GiroDisc Front Brake Rotors – Nissan 350Z / Infiniti G35 with Brembo Brakes

Upgrade your Nissan 350Z or Infiniti G35 factory Brembo braking system with GiroDisc Two-Piece Floating Front Brake Rotors. Designed as direct replacements for the original front rotors on vehicles equipped with Brembo calipers, these premium brake assemblies reduce unsprung weight and rotating mass while delivering outstanding cooling performance, durability, and braking consistency.
Manufactured in Bellingham, Washington, GiroDisc rotors combine proprietary high-carbon iron friction rings with lightweight 6061-T6 aluminum hats and race-ready floating hardware. Whether you're improving your daily driver's braking performance or preparing your Nissan or Infiniti for demanding track sessions, GiroDisc provides a serviceable, performance-focused alternative to conventional one-piece rotors.
Premium Two-Piece Floating Brake Rotors for Nissan 350Z and Infiniti G35
The GiroDisc A1-013 front rotor assembly is engineered specifically for Nissan 350Z and Infiniti G35 applications equipped with factory Brembo brake calipers. Its two-piece design allows the iron rotor ring and aluminum mounting hat to work together while accommodating thermal expansion during repeated heavy braking.
Unlike conventional one-piece brake rotors, GiroDisc assemblies feature reusable aluminum hats. When the friction rings eventually reach their wear limit, compatible replacement rings can be installed without purchasing entirely new rotor assemblies.
The internal 48-vane curved ventilation system improves heat evacuation during braking. As the rotor spins, the curved vanes move cooling air outward from the center of the disc, helping control operating temperatures during aggressive driving.
GiroDisc A1-013 Front Rotor Features
-
Direct Replacement Design: Engineered for Nissan 350Z and Infiniti G35 vehicles equipped with Brembo front calipers.
-
Two-Piece Floating Construction: High-carbon iron rotor rings paired with lightweight aluminum mounting hats.
-
Reduced Rotating Mass: Two-piece construction helps reduce unsprung weight and rotational inertia.
-
Proprietary High-Carbon Iron: Specialized metallurgy engineered to withstand demanding braking conditions.
-
48 Curved Cooling Vanes: Internal ventilation promotes airflow and heat dissipation.
-
6061-T6 Aluminum Hats: Precision-machined aluminum hats with a protective black anodized finish.
-
High-Strength Drive Pins: Cadmium-plated steel alloy drive hardware provides strength and corrosion resistance.
-
Race-Ready Floating Hardware: Spring clips and washers allow controlled floating movement while minimizing unwanted noise.
-
Reusable Rotor Hats: Replace worn iron rings without replacing the complete mounting assemblies.
-
Serviceable Design: Compatible with GiroDisc D1-357 replacement rings.
-
Made in the USA: Major rotor components are manufactured in GiroDisc's Bellingham, Washington facility using domestically sourced materials.
-
Street and Track Versatility: Designed for demanding performance driving while remaining suitable for street applications.
GiroDisc A1-013 Front Brake Rotor Specifications
| Manufacturer |
GiroDisc |
| Part Number / SKU |
A1-013 |
| Product Type |
Two-Piece Floating Brake Rotor Assembly |
| Rotor Position |
Front |
| Rotor Outside Diameter |
324 mm |
| Rotor Thickness |
30 mm |
| Minimum Rotor Thickness |
28 mm |
| Rotor Weight |
16.5 lbs per rotor assembly |
| Cooling Vane Count |
48 Curved Vanes |
| Rotor Ring Material |
Proprietary High-Carbon Iron |
| Rotor Hat Material |
6061-T6 Aluminum |
| Hat Finish |
Black Anodized |
| Drive Pin Material |
High-Strength Steel Alloy |
| Drive Pin Finish |
Cadmium-Plated |
| Floating Hardware |
Spring Clips and Spring Washers |
| Replacement Rotor Rings |
GiroDisc D1-357 |
| Caliper Compatibility |
Brembo Front Brake Calipers |
| Manufacturing Location |
Bellingham, Washington, USA |
| Intended Use |
Performance Street Driving and Track Use |
Vehicle Fitment
-
Nissan 350Z – Models equipped with the applicable factory Brembo front brake system.
-
Infiniti G35 – Models equipped with the applicable factory Brembo front brake system.
Important Fitment Note: These rotors are designed for vehicles equipped with Brembo front brake calipers. They are not intended as direct replacements for non-Brembo brake configurations. Verify your vehicle's brake package before ordering.
Replaceable GiroDisc D1-357 Front Rotor Rings
One major advantage of the GiroDisc two-piece braking system is its reusable aluminum mounting hat. Once the rotor rings reach their service limit, the existing hats can be reused with the appropriate GiroDisc D1-357 Replacement Rings, helping reduce long-term replacement costs.
GiroDisc recommends replacing the rotor rings when they reach the specified 28 mm minimum thickness or if a crack develops and extends to the outer edge of the ring.
GiroDisc Nissan 350Z / Infiniti G35 Front Rotor FAQs
Will these GiroDisc front rotors fit every Nissan 350Z?
No. The GiroDisc A1-013 rotor assemblies are designed for Nissan 350Z models equipped with the compatible Brembo front brake system. Vehicles with standard non-Brembo brakes require a different rotor application.
Will these rotors fit an Infiniti G35 with Brembo brakes?
Yes. The GiroDisc A1-013 front rotors are designed for compatible Infiniti G35 applications equipped with Brembo front brake calipers.
What size are the GiroDisc A1-013 front brake rotors?
These rotors have a 324 mm outside diameter and a nominal thickness of 30 mm. The minimum allowable rotor thickness is 28 mm.
How much does each GiroDisc A1-013 rotor weigh?
Each complete rotor assembly weighs approximately 16.5 pounds, including its high-carbon iron friction ring and aluminum mounting hat.
What makes GiroDisc two-piece rotors better suited for performance driving?
The two-piece construction reduces rotating mass, accommodates thermal expansion, and provides enhanced cooling through its 48 curved internal ventilation vanes. These characteristics help support braking consistency during demanding driving.
Are the GiroDisc rotor hats reusable?
Yes. The 6061-T6 aluminum hats are designed to be reused when the iron rotor rings require replacement, provided the hats and hardware remain serviceable.
What replacement rotor rings fit GiroDisc A1-013?
The compatible replacement ring part number is GiroDisc D1-357.
When should I replace the GiroDisc rotor rings?
GiroDisc recommends replacing the rings when they reach the minimum thickness of 28 mm or if a crack extends to the edge of the rotor ring.
Are GiroDisc A1-013 brake rotors suitable for street driving?
Yes. Their spring-loaded floating hardware is engineered to provide race-ready movement while minimizing the noise commonly associated with loosely floating racing rotor assemblies.
Where are GiroDisc brake rotors manufactured?
GiroDisc manufactures its major rotor components, including aluminum hats, iron rotor rings, and drive pins, at its facility in Bellingham, Washington, using domestically sourced materials.