airflow, the Chillout AirCon V2 Helmet Cooler lowers critical in-hemet temperatures, helping you stay cool and focused during even the most grueling races. The AirCon V2 Helmet Cooler also offers adjustable speed controls, letting you to customize your cooling based on your personal preferences and changing track conditions. Join the ranks of the top-performing drivers who've turned the tables on heat with the Chillout AirCon Helmet Cooler. Order yours today and redefine your racing experience. Because in motorsports, the coolest head nearly always prevails! CHILLOUT AIRCON HELMET COOLER DETAILS Effortless Detachment for Mobile Teams: The AirCon has a quick-release mechanism that allows teams to easily detach the unit from its base, making it ideal for mobile operations. Variable Speed Settings: The AirCon comes with adjustable controls for a comfortable range of air speeds. These settings can be managed from a full-color LCD display. Optional Remote Control: Dash-mountable remote control with 10-foot cord puts temperature control and power on/off at your fingertips. Lightweight Design: Despite its robust performance capabilities, the AirCon is lightweight, enhancing user comfort and ease of use. Cooling Effectiveness: The helmet creates a cooler environment around the wearer's head. Air-conditioned helmets can cool the head by as much as 15º F. CHILLOUT AIRCON HELMET COOLER SPECS Weight: 10 lbs. / 4.55 kg Dimensions: 12.25"L x 6.75"W x 7.00"H CHILLOUT AIRCON HELMET COOLER INCLUDES AirCon Helmet Cooler Carbon Fiber Mounting Plate Wiring Harness Locking Ball Pins Priming Tube Rubber Stand-Offs Carbon Fiber intake plenum (shown) sold separately.

Chillout Remote Control For AirCon Helmet Cooler Engineered for Performance on the Track When your Chillout AirCon Helmet Cooler is mounted out of reach—like in the trunk or behind your seat—you need a smart way to control it. Enter the Chillout Remote Control: a compact, dash-mountable controller with a full-color digital display and a generous 10-foot cord. With this unit, you can power the system on and off, adjust temperature settings, and stay cool without ever having to reach around mid-session. This isn't just a convenience—it's essential for drivers who value control, comfort, and staying in the zone during hot sessions on track. Features: • Built specifically for the Chillout AirCon Helmet Cooler • Full-color digital display for quick at-a-glance settings • 10-foot cord offers flexible mounting anywhere in the cockpit • Lightweight, compact, and easy to install on your dash or console FAQs: Will this work with any Chillout system? No, this remote is designed exclusively for the Chillout AirCon Helmet Cooler. Where can I mount the remote? The 10-foot cord allows you to mount it on your dashboard, center console, or roll bar. Does it require tools for installation? Basic mounting tools may be needed, but setup is very simple. What’s included in the box? The remote unit and a 10-foot connection cord are included. Take full control of your in-car cooling system with this essential remote. A smart upgrade for any serious racer running the Chillout AirCon Helmet Cooler.

Chillout Systems 3" Ultra Transparent NACA Duct For racers who demand maximum airflow and minimal drag, the Chillout Systems 3" Ultra Transparent NACA Duct is the real deal. Engineered with wind tunnel precision and made from durable crystal-clear injection-molded plastic, this is the duct that doesn’t cloud, crack, or compromise performance. Built for Airflow Dominance and Visual Clarity Features: Crystal-Clear Injection Molded Construction: Unlike cloudy, brittle vacuum-formed ducts, Chillout's ultra-transparent NACA duct is built to stay clear and structurally solid, even under harsh heat and UV exposure. 3-Inch Opening for Maximum Flow: Perfectly matched to Chillout's Uber3 275 CFM blower, 3” tubing, and 3” plenum for an airflow system that’s efficient and track-proven. IMSA Compliant: Fully legal for IMSA applications, giving you confidence in compliance without sacrificing performance. Drag-Reducing Design: The graceful widening arc of the NACA duct shape increases flow without disturbing boundary layers—so you get the air you need without the aerodynamic penalty. Track-Ready Durability: Injection molding ensures the duct retains its shape at speed, resists warping, and maintains optical clarity for the long haul. Chillout Systems 3" Ultra Transparent NACA Duct FAQs: Is this 3" NACA duct compatible with any blower system?No, it's specifically optimized to work with Chillout’s Uber3 275 CFM blower and 3-inch ducting and plenums for best results. Does the plastic stay clear over time?Yes. Unlike vacuum-formed plastic, the injection-molded construction resists heat and UV damage, maintaining its crystal-clear appearance. Is this legal for use in IMSA races?Yes. This NACA duct meets IMSA regulations and is designed with competition use in mind. Can this be mounted on fiberglass or carbon fiber panels?Absolutely. The duct is lightweight and easy to mount to fiberglass, carbon fiber, or metal body panels using standard installation techniques. When every bit of airflow counts and clarity is key, step up to the Chillout Systems 3" Ultra Transparent NACA Duct. It’s not just another intake—it’s a smarter way to cool your rig while keeping drag in check. Chillout Cooler sold separately.

