C3 Carbon Products

C3 Carbon McLaren MP4-12C Carbon Fiber Shift Paddles Enhance the beauty of your MP4-12C cockpit with C3 Carbon shift paddles. C3's autoclaved, pre-impregnated dry carbon cfiber shift paddles install easily and fit perfectly, bringing you the beauty of carbon fiber every time you drive your McLaren. C3 has matched the OEM McLaren 3K twill weave for a perfect original factory appearance. Easy installation using incredibly strong 3M VHB 5952 double-sided tape makes this a must-have for any 12C owner. All 2012-15 McLaren MP4-12C models FEATURES: Autoclaved pre-preg dry 3K carbon fiber with OEM McLaren-matched twill weave. Clear-coated with automotive urethane, hand polished to a mirror finish Precise fit without any modification Installs in minutes using 3M VHB (Very High Bond) double-sided tape Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Side Skirts Made from aerospace-grade autoclaved dry carbon fiber and matched to the Ferrari factory's signature 1x1 3K plain weave pattern, these side skirts are a perfect match to the stunning carbon fiber on the 458. Ferrari can add them to your 458 build at the factory...for $9,000! You can easily install them yourself using only hand tools for a fraction of the factory cost, without sacrificing even the smallest bit of fitment, finish, or quality. Unlike many other brands, these are not carbon overlaid on fiberglass. C3 uses only 100% hand-laid pre-preg dry carbon fiber, formed in the autoclave at high pressure and temperature using billet aluminum molds. These Ferrari carbon fiber side skirts were originally developed using highly innovative fluid dynamics techniques and perfected in the wind tunnel in order to optimize the 458's aerodynamics. The lateral plane on each skirt plays a crucial role in reducing high-speed lift by minimizing air flowing from the side of the car into the underside. C3 Carbon's carbon fiber combines cosmetic appeal with outstanding technical performance, reducing the total weight of the car in the process. FEATURES: Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Engine Cover FREE SHIPPING! Beautiful carbon fiber replacement for the black plastic engine cover on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine cover installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece is the perfect upgrade to the Huracan engine room. Fitment: 2014+ Lamborghini Huracan FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products: Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel FITS: 2016+ Ferrari F488 GTB Coupe only Stunning carbon fiber panel to add a bit of flair to your 488 GTB engine bay. This piece installs against the firewall under the glass backlight, replacing the stock flat-black plastic trim. C3 Carbon uses ultra-precise CNC-machined billet moulds to create this incredible pre-preg dry carbon fiber replacement with quality, fit, and finish equaling expensive factory Ferrari carbon pieces. C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship at a reasonable price. Installation is simple. This piece can be paired with C3 Carbon engine surrounds in the Engine Bay Carbon Kit for a stunning upgrade of your car's engine bay. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Engine Bay Front Cover FITS: Lamborghini Huracan (2014+) Stunning carbon fiber replacement for the black plastic engine bay front trim on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine bay trim installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. Spectacular appearance and quality make this carbon fiber panel the perfect accent to the Huracan's engine room. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds Stunning carbon fiber engine cover panels are an excellent upgrade for your 488 GTB! Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine covers are a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a favorite our 488 GTB customers. For the complete carbon treatment for your whole 488 GTB engine room, see our Complete 488 Engine Kit. FITS: 2016+ Ferrari F488 GTB Coupe (for Spider, click here). FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Bay Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 Spider! Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses an autoclave to mould pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish that rival the factory carbon upgrade (for which Ferrari charges a fortune), bringing the 488 Spider engine room up to standard! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Straightforward installation makes this a very popular upgrade for our 488 Spider customers. FITS: 2016+ Ferrari F488 Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels Beautiful carbon fiber replacement for the black plastic trim panels surrounding the Lamborghini Huracan LP610's rear engine hatch. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panels install simply with no modification, bringing you the most accurate, beautiful fit and finish available anywhere. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of these carbon fiber piece adds so much flair to the engine cover of Lambo's one-of-a-kind Huracán. Fitment: 2014+ Lamborghini Huracán FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Install easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Engine Oil/Latch Cover Stunning carbon fiber engine accessory cover sits front and center in your 488 engine bay. Ferrari displays the 488's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic oil fill/latch cover (front-and-center under the bonnet) is a significant let down. