Competition Motorsport
Titanium Lug Bolts for Ferrari GT4C Lusso (Set of 10)
$497.00
$711.00
Competition Motorsport Titanium Wheel Lug Bolts for Ferrari GT4C Lusso
Priced and sold in sets of ten wheel lug bolts. Enough for one axle.
These Wheel Lug Bolts Fit The Following Cars:
Ferrari GTC4 Lusso (2016-2020)
The Best, Strongest Lug Bolts For Ferrari GT4C Lusso
This titanium lug bolt set from Competition Motorsport is designed and manufactured specifically for your Ferrari. Each bolt is machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength and extraordinarily light weight (half the weight of high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for maximum strength, precision, and durability.
Custom Bolt Lengths Available For Wheel Spacers for your Ferrari GT4C Lusso
Competition Motorsport Titanium Lug Bolts come in both OEM length (50mm) and longer lengths (65mm and 70mm for 15mm and 20mm spacers respectively) if you are using wheel spacers.
Specifications of Competition Motorsport Titanium Lug Bolts for your Ferrari GT4C Lusso
Grade 5 Ti-6AL-4V Titanium Alloy
Yield Strength: 128,000 psi
Ultimate Tensile Strength: 138,000 psi
Shear Strength: 79,800 psi
Density: 0.160 lb/in3
Extremely high resistance to corrosion and low heat conductivity.
NOTE:Â This is one set of 10 lug bolts for your Ferrari GT4C Lusso. Two sets are required for one car.
Competition Motorsport
Titanium Lug Bolts for Ferrari Roma (Set of 10)
$497.00
$711.00
Competition Motorsport Titanium Wheel Lug Bolts for Ferrari Roma
Priced and sold in sets of ten wheel lug bolts. Enough for one axle.
These Wheel Lug Bolts Fit The Following Cars:
Ferrari Roma (2021+)
The Best, Strongest Lug Bolts For Ferrari Roma
This titanium lug bolt set from Competition Motorsport is designed and manufactured specifically for your Ferrari. Each bolt is machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength and extraordinarily light weight (half the weight of high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for maximum strength, precision, and durability.
Custom Bolt Lengths Available For Wheel Spacers for your Ferrari Roma
Competition Motorsport Titanium Lug Bolts come in both OEM length (50mm) and longer lengths (65mm and 70mm for 15mm and 20mm spacers respectively) if you are using wheel spacers.
Specifications of Competition Motorsport Titanium Lug Bolts for your Ferrari Roma
Grade 5 Ti-6AL-4V Titanium Alloy
Yield Strength: 128,000 psi
Ultimate Tensile Strength: 138,000 psi
Shear Strength: 79,800 psi
Density: 0.160 lb/in3
Extremely high resistance to corrosion and low heat conductivity.
NOTE
This is one set of 10 lug bolts for your Ferrari Roma. Two sets are required for one car.
Competition Motorsport
Titanium Lug Bolts for Ferrari SF90 (Set of 10)
$497.00
$711.00
Competition Motorsport Titanium Wheel Lug Bolts for Ferrari SF90
Priced and sold in sets of ten wheel lug bolts. Enough for one axle.
These Wheel Lug Bolts Fit The Following Cars:
Ferrari SF90 (2021+)
The Best, Strongest Lug Bolts For Ferrari SF90
This titanium lug bolt set from Competition Motorsport is designed and manufactured specifically for your Ferrari. Each bolt is machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength and extraordinarily light weight (half the weight of high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for maximum strength, precision, and durability.
Custom Bolt Lengths Available For Wheel Spacers for your Ferrari SF90
Competition Motorsport Titanium Lug Bolts come in both OEM length (50mm) and longer lengths (65mm and 70mm for 15mm and 20mm spacers respectively) if you are using wheel spacers.
Specifications of Competition Motorsport Titanium Lug Bolts for your Ferrari SF90
Grade 5 Ti-6AL-4V Titanium Alloy
Yield Strength: 128,000 psi
Ultimate Tensile Strength: 138,000 psi
Shear Strength: 79,800 psi
Density: 0.160 lb/in3
Extremely high resistance to corrosion and low heat conductivity.
NOTE
This is one set of 10 lug bolts for your Ferrari SF90. Two sets are required for one car.
Totim
Totim Racing Self-Contained Foam Seat (Insert Legs, lumbar or back area)
from $355.00
Totim Racing Self-Contained Foam Seat Insert Kits
Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day.
Fast, clean, and FIA fire-resistant
Features
• Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting.
• No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position.
• Fire-resistant outer bag meets FIA requirements; no additional cover is needed.
• Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break.
• T3096 series Ideal for tight cockpits or as a liner/insert inside a seat shell or extractable seat - large/medium/small driver and for seat shell padding designed to fit under legs, lumbar or back areaÂ
Totim Racing Foam Seat Insert FAQs:
How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes.
Do I need protective gear while using it? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals.
Can the insert be trimmed after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels.
Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance.
Create a professional-grade, custom-fitted seat insert quickly and cleanly—i is Ideal for tight cockpits or as a liner/insert inside a seat shell or extractable seat - large/medium/small driver and for seat shell padding designed to fit under legs, lumbar or back area
Totim
Totim Racing Self-Contained Foam Seat Insert Kits for F4, Radical, GT, WRC, Prototypes
$611.00
Totim Racing Self-Contained Foam Seat Insert KitsÂ
Totim Racing has changed the game for custom-fit racing seats with their self-contained foam insert kits. No messy chemicals, no extra coverings, and no need for helpers—just a fire-resistant FIA-approved bag that molds to you in under 30 minutes. Perfect for pros and serious track-day drivers who want a secure fit without the hassle.
Fast, Clean, and FIA Fire-Resistant
Features
• Pre-packaged, pre-measured 2-part polyurethane mix expands cleanly inside the sealed bag.
• No tools required—simply knead the pouch, place it in the cockpit, and let the foam expand.
• Fire-resistant outer bag meets FIA safety standards with no additional cover needed.
• Fully cured and ready to trim or race within 40 minutes—fast enough to complete during a lunch break.
• T3090 Series includes a 140 x 100 cm bag, large enough for wrap-around inserts with lateral leg support in  F4, Radical, GT, WRC, Prototypes cockpits.
Totim Racing Foam Seat Insert FAQs:
How long does the Totim foam insert take to make? The complete molding process takes around 30 minutes, with full curing in 40 minutes.
Do I need to wear protective gear while using it? No—the chemicals remain sealed inside the FIA-approved fire-resistant bag. You never touch them.
Can the insert be trimmed after curing? Yes, once cured, the foam can be trimmed to fine-tune the fit.
Create a professional-grade custom racing seat insert quickly, safely, and without the mess. Get the fit you need to stay focused and secure on track with Totim Racing.
Totim
Totim Racing Self-Contained Foam Seat Insert Kits for F2, F3, FORMULA RENAULT, INDYCAR SERIES
$711.00
Totim Racing Self-Contained Foam Seat Insert Kits
Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day.
Fast, clean, and FIA fire-resistant
Features
• Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting.
• No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position.
• Fire-resistant outer bag meets FIA requirements; no additional cover is needed.
• Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break.
• T3093 series uses a trapezoid bag (140 length × 100 × 85 cm) sized for deep, wrap-around inserts in many F2, F3, Formula Renault, and Indy-style cockpits.
Recommended for F2, F3, Formula Renault, IndyCar (trapezoid 140 × 100 × 85 cm)
Totim Racing Foam Seat Insert FAQs:
How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes.
Do I need protective gear during fitting? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals.
Can I trim the insert after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels.
Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance.
Create a professional-grade, custom-fitted seat insert quickly and cleanly—ideal comfort and stability for F2, F3, Formula Renault, and IndyCar-style cockpits.
Totim
Totim Racing Self-Contained Foam Seat Insert Kits for GT, NASCAR, WRC
$526.00
Totim Racing Self-Contained Foam Seat Insert Kits
Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day.
Fast, clean, and FIA fire-resistant
Features
• Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting.
• No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position.
• Fire-resistant outer bag meets FIA requirements; no additional cover is needed.
• Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break.
• T3094 series uses a 100 × 90 cm bag sized for GT, NASCAR, and WRC-style seats where a compact wrap-around insert is preferred.
Totim Racing Foam Seat Insert FAQs:
How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes.
Do I need protective gear while using it? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals.
Can the insert be trimmed after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels.
Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance.
Create a professional-grade, custom-fitted seat insert quickly and cleanly—ideal comfort and stability for GT, NASCAR, and WRC applications.
Totim
Totim Racing Self-Contained Foam Seat Insert Kits for LMP3, LMP4, F2, F3,SUPER FORMULA, FORMULA RENAULT, INDYCAR
$711.00
Totim Racing Self-Contained Foam Seat Insert Kits
Totim Racing simplifies custom-fit race seat inserts with a sealed, self-contained foam system. No loose chemicals, no extra covers, and no helper required—the FIA fire-resistant bag molds to the driver in about 30 minutes and cures fully in roughly 40 minutes, so you can fit and race the same day.