Chillout Systems Revolution 4-Inch Variable Speed Blower The Chillout Systems Revolution 4-Inch Brushless Blower delivers maximum airflow, adjustability, and durability for demanding motorsport applications. Engineered with a conformal-coated control board and a lightweight carbon fiber-reinforced housing, it provides precise cooling control while standing up to extreme racing environments. More Volume, More Cooling Control With variable speed operation from 30 to 420 CFM, this blower provides unmatched airflow flexibility. Whether you’re competing in long endurance races or quick sprint events, it ensures cockpit comfort so you can keep your focus on performance and results. Features Variable speed airflow: 30–420 CFM for complete adjustability Lightweight, rugged housing with vibration-resistant mount points Carbon fiber-reinforced thermoplastics for impact resistance and rigidity 4-inch duct connection for maximum airflow volume Seamless compatibility with Chillout Systems air distribution setups Backed by a one-year manufacturer warranty Specifications CFM: 30–450 (ships preset at 310) Inlet Pressure: -6.5 in. H₂O Outlet Pressure: +4.5 in. H₂O Voltage: 13.8 VDC (range: 11–17.5 V) Amperage: 7.5 A as shipped, 12.5 A at max Dimensions: 3.25 in. diameter × 5.25 in. length Weight: 8.45 oz / 240 g Connector: Male Deutsch DDT04-2P, 6-inch lead wire Chillout Systems Revolution 4-Inch Blower FAQs Is this blower compatible with Chillout Systems? Yes, it integrates directly with Chillout air distribution setups. Can the airflow be adjusted while racing? Yes, the variable speed control allows real-time adjustment for changing conditions. What electrical system does it require? It runs on 13.8 VDC and supports a range of 11–17.5 V typical in motorsport setups. How durable is the housing? The carbon fiber-reinforced thermoplastic construction ensures strength, lightweight performance, and long-term reliability. Get the ultimate in cockpit cooling performance with the Chillout Systems Revolution 4-Inch Brushless Blower.

Chillout Systems 4" Carbon Fiber NACA Duct Ultralight weight and wind tunnel tested, the Chillout 4-inch NACA duct provides over 55% more airflow than a standard 3-inch NACA duct. Used in conjunction with 4-inch Neoprene Air Duct Hose and a 4-inch Chillout Carbon Fiber Plenum (both available in the drop downs above), the Chillout Carbon Fiber NACA Duct results in maximum cooling efficiency for your cooling system.NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn’t separate and cause turbulence and drag. FEATURES: Dry carbon fiber for light weight and durability. Wind tunnel tested. 55% more airflow than 3" NACA duct. Chillout Cooler sold separately.

Chillout Systems 3" Carbon Fiber NACA Duct Chillout Systems 3" NACA duct is manufactured in lightweight carbon fiber with the intention of reduced parasitic drag while providing cooling air for Chillout Systems coolers, driver helmets, oil coolers and more.  Chillout Systems 3" Carbon FIber NACA Duct Details: Manufacturer: Chillout Systems Manufacturer part number: CO-NP-3 Material: Carbon Fiber Hose Outlet Diameter: 3" Color: Carbon Fiber NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn't separate and cause turbulence and drag. Chillout Cooler sold separately.

Chillout Systems Insulated Coolant Hose The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. Six to ten feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle. Hose too long for your set-up? Solution: cut hose to desired length. Our hoses comes with an extra supply of matching shrink wrap for a flawless, durable, clean look. Chillout Systems Insulated Coolant Hose Features The 10-Foot hose includes additional heat shrink tubing for custom sizing while maintaining a finished look. Male connectors, two pieces. Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length (including Y connector).  Double-Layer Insulation: one layer to protect the hose, a second to keep your coolant cool and efficient. 

FluidLogic WAVE Bottle and Mount  BOTTLE & MOUNT ONLY The new WAVE of hydration is here! This bottle and mount fit the FluidLogic WAVE hydration system, keeping your drink of choice cold and secure for your entire ride. FluidLogic WAVE Bottle & Mount Features & Benefits Kitchen grade stainless steel is rust resistant Quick release bottle mount secures to any roll bar for convenient filling Available in 32-oz. or 64-oz. capacity for short or long rides Keeps your drink cold for up to eight hours Stay hydrated outside your vehicle when parked at your favorite spot Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day This Kit Includes: 32-oz. or 64-oz. stainless steel FluidLogic WAVE bottle Roll bar quick-release mount & hardware Does not include drink tube

Maglock Air Kit **Maglock Air hose NOT included** Connection Perfection for forced air helmets. Universal helmet & air hose fitment from the high G's at Indianapolis to the weekend on/offroad racer, MagLock® holds strong. No more duct tape or zip ties, MagLock® technology creates an air-tight seal with 20lbs of force that will only let go when you need it to. Lightweight nylon-infused ABS construction stands up to the rigors of motorsports and recreation. 