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber replacement fits and functions as perfectly as the factory piece (for which Ferrari charges a fortune) and brings the 488 engine bay up to standard. C3 matched the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Easy installation makes this a must-have for any 488 owner. FITS: 2016+ Ferrari F488 GTB and Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Door Sills Gorgeous carbon fiber door sill plates for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber Sill Plates install easily and fit perfectly, bringing you the beauty of carbon fiber every time you step into your 488. C3 matches the OEM Ferrari 1x1 3K plain weave for an original Ferrari factory appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. FITS: 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Bonnet Latch Cover The factory trim piece that covers the Ferrari 458's bonnet latch (in the engine bay) is made of unattractive black plastic. This oversight detracts from the appearance of the engine bay (more so when it is surrounded by C3 Carbon Fiber Engine Covers). That's easily rectified with C3 Carbon Fiber Latch Cover. Made from aerospace-grade autoclaved dry carbon fiber, matched to Ferrari's traditional 1x1 3K plain weave pattern, it's a perfect match to Ferrari factory carbon or the C3 Carbon Fiber Engine Cover pieces. And it installs easily in minutes. FEATURES: Autoclaved pre-preg dry carbon fiber construction with 1x1 3k plain weave matching OEM Ferrari carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Urus Carbon Fiber Engine Bay Panels FITS: Lamborghini Urus/Urus S/Urus Performante (2019+)   Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out.  The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Urus Carbon Fiber Plenum FITS: Lamborghini Urus/Urus S/Urus Performante (2019+)   Spectacular gloss and matte carbon fiber replacement for the black plastic engine plenum cover on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out.  The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon  Lamborghini Urus Carbon Fiber Complete Engine Bay FITS: Lamborghini Urus/Urus S/Urus Performante (2019+) INTRODUCTION SALE: SAVE $500! Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Urus. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. We have combined matte and gloss finish on the plenum cover to make your Urus truly stand out.  The C3 carbon fiber engine bay is the perfect upgrade to show off the Urus's one-of-a-kind engine. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 2000 F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari California Carbon Fiber Front Splitter   Alright, gearheads and adrenaline junkies, gather 'round! If you're the kind of person who believes that the road (or track) isn't just a piece of tarmac but a canvas waiting for your masterpiece, then we have the pièce de résistance for your ride. You adore your Ferrari California, but deep down, you've always known there's room for that extra bit of oomph, right? Enter the magic of the C3 Carbon Ferrari California Front Splitter. This isn't just any regular upgrade; it's like turning your car from Clark Kent to Superman, all set for flight. Why Choose C3 Carbon? C3 Carbon isn't just a brand; it's a statement. We're talking about a piece so meticulously hand-laid that it's practically a work of art. It flawlessly matches the factory 1x1 3K plain weave, ensuring your Ferrari remains the epitome of luxury and speed. Deep Dive into Features: Authentic Autoclaved Pre-Preg Dry Carbon Fiber: This isn't your run-of-the-mill carbon fiber. It's the aristocracy of the carbon world. Matching Ferrari's factory specs, it's the real deal for those who never compromise on quality. Mirror, Mirror on the Wall: Our splitter isn't just functional; it's drop-dead gorgeous. Thanks to the automotive urethane clear-coat, hand polished to perfection, you'll be catching reflections and turning heads wherever you go. Tailored to Perfection: Our OEM-perfect fit ensures that adding this splitter feels like reuniting long-lost twins. It belongs with your Ferrari. Installation - Easier than Sunday Morning: No need to turn your peaceful garage into a war zone. Our splitter installs in mere minutes without any modifications. It's almost like plug and play. Precision is Our Game: Using advanced 3D laser scanning, we guarantee fitment that's nothing short of perfect. Craftsmanship at its Peak: Our splitters are formed in billet aluminum molds at more than 100 psi and 200°F, ensuring durability and precision. Swift as the Wind: Based in the USA, our FedEx delivery ensures your splitter reaches you in 1-4 days. Because who likes to wait? Always Ready for Action: Our vast inventory ensures we're always ready to roll, so you don't have to play the waiting game. The C3 Carbon Promise: While the market is crowded with substandard aftermarket offerings, C3 Carbon has carved a niche. Our commitment to weight reduction without compromising strength, ensuring unmatched quality, and delivering years of stunning finish sets us apart. And the cherry on top? Our prices won't burn a hole in your pocket. We're not just blowing our own trumpet here. Every product of ours uses premium dry carbon formed in a precision-engineered billet aluminum mold. It's stronger, lighter, and more robust than what most out there offer. And hey, with a UV-cured automotive urethane clear-coat, you can bid adieu to the fear of yellowing over time. Now, we know the competition is out there, playing with wet carbon or disguising fiberglass with a carbon overlay. But at C3 Carbon, we believe in pure, unadulterated quality. Because you and your Ferrari deserve nothing but the best. Final Pit Stop: Envision this: Your Ferrari California, roaring on the tracks, the front splitter slicing the wind like a knight's sword, all eyes on you. This isn't just a product; it's an experience, a statement, a thrill. 🚀 So, why wait? Dive headfirst into the world of supreme racing luxury.