C3 Carbon Products

GT2 RS Style Wing End Plates for the GT3 RS FITS: 991.1 & 991.2 Porsche GT3 RS C3 Carbon has created a GT2-Style, 100% dry carbon fiber rear-wing end plates that bolt directly to the factory GT3 RS wing! The OEM GT2 RS end plates use a completely different attachment system (adhesive) than the OEM GT3 RS end plates (bolt-on). But we love the look of the GT2 RS wing ends. So we married the two, giving our customers the look of the GT2 RS on their GT3 RS! The C3 Carbon end plates precisely match the uncompromising look, fitment, and finish of the factory Porsche carbon rear wing. They attach in exactly the same way as the OEM GT3RS end plates; no drilling, modifying, etc. required. Just bolt them up and go. C3 starts with 3D laser scanning to make an ultra-precise, CNC-machined aluminum billet mould for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are truly amazing! The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in either high-gloss or matte/satin automotive urethane clear coat, or satin black automotive coating. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Gloss clear, satin clear, or satin black finish available OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Carbon Fiber Wing End Plates For Porsche GT3 RS FITS: 991.1 and 991.2 Porsche GT3 RS C3 Carbon 100% carbon fiber rear-wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly.  C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. There's no modification, drilling, etc. needed -- the C3 Carbon parts are ready to bolt on. The look, however, is pure carbon fiber!  These really are the pieces Porsche should have put on the GT3 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Easy bolt-on, no modifications required Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler Upgrade your F12's rear end with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber rear spoiler from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon rear spoiler is fully functional, installs easily, and dramatically upgrades the look of your F12 Berlinetta! FITS Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser Replace the heavy, fragile fiberglass diffuser on the rear on your Ferrari 488 with a strong, lightweight, beautifully crafted carbon fiber rear diffuser from C3. The 488's heavy, drab-black factory diffuser belies the car's Formula 1 roots, adding unnecessary weight aft of the rear axles. Naturally, Ferrari offers a carbon fiber replacement -- for over $10,000! C3 Carbon uses an autoclave to create our pre-impregnated (pre-preg) dry carbon fiber 488 diffuser for uncompromising quality, fitment, and finish. All at a fraction of the cost of the Ferrari piece. C3 have perfectly matched the OEM Ferrari 1x1 3K plain carbon fiber weave to make a stunning diffuser that is functional, beautiful, and durable. A common complaint among 488 drivers is the factory diffuser being easily and irreparably damaged during everyday driving. Not only is the C3 Carbon rear diffuser more robust in this regard, but the fins are individually replaceable should one be scuffed or damaged. Not so with the Ferrari piece. FITS: 2016+ Ferrari 488 GTB FEATURES: Autoclaved pre-preg dry carbon fiber in a 1x1 3K plain weave identical to factory Ferrari carbon fiber Weighs 67% less than the original fiberglass Ferrari piece  Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit with ground clearance equal to the original factory diffuser Installs easily in minutes with no modification to your 488 Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Rear Fog Light Cover Very cool carbon fiber rear fog lamp cover for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber process results in a stunning piece that installs easily and fits perfectly, adding a dash of drama to the rear of your 488. C3 matches the factory Ferrari 1x1 3K plain weave for a perfectly original Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. Especially complementary to the C3 Carbon Fiber Rear Diffuser for the Ferrari 488. FITS: 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari California Carbon Fiber Engine Bay  FITS: 2009-2014 Ferrari California Alright, racing enthusiast,Just when you were soaking in all the admiring glances for your Ferrari California on the track, we're about to dial up your car's charisma to a whole new level. Introducing the carbon fiber engine bay trim panels, meticulously crafted to make your engine bay (and honestly, your heart) absolutely swoon! We all adore how Ferrari masterfully showcased the California's V8 marvel beneath that pristine glass bonnet. But let's have a real chat - that stock black plastic engine trim? It's like wearing socks with sandals at a fashion show. Unexpected and a tad out of place. But worry not, because C3 Carbon is all set to change the narrative. Unveiling The C3 Carbon Magic: Authentic Ferrari Vibes: By replicating Ferrari's iconic 1x1 3K plain weave, we're offering the sheer elegance and charisma of an authentic Ferrari accessory, but without making your wallet cry rivers. Easy-Peasy Installation: Think of it as a snap-on accessory for your engine. Our installation process is so straightforward, it'll feel like child's play. Customized Just for You: Created and tailored exclusively for the Ferrari California, ensuring that it nestles in perfectly, as if it was always meant to be there. Still Not Convinced? Here's More: Showroom Shine: Thanks to our painstakingly hand-polished, automotive urethane clear coat, your engine bay won't just gleam; it'll dazzle and command attention wherever you go. Precision at Its Peak: Our digitally 3D laser scanned designs ensure a seamless fit, making it feel like the very essence of perfection. Built Like a Tank: With our dedicated crafting process in billet aluminum molds, combined with rigorous conditioning, this isn't some flimsy piece of decor; it's a robust upgrade that's here to stay. The C3 Carbon Promise: In the adrenaline-pumping universe of racing and roaring engines, C3 Carbon stands tall as a beacon of quality and unmatched style. While others might attempt to bait you with cheaper, inferior options, our unwavering commitment to top-tier quality, durability, and sheer panache sets us apart. Our avant-garde manufacturing techniques and dedication to sourcing only the best materials promise you're driving away with nothing short of the best.  Note does not include Airbox