Paragon Viking Extreme Max 110V Team Cooler Paragon’s 61L Viking Extreme Max multi-person 110V cooler is an absolutely amazing multi-person cooling option for racers with access to 110-volt power. In fact, keeping cool with the Viking Extreme Max is so fantastic on those sweltering afternoons in the paddock or pits, we would get a generator just to plug in an Extreme Max cooler. The 61L capacity Paragon Viking Extreme Max cooler is built in the USA to be durable enough to stand up to race weekends, and ultra-efficient with its 110-volt fluid pump providing strong, constant circulation of chilled water through several Paragon cooling garments at the same time. This large-capacity cooler works exclusively with Paragon cooling garments. American Made Race Team Cooling Perfection The American-made Paragon Viking Extreme Max Cooler keeps you and your team cool, comfortable, and alert so everyone can perform at their best in the heat of competition. Heat fatigue is a big factor in loss of focus and concentration. Now everyone can stay cool waiting in the pits for each fuel stop or driver change. Paragon Viking Extreme Max Cooler Details Manufacturer: Paragon Manufacturer part no.: 80-23100 Cooler capacity: 61 liters Operating voltage: 110V Dimensions (external): 30.5"L x 17.25"W x 17"H Weight (dry): 34 lbs Cooling garment connections: 6 outlets/inlets

Paragon Viking Pro Air & Water Cooling Bundle The Paragon Viking Pro Air & Water Bundle can be used with any Paragon cooling garment. It effectively sends temperature-controlled cooling water through the garment along with blower-enhanced, cooled, HEPA-4 filtered air to your helmet.  The Paragon Viking Pro Air & Water Bundle provides 300 Watts (1,023 BTU) of continuous cooling per hour. Its 240 CFM blower and 12- or 18-Liter cooler unit with internal pump deliver temperature-controlled cool water to your Paragon cooling garment (sold separately) and chilled air to your helmet. Eight feet of double-insulated water hose, complete with dry quick-disconnects and an automatic shutoff, attach your cooling shirt to the unit. Paragon Viking Pro Air & Water Bundle Details Manufacturer: Paragon Paragon 12- or 18-liter cooler with internal 12V fluid pump Cooler mounting tray with two straps 8-foot insulated Guardian water supply hose with dry-break disconnects 240 CFM air blower 10 foot x 1.25" air hose 5 foot x 3.0" air hose 1.25" hose end fittings (2) Angled helmet fitting 4" blower hose fitting 4" blower filter housing fitting Blower air filter Blower air filter screen Everlast Ice cool pack Defense Solution (16 oz.) Paragon cooling garments sold separately.

Paragon Viking Extreme 110V Multi-Person Cooler Paragon’s 57L Viking Extreme multi-person 110V cooler is a terrific multi-person coolre for racers with access to 110-volt power. In fact, keeping cool with the Viking Extreme is so great on those sweltering race days, we would go so far as to get a generator just to plug in a Paragon Extreme cooler. The large-capacity Paragon Viking Extreme cooler is built to be durable enough to stand up to race weekends, and ultra-efficient with its 110-volt fluid pump providing strong, constant circulation of chilled water through several Paragon cooling garments at the same time. This large-capacity American-made cooler works exclusively with Paragon cooling garments. A Cool Race Crew Is A Safe, Effective Crew The Paragon Viking Extreme Cooler keeps you and your team cool, comfortable, and alert so everyone can perform at their best in the heat of competition. Heat fatigue is a big factor in loss of focus and concentration. Now everyone can stay cool waiting in the pits for each fuel stop or driver change. Paragon Viking Extreme Cooler Details Manufacturer: Paragon Manufacturer part no.: 52-23000 Cooler capacity: 57 liters Operating voltage: 110V Dimensions (external): 20"L x 20"W x 20"H Weight (dry): 29 lbs Cooling garment connections: 6 outlets/inlets

Paragon Arctic Air Cooling Cylinder Paragon’s Arctic Air Cylinder is designed to be used in conjunction with the Paragon Viking Cooler, Paragon Cooling Water Y-Hose, and Paragon 1.5" Air Hose to allow chilled air to flow through your helmet. The Arctic Air Cylinder circulates chilled water internally, cooling and dehumidifying the passing air before it reaches your helmet. This keeps your head significantly cooler and helps keep your visor fog-free. The Paragon Arctic Air Cooling Cylinder is light weight and compact at 14 inches in length (not including the supply/return tubing pigtails) and weighing only 3 lbs. The Paragon Arctic Air Cooling Cylinder Details Manufacturer: Paragon Manufacturer part no.: 05-59000 Weight: 3 lbs. Length (cooling cylinder): 14 in. Inlet diameter: 2.0 in. Outlet diameter: 1.5 in.