Fast, clean, and FIA fire-resistant
Features
• Pre-packaged, pre-measured two-part polyurethane expands cleanly inside the sealed bag for zero-mess fitting.
• No tools needed—knead the pouch to mix, place in the cockpit, and let it expand around the driver’s position.
• Fire-resistant outer bag meets FIA requirements; no additional cover is needed.
• Ready to trim or race in about 40 minutes—quick enough to complete during a lunch break.
• T3092 series uses a 140 × 100 cm bag sized for wrap-around inserts with lateral leg support in LMP3, F3, F2, Super Formula, Formula Renault, and Indy-style cockpits.
Totim Racing Foam Seat Insert FAQs:
How long does the Totim foam insert take to make? The molding process takes about 30 minutes; full curing is approximately 40 minutes.
Do I need protective gear while using it? No. The components remain sealed inside the FIA fire-resistant bag; you never handle the chemicals.
Can the insert be trimmed after curing? Yes. After curing, you can trim to fine-tune fit and edge clearance around belts and cockpit panels.
Does the kit require a helper? No. The sealed-bag design lets one person mix, position, and mold the insert without assistance.
Create a professional-grade, custom-fitted seat insert quickly and cleanly—ideal comfort and stability for LMP3, LMP4, and formula-style cockpits.
Trac-Com
Trac-Com Adapter Cables
$79.00
Trac-Com Adapter Cables
A Trac-Com Adapter Cable is the perfect addition to your Trac-Com Intercom System. This cable is designed to connect the Trac-Com Intercom System Base Unit (sold separately) to your in-helmet communications. and features a locking 5-pin connector for a secure connection. With a length of 4 feet, this premium quality cable is manufactured and tested in the USA to ensure top-notch performance.
Choose from three different helmet connectors - Stilo, NASCAR, or IMSA - to suit your specific needs. This versatile adapter cable is a must-have for any serious racer looking to enhance their communication system. Don't settle for subpar cables, trust in the Trac-Com Adapter Cables for a reliable and efficient connection every time.
Upgrade your racing experience with the Trac-Com Adapter Cables, available now at Competition Motorsport. Don't miss out on this essential piece of equipment for your Trac-Com Intercom System. Order yours today and take your racing to the next level!
Trac-Com
Trac-Com Boom Mic
from $113.00
Trac-Com Boom Mic
The Ultimate Solution for Racing Intercoms
Introducing the Trac-Com Portable Boom Mic/Speaker Headset, the answer to years of frustration with person-to-person racing intercom systems. This state-of-the-art intercom system is designed from the ground up to offer superior sound and reliability. Made and tested in the USA, the Trac-Com is the best solution for racing intercoms and driver to passenger communications.
The portable boom mic/speaker headset is a flexible solution for driver-passenger communication. It is designed to provide crystal clear sound and is compatible with various communicator systems. You can choose your 4ft cable with a NASCAR, IMSA, Stilo, Chatterbox, or Trac-Com connector plug to work seamlessly with your existing system.
Say goodbye to frustrating intercom systems and hello to the Trac-Com Boom Mic. Experience the ultimate in driver-passenger communication and take your racing experience to the next level. Get your Trac-Com Boom Mic today and enjoy the best in sound and reliability.
Trac-Com
Trac-Com Chaser Adapter Cables
$79.00
Trac-Com Chaser Adapter Cables
Introducing the Trac-Com Chaser Adapter Cables, the perfect accessory for your Trac-Com Chaser system. These adapter cables feature a locking 5-pin connector that easily plugs into the Trac-Com intercom base unit (available separately or as a kit). With a cable length of five feet, you'll have plenty of room to move around without feeling restricted.
These premium-quality cables are proudly manufactured and tested in the USA, ensuring top-notch performance and durability. You can choose from either male (Stilo) or female (IMSA/Roux) cable ends, depending on your helmet connector type. Each cable is priced individually, so you can purchase as many as you need for your specific setup.
Upgrade your Trac-Com Chaser system with these reliable and high-quality adapter cables. Don't settle for anything less than the best when it comes to your racing equipment. Order yours today and experience the difference!
Trac-Com
Trac-Com Chaser Bluetooth Lead Follow Package
$213.00
Trac-Com Chaser Bluetooth Lead/Follow Package
BLUETOOTH BOXES ARE SOLD AS A PAIR: Select adapter cables from pull-down menu. Please Note: Trac-Com Chaser is not yet compatible with the Garmin Catalyst.