C3 Carbon Ferrari California Carbon Fiber Airbox Cover FITS: 2009-2014 Ferrari California Picture this: You're at cars and coffee, and a group of fellow enthusiasts are ogling at your Ferrari California. They're drooling over that stunning V8 under the bonnet. But wait! What's that black plastic monstrosity sitting atop that work of art? Oh, no, you didn't! Don't let a factory default steal your thunder. Enter the C3 Carbon Ferrari California Carbon Fiber Airbox Cover – where style meets functionality. It's not just about looking good (though, trust us, you're going to look real good). It's about enhancing your engine's elegance without emptying your pockets. Because, let's be real: who wants to pay the "Ferrari price tag" for every accessory? Features and Benefits: OEM Look, Without the OEM Price: With a 1x1 carbon weave, this beauty looks just like the Ferrari original. No one will know you didn't break the bank (and we won't tell). Easy Peasy Installation: No PhD in mechanics needed. Remove the oem pieces and repalce with teh C3 carbon fiber parts.   Quality You Can Feel: Made with autoclaved pre-preg dry carbon fiber 1x1 3K plain weave, it's an exact match to Ferrari's factory carbon. So, go ahead, give it a tap. Feels solid, right? Shiny, Shiny!: Our automotive urethane protection ensures this cover stays gleaming. And with a hand-polished, mirror finish, you might just need sunglasses every time you pop the hood. No Guesswork: With a digitally 3D laser scanned design, it's a guaranteed fit. We're talking glove-like. Strength and Durability: Made using billet aluminum molds under intense conditions, this cover is built to withstand the test of time... and speed! Why C3 Carbon Stands Out: While others might try to woo you with cheaper materials and processes, C3 Carbon is all about top-tier quality. We're not just making products; we're crafting experiences. Dry carbon, which is more robust and significantly lighter than its counterparts, ensures your engine doesn't get bogged down with unnecessary weight. And with our automotive urethane coat, your airbox cover will look as good as new, year after year. Many competitors might lure you in with the flashiness of wet carbon or the affordability of fiberglass with a carbon overlay. But don't be deceived. They're heavier, weaker, and just don't meet the C3 Carbon standard. Time to Make a Statement Don't let your Ferrari California be just another pretty face in the crowd. Elevate its elegance, charm, and performance with the C3 Carbon Ferrari California Carbon Fiber Airbox Cover. Experience the distinction, feel the quality, and relish the admiration.

C3 Carbon Ferrari California Carbon Fiber Front Splitter FITS: 2009-2014 Ferrari California Alright, gearheads and adrenaline junkies, gather 'round! If you're the kind of person who believes that the road (or track) isn't just a piece of tarmac but a canvas waiting for your masterpiece, then we have the pièce de résistance for your ride. You adore your Ferrari California, but deep down, you've always known there's room for that extra bit of oomph, right? Enter the magic of the C3 Carbon Ferrari California Front Splitter. This isn't just any regular upgrade; it's like turning your car from Clark Kent to Superman, all set for flight. Why Choose C3 Carbon? C3 Carbon isn't just a brand; it's a statement. We're talking about a piece so meticulously hand-laid that it's practically a work of art. It flawlessly matches the factory 1x1 3K plain weave, ensuring your Ferrari remains the epitome of luxury and speed. Deep Dive into Features: Authentic Autoclaved Pre-Preg Dry Carbon Fiber: This isn't your run-of-the-mill carbon fiber. It's the aristocracy of the carbon world. Matching Ferrari's factory specs, it's the real deal for those who never compromise on quality. Mirror, Mirror on the Wall: Our splitter isn't just functional; it's drop-dead gorgeous. Thanks to the automotive urethane clear-coat, hand polished to perfection, you'll be catching reflections and turning heads wherever you go. Tailored to Perfection: Our OEM-perfect fit ensures that adding this splitter feels like reuniting long-lost twins. It belongs with your Ferrari. Installation - Easier than Sunday Morning: No need to turn your peaceful garage into a war zone. Our splitter installs in mere minutes without any modifications. It's almost like plug and play. Precision is Our Game: Using advanced 3D laser scanning, we guarantee fitment that's nothing short of perfect. Craftsmanship at its Peak: Our splitters are formed in billet aluminum molds at more than 100 psi and 200°F, ensuring durability and precision. Swift as the Wind: Based in the USA, our FedEx delivery ensures your splitter reaches you in 1-4 days. Because who likes to wait? Always Ready for Action: Our vast inventory ensures we're always ready to roll, so you don't have to play the waiting game. The C3 Carbon Promise: While the market is crowded with substandard aftermarket offerings, C3 Carbon has carved a niche. Our commitment to weight reduction without compromising strength, ensuring unmatched quality, and delivering years of stunning finish sets us apart. And the cherry on top? Our prices won't burn a hole in your pocket. We're not just blowing our own trumpet here. Every product of ours uses premium dry carbon formed in a precision-engineered billet aluminum mold. It's stronger, lighter, and more robust than what most out there offer. And hey, with a UV-cured automotive urethane clear-coat, you can bid adieu to the fear of yellowing over time. Now, we know the competition is out there, playing with wet carbon or disguising fiberglass with a carbon overlay. But at C3 Carbon, we believe in pure, unadulterated quality. Because you and your Ferrari deserve nothing but the best. Final Pit Stop: Envision this: Your Ferrari California, roaring on the tracks, the front splitter slicing the wind like a knight's sword, all eyes on you. This isn't just a product; it's an experience, a statement, a thrill. 🚀 So, why wait? Dive headfirst into the world of supreme racing luxury.