Paragon Arctic Fox Pro 6 Liter Li-Ion Bag Cooler Paragon’s Arctic Fox Pro Cooler Bag is the amped-up, battery-powered version of their 6-liter Arctic Fox Cooler Bag, one of the most versatile portable cooling bags on the market. The Arctic Fox Pro Cooler Bag takes driver cooling performance up a notch, with an interior heavy-duty bladder that houses a 12V pump and more capacity for ice and cooling water. Yet it weighs only 4 lbs. including the Li-ion battery! The front-exit Guardian bulkhead connectors are Paragon’s emergency release option, allowing the driver to easily disconnect with a quick pull on the connected hose set. The Arctic Fox Pro Cooler Bag has a 6L capacity, and it works seamlessly with most cool suit brands. Paragon Arctic Fox Pro Portable Bag Cooler Details Manufacturer: Paragon Manufacturer part nos.: 61-24000 Included Battery: 7.4V Li-ion rechargeable Battery Charger: included Interior capacity: 6 liters Weight: 4 lbs. Dimensions in inches: 12x10x10 Developed for use in all types of racing, the Paragon Arctic Fox Pro Cooler Bag provides drivers with a no-compromise personal cooling solution in race cars that have limited space or no place to mount a standard, hard-sided cooler. The Arctic Fox Pro Cooler Bag is especially convenient for road racers and track-day enthusiasts with more than one car, as it's easily moved from one car to another as needed. Drag racers are also discovering its versatility, and it has also become very popular with driving-school instructors with its Lithium-ion battery powered portability. The Arctic Fox Pro Cooler Bag provides the same superior cooling as Paragon's legendary fixed-cooler systems. It keeps drivers cool and mentally alert, especially during those final laps when heat fatigue and dehydration can be at their worst.

Paragon Arctic Wolf Pro Portable Bag Cooler Paragon’s Arctic Wolf Pro Cooler Bag is the amped-up version of their Arctic Wolf Cooler Bag, one of the most versatile portable cooling bags on the market. The Arctic Wolf Pro Cooler Bag takes driver cooling performance up a notch, with an interior heavy-duty bladder that houses a 12V pump and more capacity for ice and cooling water. Yet it weighs only 5 lbs. including the Li-ion battery! The front-exit Guardian bulkhead connectors are Paragon’s emergency release option, allowing the driver to easily disconnect with a quick pull on the connected hose set. The Arctic Wolf Pro Cooler Bag is available in either a 6L or 10L (1.6 gal. or 2.6 gal.) capacity, and it works seamlessly with most cool suit brands. Paragon Arctic Wolf Pro Portable Bag Cooler Details Manufacturer: Paragon Manufacturer part nos.: 11-24000 (6L) or 21-24000 (10L) Included Battery: 7.4V Li-ion rechargeable Battery Charger: included Weight: 5 lbs. Dimensions in inches: 16x12x8 (6L) or 18x14x8 (10L) Developed for use in all types of racing, the Paragon Arctic Wolf Pro Cooler Bag provides drivers with a no-compromise personal cooling solution in race cars that have limited space or no place to mount a standard, hard-sided cooler. The Arctic Wolf Pro Cooler Bag is especially convenient for road racers and track-day enthusiasts with more than one car, as it's easily moved from one car to another as needed. Drag racers are also discovering its versatility, and it has also become very popular with driving-school instructors with its Lithium-ion battery powered portability. The Arctic Wolf Pro Cooler Bag provides the same superior cooling as Paragon's legendary fixed-cooler systems. It keeps drivers cool and mentally alert, especially during those final laps when heat fatigue and dehydration can be at their worst.

Paragon Viking Pro Cooler 12V Air and Water Cooler The Paragon Viking Pro 12V Cooler is the amped-up version of the regular Viking 12V Cooler. The Viking Pro Cooler is built to be durable and efficient with its 12-volt pump providing constant circulation of cold water through Paragon cooling garments. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. The side exit Guardian bulkhead connectors on the Viking Pro Cooler are Paragon’s emergency release option, allowing easy disconnection with a quick pull on the connected hose set or garment. The Viking Pro 12V Cooler is available in 12L or 18L capacity and works seamlessly with most cool suit brands. Paragon Pro 12V Cooler Dimensions 12 Liter: 10 lbs, 19" x 13" x 13" 18 Liter: 10 lbs, 19" x 13" x 13" Paragon cooling garments are sold separately.