2020 brought unique challenges and changes to the sport we all love. With limited options for in car instruction, the Lead/Follow model has taken its place for high performance driving events. The Trac-Com Chaser is an affordable bluetooth communication link for those looking to receive driving feedback without having someone in the passenger seat. The adjustable volume keys on the unit allow for quick, on the fly audio adjustment without having to reach for a phone! Reliable Bluetooth 5.1 ensures low latency and terrific audio quality. A Lithium Ion Polymer battery is used to avoid any potentially dangerous overheating issues.
Basic Features
Compatible with all Trac-Com adapter cables and accessories
Rechargeable battery
Digital Lithium Ion Polymer battery delivers 10 hours of use
Compact size, lightweight at 0.9 oz
Built with traditional Trac-Com durability
Bluetooth 5.1 technology
How Does It Work?
Each driver starts by connecting one chaser unit to their personal cell phone – it is important that the Chasers are paired one at a time to avoid accidentally pairing the wrong device. To initiate the pairing mode, hold down the power button for a few seconds. The device will appear on the BT pairing screen on the phone, laptop, or other device. Each driver then connects either a Trac-Com Student headset or an integrated helmet kit to their corresponding Chaser unit (optional adapter cable required for integrated kits). With both devices properly setup, the Student and Instructor will use the paired phones to communicate with a phone call or any other audio sharing application on their phone. There are many different uses for this product and your phone or computer is the limit. Units are not able to be paired together.
What's Included?
The Lead / Follow Package includes two units (one for the student and one for the instructor), a USB charging cable
Trac-Com
Trac-Com Ear Bud Connector Helmet Clip
$50.00
Trac-Com Ear Bud Connector Helmet Clip
The Trac-Com Ear Bud Connector Clip was designed to securely attach the Trac-Com 3.5MM earbud connector onto the side of a helmet without the need for drilling. This innovative clip comes in two versions, one for carbon helmets and one for composite helmets, making it a versatile option for a variety of helmet types. While it fits many helmets, please note that it may not work with every model.
Trac-Com Ear Bud Connector Clip Features
Universal clip that works with most helmets
Simple, secure fitment to your helmet
No drilling required for installation
Available in two versions for either carbon fiber or composite helmets
Trac-Com
Trac-Com Foam Earbuds
$140.00
Trac-Com Foam Earbuds
For the purpose of hygiene and safety, this product is not eligible for return.
Experience professional style communication while racing with Trac-Com Foam Earbuds. These earbuds are designed specifically for racers, providing clear and comfortable hearing during intense races.
When paired with the Trac-Com Pro Helmet Kit, these foam earbuds offer top-notch communication capabilities, allowing you to stay connected with your team and receive important instructions without any distractions.
Trac-Com Foam Earbud Features
Structured for optimal fit and comfort
Clear and crisp sound quality
Compatible with Trac-Com Pro Helmet Kit
Don't let poor communication hinder your performance on the track. Upgrade to Trac-Com Foam Earbuds and experience the difference in your racing experience. Order now and take your racing game to the next level!
Trac-Com
Trac-Com Helmet Speaker Kit V2
$188.00
Trac-Com Helmet Speaker Kit V2
This versatile helmet kit is a must-have for any driver looking to enhance their racing experience. Designed by RaceCom, the V2 Helmet Kit is a universal solution that can be easily installed on most motorsport helmets, regardless of size or shape. It includes the V2 Helmet Kit and an IMSA male cable end, making it a complete package for instructors.
So, what sets the V2 kit apart? It incorporates the latest technology and lessons learned from the V2 Student headset to provide the loudest, most complete, and highest quality sound. The new R7 digital microphone and powerfully tuned speakers are built into a compact package that can be quickly and comfortably installed on any helmet.
Trac-Com Helmet Speaker Kit V2 Features
Two powerfully tuned speakers
New R7 digital microphone
Male IMSA plug on headset
Strong, sturdy RaceCom cables that have been pull-tested by a certified lab
Meticulous build process proven to outlast and outperform all others
Includes:
Helmet Speaker Kit V2
Trac-Com
Trac-Com IMSA Coiled Cable Helmet Kit
$136.00
Trac-Com IMSA Coiled Cable Helmet Kit
The Trac-Com IMSA Coiled Cable Helmet Kit is a must-have for professional customers. This kit includes a custom designed digital noise canceling mic, specialized earbud jack, and modular coiled IMSA connector. Our meticulous build process has been proven to outlast and outperform all others in the business. With the Trac-Com IMSA Coiled Cable Helmet Kit, you can easily add communications to any helmet. Please note that ear buds are not included with this kit.
Trac-Com IMSA Coiled Cable Helmet Kit SKU: R HK IMSA SCC
